jasper
db98266d5f
use ${FILESDIR} instead of hardcoding 'files/'
2014-04-20 10:00:21 +00:00
espie
a15981722b
I'm *really* not sure defaulting to >2 channels is a good idea.
2013-12-23 15:07:50 +00:00
espie
2d98db1697
PERMIT/REGRESS->TEST sweep
2013-03-10 22:55:01 +00:00
espie
2974da2e02
SH -> /bin/sh, no need for a variable there either
2011-10-21 17:43:30 +00:00
espie
2314c85f45
convert to new style depends
...
zap default spec that are not needed
convert libspecs as well
convert p* to REVISION.
No package changes
2010-11-15 00:22:45 +00:00
sthen
b18b7a4a66
new-style REVISIONS/LIB_DEPENDS
2010-09-06 00:04:28 +00:00
jakemsr
56cbd2c6ca
convert to sndio(7), which allows this port to be used with all
...
non-"isdn bullshit" audio devices OpenBSD currently (and most
likely ever will) supports. sndio(7) doesn't support audioamd(4)
(which is an isdn device), but the audio(4) backend here didn't
support that device either.
tested on a 195 MHz r10k O2 extracting install tarballs +
'cvs co ports' + repeatedly compiling tracker in a loop +
'find /', all running simultaneously over the built-in mec0 NIC,
a zaurus with hw.setperf set to 0 + 'find /' running on the
console + tracker and an audio device monitoring program run
from an ssh session through a wi(4) pcmcia card, a 233MHz
Toshiba Tecra 8000 with wss(4), and various other machines.
2010-06-30 11:50:51 +00:00
espie
658069d3a5
compile with gcc4
...
reenable flush, works with every soundcard I now have.
2010-05-17 18:10:05 +00:00
espie
17d70806a3
tweak FAKE_FLAGS semantics to saner defaults.
2008-01-04 17:48:33 +00:00
espie
581a3113fe
ouch, this old makefile is so bad, it's embarrassing.
...
Okay, I was young and stupid...
2007-12-27 16:34:19 +00:00
simon
ec8fc0fefe
remove surrounding quotes from COMMENT/PERMIT_*/BROKEN
2007-09-15 21:26:00 +00:00
espie
470294650d
base64 distinfo with SHA256
2007-04-05 15:37:40 +00:00
espie
fe5f67e0ef
better FAKE_FLAGS setup. Regen PLIST -> PKGNAME bump
2005-12-23 15:08:37 +00:00
naddy
199c30b4ac
SIZE
2005-01-05 15:47:05 +00:00
espie
48252a0ad4
WANTLIB markers
2004-11-21 17:51:44 +00:00
espie
79fe9efdfd
switch to new style PLISTS, using @lib, ditching DYNLIBDIR.
...
Replace two INSTALL scripts with @sample.
Reorder plists to match auto-generation, add comments for files that
don't get installed.
2004-08-06 14:37:27 +00:00
espie
37ff30aa59
@extra
2003-08-22 17:48:18 +00:00
sturm
ca4bae8577
- don't hardcode /etc, use SYSCONFDIR instead
...
- don't change SYSCONFDIR, use CONFDIR/SUBST_VARS instead and if neccessary
use "CONFIGURE_STYLE=gnu old" and explicitly set --sysconfdir=${CONFDIR}
a few more to come...
2003-05-12 18:02:44 +00:00
jsyn
43d7195899
quote COMMENTs; ok naddy@
2003-04-10 18:08:56 +00:00
naddy
e05e397ffc
No regression tests available.
2002-10-24 22:20:03 +00:00
espie
4eeb7add33
bump NEED_VERSION for distinfo
2002-03-21 20:35:40 +00:00
espie
5b37289c23
md5->distinfo
2002-03-21 19:59:18 +00:00
miod
1867506f6f
Marc Espie parle anglais comme une vache espagnole (-:
...
[for the others: Fix a typo]
2001-07-11 23:39:57 +00:00
espie
6cdfc2731a
Spring clean-up.
...
- rename patches to new style.
- bye, bye USE_GMAKE, we have recursive variables now.
- pass COPTS through.
- a few more patches so that we get most prototypes
- integrate COMMENT
2001-04-10 00:51:59 +00:00
espie
aa4a7733cc
Complete a few MAINTAINER names.
2000-10-22 14:02:46 +00:00
espie
54848dabf9
Fix my address. Dust off details.
2000-10-10 00:40:20 +00:00
espie
39c49b2f64
Various minor clean-ups:
...
- use new CONFIGURE_STYLE
- use PLIST/DESCR substitution to add HOMEPAGE and various fragments
- add systematic @comment $OpenBSD$ to PLIST
- remove FAKE=Yes
2000-06-10 17:39:11 +00:00
espie
2f1917c862
Licensing issues :)
...
Fake
Get a clean info file correctly installed.
2000-03-11 01:08:42 +00:00
espie
b3ed337056
Change MAKE_FLAGS to remove the -f.
...
Actually reading the Makefiles proved that about one third of them was
confused about this already...
2000-02-12 00:43:57 +00:00
espie
a813079932
Kill a large set of deprecated variables.
...
Thoroughly unsubtle, most mkdir -p should probably be INSTALL* at
*install stage, and echo/ECHO_MSG is somewhat unsorted.
It's quite possible I missed a few automated changes...
2000-02-11 01:09:59 +00:00
espie
28accd1d93
Use WRKDIST where appropriate.
2000-02-11 00:37:15 +00:00
brad
d9ca3e23c1
- white space to tabs
...
- add missing MASTER_SITES
- mkdir -> ${MKDIR}, cp -> ${CP}, rm -> ${RM}, sh -> ${SH}
1999-09-06 18:46:47 +00:00
angelos
47cef93336
Directory non-existant.
1999-08-18 01:59:36 +00:00
espie
c3ac4733dc
Crisper comments, remove unnecessary part, don't begin with an uppercase
...
unless semantically significant, remove trailing dot.
1999-04-20 01:09:51 +00:00
brad
79d052d920
correct install path of configuration file
1999-04-16 03:42:05 +00:00
brad
6bab311225
fix dependency lists, fix email address's and remove unnecessary comments
1999-04-01 06:20:02 +00:00
brad
d022737d79
remove unnecessary comments and fix email address's
1999-04-01 02:57:50 +00:00
espie
af742bbc72
work around a bug in wss: AUDIO_FLUSH hangs the device.
...
Temporary, until bug is fixed.
1999-03-05 16:25:49 +00:00
espie
44e196b7bf
Repair 16 bits. Easier to make it work when you've got 16 bit output
...
working.
1999-03-05 16:24:55 +00:00
marc
3e45db1680
add sha1 and rmd160 checksum to the existing md5 sums for all files;
...
Porters: please make sure you use bsd.port.mk 1.75 or later when
updating ports. That version of the makefile adds all sums. Previous
versions of the makefile will still work for people installing ports.
1999-03-04 05:55:44 +00:00
espie
6cd432ce2b
Added test module.
...
Okay'ed with Gryzor... good PR for Schatzruhe, he said.
1998-10-10 13:43:38 +00:00
espie
b49315e987
Added test module.
1998-10-10 13:43:04 +00:00
marc
3182befd5c
makefile tweaks
1998-10-07 00:22:52 +00:00
espie
65dc494456
True tracker port, with native OpenBSD audio, synchronization of the display
...
with sounds, numerous minor bug-fix, and authorization to redistribute.
1998-10-02 17:19:44 +00:00
angelos
8d212ae6e5
tracker port
1998-05-22 01:00:50 +00:00