cpet
/
openbsd-ports
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
openbsd-ports/lang/python/python.port.mk

385 lines
13 KiB
Makefile
Raw Blame History

# python.port.mk - Xavier Santolaria <xavier@santolaria.net>
# This file is in the public domain.
CATEGORIES += lang/python
# define the default versions
MODPY_DEFAULT_VERSION_2 = 2.7
MODPY_DEFAULT_VERSION_3 = 3.10
# If switching to a new MODPY_DEFAULT_VERSION_3, say 3.x to 3.y:
# - All ports with a run/lib dep on python must be REVISION-bumped.
# - Move PY_DEFAULTONLY and --with-ensurepip=no from 3.x/Makefile
# to 3.y/Makefile (remove from old, add to new), regenerate PLISTs
# to add/remove "ensurepip" files.
# - In 3.x/Makefile and 3.y/Makefile, bump REVISION for -main and -idle
# (i.e. those PLISTs with "PY_DEFAULTONLY" lines)
# - In 3.y/PLIST-main and 3.y/PLIST-idle add a @conflict on the old
# REVISION of the old version. For example, for the 3.8->3.9 switch,
# 3.8 -main was 3.8.12p2 and -idle was 3.8.12, so the following
# were needed:
# PLIST-main: @conflict python->=3,<3.8.12p3
# PLIST-idle: @conflict python-idle->=3,<3.8.12p0
# (Bear in mind that the subpackages might have different REVISIONs)
# - In 3.x (old default) add a conflict marker with the old versions of
# py3-pip and py3-setuptools (bin/pip3.x and lib/python3.x files were
# in pip/setuptools packages but will now be in python3.x "ensurepip"
# files)
# - Keep xenocara/share/mk/bsd.xorg.mk PYTHON_VERSION in sync
# If later *removing* an old version:
# - *move* the numbered @conflict python-*->=3.2,<3.x to the new version
# and update e.g. to @conflict python-*->=3.2,<3.y
# - *move* the @pkgpath markers to the new version and add a new one for
# the old version you have just retired.
# - bump revision for any plists that have changed
# In all cases:
# - keep the @conflict python-*-${VERSION_SPEC} PLIST lines as-is, they are
# there to override the "@option no-default-conflict" and set automatically
# from the variable defined in 3.x/Makefile.
# - after a change to PLISTs (or dependencies etc) in -current, keep
# the package version in -current higher than in -stable for the
# previous version (i.e. change made in 7.1-current -> REVISION
# must be set higher in 7.1-current/7.2 than 7.1-stable and this
# needs to be kept when Python is updated in -stable)
# Also note:
# - Some subpackages e.g. -idle have a conflict on an old version of the main
# package e.g. "@conflict python->=3.6,<3.6.8p0", this is due to a file
# moving between subpackages in the past.
.if !defined(MODPY_VERSION)
FLAVOR ?=
. if !defined(FLAVORS) || !${FLAVORS:Mpython3} || ${FLAVOR:Mpython3}
# for standard "python3-flavoured" ports (normal for py-* modules),
# set the default MODPY_VERSION for the usual py3 version
MODPY_VERSION ?= ${MODPY_DEFAULT_VERSION_3}
. else
# for unflavoured "py2+py3" ports (again normal for py-* modules),
# set the default MODPY_VERSION for the usual py2 version
. if defined(FLAVORS) && ${FLAVORS:Mpython3}
MODPY_VERSION ?= ${MODPY_DEFAULT_VERSION_2}
. else
# ports which don't have a python3 FLAVOR are either old py2-only py-*
# modules, or are other ports which use Python (e.g. those which are
# intended as a standalone program rather than a py-* module).
# in that case, use the usual py3 version; old py2-only modules
# will set MODPY_VERSION themselves.
. endif
. endif
.endif
# verify if MODPY_VERSION found is correct
.if ${MODPY_VERSION} != "2.7" && \
${MODPY_VERSION} != "3.9" && \
${MODPY_VERSION} != "3.10" && \
${MODPY_VERSION} != "3.11"
ERRORS += "Fatal: unknown or unsupported MODPY_VERSION: ${MODPY_VERSION}"
.endif
MODPY_MAJOR_VERSION = ${MODPY_VERSION:R}
.if ${MODPY_MAJOR_VERSION} == 2
MODPY_FLAVOR =
MODPY_BIN_SUFFIX = -2
MODPY_PY_PREFIX = py-
MODPY_PYCACHE =
MODPY_PYC_MAGIC_TAG =
MODPY_COMMENT = "@comment "
MODPY_ABI3SO =
MODPY_PYOEXTENSION = pyo
.elif ${MODPY_MAJOR_VERSION} == 3
# replace py- prefix by py3-
FULLPKGNAME ?= ${PKGNAME:S/^py-/py3-/}${FLAVOR_EXT:S/-python3//}
MODPY_FLAVOR = ,python3
# use MODPY_BIN_SUFFIX for binaries to avoid conflict
MODPY_BIN_SUFFIX =
MODPY_PY_PREFIX = py3-
MODPY_PYCACHE = __pycache__/
MODPY_MAJORMINOR = ${MODPY_VERSION:C/\.//g}
MODPY_PYC_MAGIC_TAG = cpython-${MODPY_MAJORMINOR}.
MODPY_COMMENT =
MODPY_ABI3SO = .abi3
MODPY_PYOEXTENSION ?= opt-1.pyc
.endif
MODPY_SETUPTOOLS ?=
MODPY_SETUPUTILS ?=
MODPY_PYBUILD ?= No
MODPY_PI ?=
# If MODPY_PYTEST_ARGS are set, or if using MODPY_PYBUILD, it implies that
# we want MODPY_PYTEST = Yes
MODPY_PYTEST_ARGS ?=
.if empty(MODPY_PYTEST_ARGS) && ${MODPY_PYBUILD:L} == no
MODPY_PYTEST ?= No
.else
MODPY_PYTEST ?= Yes
.endif
MODPY_WANTLIB = python${MODPY_VERSION}
MODPY_RUN_DEPENDS = lang/python/${MODPY_VERSION}
MODPY_LIB_DEPENDS = lang/python/${MODPY_VERSION}
_MODPY_BUILD_DEPENDS = lang/python/${MODPY_VERSION}
.if ${MODPY_PYTEST:L} == "yes"
. if ${MODPY_VERSION} == ${MODPY_DEFAULT_VERSION_2}
NO_TEST = Yes
. else
MODPY_TEST_DEPENDS = ${RUN_DEPENDS}
MODPY_TEST_DEPENDS += devel/py-test${MODPY_FLAVOR}
. endif
.endif
.if ${NO_BUILD:L} == "no"
MODPY_BUILDDEP ?= Yes
.else
MODPY_BUILDDEP ?= No
.endif
MODPY_RUNDEP ?= Yes
.if ${NO_TEST:L} == "no"
MODPY_TESTDEP ?= Yes
.else
MODPY_TESTDEP ?= No
.endif
.if ${MODPY_BUILDDEP:L} == "yes"
BUILD_DEPENDS += ${_MODPY_BUILD_DEPENDS}
.endif
.if ${MODPY_RUNDEP:L} == "yes"
RUN_DEPENDS += ${MODPY_RUN_DEPENDS}
.endif
.if ${MODPY_TESTDEP:L} == "yes"
TEST_DEPENDS += ${MODPY_TEST_DEPENDS}
.endif
_MODPY_PRE_BUILD_STEPS = :
.if ${MODPY_PYBUILD:L} == "no"
_MODPY_PRE_BUILD_STEPS += ; if [ -e ${WRKSRC}/pyproject.toml ] && \
grep -q ^build-backend ${WRKSRC}/pyproject.toml && \
! grep -q ^build-backend.*setuptools ${WRKSRC}/pyproject.toml; then \
printf "\n***\n\nOpenBSD ports: should this use MODPY_PYBUILD?\n"; \
grep ^build-backend ${WRKSRC}/pyproject.toml || true; \
printf "\n***\n\n"; fi
.endif
.if ${MODPY_SETUPTOOLS:L} == "yes"
. if ${MODPY_PYBUILD:L} != "no"
ERRORS += "Fatal: don't set both MODPY_PYBUILD and MODPY_SETUPTOOLS"
. endif
# For Python 2, setuptools provides a package locator that
# is required at runtime for the pkg_resources stuff to work
# For Python 3, normally importlib.metadata (in Python core
# in newer versions) or importlib_metadata (external module)
# are used in preference.
. if ${MODPY_MAJOR_VERSION} == 2
MODPY_SETUPUTILS_DEPEND ?= devel/py2-setuptools
MODPY_RUN_DEPENDS += ${MODPY_SETUPUTILS_DEPEND}
. else
MODPY_SETUPUTILS_DEPEND ?= devel/py-setuptools${MODPY_FLAVOR}
. endif
BUILD_DEPENDS += ${MODPY_SETUPUTILS_DEPEND}
MODPY_SETUPUTILS = Yes
# The setuptools uses test target
TEST_TARGET ?= test
_MODPY_USERBASE =
_MODPY_PRE_BUILD_STEPS += ;[ -e ${WRKSRC}/${MODPY_SETUP} ] || \
( printf '%s\n%s\n' \
'\# generated by python.port.mk' \
'from setuptools import setup; setup()' \
> ${WRKSRC}/${MODPY_SETUP}; \
echo '*** generating minimal setup.py')
_MODPY_PRE_BUILD_STEPS += ;${MODPY_CMD} egg_info || true
# Setuptools opportunistically picks up plugins. If it picks one up that
# uses finalize_distribution_options (usually setuptools_scm), junking
# that plugin will cause failure at the end of build.
# In the absence of a targetted means of disabling this, use a big hammer:
DPB_PROPERTIES += nojunk
.elif ${MODPY_PYBUILD:L} != no
BUILD_DEPENDS += devel/py-build${MODPY_FLAVOR} \
devel/py-installer${MODPY_FLAVOR}
. if ${MODPY_PYBUILD} == flit_core
BUILD_DEPENDS += devel/py-flit_core${MODPY_FLAVOR}
. elif ${MODPY_PYBUILD} == flit
BUILD_DEPENDS += devel/py-flit${MODPY_FLAVOR}
. elif ${MODPY_PYBUILD} == hatchling
BUILD_DEPENDS += devel/py-hatchling${MODPY_FLAVOR}
. elif ${MODPY_PYBUILD} == poetry-core
BUILD_DEPENDS += devel/py-poetry-core${MODPY_FLAVOR}
. elif ${MODPY_PYBUILD} == setuptools || ${MODPY_PYBUILD} == setuptools_scm
BUILD_DEPENDS += devel/py-setuptools${MODPY_FLAVOR} \
devel/py-wheel${MODPY_FLAVOR}
. if ${MODPY_PYBUILD} == setuptools_scm
BUILD_DEPENDS += devel/py-setuptools_scm${MODPY_FLAVOR}
. endif
. elif !${MODPY_PYBUILD:L:Myes}
ERRORS += "Fatal: unknown MODPY_PYBUILD value"
. endif
.else
# Try to detect the case where a port will build regardless of setuptools
# but the final plist will be different if it's present.
_MODPY_SETUPUTILS_FAKE_DIR = \
${WRKDIR}/lib/python${MODPY_VERSION}/site-packages/setuptools
_MODPY_PRE_BUILD_STEPS += \
;mkdir -p ${_MODPY_SETUPUTILS_FAKE_DIR} \
;exec 3>&1 \
;exec >${_MODPY_SETUPUTILS_FAKE_DIR}/__init__.py \
;echo 'def setup(*args, **kwargs):' \
;echo ' msg = "OpenBSD ports: MODPY_SETUPTOOLS = Yes is required"' \
;echo ' raise Exception(msg)' \
;echo 'Extension = Feature = find_packages = setup' \
;exec 1>&3
MODPY_SETUPUTILS = No
_MODPY_USERBASE = ${WRKDIR}
.endif
.if ${MODPY_PI:L} == "yes"
_MODPY_EGG_NAME = ${DISTNAME:S/-${MODPY_EGG_VERSION}//}
MODPY_PI_DIR ?= ${DISTNAME:C/^([a-zA-Z0-9]).*/\1/}/${_MODPY_EGG_NAME}
MASTER_SITES = ${MASTER_SITE_PYPI:=${MODPY_PI_DIR}/}
HOMEPAGE ?= https://pypi.python.org/pypi/${_MODPY_EGG_NAME}
.endif
MODPY_TKINTER_DEPENDS = lang/python/${MODPY_VERSION},-tkinter
MODPY_BIN = ${LOCALBASE}/bin/python${MODPY_VERSION}
MODPY_INCDIR = ${LOCALBASE}/include/python${MODPY_VERSION}
MODPY_LIBDIR = ${LOCALBASE}/lib/python${MODPY_VERSION}
MODPY_SITEPKG = ${MODPY_LIBDIR}/site-packages
# usually setup.py but Setup.py can be found too
MODPY_SETUP ?= setup.py
# build or build_ext are commonly used
MODPY_DISTUTILS_BUILD ?= build --build-base=${WRKBUILD}
.if ${MODPY_SETUPUTILS:L} == "yes"
MODPY_DISTUTILS_INSTALL ?= install --prefix=${TRUEPREFIX} \
--root=${DESTDIR} \
--single-version-externally-managed
.else
MODPY_DISTUTILS_INSTALL ?= install --prefix=${TRUEPREFIX} \
--root=${DESTDIR}
.endif
MAKE_ENV += CC=${CC} PYTHONUSERBASE=${_MODPY_USERBASE}
CONFIGURE_ENV += PYTHON="${MODPY_BIN}"
.if ${CONFIGURE_STYLE:Mgnu}
CONFIGURE_ENV += ac_cv_prog_PYTHON="${MODPY_BIN}" \
ac_cv_path_PYTHON="${MODPY_BIN}"
.endif
_MODPY_RUNBIN = cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${MODPY_BIN}
MODPY_CMD = cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} \
${MODPY_BIN} ./${MODPY_SETUP} \
${MODPY_SETUP_ARGS}
MODPY_TEST_DIR ?= ${WRKSRC}
MODPY_TEST_CMD = cd ${MODPY_TEST_DIR} && ${SETENV} ${ALL_TEST_ENV} ${MODPY_BIN}
.if ${MODPY_PYTEST:L} == "yes"
MODPY_TEST_CMD += -m pytest
MODPY_TEST_LIBDIR ?= ${WRKSRC}/build/lib:${WRKSRC}/build/lib.openbsd-${OSREV}-${ARCH}-cpython-${MODPY_MAJORMINOR}:${WRKSRC}/lib.openbsd-${OSREV}-${ARCH}-${MODPY_VERSION}
.else
MODPY_TEST_CMD += ./${MODPY_SETUP} ${MODPY_SETUP_ARGS}
.endif
MODPY_TEST_LIBDIR ?=
MODPY_TEST_LOCALE ?= LC_CTYPE=en_US.UTF-8
TEST_ENV += ${MODPY_TEST_LOCALE}
.if !empty(MODPY_TEST_LIBDIR)
TEST_ENV += PYTHONPATH=${MODPY_TEST_LIBDIR}:lib:src
.endif
SUBST_VARS := MODPY_PYCACHE MODPY_COMMENT MODPY_ABI3SO MODPY_PYC_MAGIC_TAG \
MODPY_BIN MODPY_EGG_VERSION MODPY_VERSION MODPY_BIN_SUFFIX \
MODPY_PY_PREFIX MODPY_PYOEXTENSION ${SUBST_VARS}
UPDATE_PLIST_ARGS += -S MODPY_BIN_SUFFIX -S MODPY_PYOEXTENSION \
-I MODPY_ABI3SO -c MODPY_COMMENT -I MODPY_PYCACHE
# set MODPY_BIN for executable scripts
MODPY_BIN_ADJ = perl -pi \
-e '$$. == 1 && s|^.*env +python.*$$|\#!${MODPY_BIN}|;' \
-e '$$. == 1 && s|^.*bin/python.*$$|\#!${MODPY_BIN}|;' \
-e 'close ARGV if eof;' --
MODPY_ADJ_FILES ?=
.if !empty(MODPY_ADJ_FILES)
MODPYTHON_pre-configure += cd ${WRKSRC} && ${MODPY_BIN_ADJ} ${MODPY_ADJ_FILES}
.endif
.if ${MODPY_PYBUILD:L} != no
. if ! ${MODPY_PYBUILD:Msetuptools_scm}
_MODPY_PRE_BUILD_STEPS += ; if [ -e ${WRKSRC}/pyproject.toml ]; then \
grep -q '^requires.*setuptools_scm' ${WRKSRC}/pyproject.toml && \
echo && sleep 1 && \
echo "*** Port appears to require setuptools_scm" && sleep 2; \
fi
. endif
MODPY_BUILD_TARGET = ${_MODPY_PRE_BUILD_STEPS}; \
${_MODPY_RUNBIN} -sBm build -w --no-isolation
MODPY_INSTALL_TARGET = \
${INSTALL_DATA_DIR} ${WRKINST}${MODPY_LIBDIR}; \
${_MODPY_RUNBIN} -m installer -d ${WRKINST} ${WRKSRC}/dist/*.whl
MODPY_TEST_TARGET = ${MODPY_TEST_CMD}
. if ${MODPY_PYTEST:L} == "yes"
MODPY_TEST_TARGET += ${MODPY_PYTEST_ARGS}
. endif
.else
MODPY_BUILD_TARGET = ${_MODPY_PRE_BUILD_STEPS}; \
${MODPY_CMD} ${MODPY_DISTUTILS_BUILD} ${MODPY_DISTUTILS_BUILDARGS}
MODPY_INSTALL_TARGET = \
${MODPY_CMD} ${MODPY_DISTUTILS_BUILD} ${MODPY_DISTUTILS_BUILDARGS} \
${MODPY_DISTUTILS_INSTALL} ${MODPY_DISTUTILS_INSTALLARGS}
MODPY_TEST_TARGET = ${MODPY_TEST_CMD}
. if ${MODPY_PYTEST:L} == "yes"
MODPY_TEST_TARGET += ${MODPY_PYTEST_ARGS}
. elif ${MODPY_SETUPUTILS:L} == "yes"
MODPY_TEST_TARGET += ${TEST_TARGET}
. endif
.endif
# dirty way to do it with no modifications in bsd.port.mk
.if empty(CONFIGURE_STYLE)
. if !target(do-build)
do-build:
@${MODPY_BUILD_TARGET}
. endif
# extra documentation or scripts should be installed via post-install
. if !target(do-install)
do-install:
@${MODPY_INSTALL_TARGET}
. endif
# setuptools supports regress testing from setup.py using a standard target,
# though this is deprecated and in most cases MODPY_PYTEST should be used
# (possibly with MODPY_PYTEST_ARGS pointed at test dirs/files if the automatic
# search picks up files in lib/).
. if !target(do-test) && \
(${MODPY_SETUPUTILS:L} == "yes" || ${MODPY_PYTEST:L} == "yes")
do-test:
@${MODPY_TEST_TARGET}
. endif
. if make(update-plist) || make(plist)
. if defined(FLAVORS) && ${FLAVORS:Mpython3} && !${FLAVOR:Mpython3}
ERRORS += "***\n*** WARNING: running update-plist without FLAVOR=python3\n***\n***"
. endif
. endif
.endif
Reference in New Issue View Git Blame Copy Permalink