* Changes in zebra-0.92a
* Changes in bgpd
** Fix "^$" community list bug.
** Below command's Address Family specific configurations are added
nexthop-self
route-reflector-client
route-server-client
soft-reconfiguration inbound
* Changes in zebra
** Treat kernel type routes as EGP routes.
is moved over.
New to 1.8.1
* SNMP Alerts
* IDMEF XML output
* Limited wildcard regex support
* New normalization mode for http_decode
* many bug fixes
OpenBSD port changes:
FLAVOR=snmp now works
vtysh now works
Also, OpenBD specific fixes not listed below include a patch to correctly
get all interfaces from the kernel.
Changelog from e-mail:
* Changes in zebra-0.92
** Overall security is improved. Default umask is 0077.
* Changes in ripd
** If output interface is in simple password authentication mode,
substruct one from rtemax.
* Changes in bgpd
** IPv4 multicast and IPv6 unicast configuration is changed to so
called new config. All of AFI and SAFI specific configuration is
moved to "address-family" node. When you have many IPv6 only
configuration, you will see many "no neighbor X:X::X:X activate" line
in your configuration to disable IPv4 unicast NLRI exchange. In that
case please use "no bgp default ipv4-unicast" command to suppress the
output. Until zebra-0.93, old config is still left for compatibility.
Old config
==========
router bgp 7675
bgp router-id 10.0.0.1
redistribute connected
network 192.168.0.0/24
neighbor 10.0.0.2 remote-as 7675
ipv6 bgp network 3ffe:506::/33
ipv6 bgp network 3ffe:1800:e800::/40
ipv6 bgp aggregate-address 3ffe:506::/32
ipv6 bgp redistribute connected
ipv6 bgp neighbor 3ffe:506:1000::2 remote-as 1
New config
==========
router bgp 7675
bgp router-id 10.0.0.1
network 192.168.0.0/24
redistribute connected
neighbor 10.0.0.2 remote-as 7675
neighbor 3ffe:506:1000::2 remote-as 1
no neighbor 3ffe:506:1000::2 activate
!
address-family ipv6
network 3ffe:506::/33
network 3ffe:1800:e800::/40
aggregate-address 3ffe:506::/32
redistribute connected
neighbor 3ffe:506:1000::2 activate
exit-address-family
* Changes in ospfd
** Internal interface treatment is changed. Now ospfd can handle
multiple IP address for an interface.
** Redistribution of loopback interface's address works fine.
--
State Threads is an application library which provides a foundation
for writing fast and highly scalable Internet Applications on
UNIX-like platforms. It combines the simplicity of the multithreaded
programming paradigm, in which one thread supports each simultaneous
connection, with the performance and scalability of an event-driven
state machine architecture.
WWW: http://oss.sgi.com/projects/state-threads/
Submitted by Patroklos Argyroudis <argp@bsd.gr>
Submitted by Patroklos Argyroudis <argp@bsd.gr>.
ctrace is an IPv4 traceroute tool that supports many features missing
in standard 4.3BSD traceroute(8). It is programmed entirely in perl.
The more traditional traceroute(8) sends out either UDP or ICMP ECHO
packets with a TTL of one, and increments the TTL until the destination
has been reached. By printing the gateways that generate ICMP time
exceeded messages along the way, it is able to determine the path
packets are taking to reach the destination.
The problem is that with the widespread use of firewalls on the modern
Internet, many of the packets that traceroute(8) sends out end up being
filtered, making it impossible to completely trace the path to the
destination. However, in many cases, these firewalls will permit inbound
TCP packets to specific ports that hosts sitting behind the firewall are
listening for connections on. By sending out TCP SYN packets instead of
UDP or ICMP ECHO packets, tcptraceroute is able to bypass the most common
firewall filters.