openbsd-ports/x11/mplayer/pkg/DESCR

MPlayer is a movie player for LINUX (runs on many other Unices, and
non-x86 CPUs, see the documentation). It plays most MPEG, VOB, AVI,
VIVO, ASF/WMV, QT/MOV, FLI, NuppelVideo, yuv4mpeg, FILM, RoQ, and some
RealMedia files, supported by many native, XAnim, and Win32 DLL codecs.
You can watch VideoCD, SVCD, DVD, 3ivx, FLI, and even DivX movies too
(and you don't need the avifile library at all!).

Another big feature of mplayer is the wide range of supported output
drivers.  It works with X11, Xv, DGA, OpenGL, SVGAlib, fbdev, AAlib, but
you can use SDL (and this way all drivers of SDL), VESA (on every VESA
compatible card, even without X!), and some lowlevel card-specific
drivers (for Matrox, 3Dfx and Radeon) too! Most of them supports
software or hardware scaling, so you can enjoy movies in fullscreen.
MPlayer supports displaying through some hardware MPEG decoder boards,
such as the DVB and DXR3/Hollywood+ !  And what about the nice big
antialiased shaded subtitles (9 supported types!!!) with european/ISO
8859-1,2 (hungarian, english, czech, etc), cyrillic, korean fonts, and
OSD?

MPlayer might fail due to lack of shared memory, eg when using gui mode
under KDE.  Starting with OpenBSD 3.3, sysctl(8) can modify the shared
memory parameters.  A reasonable choice would be:

kern.shminfo.shmseg=32
kern.shminfo.shmall=32768

Flavors:

  arts: enables arts, requires x11/kde/arts3

  esd: enables esd, requires audio/esound

  sdl: enables sdl, requires devel/sdl

  ggi: enables ggi, requires graphics/ggi

  debug: enables debugging information

  mad: enables mad, requires audio/mad

  no_x11: disables gui and most video output.

  aa: enables ascii art, requires graphics/aalib

  win32: enables win32 codecs (i386-only)  To use this flavor, you
         need to enable the machdep.userldt sysctl, either via
         /etc/sysctl.conf, or by entering (as root):
		sysctl -w machdep.userldt=1
Import of mplayer-0.90pre3 - Movie Player MPlayer is a movie player for LINUX (runs on many other Unices, and non-x86 CPUs, see the documentation). It plays most MPEG, VOB, AVI, VIVO, ASF/WMV, QT/MOV, FLI, NuppelVideo, yuv4mpeg, FILM, RoQ, and some RealMedia files, supported by many native, XAnim, and Win32 DLL codecs. You can watch VideoCD, SVCD, DVD, 3ivx, FLI, and even DivX movies too (and you don't need the avifile library at all!). Submitted by Björn Sandell <biorn@dce.chalmers.se>, work also done by me Withstanding issues: see how to deal with optimization detection at build time so that binary packages can be created; check make it work on platforms other than i386, etc. things can be done in-tree. 2002-05-09 01:19:10 -04:00			`MPlayer is a movie player for LINUX (runs on many other Unices, and`
			`non-x86 CPUs, see the documentation). It plays most MPEG, VOB, AVI,`
			`VIVO, ASF/WMV, QT/MOV, FLI, NuppelVideo, yuv4mpeg, FILM, RoQ, and some`
			`RealMedia files, supported by many native, XAnim, and Win32 DLL codecs.`
			`You can watch VideoCD, SVCD, DVD, 3ivx, FLI, and even DivX movies too`
			`(and you don't need the avifile library at all!).`

			`Another big feature of mplayer is the wide range of supported output`
			`drivers. It works with X11, Xv, DGA, OpenGL, SVGAlib, fbdev, AAlib, but`
			`you can use SDL (and this way all drivers of SDL), VESA (on every VESA`
			`compatible card, even without X!), and some lowlevel card-specific`
			`drivers (for Matrox, 3Dfx and Radeon) too! Most of them supports`
			`software or hardware scaling, so you can enjoy movies in fullscreen.`
			`MPlayer supports displaying through some hardware MPEG decoder boards,`
			`such as the DVB and DXR3/Hollywood+ ! And what about the nice big`
			`antialiased shaded subtitles (9 supported types!!!) with european/ISO`
			`8859-1,2 (hungarian, english, czech, etc), cyrillic, korean fonts, and`
			`OSD?`

- new version of default skin - add message to PLIST which mentions the possibility of needing additional setup - mention the use of sysctl(8) to modify shared memory settings in DESCR -- From: MAINTAINER 2003-02-17 09:55:34 -05:00			`MPlayer might fail due to lack of shared memory, eg when using gui mode`
			`under KDE. Starting with OpenBSD 3.3, sysctl(8) can modify the shared`
			`memory parameters. A reasonable choice would be:`

			`kern.shminfo.shmseg=32`
			`kern.shminfo.shmall=32768`
added vorbis flavor Prior to this patch, mplayer is incompatible of recognizing an AVI/MPEG4 (DivX) encoded with oggvorbis audio codec. It will refuse to play the movie, as it is unrecognized. This patch allows these types of AVIs to play. ok maintainer, pvalchev@ 2002-08-15 15:00:40 -04:00
Import of mplayer-0.90pre3 - Movie Player MPlayer is a movie player for LINUX (runs on many other Unices, and non-x86 CPUs, see the documentation). It plays most MPEG, VOB, AVI, VIVO, ASF/WMV, QT/MOV, FLI, NuppelVideo, yuv4mpeg, FILM, RoQ, and some RealMedia files, supported by many native, XAnim, and Win32 DLL codecs. You can watch VideoCD, SVCD, DVD, 3ivx, FLI, and even DivX movies too (and you don't need the avifile library at all!). Submitted by Björn Sandell <biorn@dce.chalmers.se>, work also done by me Withstanding issues: see how to deal with optimization detection at build time so that binary packages can be created; check make it work on platforms other than i386, etc. things can be done in-tree. 2002-05-09 01:19:10 -04:00			`Flavors:`

Clean up flavors: drop lzo, always use cdda and document those that were missing. ok pvalchev@ 2003-12-04 17:05:09 -05:00			`arts: enables arts, requires x11/kde/arts3`

pasto, from Jared Yanovich ok pvalchev@ 2003-12-16 11:35:03 -05:00			`esd: enables esd, requires audio/esound`
Clean up flavors: drop lzo, always use cdda and document those that were missing. ok pvalchev@ 2003-12-04 17:05:09 -05:00
Import of mplayer-0.90pre3 - Movie Player MPlayer is a movie player for LINUX (runs on many other Unices, and non-x86 CPUs, see the documentation). It plays most MPEG, VOB, AVI, VIVO, ASF/WMV, QT/MOV, FLI, NuppelVideo, yuv4mpeg, FILM, RoQ, and some RealMedia files, supported by many native, XAnim, and Win32 DLL codecs. You can watch VideoCD, SVCD, DVD, 3ivx, FLI, and even DivX movies too (and you don't need the avifile library at all!). Submitted by Björn Sandell <biorn@dce.chalmers.se>, work also done by me Withstanding issues: see how to deal with optimization detection at build time so that binary packages can be created; check make it work on platforms other than i386, etc. things can be done in-tree. 2002-05-09 01:19:10 -04:00			`sdl: enables sdl, requires devel/sdl`

			`ggi: enables ggi, requires graphics/ggi`

			`debug: enables debugging information`

			`mad: enables mad, requires audio/mad`

Clean up flavors: drop lzo, always use cdda and document those that were missing. ok pvalchev@ 2003-12-04 17:05:09 -05:00			`no_x11: disables gui and most video output.`

			`aa: enables ascii art, requires graphics/aalib`
+no_x11 flavor 2002-06-29 07:51:22 -04:00
Update the USER_LDT blurb to match reality; some feedback from espie@, ok naddy@ 2003-03-30 07:27:55 -05:00			`win32: enables win32 codecs (i386-only) To use this flavor, you`
			`need to enable the machdep.userldt sysctl, either via`
			`/etc/sysctl.conf, or by entering (as root):`
			`sysctl -w machdep.userldt=1`