cpet/openbsd-ports
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
fad175bb8e
openbsd-ports/net/nfdump/Makefile

66 lines
1.7 KiB
Makefile
Raw Normal View History

Build nftrack (from nfsen contribs directory), allowing tracking of TCP/UDP ports. To be used in conjunction with the PortTracker plugin for NfSen (not yet packaged). It's included in the nfprofile subpackage as it's normally used in conjunction with nfprofile and, like nfprofile, depends on the RRD libraries.
2010-06-04 07:28:42 -04:00
# $OpenBSD: Makefile,v 1.6 2010/06/04 11:28:42 sthen Exp $
import nfdump and nfprofile (the latter as a subpackage since not everyone needs that, and it pulls in heavier dependencies) -- -- -- The nfdump tools collect and process netflow data (v5, v7 and v9) on the command line. They are part of the NfSen project. nfcapd - netflow capture daemon. Reads the netflow data from the network and stores the data into files. Automatically rotate files every n minutes (typically every 5 minutes). nfcapd reads netflow v5, v7 and v9 flows transparently. You need one nfcapd process for each netflow stream. nfdump - netflow dump. Reads the netflow data from the files stored by nfcapd. Its syntax is similar to tcpdump. If you like tcpdump you will like nfdump. Displays netflow data and can create lots of top N statistics of flows IP addresses, ports etc in whichever order you like. nfreplay - netflow replay. Reads the netflow data from the files stored by nfcapd and sends it over the network to another host. A web front-end, NfSen, is available at http://nfsen.sourceforge.net/ -- -- -- nfprofile is a netflow profiler, which works with the nfdump tools. It reads the netflow data from the files stored by nfcapd, filters the netflow data according to the specified filter sets (profiles) and stores the filtered data into files for later use. -- -- -- thanks to eric@ for testing/feedback on an earlier version, and to upstream for rolling a new release including the patches as a result. "that should be in ports for sure" henning@
2008-05-21 18:28:35 -04:00
COMMENT-main = tools to collect and process netflow data
COMMENT-nfprofile = filters data from nfdump according to profiles
tighten up dependencies (use more specific version numbers).
2010-05-12 10:35:28 -04:00
V = 1.5.8
DISTNAME = nfdump-$V
Build nftrack (from nfsen contribs directory), allowing tracking of TCP/UDP ports. To be used in conjunction with the PortTracker plugin for NfSen (not yet packaged). It's included in the nfprofile subpackage as it's normally used in conjunction with nfprofile and, like nfprofile, depends on the RRD libraries.
2010-06-04 07:28:42 -04:00
NFSEN = nfsen-1.3.2
tighten up dependencies (use more specific version numbers).
2010-05-12 10:35:28 -04:00
FULLPKGNAME-main = nfdump-$Vp2
Build nftrack (from nfsen contribs directory), allowing tracking of TCP/UDP ports. To be used in conjunction with the PortTracker plugin for NfSen (not yet packaged). It's included in the nfprofile subpackage as it's normally used in conjunction with nfprofile and, like nfprofile, depends on the RRD libraries.
2010-06-04 07:28:42 -04:00
FULLPKGNAME-nfprofile = nfprofile-$Vp1
DISTFILES = ${DISTNAME}${EXTRACT_SUFX} \
${NFSEN}${EXTRACT_SUFX}:0
import nfdump and nfprofile (the latter as a subpackage since not everyone needs that, and it pulls in heavier dependencies) -- -- -- The nfdump tools collect and process netflow data (v5, v7 and v9) on the command line. They are part of the NfSen project. nfcapd - netflow capture daemon. Reads the netflow data from the network and stores the data into files. Automatically rotate files every n minutes (typically every 5 minutes). nfcapd reads netflow v5, v7 and v9 flows transparently. You need one nfcapd process for each netflow stream. nfdump - netflow dump. Reads the netflow data from the files stored by nfcapd. Its syntax is similar to tcpdump. If you like tcpdump you will like nfdump. Displays netflow data and can create lots of top N statistics of flows IP addresses, ports etc in whichever order you like. nfreplay - netflow replay. Reads the netflow data from the files stored by nfcapd and sends it over the network to another host. A web front-end, NfSen, is available at http://nfsen.sourceforge.net/ -- -- -- nfprofile is a netflow profiler, which works with the nfdump tools. It reads the netflow data from the files stored by nfcapd, filters the netflow data according to the specified filter sets (profiles) and stores the filtered data into files for later use. -- -- -- thanks to eric@ for testing/feedback on an earlier version, and to upstream for rolling a new release including the patches as a result. "that should be in ports for sure" henning@
2008-05-21 18:28:35 -04:00
CATEGORIES = net
HOMEPAGE = http://nfdump.sourceforge.net/
MAINTAINER = Stuart Henderson <sthen@openbsd.org>
# BSD
PERMIT_PACKAGE_CDROM = Yes
PERMIT_PACKAGE_FTP = Yes
PERMIT_DISTFILES_CDROM =Yes
PERMIT_DISTFILES_FTP = Yes
WANTLIB = c z
MASTER_SITES = ${MASTER_SITE_SOURCEFORGE:=nfdump/}
Build nftrack (from nfsen contribs directory), allowing tracking of TCP/UDP ports. To be used in conjunction with the PortTracker plugin for NfSen (not yet packaged). It's included in the nfprofile subpackage as it's normally used in conjunction with nfprofile and, like nfprofile, depends on the RRD libraries.
2010-06-04 07:28:42 -04:00
MASTER_SITES0 = ${MASTER_SITE_SOURCEFORGE:=nfsen/}
import nfdump and nfprofile (the latter as a subpackage since not everyone needs that, and it pulls in heavier dependencies) -- -- -- The nfdump tools collect and process netflow data (v5, v7 and v9) on the command line. They are part of the NfSen project. nfcapd - netflow capture daemon. Reads the netflow data from the network and stores the data into files. Automatically rotate files every n minutes (typically every 5 minutes). nfcapd reads netflow v5, v7 and v9 flows transparently. You need one nfcapd process for each netflow stream. nfdump - netflow dump. Reads the netflow data from the files stored by nfcapd. Its syntax is similar to tcpdump. If you like tcpdump you will like nfdump. Displays netflow data and can create lots of top N statistics of flows IP addresses, ports etc in whichever order you like. nfreplay - netflow replay. Reads the netflow data from the files stored by nfcapd and sends it over the network to another host. A web front-end, NfSen, is available at http://nfsen.sourceforge.net/ -- -- -- nfprofile is a netflow profiler, which works with the nfdump tools. It reads the netflow data from the files stored by nfcapd, filters the netflow data according to the specified filter sets (profiles) and stores the filtered data into files for later use. -- -- -- thanks to eric@ for testing/feedback on an earlier version, and to upstream for rolling a new release including the patches as a result. "that should be in ports for sure" henning@
2008-05-21 18:28:35 -04:00
- adjust for flow-tools port changes
2010-05-06 17:42:24 -04:00
CONFIGURE_STYLE = autoconf
AUTOCONF_VERSION = 2.61
import nfdump and nfprofile (the latter as a subpackage since not everyone needs that, and it pulls in heavier dependencies) -- -- -- The nfdump tools collect and process netflow data (v5, v7 and v9) on the command line. They are part of the NfSen project. nfcapd - netflow capture daemon. Reads the netflow data from the network and stores the data into files. Automatically rotate files every n minutes (typically every 5 minutes). nfcapd reads netflow v5, v7 and v9 flows transparently. You need one nfcapd process for each netflow stream. nfdump - netflow dump. Reads the netflow data from the files stored by nfcapd. Its syntax is similar to tcpdump. If you like tcpdump you will like nfdump. Displays netflow data and can create lots of top N statistics of flows IP addresses, ports etc in whichever order you like. nfreplay - netflow replay. Reads the netflow data from the files stored by nfcapd and sends it over the network to another host. A web front-end, NfSen, is available at http://nfsen.sourceforge.net/ -- -- -- nfprofile is a netflow profiler, which works with the nfdump tools. It reads the netflow data from the files stored by nfcapd, filters the netflow data according to the specified filter sets (profiles) and stores the filtered data into files for later use. -- -- -- thanks to eric@ for testing/feedback on an earlier version, and to upstream for rolling a new release including the patches as a result. "that should be in ports for sure" henning@
2008-05-21 18:28:35 -04:00
CONFIGURE_ARGS += ${CONFIGURE_SHARED} \
--enable-nfprofile \
- adjust for flow-tools port changes
2010-05-06 17:42:24 -04:00
--with-rrdpath=${LOCALBASE} \
import nfdump and nfprofile (the latter as a subpackage since not everyone needs that, and it pulls in heavier dependencies) -- -- -- The nfdump tools collect and process netflow data (v5, v7 and v9) on the command line. They are part of the NfSen project. nfcapd - netflow capture daemon. Reads the netflow data from the network and stores the data into files. Automatically rotate files every n minutes (typically every 5 minutes). nfcapd reads netflow v5, v7 and v9 flows transparently. You need one nfcapd process for each netflow stream. nfdump - netflow dump. Reads the netflow data from the files stored by nfcapd. Its syntax is similar to tcpdump. If you like tcpdump you will like nfdump. Displays netflow data and can create lots of top N statistics of flows IP addresses, ports etc in whichever order you like. nfreplay - netflow replay. Reads the netflow data from the files stored by nfcapd and sends it over the network to another host. A web front-end, NfSen, is available at http://nfsen.sourceforge.net/ -- -- -- nfprofile is a netflow profiler, which works with the nfdump tools. It reads the netflow data from the files stored by nfcapd, filters the netflow data according to the specified filter sets (profiles) and stores the filtered data into files for later use. -- -- -- thanks to eric@ for testing/feedback on an earlier version, and to upstream for rolling a new release including the patches as a result. "that should be in ports for sure" henning@
2008-05-21 18:28:35 -04:00
--enable-ftconv \
- adjust for flow-tools port changes
2010-05-06 17:42:24 -04:00
--with-ftpath=${LOCALBASE} \
import nfdump and nfprofile (the latter as a subpackage since not everyone needs that, and it pulls in heavier dependencies) -- -- -- The nfdump tools collect and process netflow data (v5, v7 and v9) on the command line. They are part of the NfSen project. nfcapd - netflow capture daemon. Reads the netflow data from the network and stores the data into files. Automatically rotate files every n minutes (typically every 5 minutes). nfcapd reads netflow v5, v7 and v9 flows transparently. You need one nfcapd process for each netflow stream. nfdump - netflow dump. Reads the netflow data from the files stored by nfcapd. Its syntax is similar to tcpdump. If you like tcpdump you will like nfdump. Displays netflow data and can create lots of top N statistics of flows IP addresses, ports etc in whichever order you like. nfreplay - netflow replay. Reads the netflow data from the files stored by nfcapd and sends it over the network to another host. A web front-end, NfSen, is available at http://nfsen.sourceforge.net/ -- -- -- nfprofile is a netflow profiler, which works with the nfdump tools. It reads the netflow data from the files stored by nfcapd, filters the netflow data according to the specified filter sets (profiles) and stores the filtered data into files for later use. -- -- -- thanks to eric@ for testing/feedback on an earlier version, and to upstream for rolling a new release including the patches as a result. "that should be in ports for sure" henning@
2008-05-21 18:28:35 -04:00
--enable-sflow
MULTI_PACKAGES = -main -nfprofile
tighten up dependencies (use more specific version numbers).
2010-05-12 10:35:28 -04:00
LIB_DEPENDS-main = ft:flow-tools->=0.68.5:net/flow-tools
import nfdump and nfprofile (the latter as a subpackage since not everyone needs that, and it pulls in heavier dependencies) -- -- -- The nfdump tools collect and process netflow data (v5, v7 and v9) on the command line. They are part of the NfSen project. nfcapd - netflow capture daemon. Reads the netflow data from the network and stores the data into files. Automatically rotate files every n minutes (typically every 5 minutes). nfcapd reads netflow v5, v7 and v9 flows transparently. You need one nfcapd process for each netflow stream. nfdump - netflow dump. Reads the netflow data from the files stored by nfcapd. Its syntax is similar to tcpdump. If you like tcpdump you will like nfdump. Displays netflow data and can create lots of top N statistics of flows IP addresses, ports etc in whichever order you like. nfreplay - netflow replay. Reads the netflow data from the files stored by nfcapd and sends it over the network to another host. A web front-end, NfSen, is available at http://nfsen.sourceforge.net/ -- -- -- nfprofile is a netflow profiler, which works with the nfdump tools. It reads the netflow data from the files stored by nfcapd, filters the netflow data according to the specified filter sets (profiles) and stores the filtered data into files for later use. -- -- -- thanks to eric@ for testing/feedback on an earlier version, and to upstream for rolling a new release including the patches as a result. "that should be in ports for sure" henning@
2008-05-21 18:28:35 -04:00
LIB_DEPENDS-nfprofile = rrd:rrdtool-*:net/rrdtool
tighten up dependencies (use more specific version numbers).
2010-05-12 10:35:28 -04:00
RUN_DEPENDS-nfprofile = :nfdump-$V:net/nfdump,-main
import nfdump and nfprofile (the latter as a subpackage since not everyone needs that, and it pulls in heavier dependencies) -- -- -- The nfdump tools collect and process netflow data (v5, v7 and v9) on the command line. They are part of the NfSen project. nfcapd - netflow capture daemon. Reads the netflow data from the network and stores the data into files. Automatically rotate files every n minutes (typically every 5 minutes). nfcapd reads netflow v5, v7 and v9 flows transparently. You need one nfcapd process for each netflow stream. nfdump - netflow dump. Reads the netflow data from the files stored by nfcapd. Its syntax is similar to tcpdump. If you like tcpdump you will like nfdump. Displays netflow data and can create lots of top N statistics of flows IP addresses, ports etc in whichever order you like. nfreplay - netflow replay. Reads the netflow data from the files stored by nfcapd and sends it over the network to another host. A web front-end, NfSen, is available at http://nfsen.sourceforge.net/ -- -- -- nfprofile is a netflow profiler, which works with the nfdump tools. It reads the netflow data from the files stored by nfcapd, filters the netflow data according to the specified filter sets (profiles) and stores the filtered data into files for later use. -- -- -- thanks to eric@ for testing/feedback on an earlier version, and to upstream for rolling a new release including the patches as a result. "that should be in ports for sure" henning@
2008-05-21 18:28:35 -04:00
Build nftrack (from nfsen contribs directory), allowing tracking of TCP/UDP ports. To be used in conjunction with the PortTracker plugin for NfSen (not yet packaged). It's included in the nfprofile subpackage as it's normally used in conjunction with nfprofile and, like nfprofile, depends on the RRD libraries.
2010-06-04 07:28:42 -04:00
post-build:
perl -pi -e 's,/usr/local,${LOCALBASE},g;' \
-e 's,/usr/X11R6,${X11BASE},g;' \
${WRKSRC}/../${NFSEN}/contrib/PortTracker/do_compile
cd ${WRKSRC}/../${NFSEN}/contrib/PortTracker; \
./do_compile
import nfdump and nfprofile (the latter as a subpackage since not everyone needs that, and it pulls in heavier dependencies) -- -- -- The nfdump tools collect and process netflow data (v5, v7 and v9) on the command line. They are part of the NfSen project. nfcapd - netflow capture daemon. Reads the netflow data from the network and stores the data into files. Automatically rotate files every n minutes (typically every 5 minutes). nfcapd reads netflow v5, v7 and v9 flows transparently. You need one nfcapd process for each netflow stream. nfdump - netflow dump. Reads the netflow data from the files stored by nfcapd. Its syntax is similar to tcpdump. If you like tcpdump you will like nfdump. Displays netflow data and can create lots of top N statistics of flows IP addresses, ports etc in whichever order you like. nfreplay - netflow replay. Reads the netflow data from the files stored by nfcapd and sends it over the network to another host. A web front-end, NfSen, is available at http://nfsen.sourceforge.net/ -- -- -- nfprofile is a netflow profiler, which works with the nfdump tools. It reads the netflow data from the files stored by nfcapd, filters the netflow data according to the specified filter sets (profiles) and stores the filtered data into files for later use. -- -- -- thanks to eric@ for testing/feedback on an earlier version, and to upstream for rolling a new release including the patches as a result. "that should be in ports for sure" henning@
2008-05-21 18:28:35 -04:00
post-install:
Build nftrack (from nfsen contribs directory), allowing tracking of TCP/UDP ports. To be used in conjunction with the PortTracker plugin for NfSen (not yet packaged). It's included in the nfprofile subpackage as it's normally used in conjunction with nfprofile and, like nfprofile, depends on the RRD libraries.
2010-06-04 07:28:42 -04:00
${INSTALL_PROGRAM} ${WRKSRC}/../${NFSEN}/contrib/PortTracker/nftrack \
${PREFIX}/bin/
${INSTALL_DATA_DIR} ${PREFIX}/share/doc/nfdump
${INSTALL_DATA} ${WRKSRC}/README ${PREFIX}/share/doc/nfdump
head -119 ${WRKSRC}/sflow.c > ${PREFIX}/share/doc/nfdump/COPYRIGHT
import nfdump and nfprofile (the latter as a subpackage since not everyone needs that, and it pulls in heavier dependencies) -- -- -- The nfdump tools collect and process netflow data (v5, v7 and v9) on the command line. They are part of the NfSen project. nfcapd - netflow capture daemon. Reads the netflow data from the network and stores the data into files. Automatically rotate files every n minutes (typically every 5 minutes). nfcapd reads netflow v5, v7 and v9 flows transparently. You need one nfcapd process for each netflow stream. nfdump - netflow dump. Reads the netflow data from the files stored by nfcapd. Its syntax is similar to tcpdump. If you like tcpdump you will like nfdump. Displays netflow data and can create lots of top N statistics of flows IP addresses, ports etc in whichever order you like. nfreplay - netflow replay. Reads the netflow data from the files stored by nfcapd and sends it over the network to another host. A web front-end, NfSen, is available at http://nfsen.sourceforge.net/ -- -- -- nfprofile is a netflow profiler, which works with the nfdump tools. It reads the netflow data from the files stored by nfcapd, filters the netflow data according to the specified filter sets (profiles) and stores the filtered data into files for later use. -- -- -- thanks to eric@ for testing/feedback on an earlier version, and to upstream for rolling a new release including the patches as a result. "that should be in ports for sure" henning@
2008-05-21 18:28:35 -04:00
CONFIGURE_ENV = LDFLAGS="${LDFLAGS} -L${X11BASE}/lib"
REGRESS_TARGET = test
REGRESS_FLAGS = TZ=CET
.include <bsd.port.mk>
Reference in New Issue Copy Permalink