cpet/openbsd-ports
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a12893eee7
openbsd-ports/infrastructure/mk/bsd.port.mk
espie effd838b50 hooks for switching to autoconf-2.52.
2001-12-31 09:38:54 +00:00

2789 lines
81 KiB
Makefile
Raw Blame History

#-*- mode: Fundamental; tab-width: 4; -*-
# ex:ts=4 sw=4 filetype=make:
FULL_REVISION=$$OpenBSD: bsd.port.mk,v 1.504 2001/12/31 09:38:54 espie Exp $$
# $FreeBSD: bsd.port.mk,v 1.264 1996/12/25 02:27:44 imp Exp $
# $NetBSD: bsd.port.mk,v 1.62 1998/04/09 12:47:02 hubertf Exp $
#
# bsd.port.mk - 940820 Jordan K. Hubbard.
# This file is in the public domain.
# Each port has a MAINTAINER, which is the email address(es) of the person(s)
# to contact if you have questions/suggestions about that specific port.
# To obtain that address, just type
# make show VARNAME=MAINTAINER
# in the specific port's directory.
#
# The ports@openbsd.org address is the `default' MAINTAINER (the generic
# OpenBSD ports mailing-list).
# Enquiries as to the bsd.port.mk framework should usually be directed
# to ports@openbsd.org.
.if ${.MAKEFLAGS:MFLAVOR=*}
ERRORS+= "Fatal: Use 'env FLAVOR=${FLAVOR} ${MAKE}' instead."
.endif
.if ${.MAKEFLAGS:MSUBPACKAGE=*}
ERRORS+= "Fatal: Use 'env SUBPACKAGE=${SUBPACKAGE} ${MAKE}' instead."
.endif
# There is a transition in progress. When the dust settles,
# the definitive source of documentation to this file's working
# should be bsd.port.mk(5).
#
# All redundant documentation is being stripped, refer to bsd.port.mk(5),
# really !
#
# IMPORTANT: any variable or target starting with an underscore
# (e.g., _DEPEND_ECHO) is internal to bsd.port.mk, and
# liable to change without notice.
#
# DON'T USE IN INDIVIDUAL PORTS !!!
#
# Variables that typically apply to all ports:
#
# MASTER_SITES - Primary location(s) for distribution files if not found
# locally.
# MASTER_SITESn - Primary location(s) for more distribution files, in case
# some distfiles must be fetched from elsewhere.
# MASTER_SITE_SUBDIR - Directory that "%SUBDIR%" in MASTER_SITES is
# replaced by.
#
# Variables that typically apply to an individual port. Non-Boolean
# variables without defaults are *mandatory*.
#
# COMES_WITH - The first version that a port was made part of the
# standard OpenBSD distribution. If the current OpenBSD
# version is >= this version then a notice will be
# displayed instead of the port being generated.
#
# NO_DESCRIBE - Use a dummy (do-nothing) describe target.
# NO_PACKAGE - Use a dummy (do-nothing) package target.
# NO_PKG_REGISTER - Don't register a port install as a package.
# BROKEN - Port is broken. Set this string to the reason why.
# RESTRICTED - Port is restricted. Set this string to the reason why.
#
# PKG_DBDIR - Where package installation is recorded (default: /var/db/pkg)
#
# USE_X11 - Port uses X11.
#
# SCRIPTS_ENV - Additional environment vars passed to scripts in
# ${SCRIPTDIR} executed by bsd.port.mk.
# DEPENDS - A list of other ports this package depends on being
# made first.
#
# FETCH_BEFORE_ARGS -
# Arguments to ${FETCH_CMD} before filename (default: none).
# FETCH_AFTER_ARGS -
# Arguments to ${FETCH_CMD} following filename (default: none).
# NO_IGNORE - Set this to Yes (most probably in a "make fetch" in
# ${PORTSDIR}) if you want to fetch all distfiles,
# even for packages not built due to limitation by
# absent X or ONLY_FOR_ARCHS...
# NO_WARNINGS - Set this to Yes to disable warnings regarding variables
# to define to control the build. Automatically set
# from the "mirror-distfiles" target.
#
# Motif support:
#
# USE_MOTIF - Set this to "any" for ports that work with lesstif or
# openmotif (automatic flavoring), "openmotif" for ports
# that require openmotif, "lesstif" for ports that require
# lesstif. "any" will create an extra hidden lesstif
# FLAVOR, beware in flavor tests.
#
# Variables to change if you want a special behavior:
#
# DEPENDS_TARGET - The target to execute when a port is calling a
# dependency (default: "install").
#
#
# It is assumed that the port installs manpages uncompressed. If this is
# not the case, set MANCOMPRESSED in the port and define MAN<sect> and
# CAT<sect> for the compressed pages. The pages will then be automatically
# uncompressed.
#
# MANCOMPRESSED - Indicates that the port installs manpages in a compressed
# form (default: port installs manpages uncompressed).
# MAN<sect> - A list of manpages, categorized by section. For
# example, if your port has "man/man1/foo.1" and
# "man/mann/bar.n", set "MAN1=foo.1" and "MANN=bar.n".
# The available sections chars are "123456789LN".
# CAT<sect> - The same as MAN<sect>, only for formatted manpages.
# MANPREFIX -The directory prefix for ${MAN<sect>} (default: ${PREFIX}).
# CATPREFIX - The directory prefix for ${CAT<sect>} (default: ${PREFIX}).
#
# Other variables:
#
# Default targets and their behaviors:
#
# fetch - Retrieves ${DISTFILES} (and ${PATCHFILES} if defined, and
# ${SUPDISTFILES} if needed) into ${DISTDIR} as necessary.
# extract - Unpacks ${EXTRACT_ONLY} (${DISTFILES} by default)
# into ${WRKDIR}.
# patch - Apply any provided patches to the source.
# distpatch - Intermediate patch target, apply only distribution patches.
# configure - Runs either GNU configure, one or more local configure
# scripts or nothing, depending on what's available.
# build - Actually compile the sources.
#
# If ${FAKE} == Yes
# fake - Perform a fake installation into ${WRKINST}.
# package - Build package from the fake installation.
# install - Install the resulting package.
#
# Note that `fake' uses {pre,do,post}-install for its own dark purposes.
# There is also a special pre-fake target that gets run after mtree but
# before making the INSTALL_PRECOOKIE, to finish setting up the fake tree.
#
# plist - create a file suitable for use as a packing list. This
# is for port maintainers.
# describe - Try to generate a one-line description for each port for
# use in INDEX files and the like.
# checkpatch - Do a "patch -C" instead of a "patch". Note that it may
# give incorrect results if multiple patches deal with
# the same file.
# checksum - Use ${CHECKSUM_FILE} to ensure that your distfiles are valid.
# makesum - Generate ${CHECKSUM_FILE} (only do this for your own ports!).
# addsum - update ${CHECKSUM_FILE} in a non-destructive way
# (your own ports only!)
# obj - pre-build ${WRKDIR} -> ${WRKOBJDIR}/${PKGPATH} links
#
# readme - Create a README.html file describing the category or package
# (somewhat broken due to NEW_DEPENDS)
# Somewhat obsolete targets:
# list-distfiles- list the distribution and patch files used by a port.
# Typical use is (from the top level of the ports tree)
# make ECHO_MSG=: list-distfiles | tee some-file
# (rely on mirror-maker instead)
# print-depends - print all dependencies for the given package
# (for new dependencies, use
# build-depends-list/run-depends-list instead)
#
#
# Default sequence for "all" is: fetch checksum extract patch configure build
#
# Please read the comments in the targets section below, you
# should be able to use the pre-* or post-* targets (which
# are available for every stage except checksum) or provide
# an overriding do-* target to do pretty much anything you
# want.
#
# For historical reasons, the distpatch target is a subtarget of patch.
# If you provide a do-patch, you MUST call distpatch explicitly.
# The sequence of hooks actually run is:
#
# pre-patch `real distpatch' post-distpatch `real patch' post-patch
#
# For historical reasons, you shouldn't override pre-extract and
# do-extract. Rely on EXTRACT_ONLY and post-extract instead.
.if exists(${.CURDIR}/../Makefile.inc)
.include "${.CURDIR}/../Makefile.inc"
.endif
.if !defined(PERMIT_PACKAGE_CDROM) || !defined(PERMIT_PACKAGE_FTP) || \
!defined(PERMIT_DISTFILES_CDROM) || !defined(PERMIT_DISTFILES_FTP)
ERRORS+="The licensing info for ${FULLPKGNAME} is incomplete."
ERRORS+="Please notify the OpenBSD port maintainer:"
ERRORS+=" ${MAINTAINER}"
_BAD_LICENSING=Yes
PERMIT_PACKAGE_CDROM = No
PERMIT_DISTFILES_CDROM = No
PERMIT_PACKAGE_FTP = No
PERMIT_DISTFILES_FTP = No
.endif
# MODULES support
# reserved name spaces: for module=NAME, modname*, _modname* variables and
# targets.
.if defined(show)
VARNAME=${show}
.MAIN: show
.elif defined(clean)
.MAIN: clean
.else
.MAIN: all
.endif
FAKE?=Yes
TRUST_PACKAGES?=No
BIN_PACKAGES?=No
WRKINST?=${WRKDIR}/fake-${ARCH}${FLAVOR_EXT}
_LIBLIST=${WRKDIR}/.liblist-${ARCH}${FLAVOR_EXT}
_BUILDLIBLIST=${WRKDIR}/.buildliblist-${ARCH}${FLAVOR_EXT}
# Get the architecture
ARCH!= uname -m
# Get the operating system type and version
OPSYS= OpenBSD
OPSYS_VER= ${OSREV}
NO_SHARED_ARCHS=hppa m88k vax
# Define NO_SHARED_LIBS for those machines that don't support shared libraries.
.for _m in ${MACHINE_ARCH}
. if !empty(NO_SHARED_ARCHS:M${_m})
NO_SHARED_LIBS= Yes
. endif
.endfor
# Compatibility kludge for old scripts
.if defined(NOCLEANDEPENDS)
. if ${NOCLEANDEPENDS:L} == "no"
CLEANDEPENDS?=Yes
. else
CLEANDEPENDS?=No
. endif
.else
CLEANDEPENDS?=No
.endif
clean?=work
.if ${CLEANDEPENDS:L} == "yes"
clean+=depends
.endif
.if ${clean:L:Mwork}
clean+=fake
.endif
.if ${clean:L:Mforce}
clean+=-f
.endif
NOMANCOMPRESS?= Yes
DEF_UMASK?= 022
.if exists(${.CURDIR}/Makefile.${ARCH})
.include "${.CURDIR}/Makefile.${ARCH}"
.else
.if exists(${.CURDIR}/Makefile.${MACHINE_ARCH})
.include "${.CURDIR}/Makefile.${MACHINE_ARCH}"
.endif
.endif
NO_DEPENDS?= No
NO_BUILD?= No
NO_REGRESS?= No
# These need to be absolute since we don't know how deep in the ports
# tree we are and thus can't go relative. They can, of course, be overridden
# by individual Makefiles or local system make configuration.
PORTSDIR?= /usr/ports
LOCALBASE?= /usr/local
X11BASE?= /usr/X11R6
DISTDIR?= ${PORTSDIR}/distfiles
.if defined(DIST_SUBDIR)
FULLDISTDIR?= ${DISTDIR}/${DIST_SUBDIR}
.else
FULLDISTDIR?= ${DISTDIR}
.endif
PACKAGES?= ${PORTSDIR}/packages/${MACHINE_ARCH}
TEMPLATES?= ${PORTSDIR}/infrastructure/templates
CDROM_PACKAGES?= ${PORTSDIR}/cdrom-packages/${MACHINE_ARCH}
FTP_PACKAGES?= ${PORTSDIR}/ftp-packages/${MACHINE_ARCH}
.if exists(${.CURDIR}/patches.${ARCH})
PATCHDIR?= ${.CURDIR}/patches.${ARCH}
.else
.if exists(${.CURDIR}/patches.${MACHINE_ARCH})
PATCHDIR?= ${.CURDIR}/patches.${MACHINE_ARCH}
.else
PATCHDIR?= ${.CURDIR}/patches
.endif
.endif
PATCH_LIST?= patch-*
.if exists(${.CURDIR}/scripts.${ARCH})
SCRIPTDIR?= ${.CURDIR}/scripts.${ARCH}
.else
.if exists(${.CURDIR}/scripts.${MACHINE_ARCH})
SCRIPTDIR?= ${.CURDIR}/scripts.${MACHINE_ARCH}
.else
SCRIPTDIR?= ${.CURDIR}/scripts
.endif
.endif
.if exists(${.CURDIR}/files.${ARCH})
FILESDIR?= ${.CURDIR}/files.${ARCH}
.else
.if exists(${.CURDIR}/files.${MACHINE_ARCH})
FILESDIR?= ${.CURDIR}/files.${MACHINE_ARCH}
.else
FILESDIR?= ${.CURDIR}/files
.endif
.endif
.if exists(${.CURDIR}/pkg.${ARCH})
PKGDIR?= ${.CURDIR}/pkg.${ARCH}
.else
.if exists(${.CURDIR}/pkg.${MACHINE_ARCH})
PKGDIR?= ${.CURDIR}/pkg.${MACHINE_ARCH}
.else
PKGDIR?= ${.CURDIR}/pkg
.endif
.endif
PREFIX?= ${LOCALBASE}
TRUEPREFIX?= ${PREFIX}
DESTDIRNAME?= DESTDIR
DESTDIR?= ${WRKINST}
MAKE_FLAGS?=
LIBTOOL_FLAGS?=
.if !defined(FAKE_FLAGS)
FAKE_FLAGS=${DESTDIRNAME}=${WRKINST}
.endif
CONFIGURE_STYLE?=
# where configuration files should go
SYSCONFDIR?= /etc
.if defined(USE_GMAKE)
BUILD_DEPENDS+= ::devel/gmake
MAKE_PROGRAM= ${GMAKE}
.else
MAKE_PROGRAM= ${MAKE}
.endif
AUTOCONF_NEW?= No
.if ${CONFIGURE_STYLE:L:Mautoupdate}
CONFIGURE_STYLE+=autoconf
.endif
.if ${CONFIGURE_STYLE:L:Mautoconf}
CONFIGURE_STYLE+=gnu
. if ${AUTOCONF_NEW:L} == "yes"
BUILD_DEPENDS+= ::devel/autoconf-new
AUTOCONF?= autoconf-new
AUTOUPDATE?= autoupdate-new
AUTOHEADER?= autoheader-new
MAKE_FLAGS+= AUTOCONF='${AUTOCONF}' AUTOHEADER='${AUTOHEADER}'
FAKE_FLAGS+= AUTOCONF='${AUTOCONF}' AUTOHEADER='${AUTOHEADER}'
. else
AUTOCONF?= autoconf
AUTOUPDATE?= autoupdate
AUTOHEADER?= autoheader
BUILD_DEPENDS+= ::devel/autoconf
. endif
AUTOCONF_DIR?=${WRKSRC}
# missing ?= not an oversight
AUTOCONF_ENV=PATH=${PORTPATH}
.endif
.if defined(USE_LIBTOOL)
LIBTOOL?= ${LOCALBASE}/bin/libtool
BUILD_DEPENDS+= ::devel/libtool
CONFIGURE_ENV+= LIBTOOL="${LIBTOOL} ${LIBTOOL_FLAGS}"
MAKE_ENV+= LIBTOOL="${LIBTOOL} ${LIBTOOL_FLAGS}"
MAKE_FLAGS+= LIBTOOL="${LIBTOOL} ${LIBTOOL_FLAGS}"
.endif
.if exists(${PORTSDIR}/../Makefile.inc)
.include "${PORTSDIR}/../Makefile.inc"
.endif
SUBPACKAGE?=
FLAVOR?=
FLAVORS?=
.if !empty(FLAVORS:L:Mregress) && empty(FLAVOR:L:Mregress)
NO_REGRESS= Yes
.endif
USE_MOTIF?=No
HAVE_MOTIF?=No
.if ${USE_MOTIF:L} != "no"
. if ${USE_MOTIF:L} == "lesstif"
LIB_DEPENDS+= Xm.1::x11/lesstif
. elif ${USE_MOTIF:L} == "openmotif"
LIB_DEPENDS+= Xm.2::x11/openmotif
. elif ${USE_MOTIF:L} == "any" || ${USE_MOTIF:L} == "yes"
FLAVORS+=lesstif
. if ${FLAVOR:L:Mlesstif}
LIB_DEPENDS+= Xm.1::x11/lesstif
. else
LIB_DEPENDS+= Xm.2::x11/openmotif
. endif
. else
ERRORS+= "Fatal: Unknown USE_MOTIF=${USE_MOTIF} settings."
. endif
MOTIFLIB=-L${LOCALBASE}/lib -lXm
.endif
.if !empty(SUBPACKAGE)
. for _i in ${SUBPACKAGE}
. if !defined(MULTI_PACKAGES) || empty(MULTI_PACKAGES:M${_i})
ERRORS+= "Fatal: Subpackage ${SUBPACKAGE} does not exist."
. endif
. endfor
.endif
# Support architecture and flavor dependent packing lists
#
SED_PLIST?=
# Build FLAVOR_EXT, checking that no flavors are misspelled
FLAVOR_EXT:=
# Create the basic sed substitution pipeline for fragments
# (applies only to PLIST for now)
.if !empty(FLAVORS)
. for _i in ${FLAVORS:L}
. if empty(FLAVOR:L:M${_i})
SED_PLIST+=|sed -e '/^!%%${_i}%%$$/r${PKGDIR}/PFRAG.no-${_i}' -e '//d' -e '/^%%${_i}%%$$/d'
. else
FLAVOR_EXT:=${FLAVOR_EXT}-${_i}
SED_PLIST+=|sed -e '/^!%%${_i}%%$$/d' -e '/^%%${_i}%%$$/r${PKGDIR}/PFRAG.${_i}' -e '//d'
. endif
. endfor
.endif
.if !empty(FLAVOR)
. if !empty(FLAVORS)
. for _i in ${FLAVOR:L}
. if empty(FLAVORS:L:M${_i})
ERRORS+= "Fatal: Unknown flavor: ${_i}"
ERRORS+= " (Possible flavors are: ${FLAVORS})."
. endif
. endfor
. else
ERRORS+= "Fatal: no flavors for this port."
. endif
.endif
PKGREPOSITORYSUBDIR?= All
PKG_SUFX?= .tgz
PKGREPOSITORY?= ${PACKAGES}/${PKGREPOSITORYSUBDIR}
PKG_DBDIR?= /var/db/pkg
PKGNAME?=${DISTNAME}
FULLPKGNAME?=${PKGNAME}${FLAVOR_EXT}
PKGFILE=${PKGREPOSITORY}/${FULLPKGNAME}${PKG_SUFX}
.if defined(MULTI_PACKAGES)
. for _s in ${MULTI_PACKAGES}
. if !defined(FULLPKGNAME${_s})
. if defined(PKGNAME${_s})
FULLPKGNAME${_s} = ${PKGNAME${_s}}${FLAVOR_EXT}
. else
FULLPKGNAME${_s} = ${PKGNAME}${_s}${FLAVOR_EXT}
. endif
. endif
PKGFILE${_s} = ${PKGREPOSITORY}/${FULLPKGNAME${_s}}${PKG_SUFX}
. endfor
.endif
_WRKDIR_COOKIE= ${WRKDIR}/.extract_started
_EXTRACT_COOKIE= ${WRKDIR}/.extract_done
_PATCH_COOKIE= ${WRKDIR}/.patch_done
_DISTPATCH_COOKIE= ${WRKDIR}/.distpatch_done
_PREPATCH_COOKIE= ${WRKDIR}/.prepatch_done
_INSTALL_COOKIE= ${PKG_DBDIR}/${FULLPKGNAME${SUBPACKAGE}}/+CONTENTS
.if ${FAKE:L} == "yes"
_FAKE_COOKIE= ${WRKINST}/.fake_done
_INSTALL_PRE_COOKIE=${WRKINST}/.install_started
.elif defined(SEPARATE_BUILD)
_INSTALL_PRE_COOKIE=${WRKBUILD}/.install_started
.else
_INSTALL_PRE_COOKIE=${WRKDIR}/.install_started
_FAKE_COOKIE= ${WRKDIR}/.fake_done
.endif
_PACKAGE_COOKIE= ${PKGFILE}
.if defined(SEPARATE_BUILD)
_CONFIGURE_COOKIE= ${WRKBUILD}/.configure_done
_BUILD_COOKIE= ${WRKBUILD}/.build_done
_REGRESS_COOKIE= ${WRKBUILD}/.regress_done
.else
_CONFIGURE_COOKIE= ${WRKDIR}/.configure_done
_BUILD_COOKIE= ${WRKDIR}/.build_done
_REGRESS_COOKIE= ${WRKDIR}/.regress_done
.endif
_ALL_COOKIES=${_EXTRACT_COOKIE} ${_PATCH_COOKIE} ${_CONFIGURE_COOKIE} \
${_INSTALL_PRE_COOKIE} ${_BUILD_COOKIE} ${_REGRESS_COOKIE} \
${_PACKAGE_COOKIES} \
${_DISTPATCH_COOKIE} ${_PREPATCH_COOKIE} ${_FAKE_COOKIE} \
${_WRKDIR_COOKIE} ${_DEPlib_COOKIES} ${_DEPmisc_COOKIES} \
${_DEPfetch_COOKIES} ${_DEPbuild_COOKIES} ${_DEPrun_COOKIES} \
${_DEPregress_COOKIES}
_MAKE_COOKIE=touch -f
# Miscellaneous overridable commands:
GMAKE?= gmake
# Compatibility game
MD5_FILE?= ${FILESDIR}/md5
CHECKSUM_FILE?= ${.CURDIR}/distinfo
# Don't touch !!! Used for generating checksums.
_CIPHERS= sha1 rmd160 md5
# This is the one you can override
PREFERRED_CIPHERS?= ${_CIPHERS}
PORTPATH?= /usr/bin:/bin:/usr/sbin:/sbin:${LOCALBASE}/bin:${X11BASE}/bin
# Add any COPTS to CFLAGS. Note: programs that use imake do not
# use CFLAGS! Also, many (most?) ports hard code CFLAGS, ignoring
# what we pass in.
.if defined(COPTS)
CFLAGS+= ${COPTS}
.endif
.if defined(CXXOPTS)
CXXFLAGS+= ${CXXOPTS}
.endif
.if defined(WARNINGS) && ${WARNINGS:L} == "yes"
. if defined(CDIAGFLAGS)
CFLAGS+= ${CDIAGFLAGS}
. endif
. if defined(CXXDIAGFLAGS)
CXXFLAGS+= ${CXXDIAGFLAGS}
. endif
.endif
MAKE_FILE?= Makefile
MAKE_ENV+= PATH='${PORTPATH}' PREFIX='${PREFIX}' \
LOCALBASE='${LOCALBASE}' X11BASE='${X11BASE}' \
MOTIFLIB='${MOTIFLIB}' CFLAGS='${CFLAGS}' \
TRUEPREFIX='${PREFIX}' ${DESTDIRNAME}=''
FETCH_CMD?= /usr/bin/ftp
DISTORIG?= .bak.orig
PATCH?= /usr/bin/patch
PATCHORIG?= .orig
PATCH_STRIP?= -p0
PATCH_DIST_STRIP?= -p0
PATCH_DEBUG?=No
.if ${PATCH_DEBUG:L} != "no"
PATCH_ARGS?= -d ${WRKDIST} -b ${PATCHORIG} -E ${PATCH_STRIP}
PATCH_DIST_ARGS?= -b ${DISTORIG} -d ${WRKDIST} -E ${PATCH_DIST_STRIP}
.else
PATCH_ARGS?= -d ${WRKDIST} -b ${PATCHORIG} --forward --quiet -E ${PATCH_STRIP}
PATCH_DIST_ARGS?= -b ${DISTORIG} -d ${WRKDIST} --forward --quiet -E ${PATCH_DIST_STRIP}
.endif
PATCH_CHECK_ONLY?=No
.if ${PATCH_CHECK_ONLY:L} == "yes"
PATCH_ARGS+= -C
PATCH_DIST_ARGS+= -C
.endif
TAR?= /bin/tar
UNZIP?= unzip
BZIP2?= bzip2
MAKE_ENV+= EXTRA_SYS_MK_INCLUDES="<bsd.own.mk>"
.if defined(OBJMACHINE)
WRKDIR?= ${.CURDIR}/w-${PKGNAME}${FLAVOR_EXT}.${MACHINE_ARCH}
.else
. if defined(SEPARATE_BUILD) && ${SEPARATE_BUILD:L:Mflavored}
WRKDIR?= ${.CURDIR}/w-${PKGNAME}
. else
WRKDIR?= ${.CURDIR}/w-${PKGNAME}${FLAVOR_EXT}
. endif
.endif
WRKDIST?= ${WRKDIR}/${DISTNAME}
WRKSRC?= ${WRKDIST}
.if defined(SEPARATE_BUILD)
WRKBUILD?= ${WRKDIR}/build-${MACHINE_ARCH}${FLAVOR_EXT}
WRKPKG?= ${WRKBUILD}/pkg
.else
WRKBUILD?= ${WRKSRC}
WRKPKG?= ${WRKDIR}/pkg
.endif
ALL_TARGET?= all
INSTALL_TARGET?= install
FAKE_TARGET ?= ${INSTALL_TARGET}
.for _i in perl gnu imake
. if ${CONFIGURE_STYLE:L:M${_i}}
MODULES+=${_i}
. endif
.endfor
.if defined(MODULES)
_MODULES_DONE=
. include "${PORTSDIR}/infrastructure/mk/modules.port.mk"
.endif
# NEED_VERSION: we need at least this version of bsd.port.mk for this
# port to build
_VERSION_REVISION=${FULL_REVISION:M[0-9]*.*}
_VERSION=${_VERSION_REVISION:C/\..*//}
_REVISION=${_VERSION_REVISION:C/.*\.//}
.for _v in ${NEED_VERSION}
_VERSION_NEEDED=${_v:C/\..*//}
_REVISION_NEEDED=${_v:C/.*\.//}
. if ${_VERSION_NEEDED} > ${_VERSION} || \
(${_VERSION_NEEDED} == ${_VERSION} && ${_REVISION_NEEDED} > ${_REVISION})
ERRORS+= "Fatal: Need version ${NEED_VERSION} of bsd.port.mk."
. endif
.endfor
REGRESS_TARGET ?= regress
REGRESS_FLAGS ?= ${MAKE_FLAGS}
.if ${FAKE:L} == "yes"
_PACKAGE_COOKIE_DEPS=${_FAKE_COOKIE}
.else
_PACKAGE_COOKIE_DEPS=${_INSTALL_COOKIE}
.endif
_PACKAGE_COOKIES= ${_PACKAGE_COOKIE}
.if ${BIN_PACKAGES:L} == "yes"
${_PACKAGE_COOKIE}:
@${MAKE} ${_PACKAGE_COOKIE_DEPS}
.else
${_PACKAGE_COOKIE}: ${_PACKAGE_COOKIE_DEPS}
.endif
@cd ${.CURDIR} && SUBPACKAGE='' FLAVOR='${FLAVOR}' PACKAGING='' exec ${MAKE} _package
.if !defined(PACKAGE_NOINSTALL)
@${_MAKE_COOKIE} $@
.endif
.for _s in ${MULTI_PACKAGES}
_PACKAGE_COOKIE${_s} = ${PKGFILE${_s}}
_PACKAGE_COOKIES += ${_PACKAGE_COOKIE${_s}}
. if ${BIN_PACKAGES:L} == "yes"
${_PACKAGE_COOKIE${_s}}:
@${MAKE} ${_PACKAGE_COOKIE_DEPS}
. else
${_PACKAGE_COOKIE${_s}}: ${_PACKAGE_COOKIE_DEPS}
. endif
@cd ${.CURDIR} && SUBPACKAGE='${_s}' FLAVOR='${FLAVOR}' PACKAGING='${_s}' exec ${MAKE} _package
.endfor
.PRECIOUS: ${_PACKAGE_COOKIES} ${_INSTALL_COOKIE}
.if !defined(PKGPATH)
_PORTSDIR!= cd ${PORTSDIR} && pwd -P
_CURDIR!= cd ${.CURDIR} && pwd -P
PKGPATH=${_CURDIR:S,${_PORTSDIR}/,,}
.endif
PKGDEPTH=${PKGPATH:C|[^./][^/]*|..|g}
.if empty(SUBPACKAGE)
FULLPKGPATH=${PKGPATH}${FLAVOR_EXT:S/-/,/g}
.else
FULLPKGPATH=${PKGPATH},${SUBPACKAGE}${FLAVOR_EXT:S/-/,/g}
.endif
# A few aliases for *-install targets
INSTALL_PROGRAM= \
${INSTALL} ${INSTALL_COPY} ${INSTALL_STRIP} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}
INSTALL_SCRIPT= \
${INSTALL} ${INSTALL_COPY} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}
INSTALL_DATA= \
${INSTALL} ${INSTALL_COPY} -o ${SHAREOWN} -g ${SHAREGRP} -m ${SHAREMODE}
INSTALL_MAN= \
${INSTALL} ${INSTALL_COPY} -o ${MANOWN} -g ${MANGRP} -m ${MANMODE}
INSTALL_PROGRAM_DIR= \
${INSTALL} -d -o ${BINOWN} -g ${BINGRP} -m ${DIRMODE}
INSTALL_SCRIPT_DIR= \
${INSTALL_PROGRAM_DIR}
INSTALL_DATA_DIR= \
${INSTALL} -d -o ${SHAREOWN} -g ${SHAREGRP} -m ${DIRMODE}
INSTALL_MAN_DIR= \
${INSTALL} -d -o ${MANOWN} -g ${MANGRP} -m ${DIRMODE}
_INSTALL_MACROS= BSD_INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
BSD_INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
BSD_INSTALL_DATA="${INSTALL_DATA}" \
BSD_INSTALL_MAN="${INSTALL_MAN}" \
BSD_INSTALL_PROGRAM_DIR="${INSTALL_PROGRAM_DIR}" \
BSD_INSTALL_SCRIPT_DIR="${INSTALL_SCRIPT_DIR}" \
BSD_INSTALL_DATA_DIR="${INSTALL_DATA_DIR}" \
BSD_INSTALL_MAN_DIR="${INSTALL_MAN_DIR}"
MAKE_ENV+= ${_INSTALL_MACROS}
SCRIPTS_ENV+= ${_INSTALL_MACROS}
# The user can override the NO_PACKAGE by specifying this from
# the make command line
.if defined(FORCE_PACKAGE)
.undef NO_PACKAGE
.endif
# Create the generic variable substitution list, from subst vars
SUBST_VARS+=MACHINE_ARCH ARCH HOMEPAGE PREFIX SYSCONFDIR FLAVOR_EXT
_SED_SUBST=sed
.for _v in ${SUBST_VARS}
_SED_SUBST+=-e 's,$${${_v}},${${_v}},g'
.endfor
_SED_SUBST+=-e 's,$${FLAVORS},${FLAVOR_EXT},g' -e 's,$$\\,$$,g'
# and append it to the PLIST substitution pipeline
SED_PLIST+=|${_SED_SUBST}
# find out the most appropriate PLIST source
.if !defined(PLIST) && exists(${PKGDIR}/PLIST${SUBPACKAGE}${FLAVOR_EXT}.${ARCH})
PLIST= ${PKGDIR}/PLIST${SUBPACKAGE}${FLAVOR_EXT}.${ARCH}
.else
.if !defined(PLIST) && exists(${PKGDIR}/PLIST${SUBPACKAGE}${FLAVOR_EXT}.${MACHINE_ARCH})
PLIST= ${PKGDIR}/PLIST${SUBPACKAGE}${FLAVOR_EXT}.${MACHINE_ARCH}
.endif
.endif
.if !defined(PLIST) && defined(NO_SHARED_LIBS) && exists(${PKGDIR}/PLIST${SUBPACKAGE}${FLAVOR_EXT}.noshared)
PLIST= ${PKGDIR}/PLIST${SUBPACKAGE}${FLAVOR_EXT}.noshared
.endif
.if !defined(PLIST) && exists(${PKGDIR}/PLIST${SUBPACKAGE}${FLAVOR_EXT})
PLIST= ${PKGDIR}/PLIST${SUBPACKAGE}${FLAVOR_EXT}
.endif
.if !defined(PLIST) && exists(${PKGDIR}/PLIST${SUBPACKAGE}.${ARCH})
PLIST= ${PKGDIR}/PLIST${SUBPACKAGE}.${ARCH}
.else
.if !defined(PLIST) && exists(${PKGDIR}/PLIST${SUBPACKAGE}.${MACHINE_ARCH})
PLIST= ${PKGDIR}/PLIST${SUBPACKAGE}.${MACHINE_ARCH}
.endif
.endif
.if !defined(PLIST) && defined(NO_SHARED_LIBS) && exists(${PKGDIR}/PLIST${SUBPACKAGE}.noshared)
PLIST= ${PKGDIR}/PLIST${SUBPACKAGE}.noshared
.endif
PLIST?= ${PKGDIR}/PLIST${SUBPACKAGE}
# Likewise for DESCR/MESSAGE/COMMENT
.if defined(COMMENT${SUBPACKAGE}${FLAVOR_EXT})
_COMMENT=${COMMENT${SUBPACKAGE}${FLAVOR_EXT}}
.elif defined(COMMENT${SUBPACKAGE})
_COMMENT=${COMMENT${SUBPACKAGE}}
.endif
${WRKPKG}/COMMENT${SUBPACKAGE}:
.if defined(_COMMENT)
@echo ${_COMMENT} >$@
.else
ERRORS+="Fatal: Missing comment."
.endif
.if exists(${PKGDIR}/MESSAGE${SUBPACKAGE})
MESSAGE?= ${PKGDIR}/MESSAGE${SUBPACKAGE}
.endif
DESCR?= ${PKGDIR}/DESCR${SUBPACKAGE}
# And create the actual files from sources
${WRKPKG}/PLIST${SUBPACKAGE}: ${PLIST}
@echo "@comment subdir=${FULLPKGPATH} cdrom=${PERMIT_PACKAGE_CDROM:L} ftp=${PERMIT_PACKAGE_FTP:L}" >$@.tmp
@self=${FULLPKGNAME${SUBPACKAGE}} exec ${MAKE} _solve-package-depends|sort -u >>$@.tmp
.if defined(NO_SHARED_LIBS)
@sed -e '/^!%%SHARED%%$$/r${PKGDIR}/PFRAG.no-shared${SUBPACKAGE}' \
-e '/^%%!SHARED%%$$/r${PKGDIR}/PFRAG.no-shared${SUBPACKAGE}' \
-e '//d' -e '/^%%SHARED%%$$/d' <$? \
${SED_PLIST} >>$@.tmp && mv -f $@.tmp $@
.else
@if [ -x /sbin/ldconfig ]; then \
sed -e '/^!%%SHARED%%$$/d' \
-e '/^%%!SHARED%%$$/d' \
-e '/^%%SHARED%%$$/r${PKGDIR}/PFRAG.shared${SUBPACKAGE}' \
-e '//d' <$? ${SED_PLIST} \
| sed -f ${LDCONFIG_SED_SCRIPT} >>$@.tmp && mv -f $@.tmp $@; \
else \
sed -e '/^!%%SHARED%%$$/d' \
-e '/^%%!SHARED%%$$/d' \
-e '/^%%SHARED%%$$/r${PKGDIR}/PFRAG.shared${SUBPACKAGE}' \
-e '//d' <$? \
${SED_PLIST} >>$@.tmp && mv -f $@.tmp $@; \
fi
.endif
MTREE_FILE?=
MTREE_FILE+=${PORTSDIR}/infrastructure/db/fake.mtree
${WRKPKG}/DESCR${SUBPACKAGE}: ${DESCR}
@${_SED_SUBST} <$? >$@.tmp && mv -f $@.tmp $@
${WRKPKG}/mtree.spec: ${MTREE_FILE}
@${_SED_SUBST} ${MTREE_FILE}>$@.tmp && mv -f $@.tmp $@
PKG_TMPDIR?= /var/tmp
PKG_CMD?= /usr/sbin/pkg_create
PKG_DELETE?= /usr/sbin/pkg_delete
_SORT_DEPENDS?=tsort|tail -r
# Fill out package command, and package dependencies
_PKG_PREREQ= ${WRKPKG}/PLIST${SUBPACKAGE} ${WRKPKG}/DESCR${SUBPACKAGE} ${WRKPKG}/COMMENT${SUBPACKAGE}
# Note that if you override PKG_ARGS, you will not get correct dependencies
.if !defined(PKG_ARGS)
PKG_ARGS= -v -c '${WRKPKG}/COMMENT${SUBPACKAGE}' -d ${WRKPKG}/DESCR${SUBPACKAGE}
PKG_ARGS+=-f ${WRKPKG}/PLIST${SUBPACKAGE} -p ${PREFIX}
. if exists(${PKGDIR}/INSTALL${SUBPACKAGE})
PKG_ARGS+= -i ${WRKPKG}/INSTALL${SUBPACKAGE}
_PKG_PREREQ+=${WRKPKG}/INSTALL${SUBPACKAGE}
${WRKPKG}/INSTALL${SUBPACKAGE}: ${PKGDIR}/INSTALL${SUBPACKAGE}
@${_SED_SUBST} <$? >$@.tmp && mv -f $@.tmp $@
. endif
. if exists(${PKGDIR}/DEINSTALL${SUBPACKAGE})
PKG_ARGS+= -k ${WRKPKG}/DEINSTALL${SUBPACKAGE}
_PKG_PREREQ+=${WRKPKG}/DEINSTALL${SUBPACKAGE}
${WRKPKG}/DEINSTALL${SUBPACKAGE}: ${PKGDIR}/DEINSTALL${SUBPACKAGE}
@${_SED_SUBST} <$? >$@.tmp && mv -f $@.tmp $@
. endif
. if exists(${PKGDIR}/REQ${SUBPACKAGE})
PKG_ARGS+= -r ${WRKPKG}/REQ${SUBPACKAGE}
_PKG_PREREQ+=${WRKPKG}/REQ${SUBPACKAGE}
${WRKPKG}/REQ${SUBPACKAGE}: ${PKGDIR}/REQ${SUBPACKAGE}
@${_SED_SUBST} <$? >$@.tmp && mv -f $@.tmp $@
. endif
. if defined(MESSAGE)
PKG_ARGS+= -D ${WRKPKG}/MESSAGE${SUBPACKAGE}
_PKG_PREREQ+=${WRKPKG}/MESSAGE${SUBPACKAGE}
${WRKPKG}/MESSAGE${SUBPACKAGE}: ${MESSAGE}
@${_SED_SUBST} <$? >$@.tmp && mv -f $@.tmp $@
. endif
.endif
.if ${FAKE:L} == "yes"
PKG_ARGS+= -s ${WRKINST}${PREFIX}
.endif
CHMOD?= /bin/chmod
CHOWN?= /usr/sbin/chown
GUNZIP_CMD?= /usr/bin/gunzip -f
GZCAT?= /usr/bin/gzcat
GZIP?= -9
GZIP_CMD?= /usr/bin/gzip -nf ${GZIP}
LDCONFIG?= [ ! -x /sbin/ldconfig ] || /sbin/ldconfig
LDCONFIG_SED_SCRIPT?=${PORTSDIR}/infrastructure/install/ldconfig-new.sed
M4?= /usr/bin/m4
STRIP?= /usr/bin/strip
# Autoconf scripts MAY tend to use bison by default otherwise
YACC?=yacc
# XXX ${SETENV} is needed in front of var=value lists whenever the next
# command is expanded from a variable, as this could be a shell construct
SETENV?= /usr/bin/env -i
SH?= /bin/sh
# Used to print all the '===>' style prompts - override this to turn them off.
ECHO_MSG?= echo
# XXX
_DEPEND_ECHO?= echo
# basic master sites configuration
.if exists(${PORTSDIR}/infrastructure/db/network.conf)
.include "${PORTSDIR}/infrastructure/db/network.conf"
.else
.include "${PORTSDIR}/infrastructure/templates/network.conf.template"
.endif
# Where to put distfiles that don't have any other master site
# ;;; This is referenced in a few Makefiles -- we'd like to get rid of it
#
MASTER_SITE_LOCAL?= \
ftp://ftp.netbsd.org/pub/NetBSD/packages/distfiles/LOCAL_PORTS/ \
ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/LOCAL_PORTS/
# Empty declarations to avoid "variable XXX is recursive" errors
MASTER_SITES?=
# Substitute subdirectory names in intermediate form
_MASTER_SITES:= ${MASTER_SITES:S@%SUBDIR%@${MASTER_SITE_SUBDIR}@}
# I guess we're in the master distribution business! :) As we gain mirror
# sites for distfiles, add them to this list.
.if !defined(MASTER_SITE_OVERRIDE)
MASTER_SITES:= ${_MASTER_SITES} ${MASTER_SITE_BACKUP}
.else
MASTER_SITES:= ${MASTER_SITE_OVERRIDE} ${_MASTER_SITES}
.endif
# _SITE_SELECTOR chooses the value of sites based on select.
_SITE_SELECTOR=case $$select in
.for _I in 0 1 2 3 4 5 6 7 8 9
. if defined(MASTER_SITES${_I})
_MASTER_SITES${_I}:= ${MASTER_SITES${_I}:S@%SUBDIR%@${MASTER_SITE_SUBDIR}@}
. if !defined(MASTER_SITE_OVERRIDE)
MASTER_SITES${_I}:= ${_MASTER_SITES${_I}} ${MASTER_SITE_BACKUP}
. else
MASTER_SITES${_I}:= ${MASTER_SITE_OVERRIDE} ${_MASTER_SITES${_I}}
. endif
_SITE_SELECTOR+=*:${_I}) sites="${MASTER_SITES${_I}}";;
. endif
.endfor
_SITE_SELECTOR+=*) sites="${MASTER_SITES}";; esac
# OpenBSD code to handle ports distfiles on a CDROM. The distfiles
# are located in /cdrom/distfiles/${DIST_SUBDIR}/ (assuming that the
# CDROM is mounted on /cdrom).
#
.if exists(/cdrom/distfiles)
CDROM_SITE= /cdrom/distfiles/${DIST_SUBDIR}
.endif
.if defined(CDROM_SITE)
. if defined(FETCH_SYMLINK_DISTFILES)
_CDROM_OVERRIDE=if ln -s ${CDROM_SITE}/$$f .; then exit 0; fi
. else
_CDROM_OVERRIDE=if cp -f ${CDROM_SITE}/$$f .; then exit 0; fi
. endif
.else
_CDROM_OVERRIDE=:
.endif
EXTRACT_SUFX?= .tar.gz
DISTFILES?= ${DISTNAME}${EXTRACT_SUFX}
_EVERYTHING=${DISTFILES}
_DISTFILES= ${DISTFILES:C/:[0-9]$//}
ALLFILES= ${_DISTFILES}
.if defined(PATCHFILES)
_PATCHFILES=${PATCHFILES:C/:[0-9]$//}
_EVERYTHING+=${PATCHFILES}
ALLFILES+= ${_PATCHFILES}
.endif
.if make(makesum) || make(addsum) || make(list-distfiles) || defined(__FETCH_ALL)
. if defined(SUPDISTFILES)
_EVERYTHING+= ${SUPDISTFILES}
ALLFILES+= ${SUPDISTFILES:C/:[0-9]$//}
. endif
.endif
CKSUMFILES=
# First, remove duplicates
.for _file in ${ALLFILES}
. if empty(CKSUMFILES:M${_file})
CKSUMFILES+=${_file}
. endif
.endfor
ALLFILES:=${CKSUMFILES}
.if defined(IGNOREFILES)
. for _file in ${IGNOREFILES}
CKSUMFILES:=${CKSUMFILES:N${_file}}
. endfor
.endif
# List of all files, with ${DIST_SUBDIR} in front. Used for checksum.
.if defined(DIST_SUBDIR)
_CKSUMFILES= ${CKSUMFILES:S/^/${DIST_SUBDIR}\//}
_IGNOREFILES= ${IGNOREFILES:S/^/${DIST_SUBDIR}\//}
.else
_CKSUMFILES= ${CKSUMFILES}
_IGNOREFILES= ${IGNOREFILES}
.endif
# This is what is actually going to be extracted, and is overridable
# by user.
EXTRACT_ONLY?= ${_DISTFILES}
# okay, time for some guess work
.if !empty(EXTRACT_ONLY:M*.zip)
_USE_ZIP?= Yes
.endif
.if !empty(EXTRACT_ONLY:M*.tar.bz2) || (defined(PATCHFILES) && !empty(_PATCHFILES:M*.bz2))
_USE_BZIP2?= Yes
.endif
_USE_ZIP?= No
_USE_BZIP2?= No
EXTRACT_CASES?=
_SED_FIX_SHAR?= sed -n -e '/^\#\![[:blank:]]*\/bin\/sh[[:space:]]*$$/,$$p'
# XXX note that we DON'T set EXTRACT_SUFX.
.if ${_USE_ZIP:L} != "no"
BUILD_DEPENDS+= :unzip-*:archivers/unzip
EXTRACT_CASES+= *.zip) ${UNZIP} -q ${FULLDISTDIR}/$$archive -d ${WRKDIR};;
.endif
.if ${_USE_BZIP2:L} != "no"
BUILD_DEPENDS+= :bzip2-*:archivers/bzip2
EXTRACT_CASES+= *.tar.bz2) ${BZIP2} -dc ${FULLDISTDIR}/$$archive | ${TAR} xf -;;
.endif
EXTRACT_CASES+= *.tar) ${TAR} xf ${FULLDISTDIR}/$$archive;;
EXTRACT_CASES+= *.shar.gz|*.shar.Z|*.sh.gz|*.sh.Z) ${GZIP_CMD} -dc ${FULLDISTDIR}/$$archive | ${_SED_FIX_SHAR} | /bin/sh;;
EXTRACT_CASES+= *.shar | *.sh) ${_SED_FIX_SHAR} ${FULLDISTDIR}/$$archive | /bin/sh;;
EXTRACT_CASES+= *.tar.gz) ${GZIP_CMD} -dc ${FULLDISTDIR}/$$archive | ${TAR} xf -;;
EXTRACT_CASES+= *.gz) ${GZIP_CMD} -dc ${FULLDISTDIR}/$$archive >`basename $$archive .gz`;;
EXTRACT_CASES+= *) ${GZIP_CMD} -dc ${FULLDISTDIR}/$$archive | ${TAR} xf -;;
PATCH_CASES?=
.if ${_USE_BZIP2:L} != "no"
PATCH_CASES+= *.bz2) ${BZIP2} -dc $$patchfile | ${PATCH} ${PATCH_DIST_ARGS};;
.endif
PATCH_CASES+= *.Z|*.gz) ${GZCAT} $$patchfile | ${PATCH} ${PATCH_DIST_ARGS};;
PATCH_CASES+= *) ${PATCH} ${PATCH_DIST_ARGS} < $$patchfile;;
# Documentation
MAINTAINER?= The OpenBSD ports mailing-list <ports@openbsd.org>
.if !defined(CATEGORIES)
ERRORS+= "Fatal: CATEGORIES is mandatory."
.endif
CONFIGURE_SCRIPT?= configure
.if ${CONFIGURE_SCRIPT:M/*}
_CONFIGURE_SCRIPT=${CONFIGURE_SCRIPT}
.else
. if defined(SEPARATE_BUILD)
_CONFIGURE_SCRIPT=${WRKSRC}/${CONFIGURE_SCRIPT}
. else
_CONFIGURE_SCRIPT=./${CONFIGURE_SCRIPT}
. endif
.endif
CONFIGURE_ENV+= PATH=${PORTPATH}
.if defined(NO_SHARED_LIBS)
CONFIGURE_SHARED?= --disable-shared
.else
CONFIGURE_SHARED?= --enable-shared
.endif
# Passed to configure invocations, and user scripts
SCRIPTS_ENV+= CURDIR=${.CURDIR} DISTDIR=${DISTDIR} \
PATH=${PORTPATH} WRKDIR=${WRKDIR} WRKDIST=${WRKDIST} \
WRKSRC=${WRKSRC} WRKBUILD=${WRKBUILD} \
PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} FILESDIR=${FILESDIR} \
PORTSDIR=${PORTSDIR} DEPENDS="${DEPENDS}" \
PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE}
.if defined(BATCH)
SCRIPTS_ENV+= BATCH=yes
.endif
.if ${FAKE:L} == "yes"
MANPREFIX?= ${WRKINST}${TRUEPREFIX}
CATPREFIX?= ${WRKINST}${TRUEPREFIX}
.endif
.for sect in 1 2 3 4 5 6 7 8 9 L N
MAN${sect}PREFIX?= ${MANPREFIX}
CAT${sect}PREFIX?= ${CATPREFIX}
.endfor
MANLANG?= "" # english only by default
.for lang in ${MANLANG}
. for sect in 1 2 3 4 5 6 7 8 9 L N
. if defined(MAN${sect})
_MANPAGES+= ${MAN${sect}:S%^%${MAN${sect}PREFIX}/man/${lang}/man${sect:L}/%}
. endif
. if defined(CAT${sect})
_CATPAGES+= ${CAT${sect}:S%^%${CAT${sect}PREFIX}/man/${lang}/cat${sect:L}/%}
. endif
. endfor
.endfor
################################################################
# Many ways to disable a port.
#
# If we're in BATCH mode and the port is interactive, or we're
# in interactive mode and the port is non-interactive, skip all
# the important targets. The reason we have two modes is that
# one might want to leave a build in BATCH mode running
# overnight, then come back in the morning and do _only_ the
# interactive ones that required your intervention.
#
# Ignore ports that can't be resold if building for a CDROM.
#
# Don't build a port if it's restricted and we don't want to get
# into that.
#
# Don't build a port if it's broken.
#
# Don't build a port if it comes with the base system.
################################################################
.if !defined(NO_IGNORE)
. if (defined(REGRESS_IS_INTERACTIVE) && defined(BATCH))
_IGNORE_REGRESS= "has interactive tests"
. elif (!defined(IS_INTERACTIVE) && defined(INTERACTIVE))
_IGNORE_REGRESS= "does not have interactive tests"
. endif
. if (defined(IS_INTERACTIVE) && defined(BATCH))
IGNORE= "is an interactive port"
. elif (!defined(IS_INTERACTIVE) && defined(INTERACTIVE))
IGNORE= "is not an interactive port"
. elif (defined(RESTRICTED) && defined(NO_RESTRICTED))
IGNORE= "is restricted: ${RESTRICTED}"
. elif defined(USE_X11) && !exists(${X11BASE})
IGNORE= "uses X11, but ${X11BASE} not found"
. elif defined(BROKEN)
IGNORE= "is marked as broken: ${BROKEN}"
. elif defined(ONLY_FOR_ARCHS)
. for __ARCH in ${MACHINE_ARCH} ${ARCH}
. if !empty(ONLY_FOR_ARCHS:M${__ARCH})
_ARCH_OK=1
. endif
. endfor
. if !defined(_ARCH_OK)
. if ${MACHINE_ARCH} == "${ARCH}"
IGNORE= "is only for ${ONLY_FOR_ARCHS}, not ${MACHINE_ARCH}"
. else
IGNORE= "is only for ${ONLY_FOR_ARCHS}, not ${MACHINE_ARCH} \(${ARCH}\)"
. endif
. endif
. elif defined(NOT_FOR_ARCHS)
. for __ARCH in ${MACHINE_ARCH} ${ARCH}
. if !empty(NOT_FOR_ARCHS:M${__ARCH})
IGNORE= "is not for ${NOT_FOR_ARCHS}"
. endif
. endfor
. endif
. if !defined(IGNORE) && defined(COMES_WITH)
. if ( ${OPSYS_VER} >= ${COMES_WITH} )
IGNORE= "-- ${FULLPKGNAME${SUBPACKAGE}:C/-[0-9].*//g} comes with ${OPSYS} as of release ${COMES_WITH}"
. endif
. endif
.endif # NO_IGNORE
.if !defined(DEPENDS_TARGET)
. if make(reinstall)
DEPENDS_TARGET= reinstall
. else
DEPENDS_TARGET= install
. endif
.endif
makesum: fetch-all
.if !defined(NO_CHECKSUM)
@rm -f ${CHECKSUM_FILE} ${MD5_FILE}
@cd ${DISTDIR} && \
for cipher in ${_CIPHERS}; do \
$$cipher ${_CKSUMFILES} >> ${CHECKSUM_FILE}; \
done
@for file in ${_IGNOREFILES}; do \
echo "MD5 ($$file) = IGNORE" >> ${CHECKSUM_FILE}; \
done
@sort -u -o ${CHECKSUM_FILE} ${CHECKSUM_FILE}
.endif
addsum: fetch-all
.if !defined(NO_CHECKSUM)
@if [ -f ${MD5_FILE} ]; then \
mv -f ${MD5_FILE} ${CHECKSUM_FILE}; \
fi
@touch ${CHECKSUM_FILE}
@cd ${DISTDIR} && \
for cipher in ${_CIPHERS}; do \
$$cipher ${_CKSUMFILES} >> ${CHECKSUM_FILE}; \
done
@for file in ${_IGNOREFILES}; do \
echo "MD5 ($$file) = IGNORE" >> ${CHECKSUM_FILE}; \
done
@sort -u -o ${CHECKSUM_FILE} ${CHECKSUM_FILE}
@if [ `sed -e 's/\=.*$$//' ${CHECKSUM_FILE} | uniq -d | wc -l` -ne 0 ]; then \
echo "Inconsistent checksum in ${CHECKSUM_FILE}"; \
exit 1; \
else \
${ECHO_MSG} "${CHECKSUM_FILE} updated okay, don't forget to remove cruft"; \
fi
.endif
################################################################
# Dependency checking
################################################################
# Code to invoke to split dir,-multi,flavor
_flavor_fragment= \
multi=''; flavor=''; sawflavor=false; \
case "$$dir" in \
*,*) \
IFS=,; first=true; for i in $$dir; do \
if $$first; then \
dir=$$i; first=false; \
else \
case X"$$i" in \
X-*) \
multi="$$i";; \
*) \
sawflavor=true; \
flavor="$$flavor $$i";; \
esac \
fi; \
done; unset IFS;; \
esac; \
toset="PKGPATH=$$dir"; \
case X$$multi in "X");; *) \
toset="$$toset SUBPACKAGE=\"$$multi\"";; \
esac; \
if $$sawflavor; then \
toset="$$toset FLAVOR=\"$$flavor\""; \
fi; \
cd ${PORTSDIR}; \
if [ -L $$dir ]; then \
echo 1>&2 ">> Broken dependency: $$dir is a symbolic link"; \
exit 1; \
fi; \
if cd $$dir 2>/dev/null || cd mystuff/$$dir 2>/dev/null; then \
:; \
else \
echo 1>&2 ">> Broken dependency: $$dir non existent"; \
exit 1; \
fi
# Various dependency styles
_fetch_depends_fragment= \
if pkg dependencies check $$pkg; then \
found=true; \
fi
_build_depends_fragment=${_fetch_depends_fragment}
_run_depends_fragment=${_fetch_depends_fragment}
_regress_depends_fragment=${_fetch_depends_fragment}
.if defined(NO_SHARED_LIBS)
_no_shared=-noshared
.else
_noshared=
.endif
_libresolve_fragment = \
case "$$d" in \
*/*) shprefix="$${d%/*}/"; shdir="${LOCALBASE}/$${d%/*}"; \
d=$${d\#\#*/};; \
*) shprefix="" shdir="${LOCALBASE}/lib";; \
esac; \
check=`eval $$listlibs| perl \
${PORTSDIR}/infrastructure/build/resolve-lib ${_noshared} $$d` \
|| true
_lib_depends_fragment = \
what=$$dep; \
IFS=,; bad=false; for d in $$dep; do \
listlibs='ls $$shdir 2>/dev/null'; \
${_libresolve_fragment}; \
case "$$check" in \
Missing\ library) bad=true; msg="$$msg $$d missing...";; \
Error:*) bad=true; msg="$$msg $$d unsolvable...";; \
esac; \
done; $$bad || found=true
_misc_depends_fragment = :
depends: lib-depends misc-depends fetch-depends build-depends run-depends\
regress-depends
# Let DEPENDS behave like the others
.if defined(DEPENDS)
MISC_DEPENDS=${DEPENDS:S/^/nonexistent::/}
.endif
# and the rules for the actual dependencies
_print-packagename:
@echo ${FULLPKGNAME${SUBPACKAGE}}
.for _DEP in fetch build run lib misc regress
_DEP${_DEP}_COOKIES=
. if defined(${_DEP:U}_DEPENDS) && ${NO_DEPENDS:L} == "no"
. for _i in ${${_DEP:U}_DEPENDS}
${WRKDIR}/.${_DEP}${_i:C,[|:./<=>*],-,g}: ${_WRKDIR_COOKIE}
@unset PACKAGING DEPENDS_TARGET FLAVOR SUBPACKAGE || true; \
echo '${_i}'|{ \
IFS=:; read dep pkg dir target; \
case "X$$target" in X) target=${DEPENDS_TARGET};; esac; \
case "X$$target" in Xinstall|Xreinstall) early_exit=false;; \
Xpackage) early_exit=true;; \
*) early_exit=true; dep="/nonexistent";; esac; \
${_flavor_fragment}; defaulted=false; \
case "X$$pkg" in X) pkg=`eval $$toset ${MAKE} _print-packagename`; \
defaulted=true;; esac; \
for abort in false false true; do \
if $$abort; then \
${ECHO_MSG} "Dependency check failed"; \
exit 1; \
fi; \
found=false; \
what=$$pkg; \
case "$$dep" in \
"/nonexistent") ;; \
*) \
${_${_DEP}_depends_fragment}; \
if $$found; then \
${ECHO_MSG} "===> ${FULLPKGNAME${SUBPACKAGE}} depends on: $$what - found"; \
break; \
else \
: $${msg:= not found}; \
${ECHO_MSG} "===> ${FULLPKGNAME${SUBPACKAGE}} depends on: $$what -$$msg"; \
fi;; \
esac; \
${ECHO_MSG} "===> Verifying $$target for $$what in $$dir"; \
if eval $$toset ${MAKE} ${_DEPEND_THRU} $$target; then \
${ECHO_MSG} "===> Returning to build of ${FULLPKGNAME${SUBPACKAGE}}"; \
else \
exit 1; \
fi; \
if $$early_exit; then \
break; \
fi; \
done; \
}
@${_MAKE_COOKIE} $@
_DEP${_DEP}_COOKIES+=${WRKDIR}/.${_DEP}${_i:C,[|:./<=>*],-,g}
. endfor
. endif
${_DEP}-depends: ${_DEP${_DEP}_COOKIES}
.endfor
# Do a brute-force ldd on all files under WRKINST.
.if ${ELF_TOOLCHAIN:L} == "no"
${_LIBLIST}: ${_FAKE_COOKIE}
@${SUDO} mkdir -p ${WRKINST}/usr/libexec
@-${SUDO} cp -f /usr/libexec/ld.so ${WRKINST}/usr/libexec
@-${SUDO} cp -f /usr/lib/libc.so.* ${WRKINST}
@-${SUDO} cp -f /usr/bin/ldd ${WRKINST}
@cd ${WRKINST} && ${SUDO} find . -type f|\
${SUDO} env LD_LIBRARY_PATH=. xargs chroot ${WRKINST} \
./ldd -f '\tlibrary: %o %m %n\n' -f '\tlibrary: %o %m %n\n' 2>/dev/null|\
grep '^ '|\
sort -u >$@
.else
${_LIBLIST}: ${_FAKE_COOKIE}
@cd ${WRKINST} && ${SUDO} find . -type f|\
xargs objdump -p 2>/dev/null |\
grep NEEDED |\
sed 's/\ lib//g' |\
sed 's/ NEEDED / library: /g' |\
sed 's/\.so\./ /g' |\
sed 's/\./\ /g'|\
sort -u >$@
.endif
# list of libraries that can be used: libraries just built, and system libs.
${_BUILDLIBLIST}: ${_FAKE_COOKIE}
@{ \
${SUDO} find ${WRKINST} -type f -o -type l; \
find /usr/lib -path /usr/lib -o -type d -prune -o -type f -print; \
find ${X11BASE}/lib -path ${X11BASE}/lib -o -type d -prune -o -type f -print; \
}|\
fgrep .so.|${SUDO} xargs file -L|fgrep 'shared'|cut -d\: -f1|sort -u >$@
.if defined(IGNORE) && !defined(NO_IGNORE)
fetch checksum extract patch configure all build install regress \
uninstall deinstall fake package lib-depends-check:
. if !defined(IGNORE_SILENT)
@${ECHO_MSG} "===> ${FULLPKGNAME${SUBPACKAGE}} ${IGNORE}."
. endif
.else
# For now, just check all libnames are present
# The check is done on the fake area, be wary of multi-packages situation,
# since we don't take it into account yet.
#
# Note that we cache needed library names, and libraries we're allowed to
# depend upon, but not the actual list of lib depends, since this list is
# going to be tweaked as a result of running lib-depends-check.
#
lib-depends-check: ${_LIBLIST} ${_BUILDLIBLIST}
@LIB_DEPENDS="`${MAKE} _recurse-lib-depends`" PKG_DBDIR='${PKG_DBDIR}' \
perl ${PORTSDIR}/infrastructure/install/check-libs \
${_LIBLIST} ${_BUILDLIBLIST}
# Most standard port targets create a cookie to avoid being re-run.
#
# fetch is an exception, as it uses the files it fetches as `cookies',
# and it's run by checksum, so in essence it's a sub-goal of extract,
# in normal use.
#
# Besides, fetch can't create cookies, as it does not have WRKDIR available
# in the first place.
#
# IMPORTANT: pre-fetch/do-fetch/post-fetch MUST be designed so that they
# can be run several times in a row.
fetch: fetch-depends
# See ports/infrastructure/templates/Makefile.template
@${ECHO_MSG} "===> Checking files for ${FULLPKGNAME}"
. if target(pre-fetch)
@cd ${.CURDIR} && exec ${MAKE} pre-fetch
. endif
. if target(do-fetch)
@cd ${.CURDIR} && exec ${MAKE} do-fetch
. else
# What FETCH normally does:
. if !empty(ALLFILES)
@cd ${.CURDIR} && exec ${MAKE} ${ALLFILES:S@^@${FULLDISTDIR}/@}
. endif
# End of FETCH
. endif
. if target(post-fetch)
@cd ${.CURDIR} && exec ${MAKE} post-fetch
. endif
# Set to true to try to retrieve older distfiles from ftp.openbsd.org if
# checksums no longer match.
REFETCH?=false
checksum: fetch
. if ! defined(NO_CHECKSUM)
@checksum_file=${CHECKSUM_FILE}; \
test -f $$checksum_file || checksum_file=${MD5_FILE}; \
if [ ! -f $$checksum_file ]; then \
${ECHO_MSG} ">> No checksum file."; \
else \
cd ${DISTDIR}; OK=true; list=''; \
for file in ${_CKSUMFILES}; do \
for cipher in ${PREFERRED_CIPHERS}; do \
set -- `grep -i "^$$cipher ($$file)" $$checksum_file` && break || \
${ECHO_MSG} ">> No $$cipher checksum recorded for $$file."; \
done; \
case "$$4" in \
"") \
${ECHO_MSG} ">> No checksum recorded for $$file."; \
OK=false;; \
"IGNORE") \
echo ">> Checksum for $$file is set to IGNORE in md5 file even though"; \
echo " the file is not in the "'$$'"{IGNOREFILES} list."; \
OK=false;; \
*) \
CKSUM=`$$cipher < $$file`; \
case "$$CKSUM" in \
"$$4") \
${ECHO_MSG} ">> Checksum OK for $$file. ($$cipher)";; \
*) \
echo ">> Checksum mismatch for $$file. ($$cipher)"; \
list="$$list $$file $$cipher $$4"; \
OK=false;; \
esac;; \
esac; \
done; \
set --; \
for file in ${_IGNOREFILES}; do \
set -- `grep "($$file)" $$checksum_file` || \
{ echo ">> No checksum recorded for $$file, file is in "'$$'"{IGNOREFILES} list." && \
OK=false; } ; \
case "$$4" in \
"IGNORE") : ;; \
*) \
echo ">> Checksum for $$file is not set to IGNORE in md5 file even though"; \
echo " the file is in the "'$$'"{IGNOREFILES} list."; \
OK=false;; \
esac; \
done; \
if ! $$OK; then \
if ${REFETCH}; then \
cd ${.CURDIR} && ${MAKE} refetch PROBLEMS="$$list"; \
else \
echo "Make sure the Makefile and checksum file ($$checksum_file)"; \
echo "are up to date. If you want to override this check, type"; \
echo "\"make NO_CHECKSUM=Yes [other args]\"."; \
exit 1; \
fi; \
fi ; \
fi
. endif
refetch:
. for file cipher value in ${PROBLEMS}
@rm ${FULLDISTDIR}/${file}
@cd ${.CURDIR} && ${MAKE} ${FULLDISTDIR}/${file} \
MASTER_SITE_OVERRIDE="ftp://ftp.openbsd.org/pub/OpenBSD/distfiles/${cipher}/${value}/"
. endfor
cd ${.CURDIR} && exec ${MAKE} checksum REFETCH=false
# Normal user-mode targets are PHONY targets, e.g., don't create the
# corresponding file. However, there is nothing phony about the cookie.
# The cookie's recipe hold the real rule for each of those targets.
extract: ${_EXTRACT_COOKIE}
patch: ${_DEPbuild_COOKIES} ${_DEPlib_COOKIES} ${_DEPmisc_COOKIES} \
${_PATCH_COOKIE}
distpatch: ${_DEPbuild_COOKIES} ${_DEPlib_COOKIES} ${_DEPmisc_COOKIES} \
${_DISTPATCH_COOKIE}
configure: ${_DEPbuild_COOKIES} ${_DEPlib_COOKIES} ${_DEPmisc_COOKIES} \
${_CONFIGURE_COOKIE}
all build: ${_DEPbuild_COOKIES} ${_DEPlib_COOKIES} ${_DEPmisc_COOKIES} \
${_BUILD_COOKIE}
. if defined(ALWAYS_PACKAGE)
install: ${_INSTALL_COOKIE} ${_PACKAGE_COOKIES}
. else
install: ${_INSTALL_COOKIE}
. endif
fake: ${_FAKE_COOKIE}
package: ${_PACKAGE_COOKIES}
. if defined(_IGNORE_REGRESS)
regress:
. if !defined(IGNORE_SILENT)
@${ECHO_MSG} "===> ${FULLPKGNAME${SUBPACKAGE}} ${_IGNORE_REGRESS}."
. endif
. else
regress: ${_DEPregress_COOKIES} ${_REGRESS_COOKIE}
. endif
.endif # IGNORECMD
_create_wrkobjdir = \
rm -rf ${WRKOBJDIR}/${PKGNAME}${FLAVOR_EXT}; \
mkdir -p ${WRKOBJDIR}/${PKGNAME}${FLAVOR_EXT}; \
if [ ! -L ${WRKDIR} ] || \
[ X`readlink ${WRKDIR}` != X${WRKOBJDIR}/${PKGNAME}${FLAVOR_EXT} ]; then \
${ECHO_MSG} "${WRKDIR} -> ${WRKOBJDIR}/${PKGNAME}${FLAVOR_EXT}"; \
rm -f ${WRKDIR}; \
ln -sf ${WRKOBJDIR}/${PKGNAME}${FLAVOR_EXT} ${WRKDIR}; \
fi
# The real targets. Note that some parts always get run, some parts can be
# disabled, and there are hooks to override behavior.
${_WRKDIR_COOKIE}:
. if defined(WRKOBJDIR)
@${_create_wrkobjdir}
. else
@rm -rf ${WRKDIR}
@mkdir -p ${WRKDIR}
. endif
@${_MAKE_COOKIE} $@
${_EXTRACT_COOKIE}: ${_WRKDIR_COOKIE}
@cd ${.CURDIR} && exec ${MAKE} checksum build-depends lib-depends misc-depends
@${ECHO_MSG} "===> Extracting for ${FULLPKGNAME}"
.if target(pre-extract)
@cd ${.CURDIR} && exec ${MAKE} pre-extract
.endif
.if target(do-extract)
@cd ${.CURDIR} && exec ${MAKE} do-extract
.else
# What EXTRACT normally does:
@PATH=${PORTPATH}; set -e; cd ${WRKDIR}; \
for archive in ${EXTRACT_ONLY}; do \
case $$archive in \
${EXTRACT_CASES} \
esac; \
done
# End of EXTRACT
.endif
.if target(post-extract)
@cd ${.CURDIR} && exec ${MAKE} post-extract
.endif
@${_MAKE_COOKIE} $@
# Both distpatch and patch invoke pre-patch, if it's defined.
# Hence it needs special treatment (a specific cookie).
.if target(pre-patch)
${_PREPATCH_COOKIE}:
@cd ${.CURDIR} && exec ${MAKE} pre-patch
. if ${PATCH_CHECK_ONLY:L} != "yes"
@${_MAKE_COOKIE} $@
. endif
.endif
# The real distpatch
${_DISTPATCH_COOKIE}: ${_EXTRACT_COOKIE}
.if target(pre-patch)
@cd ${.CURDIR} && exec ${MAKE} ${_PREPATCH_COOKIE}
.endif
.if target(do-distpatch)
@cd ${.CURDIR} && exec ${MAKE} do-distpatch
.else
# What DISTPATCH normally does
. if defined(_PATCHFILES)
@${ECHO_MSG} "===> Applying distribution patches for ${FULLPKGNAME}"
@cd ${FULLDISTDIR}; \
for patchfile in ${_PATCHFILES}; do \
case "${PATCH_DEBUG:L}" in \
no) ;; \
*) ${ECHO_MSG} "===> Applying distribution patch $$patchfile" ;; \
esac; \
case $$patchfile in \
${PATCH_CASES} \
esac; \
done
. endif
# End of DISTPATCH.
.endif
.if target(post-distpatch)
@cd ${.CURDIR} && exec ${MAKE} post-distpatch
.endif
.if ${PATCH_CHECK_ONLY:L} != "yes"
@${_MAKE_COOKIE} $@
.endif
# The real patch
${_PATCH_COOKIE}: ${_EXTRACT_COOKIE}
@${ECHO_MSG} "===> Patching for ${FULLPKGNAME}"
.if target(pre-patch)
@cd ${.CURDIR} && exec ${MAKE} ${_PREPATCH_COOKIE}
.endif
.if target(do-patch)
@cd ${.CURDIR} && exec ${MAKE} do-patch
.else
# What PATCH normally does:
# XXX test for efficiency, don't bother with distpatch if it's not needed
. if target(do-distpatch) || target(post-distpatch) || defined(PATCHFILES)
@cd ${.CURDIR} && exec ${MAKE} distpatch
. endif
@if cd ${PATCHDIR} 2>/dev/null || [ x"${PATCH_LIST:M/*}" != x"" ]; then \
error=false; \
for i in ${PATCH_LIST}; do \
case $$i in \
*.orig|*.rej|*~) \
${ECHO_MSG} "===> Ignoring patchfile $$i" ; \
;; \
*) \
if [ -e $$i ]; then \
case "${PATCH_DEBUG:L}" in \
no) ;; \
*) ${ECHO_MSG} "===> Applying ${OPSYS} patch $$i" ;; \
esac; \
${PATCH} ${PATCH_ARGS} < $$i || \
{ echo "***> $$i did not apply cleanly"; \
error=true; }\
else \
if [ $$i != "patch-*" ]; then \
echo "===> Can't find patch matching $$i"; \
error=true; \
fi; \
fi; \
;; \
esac; \
done;\
if $$error; then exit 1; fi; \
fi
# End of PATCH.
.endif
.if target(post-patch)
@cd ${.CURDIR} && exec ${MAKE} post-patch
.endif
.if ${PATCH_CHECK_ONLY:L} != "yes"
. if ${CONFIGURE_STYLE:L:Mautoupdate}
@cd ${AUTOCONF_DIR} && exec ${SETENV} ${AUTOCONF_ENV} ${AUTOUPDATE}
. endif
. if ${CONFIGURE_STYLE:L:Mautoconf}
@cd ${AUTOCONF_DIR} && exec ${SETENV} ${AUTOCONF_ENV} ${AUTOCONF}
. endif
@${_MAKE_COOKIE} $@
.endif
MODSIMPLE_configure= \
cd ${WRKBUILD} && CC="${CC}" ac_cv_path_CC="${CC}" CFLAGS="${CFLAGS}" \
CXX="${CXX}" ac_cv_path_CXX="${CXX}" CXXFLAGS="${CXXFLAGS}" \
INSTALL="/usr/bin/install -c -o ${BINOWN} -g ${BINGRP}" \
ac_given_INSTALL="/usr/bin/install -c -o ${BINOWN} -g ${BINGRP}" \
INSTALL_PROGRAM="${INSTALL_PROGRAM}" INSTALL_MAN="${INSTALL_MAN}" \
INSTALL_SCRIPT="${INSTALL_SCRIPT}" INSTALL_DATA="${INSTALL_DATA}" \
YACC="${YACC}" \
${CONFIGURE_ENV} ${_CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}
# The real configure
${_CONFIGURE_COOKIE}: ${_PATCH_COOKIE}
@${ECHO_MSG} "===> Configuring for ${FULLPKGNAME}"
@mkdir -p ${WRKBUILD} ${WRKPKG}
.if target(pre-configure)
@cd ${.CURDIR} && exec ${MAKE} pre-configure
.endif
.if target(do-configure)
@cd ${.CURDIR} && exec ${MAKE} do-configure
.else
# What CONFIGURE normally does
@if [ -f ${SCRIPTDIR}/configure ]; then \
cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
${SCRIPTDIR}/configure; \
fi
. for _c in ${CONFIGURE_STYLE:L}
. if defined(MOD${_c:U}_configure)
@${MOD${_c:U}_configure}
. endif
. endfor
# End of CONFIGURE.
.endif
.if target(post-configure)
@cd ${.CURDIR} && exec ${MAKE} post-configure
.endif
@${_MAKE_COOKIE} $@
VMEM_WARNING?= No
# The real build
${_BUILD_COOKIE}: ${_CONFIGURE_COOKIE}
.if ${NO_BUILD:L} == "no"
@${ECHO_MSG} "===> Building for ${FULLPKGNAME}"
.if ${VMEM_WARNING:L} == "yes"
@echo ""; \
echo "*** WARNING: you may see an error such as"; \
echo "*** virtual memory exhausted"; \
echo "*** when building this package. If you do you must increase"; \
echo "*** your limits. See the man page for your shell and look"; \
echo "*** for the 'limit' or 'ulimit' command. You may also want to"; \
echo "*** see the login.conf(5) manual page."; \
echo "*** Some examples are: "; \
echo "*** csh(1): limit datasize <kbytes of memory>"; \
echo "*** ksh(1), zsh(1) and bash(1): ulimit -d <kbytes of memory>"; \
echo "";
.endif
. if target(pre-build)
@cd ${.CURDIR} && exec ${MAKE} pre-build
. endif
. if target(do-build)
@cd ${.CURDIR} && exec ${MAKE} do-build
. else
# What BUILD normally does:
@cd ${WRKBUILD} && exec ${SETENV} ${MAKE_ENV} ${MAKE_PROGRAM} ${MAKE_FLAGS} -f ${MAKE_FILE} ${ALL_TARGET}
# End of BUILD
. endif
. if target(post-build)
@cd ${.CURDIR} && exec ${MAKE} post-build
. endif
.endif
@${_MAKE_COOKIE} $@
${_REGRESS_COOKIE}: ${_BUILD_COOKIE}
.if ${NO_REGRESS:L} == "no"
@${ECHO_MSG} "===> Regression check for ${FULLPKGNAME}"
. if target(pre-regress)
@cd ${.CURDIR} && exec ${MAKE} pre-regress
. endif
. if target(do-regress)
@cd ${.CURDIR} && exec ${MAKE} do-regress
. else
# What REGRESS normally does:
@cd ${WRKBUILD} && exec ${SETENV} ${MAKE_ENV} ${MAKE_PROGRAM} ${REGRESS_FLAGS} -f ${MAKE_FILE} ${REGRESS_TARGET}
# End of REGRESS
. endif
. if target(post-regress)
@cd ${.CURDIR} && exec ${MAKE} post-regress
. endif
.else
@echo 1>&2 "No regression check for ${FULLPKGNAME}"
.endif
@${_MAKE_COOKIE} $@
_FAKE_SETUP=TRUEPREFIX=${PREFIX} PREFIX=${WRKINST}${PREFIX} ${DESTDIRNAME}=${WRKINST}
.if ${FAKE:L} == "yes"
${_FAKE_COOKIE}: ${_BUILD_COOKIE} ${WRKPKG}/mtree.spec
@${ECHO_MSG} "===> Faking installation for ${FULLPKGNAME}"
@if [ x`${SUDO} ${SH} -c umask` != x${DEF_UMASK} ]; then \
echo >&2 "Error: your umask is \"`${SH} -c umask`"\".; \
exit 1; \
fi
@${SUDO} install -d -m 755 -o root -g wheel ${WRKINST}
@${SUDO} /usr/sbin/mtree -U -e -d -n -p ${WRKINST} \
-f ${WRKPKG}/mtree.spec >/dev/null
.for _m in ${MODULES}
. if defined(MOD${_m:U}_pre-fake)
@${MOD${_m:U}_pre-fake}
. endif
.endfor
. if target(pre-fake)
@cd ${.CURDIR} && exec ${SUDO} ${MAKE} pre-fake ${_FAKE_SETUP}
. endif
@${SUDO} ${_MAKE_COOKIE} ${_INSTALL_PRE_COOKIE}
. if target(pre-install)
@cd ${.CURDIR} && exec ${SUDO} ${MAKE} pre-install ${_FAKE_SETUP}
. endif
. if target(do-install)
@cd ${.CURDIR} && exec ${SUDO} ${MAKE} do-install ${_FAKE_SETUP}
. else
# What FAKE normally does:
@cd ${WRKBUILD} && exec ${SUDO} ${SETENV} ${MAKE_ENV} ${_FAKE_SETUP} ${MAKE_PROGRAM} ${FAKE_FLAGS} -f ${MAKE_FILE} ${FAKE_TARGET}
# End of FAKE.
. endif
. if target(post-install)
@cd ${.CURDIR} && exec ${SUDO} ${MAKE} post-install ${_FAKE_SETUP}
. endif
. if defined(_MANPAGES) || defined(_CATPAGES)
. if defined(MANCOMPRESSED) && defined(NOMANCOMPRESS)
@${ECHO_MSG} "===> Uncompressing manual pages for ${FULLPKGNAME}"
. for manpage in ${_MANPAGES} ${_CATPAGES}
@${SUDO} ${GUNZIP_CMD} ${manpage}.gz
. endfor
. elif !defined(MANCOMPRESSED) && !defined(NOMANCOMPRESS)
@${ECHO_MSG} "===> Compressing manual pages for ${FULLPKGNAME}"
. for manpage in ${_MANPAGES} ${_CATPAGES}
@if [ -L ${manpage} ]; then \
set - `file ${manpage}`; \
shift `expr $$# - 1`; \
${SUDO} ln -sf $${1}.gz ${manpage}.gz; \
${SUDO} rm ${manpage}; \
else \
${SUDO} ${GZIP_CMD} ${manpage}; \
fi
. endfor
. endif
. endif
@if find ${WRKINST} -type l -ls|fgrep -- '-> ${WRKINST}'; then \
echo >&2 "*** bad links in ${WRKINST}"; \
exit 1; \
fi
@${SUDO} ${_MAKE_COOKIE} $@
# The real install
${_INSTALL_COOKIE}: ${_PACKAGE_COOKIES}
@cd ${.CURDIR} && DEPENDS_TARGET=package exec ${MAKE} run-depends lib-depends
@${ECHO_MSG} "===> Installing ${FULLPKGNAME${SUBPACKAGE}} from ${PKGFILE${SUBPACKAGE}}"
. for _m in ${MODULES}
. if defined(MOD${_m:U}_pre_install)
@${MOD${_m:U}_pre_install}
. endif
. endfor
. if ${TRUST_PACKAGES:L} == "yes"
@if pkg dependencies check ${FULLPKGNAME${SUBPACKAGE}}; then \
echo "Package ${FULLPKGNAME${SUBPACKAGE}} is already installed"; \
else \
${SUDO} ${SETENV} PKG_PATH=${PKGREPOSITORY}:${PKG_PATH} PKG_TMPDIR=${PKG_TMPDIR} pkg_add ${PKGFILE${SUBPACKAGE}}; \
fi
. else
@${SUDO} ${SETENV} PKG_PATH=${PKGREPOSITORY}:${PKG_PATH} PKG_TMPDIR=${PKG_TMPDIR} pkg_add ${PKGFILE${SUBPACKAGE}}
. endif
@-${SUDO} ${_MAKE_COOKIE} $@
.endif
# The real package
_package: ${_PKG_PREREQ}
.if !defined(NO_PACKAGE)
. if target(pre-package)
@cd ${.CURDIR} && exec ${MAKE} pre-package
. endif
. if target(do-package)
@cd ${.CURDIR} && exec ${MAKE} do-package
. else
# What PACKAGE normally does:
@${ECHO_MSG} "===> Building package for ${FULLPKGNAME${SUBPACKAGE}}"
@if [ ! -d ${PKGREPOSITORY} ]; then \
if ! mkdir -p ${PKGREPOSITORY}; then \
echo ">> Can't create directory ${PKGREPOSITORY}."; \
exit 1; \
fi; \
fi
# PLIST should normally hold no duplicates.
# This is left as a warning, because stuff such as @exec %F/%D
# completion may cause legitimate dups.
@duplicates=`sort <${WRKPKG}/PLIST${SUBPACKAGE}|egrep -v '@(comment|mode|owner)'|uniq -d`; \
case "$${duplicates}" in "");; \
*) echo "\n*** WARNING *** Duplicates in PLIST:\n$$duplicates\n";; \
esac
@cd ${.CURDIR} && \
if ${SUDO} ${PKG_CMD} ${PKG_ARGS} ${PKGFILE${SUBPACKAGE}}; then \
mode=`id -u`:`id -g`; ${SUDO} ${CHOWN} $${mode} ${PKGFILE${SUBPACKAGE}}; \
${MAKE} package-links; \
else \
${SUDO} ${MAKE} delete-package; \
exit 1; \
fi
# End of PACKAGE.
. endif
. if target(post-package)
@cd ${.CURDIR} && exec ${MAKE} post-package
. endif
.else
. if !defined(IGNORE_SILENT)
@${ECHO_MSG} "===> ${FULLPKGNAME${SUBPACKAGE}} may not be packaged: ${NO_PACKAGE}."
. endif
.endif
.if !target(fetch-all)
fetch-all:
@cd ${.CURDIR} && exec ${MAKE} __FETCH_ALL=Yes __ARCH_OK=Yes NO_IGNORE=Yes NO_WARNINGS=Yes fetch
.endif
# Separate target for each file fetch will retrieve
.for _F in ${ALLFILES:S@^@${FULLDISTDIR}/@}
${_F}:
@mkdir -p ${_F:H}; \
cd ${_F:H}; \
select=${_EVERYTHING:M*${_F:S@^${FULLDISTDIR}/@@}\:[0-9]}; \
f=${_F:S@^${FULLDISTDIR}/@@}; \
${ECHO_MSG} ">> $$f doesn't seem to exist on this system."; \
${_CDROM_OVERRIDE}; \
${_SITE_SELECTOR}; \
for site in $$sites; do \
${ECHO_MSG} ">> Attempting to fetch ${_F} from $${site}."; \
if ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$$f ${FETCH_AFTER_ARGS}; then \
exit 0; \
fi; \
done; exit 1
.endfor
bulk-packages:
@${MAKE} package BATCH=Yes && exec ${SUDO} ${MAKE} clean CLEANDEPENDS=Yes
@exec ${MAKE} ftp-packages cdrom-packages BATCH=Yes
# bulk-packages is just
# make bulk-do BULK_TARGETS='package ftp-packages cdrom-packages clean'
# BULK_FLAGS='BATCH=Yes CLEANDEPENDS=Yes'
#
# You can, for instance, do:
# make clean='distclean install package'
# make bulk-do
# BULK_TARGETS='distclean clean=package regress lib-depends-check
# package ftp-packages cdrom-packages clean'
# BULK_FLAGS='BATCH=Yes CLEANDEPENDS=Yes'
#
bulk-do:
.for _i in ${BULK_TARGETS}
@exec ${MAKE} ${_i} ${BULK_FLAGS}
.endfor
# Invoke "make cdrom-packages CDROM_PACKAGES=/cdrom/snapshots/packages"
# Invoke "make ftp-packages FTP_PACKAGES=/pub/OpenBSD/snapshots/packages"
.for _l in FTP CDROM
. if ${PERMIT_PACKAGE_${_l}:L} == "yes" && !defined(IGNORE)
${_l:L}-packages: ${${_l}_PACKAGES}/${FULLPKGNAME${SUBPACKAGE}}${PKG_SUFX}
. else
${_l:L}-packages:
. endif
. if defined(MULTI_PACKAGES) && empty(SUBPACKAGE)
. for _sub in ${MULTI_PACKAGES}
@cd ${.CURDIR} && SUBPACKAGE='${_sub}' FLAVOR='${FLAVOR}' exec ${MAKE} ${.TARGET}
. endfor
. endif
${${_l}_PACKAGES}/${FULLPKGNAME${SUBPACKAGE}}${PKG_SUFX}: ${_PACKAGE_COOKIE${SUBPACKAGE}}
. if ${PERMIT_PACKAGE_${_l}:L} == "yes"
@mkdir -p ${${_l}_PACKAGES}
@rm -f ${${_l}_PACKAGES}/${FULLPKGNAME${SUBPACKAGE}}${PKG_SUFX}
@ln ${PKGFILE${SUBPACKAGE}} \
${${_l}_PACKAGES}/${FULLPKGNAME${SUBPACKAGE}}${PKG_SUFX} 2>/dev/null || \
cp -p ${PKGFILE${SUBPACKAGE}} \
${${_l}_PACKAGES}/${FULLPKGNAME${SUBPACKAGE}}${PKG_SUFX}
. else
@echo 1>&2 "Internal error: ${_l:L}-packages for a forbidden file ?"
@false
. endif
.endfor
# list the distribution and patch files used by a port. Typical
# use is make ECHO_MSG=: list-distfiles | tee some-file
#
list-distfiles:
@echo "${FULLPKGNAME}"
@for file in ${ALLFILES}; do \
if [ "$$file" != "${EXTRACT_SUFX}" ]; then \
if [ -z "${DIST_SUBDIR}" ]; then \
printf "\t$$file\n"; \
else \
printf "\t${DIST_SUBDIR}/$$file\n"; \
fi \
fi \
done
@echo ""
# Obj
#
.if !target(obj)
obj:
. if defined(WRKOBJDIR)
@${_create_wrkobjdir}
. else
@echo ">>"
@echo ">> Please set the WRKOBJDIR variable before using 'make obj'"
@echo ">>"
@exit 1;
. endif
.endif
# Some support rules for do-package
.if !target(package-links)
package-links:
@cd ${.CURDIR} && exec ${MAKE} delete-package-links
@for cat in ${CATEGORIES}; do \
if [ ! -d ${PACKAGES}/$$cat ]; then \
if ! mkdir -p ${PACKAGES}/$$cat; then \
echo ">> Can't create directory ${PACKAGES}/$$cat."; \
exit 1; \
fi; \
fi; \
case $$cat in */*/*) parent=../../..;; */*) parent=../..;; *) parent=..;; esac; \
ln -s $$parent/${PKGREPOSITORYSUBDIR}/${FULLPKGNAME${SUBPACKAGE}}${PKG_SUFX} ${PACKAGES}/$$cat; \
done;
.endif
.if !target(delete-package-links)
delete-package-links:
@cd ${PACKAGES} && find . -type l -name ${FULLPKGNAME${SUBPACKAGE}}${PKG_SUFX}|xargs rm -f
.endif
.if !target(delete-package)
delete-package:
@cd ${.CURDIR} && exec ${MAKE} delete-package-links
@rm -f ${PKGFILE${SUBPACKAGE}}
.endif
# Checkpatch
#
# Special target to verify patches
.if !target(checkpatch)
checkpatch:
@cd ${.CURDIR} && exec ${MAKE} PATCH_CHECK_ONLY=Yes patch
.endif
# Reinstall
#
# Special target to re-run install
reinstall:
@${SUDO} ${PKG_DELETE} -f ${FULLPKGNAME${SUBPACKAGE}}
@cd ${.CURDIR} && DEPENDS_TARGET=${DEPENDS_TARGET} exec ${MAKE} install
# Rebuild
#
# Special target to re-run build
rebuild:
@rm -f ${_BUILD_COOKIE}
@cd ${.CURDIR} && exec ${MAKE} build
# Deinstall
#
# Special target to remove installation
uninstall deinstall:
@${ECHO_MSG} "===> Deinstalling for ${FULLPKGNAME${SUBPACKAGE}}"
@${SUDO} ${PKG_DELETE} -f ${FULLPKGNAME${SUBPACKAGE}}
################################################################
# Some more targets supplied for users' convenience
################################################################
# Cleaning up
.if !target(pre-clean)
pre-clean:
.endif
.if !target(clean)
clean: pre-clean
. if ${clean:L:Mdepends}
@cd ${.CURDIR} && exec ${MAKE} clean-depends
. endif
@${ECHO_MSG} "===> Cleaning for ${FULLPKGNAME${SUBPACKAGE}}"
. if ${clean:L:Mfake}
@if cd ${WRKINST} 2>/dev/null; then ${SUDO} rm -rf ${WRKINST}; fi
. endif
. if ${clean:L:Mwork}
. if ${clean:L:Mflavors}
@for i in ${.CURDIR}/w-*; do \
if [ -L $$i ]; then ${SUDO} rm -rf `readlink $$i`; fi; \
${SUDO} rm -rf $$i; \
done
. else
@if [ -L ${WRKDIR} ]; then rm -rf `readlink ${WRKDIR}`; fi
@rm -rf ${WRKDIR}
. endif
. endif
. if ${clean:L:Mdist}
@${ECHO_MSG} "===> Dist cleaning for ${FULLPKGNAME${SUBPACKAGE}}"
@if cd ${FULLDISTDIR} 2>/dev/null; then \
if [ "${_DISTFILES}" -o "${_PATCHFILES}" ]; then \
rm -f ${_DISTFILES} ${_PATCHFILES}; \
fi \
fi
. if defined(DIST_SUBDIR)
-@rmdir ${FULLDISTDIR}
. endif
. endif
. if ${clean:L:Minstall}
. if ${clean:L:Msub}
. for _s in ${MULTI_PACKAGES}
-${SUDO} ${PKG_DELETE} ${clean:M-f} ${FULLPKGNAME${_s}}
. endfor
. else
-${SUDO} ${PKG_DELETE} ${clean:M-f} ${FULLPKGNAME${SUBPACKAGE}}
. endif
. endif
. if ${clean:L:Mpackages} || ${clean:L:Mpackage} && ${clean:L:Msub}
rm -f ${_PACKAGE_COOKIES}
. elif ${clean:L:Mpackage}
rm -f ${PKGFILE${SUBPACKAGE}}
. endif
.endif
.if !target(pre-distclean)
pre-distclean:
.endif
.if !target(distclean)
distclean: pre-distclean
@${MAKE} clean=dist
.endif
RECURSIVE_FETCH_LIST?= Yes
# packing list utilities. This generates a packing list from a recently
# installed port. Not perfect, but pretty close. The generated file
# will have to have some tweaks done by hand.
# Note: add @comment PACKAGE(arch=${MACHINE_ARCH}, opsys=${OPSYS}, vers=${OPSYS_VER})
# when port is installed or package created.
#
.if ${FAKE:L} == "yes"
_tmp:=
. for _v in ${SUBST_VARS}
_tmp += ${_v}='${${_v}}'
. endfor
plist update-plist: fake
@mkdir -p ${PKGDIR}
@DESTDIR=${WRKINST} PREFIX=${WRKINST}${PREFIX} LDCONFIG="${LDCONFIG}" \
MTREE_FILE=${WRKPKG}/mtree.spec \
INSTALL_PRE_COOKIE=${_INSTALL_PRE_COOKIE} \
perl ${PORTSDIR}/infrastructure/install/make-plist ${PKGDIR} ${_tmp}
.endif
update-patches:
@toedit=`WRKDIST=${WRKDIST} PATCHDIR=${PATCHDIR} \
PATCH_LIST='${PATCH_LIST}' DIFF_ARGS='${DIFF_ARGS}' \
DISTORIG=${DISTORIG} PATCHORIG=${PATCHORIG} \
/bin/sh ${PORTSDIR}/infrastructure/build/update-patches`; \
case $$toedit in "");; \
*) read i?'edit patches: '; \
cd ${PATCHDIR} && $${VISUAL:-$${EDIT:-/usr/bin/vi}} $$toedit;; esac
################################################################
# The special package-building targets
# You probably won't need to touch these
################################################################
# mirroring utilities
.if defined(DIST_SUBDIR)
_ALLFILES=${ALLFILES:S/^/${DIST_SUBDIR}\//}
.else
_ALLFILES=${ALLFILES}
.endif
fetch-makefile:
.if !defined(COMES_WITH)
@echo -n "all"
. if ${PERMIT_DISTFILES_FTP:L} == "yes"
@echo -n " ftp"
. endif
. if ${PERMIT_DISTFILES_CDROM:L} == "yes"
@echo -n " cdrom"
. endif
@echo ":: ${PKGPATH}/${FULLPKGNAME}"
@cd ${.CURDIR} && exec ${MAKE} __FETCH_ALL=Yes __ARCH_OK=Yes NO_IGNORE=Yes NO_WARNINGS=Yes _fetch-makefile-helper
.endif
_fetch-makefile-helper:
# write generic package dependencies
@name='${PKGPATH}/${FULLPKGNAME}'; \
echo ".PHONY: $${name}"; \
case '${RECURSIVE_FETCH_LIST:L}' in yes) \
echo "$${name}:: "`${MAKE} depends-list package-depends FULL_PACKAGE_NAME=Yes |${_SORT_DEPENDS}`;; \
esac; \
echo "$${name}:: ${_ALLFILES}"
.if !empty(ALLFILES)
. for _F in ${_ALLFILES}
@echo '${_F}: $$F'
@echo -n '\t@MAINTAINER="${MAINTAINER}" '
. if defined(DIST_SUBDIR)
@echo -n 'DIST_SUBDIR="${DIST_SUBDIR}" '
. endif
@echo '\\'
@select='${_EVERYTHING:M*${_F:S@^${DIST_SUBDIR}/@@}\:[0-9]}'; \
${_SITE_SELECTOR}; \
echo "\t SITES=\"$$sites\" \\"
. if !defined(NO_CHECKSUM) && !empty(_CKSUMFILES:M${_F})
@checksum_file=${CHECKSUM_FILE}; \
test -f $$checksum_file || checksum_file=${MD5_FILE}; \
if [ ! -f $$checksum_file ]; then \
echo >&2 'Missing checksum file: $$checksum_file'; \
echo '\t ERROR="no checksum file" \\'; \
else \
for c in ${PREFERRED_CIPHERS}; do \
if set -- `grep -i "^$$c (${_F})" $$checksum_file`; then break; fi; \
done; \
case "$$4" in \
"") \
echo >&2 "No checksum recorded for ${_F}."; \
echo '\t ERROR="no checksum" \\';; \
"IGNORE") \
echo >&2 "Checksum for ${_F} is IGNORE in $$checksum_file"; \
echo >&2 'but file is not in $${IGNORE_FILES}'; \
echo '\t ERROR="IGNORE inconsistent" \\';; \
*) \
echo "\t CIPHER=\"$$c\" CKSUM=\"$$4\" \\";; \
esac; \
fi
. endif
@echo '\t $${EXEC} $${FETCH} "$$@"'
. endfor
.endif
@echo
# The README.html target needs full information (this is passed via
# depends-list and package-depends)
FULL_PACKAGE_NAME?=No
# Make variables to pass along on recursive builds
_DEPEND_THRU=FULL_PACKAGE_NAME=${FULL_PACKAGE_NAME}
# XXX
package-name:
. if (${FULL_PACKAGE_NAME:L} == "yes")
@${_DEPEND_ECHO} '${PKGPATH}/${FULLPKGNAME${SUBPACKAGE}}'
. else
@${_DEPEND_ECHO} '${FULLPKGNAME${SUBPACKAGE}}'
. endif
# Build a package but don't check the package cookie
.if !target(repackage)
repackage: pre-repackage package
pre-repackage:
@rm -f ${_PACKAGE_COOKIES}
.endif
# Internal variables, used by dependencies targets
# Only keep pkg:dir spec
.if defined(LIB_DEPENDS) || defined(MISC_DEPENDS)
_ALWAYS_DEP2 = ${LIB_DEPENDS:C/^[^:]*:([^:]*:[^:]*).*$/\1/} \
${MISC_DEPENDS:C/^[^:]*:([^:]*:[^:]*).*$/\1/}
_ALWAYS_DEP3 = ${MISC_DEPENDS:C/^[^:]*:([^:]*:[^:]*).*$/\1/}
_ALWAYS_DEP= ${_ALWAYS_DEP2:C/[^:]*://}
.else
_ALWAYS_DEP3=
_ALWAYS_DEP2=
_ALWAYS_DEP=
.endif
.if defined(RUN_DEPENDS)
_RUN_DEP2 = ${RUN_DEPENDS:C/^[^:]*:([^:]*:[^:]*).*$/\1/}
_RUN_DEP = ${_RUN_DEP2:C/[^:]*://}
.else
_RUN_DEP2=
_RUN_DEP=
.endif
.if defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS)
_BUILD_DEP2 = ${FETCH_DEPENDS:C/^[^:]*:([^:]*:[^:]*).*$/\1/} \
${BUILD_DEPENDS:C/^[^:]*:([^:]*:[^:]*).*$/\1/}
_BUILD_DEP = ${_BUILD_DEP2:C/[^:]*://}
.else
_BUILD_DEP2=
_BUILD_DEP=
.endif
_LIB_DEP2= ${LIB_DEPENDS}
_RUN_DEP2+= ${_ALWAYS_DEP3}
_BUILD_DEP2+=${_ALWAYS_DEP3}
.if !target(clean-depends)
clean-depends:
. if !empty(_ALWAYS_DEP) || !empty(_BUILD_DEP) || !empty(_RUN_DEP)
@unset FLAVOR SUBPACKAGE || true; \
for dir in \
`echo ${_ALWAYS_DEP} ${_BUILD_DEP} ${_RUN_DEP} \
| tr '\040' '\012' | sort -u`; do \
${_flavor_fragment}; \
eval $$toset ${MAKE} CLEANDEPENDS=No ${_DEPEND_THRU} clean clean-depends; \
done
. endif
.endif
# This target generates an index entry suitable for aggregation into
# a large index. Format is:
#
# distribution-name|port-path|installation-prefix|comment| \
# description-file|maintainer|categories|lib-deps|build-deps|run-deps| \
# for-arch|package-cdrom|package-ftp|distfiles-cdrom|distfiles-ftp
#
describe:
.if !defined(NO_DESCRIBE)
. if !defined(PACKAGING) && defined(MULTI_PACKAGES)
@cd ${.CURDIR} && SUBPACKAGE='${SUBPACKAGE}' FLAVOR='${FLAVOR}' PACKAGING='${SUBPACKAGE}' exec ${MAKE} describe
. else
@echo -n "${FULLPKGNAME${SUBPACKAGE}}|${FULLPKGPATH}|"
. if ${PREFIX} == ${LOCALBASE}
@echo -n "|"
. else
@echo -n "${PREFIX}|"
. endif
@echo -n ${_COMMENT}"|"; \
if [ -f ${DESCR} ]; then \
echo -n "${DESCR:S,^${PORTSDIR}/,,}|"; \
else \
echo -n "/dev/null|"; \
fi; \
echo -n "${MAINTAINER}|${CATEGORIES}|"
. for _d in LIB BUILD RUN
. if !empty(_${_d}_DEP2)
@cd ${.CURDIR} && _FINAL_ECHO=: _INITIAL_ECHO=: exec ${MAKE} ${_d:L}-depends-list
. endif
@echo -n "|"
. endfor
@case "${ONLY_FOR_ARCHS}" in \
"") case "${NOT_FOR_ARCHS}" in \
"") echo -n "any|";; \
*) echo -n "!${NOT_FOR_ARCHS}|";; \
esac;; \
*) echo -n "${ONLY_FOR_ARCHS}|";; \
esac
. if defined(_BAD_LICENSING)
@echo "?|?|?|?"
. else
. if ${PERMIT_PACKAGE_CDROM:L} == "yes"
@echo -n "y|"
. else
@echo -n "n|"
. endif
. if ${PERMIT_PACKAGE_FTP:L} == "yes"
@echo -n "y|"
. else
@echo -n "n|"
. endif
. if ${PERMIT_DISTFILES_CDROM:L} == "yes"
@echo -n "y|"
. else
@echo -n "n|"
. endif
. if ${PERMIT_DISTFILES_FTP:L} == "yes"
@echo "y"
. else
@echo "n"
. endif
. endif
. if defined(MULTI_PACKAGES) && empty(SUBPACKAGE)
. for _sub in ${MULTI_PACKAGES}
@cd ${.CURDIR} && SUBPACKAGE='${_sub}' FLAVOR='${FLAVOR}' PACKAGING='${_sub}' exec ${MAKE} describe
. endfor
. endif
. endif
.endif
README.html:
@echo ${FULLPKGNAME${SUBPACKAGE}} | ${HTMLIFY} > $@.tmp3
.if !empty(_ALWAYS_DEP) || !empty(_BUILD_DEP) || target(depends-list)
@cd ${.CURDIR} && ${MAKE} depends-list FULL_PACKAGE_NAME=Yes | ${_SORT_DEPENDS}>$@.tmp1
.endif
.if !empty(_ALWAYS_DEP) || !empty(_RUN_DEP) || target(package-depends)
@cd ${.CURDIR} && ${MAKE} package-depends FULL_PACKAGE_NAME=Yes | ${_SORT_DEPENDS} >$@.tmp2
.endif
.if defined(HOMEPAGE)
@echo 'See <a href="${HOMEPAGE}">${HOMEPAGE}</a> for details.' >$@.tmp4
.else
@echo "" >$@.tmp4
.endif
.for I in 1 2
@if [ -s $@.tmp$I ]; then \
{ cat $@.tmp$I | while read n; do \
j=`dirname $$n|${HTMLIFY}`; k=`basename $$n|${HTMLIFY}`; \
echo "<li><a href=\"${PKGDEPTH}/$$j/README.html\">$$k</a>"; \
done; } >$@.tmp$Ia; \
else \
echo "<li>(none)" > $@.tmp$Ia; \
fi
.endfor
@cat ${README_NAME} | \
sed -e 's|%%PORT%%|'"`echo ${PKGPATH} | ${HTMLIFY}`"'|g' \
-e '/%%PKG%%/r$@.tmp3' -e '//d' \
-e '/%%COMMENT%%/r${PKGDIR}/COMMENT' -e '//d' \
-e '/%%DESCR%%/r${PKGDIR}/DESCR' -e '//d' \
-e '/%%HOMEPAGE%%/r$@.tmp4' -e '//d' \
-e '/%%BUILD_DEPENDS%%/r$@.tmp1a' -e '//d' \
-e '/%%RUN_DEPENDS%%/r$@.tmp2a' -e '//d' \
>> $@
@rm -f $@.tmp*
.if !target(print-depends-list)
print-depends-list:
. if !empty(_ALWAYS_DEP) || !empty(_BUILD_DEP) || target(depends-list)
@echo -n 'This port requires package(s) "'
@unset FLAVOR SUBPACKAGE || true; \
echo -n `cd ${.CURDIR} && ${MAKE} ${_DEPEND_THRU} depends-list | ${_SORT_DEPENDS}`
@echo '" to build.'
. endif
.endif
.if !target(print-package-depends)
print-package-depends:
. if !empty(_ALWAYS_DEP) || !empty(_RUN_DEP) || target(package-depends)
@echo -n 'This port requires package(s) "'
@unset FLAVOR SUBPACKAGE || true; \
echo -n `cd ${.CURDIR} && ${MAKE} ${_DEPEND_THRU} package-depends | ${_SORT_DEPENDS}`
@echo '" to run.'
. endif
.endif
.if !target(recurse-build-depends)
recurse-build-depends:
. if !empty(_ALWAYS_DEP) || !empty(_BUILD_DEP) || !empty(_RUN_DEP)
@pname=`cd ${.CURDIR} && ${MAKE} _DEPEND_ECHO='echo -n' package-name ${_DEPEND_THRU}`; \
unset FLAVOR SUBPACKAGE || true; \
for dir in `echo ${_ALWAYS_DEP} ${_BUILD_DEP} ${_RUN_DEP} \
| tr '\040' '\012' | sort -u`; do \
${_flavor_fragment}; \
if ! eval $$toset ${MAKE} _DEPEND_ECHO=\"echo $$pname\" package-name recurse-build-depends ${_DEPEND_THRU}; then \
echo 1>&2 "*** Problem checking deps in \"$$dir\"."; \
exit 1; \
fi; \
done
. else
@pname=`cd ${.CURDIR} && ${MAKE} _DEPEND_ECHO='echo -n' package-name`; echo $$pname $$pname
. endif
.endif
.if !target(depends-list)
depends-list:
. if !empty(_ALWAYS_DEP) || !empty(_BUILD_DEP)
@unset FLAVOR SUBPACKAGE || true; \
for dir in `echo ${_ALWAYS_DEP} ${_BUILD_DEP} \
| tr '\040' '\012' | sort -u`; do \
${_flavor_fragment}; \
if ! eval $$toset ${MAKE} recurse-build-depends ${_DEPEND_THRU}; then \
echo 1>&2 "*** Problem checking deps in \"$$dir\"."; \
exit 1; \
fi; \
done
. endif
.endif
# Build (recursively) a list of package dependencies suitable for tsort
.if !target(recurse-package-depends)
recurse-package-depends:
. if !empty(_ALWAYS_DEP) || !empty(_RUN_DEP)
@pname=`cd ${.CURDIR} && ${MAKE} _DEPEND_ECHO='echo -n' package-name ${_DEPEND_THRU}`; \
unset FLAVOR SUBPACKAGE || true; \
for dir in `echo ${_ALWAYS_DEP} ${_RUN_DEP} \
| tr '\040' '\012' | sort -u`; do \
${_flavor_fragment}; \
if ! eval $$toset ${MAKE} _DEPEND_ECHO=\"echo $$pname\" package-name recurse-package-depends ${_DEPEND_THRU}; then \
echo 1>&2 "*** Problem checking deps in \"$$dir\"." ; \
exit 1; \
fi; \
done
. else
@pname=`cd ${.CURDIR} && ${MAKE} _DEPEND_ECHO='echo -n' package-name`; echo $$pname $$pname
. endif
.endif
# Print list of all libraries we're allowed to depend upon.
_recurse-lib-depends:
.for _i in ${LIB_DEPENDS}
@unset FLAVOR SUBPACKAGE || true; \
echo '${_i}' | { \
IFS=:; read dep pkg dir target; \
${_flavor_fragment}; \
IFS=,; for j in $$dep; do echo $$j; done; \
eval $$toset ${MAKE} ${_DEPEND_THRU} _recurse-lib-depends; \
}
.endfor
.for _i in ${RUN_DEPENDS}
@unset FLAVOR SUBPACKAGE || true; \
echo '${_i}' | { \
IFS=:; read dep pkg dir target; \
${_flavor_fragment}; \
eval $$toset ${MAKE} ${_DEPEND_THRU} _recurse-lib-depends; \
}
.endfor
.if !target(package-depends)
package-depends:
. if !empty(_ALWAYS_DEP) || !empty(_RUN_DEP)
@unset FLAVOR SUBPACKAGE || true; \
for dir in `echo ${_ALWAYS_DEP} ${_RUN_DEP} \
| tr '\040' '\012' | sort -u`; do \
${_flavor_fragment}; \
if ! eval $$toset ${MAKE} recurse-package-depends ${_DEPEND_THRU}; then \
echo 1>&2 "*** Problem checking deps in \"$$dir\"." ; \
exit 1; \
fi; \
done
. endif
.endif
# recursively build a list of dirs to pass to tsort...
_recurse-dir-depends:
.if !empty(_ALWAYS_DEP) || !empty(_BUILD_DEP) || !empty(_RUN_DEP)
@unset FLAVOR SUBPACKAGE || true; \
for dir in `echo ${_ALWAYS_DEP} ${_BUILD_DEP} ${_RUN_DEP} \
| tr '\040' '\012' | sort -u`; do \
echo "$$self $$dir"; \
self2="$$dir"; \
${_flavor_fragment}; \
toset="$$toset self=\"$$self2\""; \
if ! eval $$toset ${MAKE} _recurse-dir-depends ${_DEPEND_THRU}; then \
echo 1>&2 "*** Problem checking deps in \"$$dir\"."; \
exit 1; \
fi; \
done
.endif
# recursively build a list of dirs to pass to tsort...
dir-depends:
.if !empty(_ALWAYS_DEP) || !empty(_BUILD_DEP)
@unset FLAVOR SUBPACKAGE || true; \
for dir in `echo ${_ALWAYS_DEP} ${_BUILD_DEP} \
| tr '\040' '\012' | sort -u`; do \
echo "${FULLPKGPATH} $$dir"; \
self2="$$dir"; \
${_flavor_fragment}; \
toset="$$toset self=\"$$self2\""; \
if ! eval $$toset ${MAKE} _recurse-dir-depends ${_DEPEND_THRU}; then \
echo 1>&2 "*** Problem checking deps in \"$$dir\"."; \
exit 1; \
fi; \
done
.else
@echo "${FULLPKGPATH} ${FULLPKGPATH}"
.endif
.for _i in RUN BUILD LIB
${_i:L}-depends-list:
. if !empty(_${_i}_DEP2)
@unset FLAVOR SUBPACKAGE || true; \
: $${_INITIAL_ECHO:='echo -n "This port requires \""'}; \
: $${_ECHO='echo -n'}; \
: $${_FINAL_ECHO:='echo "\" for ${_i:L}."'}; space=''; \
eval $${_INITIAL_ECHO}; \
for spec in `echo '${_${_i}_DEP2}' \
| tr '\040' '\012' | sort -u`; do \
$${_ECHO} "$$space$${spec}"; \
space=' '; \
done; eval $${_FINAL_ECHO}
. endif
.endfor
# recursively build a list of dirs to pass to tsort...
_package-recurse-dir-depends:
.if !empty(_ALWAYS_DEP) || !empty(_RUN_DEP)
@unset FLAVOR SUBPACKAGE || true; \
for dir in `echo ${_ALWAYS_DEP} ${_RUN_DEP} \
| tr '\040' '\012' | sort -u`; do \
echo "$$self $$dir"; \
self2="$$dir"; \
${_flavor_fragment}; \
toset="$$toset self=\"$$self2\""; \
if ! eval $$toset ${MAKE} _package-recurse-dir-depends ${_DEPEND_THRU}; then \
echo 1>&2 "*** Problem checking deps in \"$$dir\"."; \
exit 1; \
fi; \
done
.endif
# recursively build a list of dirs to pass to tsort...
package-dir-depends:
.if !empty(_ALWAYS_DEP) || !empty(_RUN_DEP)
@unset FLAVOR SUBPACKAGE || true; \
for dir in `echo ${_ALWAYS_DEP} ${_RUN_DEP} \
| tr '\040' '\012' | sort -u`; do \
echo "${FULLPKGPATH} $$dir"; \
self2="$$dir"; \
${_flavor_fragment}; \
toset="$$toset self=\"$$self2\""; \
if ! eval $$toset ${MAKE} _package-recurse-dir-depends ${_DEPEND_THRU}; then \
echo 1>&2 "*** Problem checking deps in \"$$dir\"."; \
exit 1; \
fi; \
done
.else
@echo "${FULLPKGPATH} ${FULLPKGPATH}"
.endif
_solve-package-depends:
.if !empty(_RUN_DEP2)
@unset FLAVOR SUBPACKAGE || true; \
: $${self:=self}; \
for spec in `echo '${_RUN_DEP2}' \
| tr '\040' '\012' | sort -u`; do \
dir=$${spec#*:}; pkg=$${spec%:*}; \
${_flavor_fragment}; \
default=`eval $$toset ${MAKE} _print-packagename`; \
: $${pkg:=$$default}; \
echo "@newdepend $$self:$$pkg:$$default"; \
toset="$$toset self=\"$$default\""; \
if ! eval $$toset ${MAKE} _solve-package-depends; then \
echo 1>&2 "*** Problem checking deps in \"$$dir\"." ; \
exit 1; \
fi; \
done
.endif
.if !defined(NO_SHARED_LIBS) && defined(LIB_DEPENDS) && !empty(LIB_DEPENDS)
. for _i in ${LIB_DEPENDS}
@unset FLAVOR SUBPACKAGE || true; \
: $${self:=self}; \
echo '${_i}'|{ \
IFS=:; read dep pkg dir target; \
${_flavor_fragment}; \
libspecs='';comma=''; \
default=`eval $$toset ${MAKE} _print-packagename`; \
case "X$$pkg" in X) pkg=`echo $$default|sed -e 's,-[0-9].*,-*,'`;; esac; \
if pkg dependencies check $$pkg; then \
listlibs='ls $$shdir 2>/dev/null'; \
else \
eval $$toset ${MAKE} ${PKGREPOSITORY}/$$default.tgz >/dev/null; \
listlibs='pkg_info -L ${PKGREPOSITORY}/$$default.tgz|grep $$shdir|sed -e "s,^$$shdir/,,"'; \
fi; \
IFS=,; for d in $$dep; do \
${_libresolve_fragment}; \
case "$$check" in \
*.a) continue;; \
Missing\ library|Error:*) \
echo 1>&2 "Can't resolve libspec $$d"; \
exit 1;; \
*) \
libspecs="$$libspecs$$comma$$shprefix$$check"; \
comma=',';; \
esac; \
done; \
case "X$$libspecs" in \
X) ;;\
*) \
echo "@libdepend $$self:$$libspecs:$$pkg:$$default"; \
toset="$$toset self=\"$$default\""; \
if ! eval $$toset ${MAKE} _solve-package-depends; then \
echo 1>&2 "*** Problem checking deps in \"$$dir\"." ; \
exit 1; \
fi;; \
esac; \
}
. endfor
.endif
README_NAME?= ${TEMPLATES}/README.port
.if !target(readmes)
readmes: readme
.endif
.if !target(readme)
readme:
@rm -f README.html
@cd ${.CURDIR} && exec ${MAKE} README_NAME=${README_NAME} README.html
.endif
HTMLIFY= sed -e 's/&/\&amp;/g' -e 's/>/\&gt;/g' -e 's/</\&lt;/g'
.if !target(print-depends)
print-depends:
@cd ${.CURDIR} && exec ${MAKE} FULL_PACKAGE_NAME=Yes print-depends-list print-package-depends
.endif
.if defined(VARNAME)
show:
@echo ${${VARNAME}:Q}
.endif
# Depend is generally meaningless for arbitrary ports, but if someone wants
# one they can override this. This is just to catch people who've gotten into
# the habit of typing `make depend all install' as a matter of course.
#
.if !target(depend)
depend:
.endif
# Same goes for tags
.if !target(tags)
tags:
.endif
link-categories:
.for _CAT in ${CATEGORIES}
@linkname=${PORTSDIR}/${_CAT}/`basename ${.CURDIR}`; \
if [ ! -e $$linkname ]; then \
echo "$$linkname -> ${.CURDIR}"; \
mkdir -p ${PORTSDIR}/${_CAT}; \
ln -s ${.CURDIR} $$linkname; \
fi
.endfor
unlink-categories:
.for _CAT in ${CATEGORIES}
@linkname=${PORTSDIR}/${_CAT}/`basename ${.CURDIR}`; \
if [ -L $$linkname ]; then \
echo "rm $$linkname"; \
rm $$linkname; \
if rmdir ${PORTSDIR}/${_CAT} 2>/dev/null; then \
echo "rmdir ${PORTSDIR}/${_CAT}"; \
fi; \
fi
.endfor
.if ${FAKE:L} == "no"
. include "${PORTSDIR}/infrastructure/mk/old-install.mk"
.endif
.if defined(ERRORS)
.BEGIN:
. for _m in ${ERRORS}
@echo 1>&2 ${_m}
. endfor
. if !empty(ERRORS:M"Fatal\:*")
@exit 1
. endif
.endif
.PHONY: \
addsum all build build-depends regress regress-depends checkpatch \
checksum clean clean-depends configure deinstall \
delete-package delete-package-links depend depends depends-list \
describe distclean do-build do-configure do-extract \
do-fetch do-install do-package do-patch extract list-distfiles \
fetch fetch-depends install lib-depends makesum \
cdrom-packages ftp-packages \
misc-depends package package-depends package-links package-name \
package-noinstall patch plist update-plist update-patches post-build \
post-configure post-extract post-fetch post-install post-package \
post-patch pre-build pre-clean pre-configure pre-distclean \
pre-extract pre-fetch pre-install pre-package pre-patch \
pre-repackage print-depends-list print-package-depends readme \
readmes rebuild reinstall \
repackage run-depends tags uninstall fetch-all print-depends \
recurse-build-depends recurse-package-depends \
distpatch real-distpatch do-distpatch post-distpatch show \
link-categories unlink-categories _package _solve-package-depends \
dir-depends _recurse-dir-depends package-dir-depends \
_package-recurse-dir-depends recursebuild-depends-list run-depends-list \
bulk-packages bulk-do _recurse-lib-depends lib-depends-check
Reference in New Issue View Git Blame Copy Permalink