openbsd-ports/mail/dovecot/patches/patch-dovecot-example_conf

$OpenBSD: patch-dovecot-example_conf,v 1.20 2006/07/16 02:43:08 brad Exp $
--- dovecot-example.conf.orig	Sat Jul  1 16:07:32 2006
+++ dovecot-example.conf	Wed Jul  5 08:41:43 2006
@@ -7,13 +7,12 @@
 # value inside quotes, eg.: key = "# char and trailing whitespace  "
 
 # Default values are shown after each value, it's not required to uncomment
-# any of the lines. Exception to this are paths, they're just examples
-# with real defaults being based on configure options. The paths listed here
-# are for configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var
-# --with-ssldir=/etc/ssl
+# any of the lines.
 
+# *** NOTE *** Some values HAVE been changed for OpenBSD use.
+
 # Base directory where to store runtime data.
-#base_dir = /var/run/dovecot/
+base_dir = /var/dovecot/
 
 # Protocols we want to be serving: imap imaps pop3 pop3s
 #protocols = imap imaps
@@ -41,7 +40,7 @@
 # SSL/TLS is used (LOGINDISABLED capability). Note that if the remote IP
 # matches the local IP (ie. you're connecting from the same computer), the
 # connection is considered secure and plaintext authentication is allowed.
-#disable_plaintext_auth = yes
+disable_plaintext_auth = yes
 
 # Should all IMAP and POP3 processes be killed when Dovecot master process
 # shuts down. Setting this to "no" means that Dovecot can be upgraded without
@@ -86,7 +85,7 @@
 # dropping root privileges, so keep the key file unreadable by anyone but
 # root. Included doc/mkcert.sh can be used to easily generate self-signed
 # certificate, just make sure to update the domains in dovecot-openssl.cnf
-#ssl_cert_file = /etc/ssl/certs/dovecot.pem
+ssl_cert_file = /etc/ssl/dovecotcert.pem
 #ssl_key_file = /etc/ssl/private/dovecot.pem
 
 # If key file is password protected, give the password here. Alternatively
@@ -118,7 +117,7 @@
 # which login needs to be able to connect to. The sockets are created when
 # running as root, so you don't have to worry about permissions. Note that
 # everything in this directory is deleted when Dovecot is started.
-#login_dir = /var/run/dovecot/login
+login_dir = /var/dovecot/login
 
 # chroot login process to the login_dir. Only reason not to do this is if you
 # wish to run the whole Dovecot without roots.
@@ -130,7 +129,7 @@
 # only it has access, it's used to control access for authentication process.
 # Note that this user is NOT used to access mails.
 # http://wiki.dovecot.org/UserIds
-#login_user = dovecot
+login_user = _dovecot
 
 # Set max. process size in megabytes. If you don't use
 # login_process_per_connection you might need to grow this.
@@ -265,7 +264,7 @@
 
 # Don't write() to mmaped files. This is required for some operating systems
 # which use separate caches for them, such as OpenBSD.
-#mmap_no_write = no
+mmap_no_write = yes
 
 # Locking method for index files. Alternatives are fcntl, flock and dotlock.
 # Dotlocking uses some tricks which may create more disk I/O than other locking
@@ -467,19 +466,19 @@
 
 protocol imap {
   # Login executable location.
-  #login_executable = /usr/libexec/dovecot/imap-login
+  #login_executable = /usr/local/libexec/dovecot/imap-login
 
   # IMAP executable location. Changing this allows you to execute other
   # binaries before the imap process is executed.
   #
   # This would write rawlogs into ~/dovecot.rawlog/ directory:
-  #   mail_executable = /usr/libexec/dovecot/rawlog /usr/libexec/dovecot/imap
+  #   mail_executable = /usr/local/libexec/dovecot/rawlog /usr/local/libexec/dovecot/imap
   #
   # This would attach gdb into the imap process and write backtraces into
   # /tmp/gdbhelper.* files:
-  #   mail_executable = /usr/libexec/dovecot/gdbhelper /usr/libexec/dovecot/imap
+  #   mail_executable = /usr/local/libexec/dovecot/gdbhelper /usr/local/libexec/dovecot/imap
   #
-  #mail_executable = /usr/libexec/dovecot/imap
+  #mail_executable = /usr/local/libexec/dovecot/imap
 
   # Maximum IMAP command line length in bytes. Some clients generate very long
   # command lines with huge mailboxes, so you may need to raise this if you get
@@ -520,7 +519,7 @@ protocol imap {
   #     but not both. Thunderbird separates these two by forcing server to
   #     accept '/' suffix in mailbox names in subscriptions list.
   # The list is space-separated.
-  #imap_client_workarounds = outlook-idle
+  imap_client_workarounds = delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep
 }
   
 ##
@@ -529,10 +528,10 @@ protocol imap {
 
 protocol pop3 {
   # Login executable location.
-  #login_executable = /usr/libexec/dovecot/pop3-login
+  #login_executable = /usr/local/libexec/dovecot/pop3-login
 
   # POP3 executable location
-  #mail_executable = /usr/libexec/dovecot/pop3
+  #mail_executable = /usr/local/libexec/dovecot/pop3
 
   # Don't try to set mails non-recent or seen with POP3 sessions. This is
   # mostly intended to reduce disk I/O. With maildir it doesn't move files
@@ -576,7 +575,7 @@ protocol pop3 {
   # installations. %08Xu%08Xv will be the new default, so use it for new
   # installations.
   #
-  #pop3_uidl_format = 
+  pop3_uidl_format = %08Xu%08Xv
 
   # POP3 logout format string:
   #  %t - number of TOP commands
@@ -601,7 +600,7 @@ protocol pop3 {
   #     Outlook Express and Netscape Mail breaks if end of headers-line is
   #     missing. This option simply sends it if it's missing.
   # The list is space-separated.
-  #pop3_client_workarounds = 
+  pop3_client_workarounds = outlook-no-nuls oe-ns-eoh
 }
 
 ##
@@ -633,7 +632,7 @@ protocol lda {
 ##
 
 # Executable location
-#auth_executable = /usr/libexec/dovecot/dovecot-auth
+#auth_executable = /usr/local/libexec/dovecot/dovecot-auth
 
 # Set max. process size in megabytes.
 #auth_process_size = 256
@@ -745,7 +744,7 @@ auth default {
   # database (passwd usually), you can use static userdb.
   # REMEMBER: You'll need /etc/pam.d/dovecot file created for PAM
   # authentication to actually work.
-  passdb pam {
+  #passdb pam {
     #  [session=yes] [setcred=yes] [cache_key=<key>] [<service name>]
     #
     # session=yes makes Dovecot open and immediately close PAM session. Some
@@ -773,13 +772,13 @@ auth default {
     #   args = session=yes *
     #   args = cache_key=%u dovecot
     #args = dovecot
-  }
+  #}
 
   # /etc/passwd or similar, using getpwnam()
   # In many systems nowadays this uses Name Service Switch, which is
   # configured in /etc/nsswitch.conf.
-  #passdb passwd {
-  #}
+  passdb passwd {
+  }
 
   # /etc/shadow or similiar, using getspnam(). Deprecated by PAM nowadays.
   #passdb shadow {