cpet/openbsd-ports
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6ba86afdcd
openbsd-ports/sysutils/monit/Makefile

40 lines
955 B
Makefile
Raw Normal View History

upgrade to monit 4.2.1 There exists security vulnerabilites in the monit HTTP interface, which could allow an attacker in the worst case to gain root access to the system. This issue only affect monit if monit is started with http server support. From: Robert Nagy <thuglife at bsd dot hu> No response from MAINTAINER.
2004-04-13 04:57:59 -04:00
# $OpenBSD: Makefile,v 1.5 2004/04/13 08:57:59 brad Exp $
Add monit -- monit is an utility for monitoring and managing daemons or similar programs running on a Unix system. It will start specified programs if they are not running and restart programs not responding. It supports MD5 checksums, alert notifications, an http interface among other useful features. brad@ ok
2002-11-29 18:22:21 -05:00
Update monit to version 3.2 -- Main changes: * Monit now reloads configuration ONLY after it receives SIGHUP. Automatic reload based on monit's control file timestamp is now defunct. * New monit command 'reload' is added. If used, it will reinitialize a running monit daemon (send it the SIGHUP signal). * A new monit option '-t' is added. If used, monit will run a syntax check for the control file and exit with the status. * The ssl version for TCPSSL tests can now explicitly be set if auto- detection should fail. (Thanks to Mark Foster for the bugreport) * Added support for LDAPv2 and LDAPv3, and DWP. * Restart method added to monit httpd cervlet * Alert messages in passive mode fixed * Console command "monit restart [service]" in daemon mode fixed * Start/stop/restart race condition fixed. Changelog: http://www.tildeslash.com/monit/changes.html Patches OpenBSD specific submitted to authors.
2003-06-01 19:14:16 -04:00
COMMENT= "monitoring and managing daemons utility"
Add monit -- monit is an utility for monitoring and managing daemons or similar programs running on a Unix system. It will start specified programs if they are not running and restart programs not responding. It supports MD5 checksums, alert notifications, an http interface among other useful features. brad@ ok
2002-11-29 18:22:21 -05:00
upgrade to monit 4.2.1 There exists security vulnerabilites in the monit HTTP interface, which could allow an attacker in the worst case to gain root access to the system. This issue only affect monit if monit is started with http server support. From: Robert Nagy <thuglife at bsd dot hu> No response from MAINTAINER.
2004-04-13 04:57:59 -04:00
VERSION= 4.2.1
Update monit to version 3.2 -- Main changes: * Monit now reloads configuration ONLY after it receives SIGHUP. Automatic reload based on monit's control file timestamp is now defunct. * New monit command 'reload' is added. If used, it will reinitialize a running monit daemon (send it the SIGHUP signal). * A new monit option '-t' is added. If used, monit will run a syntax check for the control file and exit with the status. * The ssl version for TCPSSL tests can now explicitly be set if auto- detection should fail. (Thanks to Mark Foster for the bugreport) * Added support for LDAPv2 and LDAPv3, and DWP. * Restart method added to monit httpd cervlet * Alert messages in passive mode fixed * Console command "monit restart [service]" in daemon mode fixed * Start/stop/restart race condition fixed. Changelog: http://www.tildeslash.com/monit/changes.html Patches OpenBSD specific submitted to authors.
2003-06-01 19:14:16 -04:00
DISTNAME= monit-${VERSION}
CATEGORIES= sysutils
Add monit -- monit is an utility for monitoring and managing daemons or similar programs running on a Unix system. It will start specified programs if they are not running and restart programs not responding. It supports MD5 checksums, alert notifications, an http interface among other useful features. brad@ ok
2002-11-29 18:22:21 -05:00
Update monit to version 3.2 -- Main changes: * Monit now reloads configuration ONLY after it receives SIGHUP. Automatic reload based on monit's control file timestamp is now defunct. * New monit command 'reload' is added. If used, it will reinitialize a running monit daemon (send it the SIGHUP signal). * A new monit option '-t' is added. If used, monit will run a syntax check for the control file and exit with the status. * The ssl version for TCPSSL tests can now explicitly be set if auto- detection should fail. (Thanks to Mark Foster for the bugreport) * Added support for LDAPv2 and LDAPv3, and DWP. * Restart method added to monit httpd cervlet * Alert messages in passive mode fixed * Console command "monit restart [service]" in daemon mode fixed * Start/stop/restart race condition fixed. Changelog: http://www.tildeslash.com/monit/changes.html Patches OpenBSD specific submitted to authors.
2003-06-01 19:14:16 -04:00
HOMEPAGE= http://www.tildeslash.com/monit/
Add monit -- monit is an utility for monitoring and managing daemons or similar programs running on a Unix system. It will start specified programs if they are not running and restart programs not responding. It supports MD5 checksums, alert notifications, an http interface among other useful features. brad@ ok
2002-11-29 18:22:21 -05:00
Update monit to version 3.2 -- Main changes: * Monit now reloads configuration ONLY after it receives SIGHUP. Automatic reload based on monit's control file timestamp is now defunct. * New monit command 'reload' is added. If used, it will reinitialize a running monit daemon (send it the SIGHUP signal). * A new monit option '-t' is added. If used, monit will run a syntax check for the control file and exit with the status. * The ssl version for TCPSSL tests can now explicitly be set if auto- detection should fail. (Thanks to Mark Foster for the bugreport) * Added support for LDAPv2 and LDAPv3, and DWP. * Restart method added to monit httpd cervlet * Alert messages in passive mode fixed * Console command "monit restart [service]" in daemon mode fixed * Start/stop/restart race condition fixed. Changelog: http://www.tildeslash.com/monit/changes.html Patches OpenBSD specific submitted to authors.
2003-06-01 19:14:16 -04:00
MASTER_SITES= ${HOMEPAGE}dist/
Add monit -- monit is an utility for monitoring and managing daemons or similar programs running on a Unix system. It will start specified programs if they are not running and restart programs not responding. It supports MD5 checksums, alert notifications, an http interface among other useful features. brad@ ok
2002-11-29 18:22:21 -05:00
Update monit to version 3.2 -- Main changes: * Monit now reloads configuration ONLY after it receives SIGHUP. Automatic reload based on monit's control file timestamp is now defunct. * New monit command 'reload' is added. If used, it will reinitialize a running monit daemon (send it the SIGHUP signal). * A new monit option '-t' is added. If used, monit will run a syntax check for the control file and exit with the status. * The ssl version for TCPSSL tests can now explicitly be set if auto- detection should fail. (Thanks to Mark Foster for the bugreport) * Added support for LDAPv2 and LDAPv3, and DWP. * Restart method added to monit httpd cervlet * Alert messages in passive mode fixed * Console command "monit restart [service]" in daemon mode fixed * Start/stop/restart race condition fixed. Changelog: http://www.tildeslash.com/monit/changes.html Patches OpenBSD specific submitted to authors.
2003-06-01 19:14:16 -04:00
MAINTAINER= Margarida Sequeira <margarida@openbsd.org>
Add monit -- monit is an utility for monitoring and managing daemons or similar programs running on a Unix system. It will start specified programs if they are not running and restart programs not responding. It supports MD5 checksums, alert notifications, an http interface among other useful features. brad@ ok
2002-11-29 18:22:21 -05:00
# GPL
PERMIT_PACKAGE_CDROM= Yes
PERMIT_PACKAGE_FTP= Yes
PERMIT_DISTFILES_CDROM= Yes
PERMIT_DISTFILES_FTP= Yes
CONFIGURE_STYLE= gnu
Update monit to version 3.2 -- Main changes: * Monit now reloads configuration ONLY after it receives SIGHUP. Automatic reload based on monit's control file timestamp is now defunct. * New monit command 'reload' is added. If used, it will reinitialize a running monit daemon (send it the SIGHUP signal). * A new monit option '-t' is added. If used, monit will run a syntax check for the control file and exit with the status. * The ssl version for TCPSSL tests can now explicitly be set if auto- detection should fail. (Thanks to Mark Foster for the bugreport) * Added support for LDAPv2 and LDAPv3, and DWP. * Restart method added to monit httpd cervlet * Alert messages in passive mode fixed * Console command "monit restart [service]" in daemon mode fixed * Start/stop/restart race condition fixed. Changelog: http://www.tildeslash.com/monit/changes.html Patches OpenBSD specific submitted to authors.
2003-06-01 19:14:16 -04:00
USE_GMAKE= Yes
Add monit -- monit is an utility for monitoring and managing daemons or similar programs running on a Unix system. It will start specified programs if they are not running and restart programs not responding. It supports MD5 checksums, alert notifications, an http interface among other useful features. brad@ ok
2002-11-29 18:22:21 -05:00
Update monit to version 3.2 -- Main changes: * Monit now reloads configuration ONLY after it receives SIGHUP. Automatic reload based on monit's control file timestamp is now defunct. * New monit command 'reload' is added. If used, it will reinitialize a running monit daemon (send it the SIGHUP signal). * A new monit option '-t' is added. If used, monit will run a syntax check for the control file and exit with the status. * The ssl version for TCPSSL tests can now explicitly be set if auto- detection should fail. (Thanks to Mark Foster for the bugreport) * Added support for LDAPv2 and LDAPv3, and DWP. * Restart method added to monit httpd cervlet * Alert messages in passive mode fixed * Console command "monit restart [service]" in daemon mode fixed * Start/stop/restart race condition fixed. Changelog: http://www.tildeslash.com/monit/changes.html Patches OpenBSD specific submitted to authors.
2003-06-01 19:14:16 -04:00
NO_REGRESS= Yes
Add monit -- monit is an utility for monitoring and managing daemons or similar programs running on a Unix system. It will start specified programs if they are not running and restart programs not responding. It supports MD5 checksums, alert notifications, an http interface among other useful features. brad@ ok
2002-11-29 18:22:21 -05:00
post-install:
${INSTALL_DATA_DIR} ${PREFIX}/share/doc/monit
${INSTALL_DATA_DIR} ${PREFIX}/share/examples/monit
Update monit to version 4.1 -- Lots of new features and bugfixes. Changelog at: http://www.tildeslash.com/monit/dist/CHANGES.txt Patches accepted by authors.
2003-11-02 11:12:00 -05:00
cd ${WRKSRC} && ${INSTALL_DATA} FAQ.txt README.SSL UPGRADE.txt \
Update to version 3.1 -- This release optionally makes use of OpenSSL, it is now possible to monitor processes forged with SSL. It is also possible to run monit's HTTP server with SSL. Also added: Timestamp monitoring for files and directories and an SSH protocol test. brad@ ok
2002-12-25 19:45:55 -05:00
${PREFIX}/share/doc/monit
Update monit to version 3.2 -- Main changes: * Monit now reloads configuration ONLY after it receives SIGHUP. Automatic reload based on monit's control file timestamp is now defunct. * New monit command 'reload' is added. If used, it will reinitialize a running monit daemon (send it the SIGHUP signal). * A new monit option '-t' is added. If used, monit will run a syntax check for the control file and exit with the status. * The ssl version for TCPSSL tests can now explicitly be set if auto- detection should fail. (Thanks to Mark Foster for the bugreport) * Added support for LDAPv2 and LDAPv3, and DWP. * Restart method added to monit httpd cervlet * Alert messages in passive mode fixed * Console command "monit restart [service]" in daemon mode fixed * Start/stop/restart race condition fixed. Changelog: http://www.tildeslash.com/monit/changes.html Patches OpenBSD specific submitted to authors.
2003-06-01 19:14:16 -04:00
cd ${WRKSRC}/doc && ${INSTALL_DATA} monit.html examples.html \
Add monit -- monit is an utility for monitoring and managing daemons or similar programs running on a Unix system. It will start specified programs if they are not running and restart programs not responding. It supports MD5 checksums, alert notifications, an http interface among other useful features. brad@ ok
2002-11-29 18:22:21 -05:00
${PREFIX}/share/doc/monit
Update monit to version 4.1 -- Lots of new features and bugfixes. Changelog at: http://www.tildeslash.com/monit/dist/CHANGES.txt Patches accepted by authors.
2003-11-02 11:12:00 -05:00
cd ${WRKSRC}/protocols && ${INSTALL_DATA} NOTES \
${PREFIX}/share/doc/monit
Add monit -- monit is an utility for monitoring and managing daemons or similar programs running on a Unix system. It will start specified programs if they are not running and restart programs not responding. It supports MD5 checksums, alert notifications, an http interface among other useful features. brad@ ok
2002-11-29 18:22:21 -05:00
cd ${WRKSRC} && ${INSTALL_DATA} monitrc \
${PREFIX}/share/examples/monit
.include <bsd.port.mk>
Reference in New Issue Copy Permalink