cpet/openbsd-ports
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
12eb57b215
openbsd-ports/net/kismet/patches/patch-Makefile_in

277 lines
12 KiB
Plaintext
Raw Normal View History

Update to 2006-04-R1, with some patches from the upstream kismet SVN. While here, update my mail address and comment most of the patch files. Some WANTLIB spanking and ok, sturm@
2006-11-01 16:13:19 -05:00
$OpenBSD: patch-Makefile_in,v 1.3 2006/11/01 21:13:19 kili Exp $
# Partially from upstream SVN, especially the PCAPLNK stuff, but also
# some other blurb.
# Use BSD_INSTALL_* macros for installation.
--- Makefile.in.orig Thu Apr 13 00:49:15 2006
+++ Makefile.in Fri Oct 20 15:27:49 2006
@@ -10,12 +10,10 @@ INSTUSR ?= "root"
ZAURUS = @zaurus@
-PCAPDIR = @pcapdir@
-PCAPLIB = @pcaplib@
-PCAPLNK = @pcaplnk@
-
THREADL = @threadlib@
+PCAPLNK = @pcaplnk@
+
HOME = @srcdir@
CXX = @CXX@
CC = @CC@
@@ -23,8 +21,8 @@ LD = @CXX@
Import of kismet-2005-07-R1a. Kismet is an 802.11 layer2 wireless network detector, sniffer, and intrusion detection system. Kismet will work with any wireless card which supports raw monitoring (rfmon) mode, and can sniff 802.11b, 802.11a, and 802.11g traffic. Kismet identifies networks by passively collecting packets and detecting standard named networks, detecting (and given time, decloaking) hidden networks, and infering the presence of nonbeaconing networks via data traffic. from Matthias Kilian <kili@outback.escape.de> and from a lot of other people.
2005-07-27 17:37:26 -04:00
LDFLAGS = @LDFLAGS@
LIBS = @LIBS@
CLIBS = @CLIBS@
-CFLAGS = @CPPFLAGS@
-CXXFLAGS = -O2 -Wall -DVERSION_MAJOR=\"$(VERSION_MAJOR)\" -DVERSION_MINOR=\"$(VERSION_MINOR)\" -DVERSION_TINY=\"$(VERSION_TINY)\" -DTIMESTAMP=\"`cat TIMESTAMP`\" @CXXFLAGS@
+CFLAGS = @CFLAGS@
+CXXFLAGS = -DVERSION_MAJOR=\"$(VERSION_MAJOR)\" -DVERSION_MINOR=\"$(VERSION_MINOR)\" -DVERSION_TINY=\"$(VERSION_TINY)\" -DTIMESTAMP=\"`cat TIMESTAMP`\" @CXXFLAGS@
CPPFLAGS = @CPPFLAGS@
SUID = @suid@
Update to 2006-04-R1, with some patches from the upstream kismet SVN. While here, update my mail address and comment most of the patch files. Some WANTLIB spanking and ok, sturm@
2006-11-01 16:13:19 -05:00
@@ -72,15 +70,15 @@ BUZZER = extra/buzzme/buzzme
GPSLBUILD=@gpslc@
GPSLBUILDO=@gpslco@
-ZAURUSBUILD=@zbuild@
+#ZAURUSBUILD=@zbuild@
all: Makefile $(DEPEND) $(PS) $(DRONE) $(NC) $(GPSLBUILD) $(ZAURUSBUILD)
-$(PS): $(PSO) $(PCAPLIB)
- $(LD) $(LDFLAGS) -o $(PS) $(PSO) $(PCAPLIB) $(LIBS) $(PCAPLNK)
+$(PS): $(PSO)
+ $(LD) $(LDFLAGS) -o $(PS) $(PSO) $(LIBS) $(PCAPLNK)
-$(DRONE): $(DRONEO) $(PCAPLIB)
- $(LD) $(LDFLAGS) -o $(DRONE) $(DRONEO) $(PCAPLIB) $(LIBS) $(PCAPLNK)
+$(DRONE): $(DRONEO)
+ $(LD) $(LDFLAGS) -o $(DRONE) $(DRONEO) $(LIBS) $(PCAPLNK)
$(NC): $(NCO)
$(LD) $(LDFLAGS) -o $(NC) $(NCO) $(LIBS) $(CLIBS)
@@ -99,9 +97,6 @@ $(GPSL): $(GPSLBUILDO)
$(BUZZER):
@( cd extra/buzzme; $(MAKE); ) ;
-$(PCAPDIR)/libpcap.a:
- @( cd $(PCAPDIR); $(MAKE); )
-
Makefile: Makefile.in configure
@-echo "'Makefile.in' or 'configure' are more current than this Makefile. You should re-run 'configure'."
@@ -130,52 +125,52 @@ checkuiconfig:
Import of kismet-2005-07-R1a. Kismet is an 802.11 layer2 wireless network detector, sniffer, and intrusion detection system. Kismet will work with any wireless card which supports raw monitoring (rfmon) mode, and can sniff 802.11b, 802.11a, and 802.11g traffic. Kismet identifies networks by passively collecting packets and detecting standard named networks, detecting (and given time, decloaking) hidden networks, and infering the presence of nonbeaconing networks via data traffic. from Matthias Kilian <kili@outback.escape.de> and from a lot of other people.
2005-07-27 17:37:26 -04:00
fi
binuserinstall:
- install -o $(INSTUSR) -g $(INSTGRP) -s -m 755 $(PS) $(BIN)/$(PS);
- install -o $(INSTUSR) -g $(INSTGRP) -s -m 755 $(DRONE) $(BIN)/$(DRONE);
+ $(BSD_INSTALL_PROGRAM) $(PS) $(BIN)/$(PS);
+ $(BSD_INSTALL_PROGRAM) $(DRONE) $(BIN)/$(DRONE);
binsuidinstall:
- install -o $(INSTUSR) -g $(INSTGRP) -s -m 4755 $(PS) $(BIN)/$(PS);
- install -o $(INSTUSR) -g $(INSTGRP) -s -m 4755 $(DRONE) $(BIN)/$(DRONE);
+ $(BSD_INSTALL_PROGRAM) -m 4755 $(PS) $(BIN)/$(PS);
+ $(BSD_INSTALL_PROGRAM) -m 4755 $(DRONE) $(BIN)/$(DRONE);
commoninstall:
- mkdir -p $(ETC)
- mkdir -p $(BIN)
+ $(BSD_INSTALL_DATA_DIR) $(ETC)
+ $(BSD_INSTALL_PROGRAM_DIR) $(BIN)
- install -o $(INSTUSR) -g $(INSTGRP) -m 755 scripts/kismet $(BIN)/kismet
- install -o $(INSTUSR) -g $(INSTGRP) -s -m 755 $(NC) $(BIN)/$(NC)
- # install -o $(INSTUSR) -g $(INSTGRP) -s -m 755 $(HOPPER) $(BIN)/$(HOPPER)
+ $(BSD_INSTALL_SCRIPT) scripts/kismet $(BIN)/kismet
+ $(BSD_INSTALL_PROGRAM) $(NC) $(BIN)/$(NC)
+ # $(BSD_INSTALL_PROGRAM) $(HOPPER) $(BIN)/$(HOPPER)
@if test "$(ZAURUS)" = "yes"; then \
- install -o $(INSTUSR) -g $(INSTGRP) -s -m 755 $(BUZZER) $(BIN)/buzzme; \
- echo install -o $(INSTUSR) -g $(INSTGRP) -s -m 755 $(BUZZER) $(BIN)/buzzme; \
+ $(BSD_INSTALL_PROGRAM) $(BUZZER) $(BIN)/buzzme; \
+ echo $(BSD_INSTALL_PROGRAM) $(BUZZER) $(BIN)/buzzme; \
fi
-#install -o $(INSTUSR) -g $(INSTGRP) -m 755 scripts/kismet_monitor $(BIN)/kismet_monitor
-#install -o $(INSTUSR) -g $(INSTGRP) -m 755 scripts/kismet_unmonitor $(BIN)/kismet_unmonitor
- mkdir -p $(MAN)/man1
- install -o $(INSTUSR) -g $(MANGRP) -m 644 man/kismet.1 $(MAN)/man1/kismet.1
- # install -o $(INSTUSR) -g $(MANGRP) -m 644 man/kismet_monitor.1 $(MAN)/man1/kismet_monitor.1
- # install -o $(INSTUSR) -g $(MANGRP) -m 644 man/kismet_hopper.1 $(MAN)/man1/kismet_hopper.1
- install -o $(INSTUSR) -g $(MANGRP) -m 644 man/kismet_drone.1 $(MAN)/man1/kismet_drone.1
- mkdir -p $(MAN)/man5
- install -o $(INSTUSR) -g $(MANGRP) -m 644 man/kismet.conf.5 $(MAN)/man5/kismet.conf.5
- install -o $(INSTUSR) -g $(MANGRP) -m 644 man/kismet_ui.conf.5 $(MAN)/man5/kismet_ui.conf.5
- install -o $(INSTUSR) -g $(MANGRP) -m 644 man/kismet_drone.conf.5 $(MAN)/man5/kismet_drone.conf.5
+#$(BSD_INSTALL_SCRIPT) scripts/kismet_monitor $(BIN)/kismet_monitor
+#$(BSD_INSTALL_SCRIPT) scripts/kismet_unmonitor $(BIN)/kismet_unmonitor
+ $(BSD_INSTALL_MAN_DIR) $(MAN)/man1
+ $(BSD_INSTALL_MAN) man/kismet.1 $(MAN)/man1/kismet.1
+ # $(BSD_INSTALL_MAN) man/kismet_monitor.1 $(MAN)/man1/kismet_monitor.1
+ # $(BSD_INSTALL_MAN) man/kismet_hopper.1 $(MAN)/man1/kismet_hopper.1
+ $(BSD_INSTALL_MAN) man/kismet_drone.1 $(MAN)/man1/kismet_drone.1
+ $(BSD_INSTALL_MAN_DIR) $(MAN)/man5
+ $(BSD_INSTALL_MAN) man/kismet.conf.5 $(MAN)/man5/kismet.conf.5
+ $(BSD_INSTALL_MAN) man/kismet_ui.conf.5 $(MAN)/man5/kismet_ui.conf.5
+ $(BSD_INSTALL_MAN) man/kismet_drone.conf.5 $(MAN)/man5/kismet_drone.conf.5
@if test "$(GPSLBUILD)" = "$(GPSL)"; then \
- install -o $(INSTUSR) -g $(INSTGRP) -s -m 755 $(GPSL) $(BIN)/$(GPSL); \
- echo install -o $(INSTUSR) -g $(INSTGRP) -s -m 755 $(GPSL) $(BIN)/$(GPSL); \
- install -o $(INSTUSR) -g $(INSTGRP) -m 755 scripts/gpsmap-helper-earthamaps $(BIN)/gpsmap-helper-earthamaps; \
- echo install -o $(INSTUSR) -g $(INSTGRP) -m 755 scripts/gpsmap-helper-earthamaps $(BIN)/gpsmap-helper-earthamaps; \
- install -o $(INSTUSR) -g $(MANGRP) -m 644 man/gpsmap.1 $(MAN)/man1/gpsmap.1; \
- echo install -o $(INSTUSR) -g $(MANGRP) -m 644 man/gpsmap.1 $(MAN)/man1/gpsmap.1; \
+ $(BSD_INSTALL_PROGRAM) $(GPSL) $(BIN)/$(GPSL); \
+ echo $(BSD_INSTALL_PROGRAM) $(GPSL) $(BIN)/$(GPSL); \
+ $(BSD_INSTALL_SCRIPT) scripts/gpsmap-helper-earthamaps $(BIN)/gpsmap-helper-earthamaps; \
+ echo $(BSD_INSTALL_SCRIPT) scripts/gpsmap-helper-earthamaps $(BIN)/gpsmap-helper-earthamaps; \
+ $(BSD_INSTALL_MAN) man/gpsmap.1 $(MAN)/man1/gpsmap.1; \
+ echo $(BSD_INSTALL_MAN) man/gpsmap.1 $(MAN)/man1/gpsmap.1; \
fi
- mkdir -p $(WAV)
- install -o $(INSTUSR) -g $(INSTGRP) -m 644 wav/new_network.wav $(WAV)/new_network.wav
- install -o $(INSTUSR) -g $(INSTGRP) -m 644 wav/traffic.wav $(WAV)/traffic.wav
- install -o $(INSTUSR) -g $(INSTGRP) -m 644 wav/junk_traffic.wav $(WAV)/junk_traffic.wav
- install -o $(INSTUSR) -g $(INSTGRP) -m 644 wav/alert.wav $(WAV)/alert.wav
- install -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/ap_manuf $(ETC)/ap_manuf;
- install -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/client_manuf $(ETC)/client_manuf;
+ $(BSD_INSTALL_DATA_DIR) $(WAV)
+ $(BSD_INSTALL_DATA) wav/new_network.wav $(WAV)/new_network.wav
+ $(BSD_INSTALL_DATA) wav/traffic.wav $(WAV)/traffic.wav
+ $(BSD_INSTALL_DATA) wav/junk_traffic.wav $(WAV)/junk_traffic.wav
+ $(BSD_INSTALL_DATA) wav/alert.wav $(WAV)/alert.wav
+ $(BSD_INSTALL_DATA) conf/ap_manuf $(ETC)/ap_manuf;
+ $(BSD_INSTALL_DATA) conf/client_manuf $(ETC)/client_manuf;
@if test -f $(BIN)/kismet_curses; then \
echo "Removing old kismet_curses binary. The panels frontend is now kismet_client."; \
Update to 2006-04-R1, with some patches from the upstream kismet SVN. While here, update my mail address and comment most of the patch files. Some WANTLIB spanking and ok, sturm@
2006-11-01 16:13:19 -05:00
@@ -188,22 +183,22 @@ suidinstall: $(PS) $(DRONE) $(NC) $(GPSL
Import of kismet-2005-07-R1a. Kismet is an 802.11 layer2 wireless network detector, sniffer, and intrusion detection system. Kismet will work with any wireless card which supports raw monitoring (rfmon) mode, and can sniff 802.11b, 802.11a, and 802.11g traffic. Kismet identifies networks by passively collecting packets and detecting standard named networks, detecting (and given time, decloaking) hidden networks, and infering the presence of nonbeaconing networks via data traffic. from Matthias Kilian <kili@outback.escape.de> and from a lot of other people.
2005-07-27 17:37:26 -04:00
@if test -f $(ETC)/kismet.conf; then \
$(MAKE) -e checkconfig; \
else \
- install -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/kismet.conf $(ETC)/kismet.conf; \
- echo install -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/kismet.conf $(ETC)/kismet.conf; \
+ $(BSD_INSTALL_DATA) conf/kismet.conf $(ETC)/kismet.conf; \
+ echo $(BSD_INSTALL_DATA) conf/kismet.conf $(ETC)/kismet.conf; \
echo "Installed config into $(ETC)/kismet.conf."; \
fi
@if test -f $(ETC)/kismet_drone.conf; then \
$(MAKE) -e checkdroneconfig; \
else \
- install -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/kismet_drone.conf $(ETC)/kismet_drone.conf; \
- echo install -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/kismet_drone.conf $(ETC)/kismet_drone.conf; \
+ $(BSD_INSTALL_DATA) conf/kismet_drone.conf $(ETC)/kismet_drone.conf; \
+ echo $(BSD_INSTALL_DATA) conf/kismet_drone.conf $(ETC)/kismet_drone.conf; \
echo "Installed drone config into $(ETC)/kismet_drone.conf."; \
fi
@if test -f $(ETC)/kismet_ui.conf; then \
$(MAKE) -e checkuiconfig; \
else \
- install -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/kismet_ui.conf $(ETC)/kismet_ui.conf; \
- echo install -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/kismet_ui.conf $(ETC)/kismet_ui.conf; \
+ $(BSD_INSTALL_DATA) conf/kismet_ui.conf $(ETC)/kismet_ui.conf; \
+ echo $(BSD_INSTALL_DATA) conf/kismet_ui.conf $(ETC)/kismet_ui.conf; \
echo "Installed UI config into $(ETC)/kismet_ui.conf."; \
fi
@echo "Installed kismet into $(BIN)/."
Update to 2006-04-R1, with some patches from the upstream kismet SVN. While here, update my mail address and comment most of the patch files. Some WANTLIB spanking and ok, sturm@
2006-11-01 16:13:19 -05:00
@@ -221,22 +216,22 @@ install: $(PS) $(DRONE) $(NC) $(GPSLBUIL
Import of kismet-2005-07-R1a. Kismet is an 802.11 layer2 wireless network detector, sniffer, and intrusion detection system. Kismet will work with any wireless card which supports raw monitoring (rfmon) mode, and can sniff 802.11b, 802.11a, and 802.11g traffic. Kismet identifies networks by passively collecting packets and detecting standard named networks, detecting (and given time, decloaking) hidden networks, and infering the presence of nonbeaconing networks via data traffic. from Matthias Kilian <kili@outback.escape.de> and from a lot of other people.
2005-07-27 17:37:26 -04:00
@if test -f $(ETC)/kismet.conf; then \
$(MAKE) -e checkconfig; \
else \
- install -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/kismet.conf $(ETC)/kismet.conf; \
- echo install -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/kismet.conf $(ETC)/kismet.conf; \
+ $(BSD_INSTALL_DATA) conf/kismet.conf $(ETC)/kismet.conf; \
+ echo $(BSD_INSTALL_DATA) conf/kismet.conf $(ETC)/kismet.conf; \
echo "Installed config into $(ETC)/kismet.conf."; \
fi
@if test -f $(ETC)/kismet_drone.conf; then \
$(MAKE) -e checkdroneconfig; \
else \
- install -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/kismet_drone.conf $(ETC)/kismet_drone.conf; \
- echo install -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/kismet_drone.conf $(ETC)/kismet_drone.conf; \
+ $(BSD_INSTALL_DATA) conf/kismet_drone.conf $(ETC)/kismet_drone.conf; \
+ echo $(BSD_INSTALL_DATA) conf/kismet_drone.conf $(ETC)/kismet_drone.conf; \
echo "Installed drone config into $(ETC)/kismet_drone.conf."; \
fi
@if test -f $(ETC)/kismet_ui.conf; then \
$(MAKE) -e checkuiconfig; \
else \
- install -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/kismet_ui.conf $(ETC)/kismet_ui.conf; \
- echo install -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/kismet_ui.conf $(ETC)/kismet_ui.conf; \
+ $(BSD_INSTALL_DATA) conf/kismet_ui.conf $(ETC)/kismet_ui.conf; \
+ echo $(BSD_INSTALL_DATA) conf/kismet_ui.conf $(ETC)/kismet_ui.conf; \
echo "Installed UI config into $(ETC)/kismet_ui.conf."; \
fi
@echo "Installed kismet into $(BIN)/."
Update to 2006-04-R1, with some patches from the upstream kismet SVN. While here, update my mail address and comment most of the patch files. Some WANTLIB spanking and ok, sturm@
2006-11-01 16:13:19 -05:00
@@ -252,11 +247,11 @@ install: $(PS) $(DRONE) $(NC) $(GPSLBUIL
Import of kismet-2005-07-R1a. Kismet is an 802.11 layer2 wireless network detector, sniffer, and intrusion detection system. Kismet will work with any wireless card which supports raw monitoring (rfmon) mode, and can sniff 802.11b, 802.11a, and 802.11g traffic. Kismet identifies networks by passively collecting packets and detecting standard named networks, detecting (and given time, decloaking) hidden networks, and infering the presence of nonbeaconing networks via data traffic. from Matthias Kilian <kili@outback.escape.de> and from a lot of other people.
2005-07-27 17:37:26 -04:00
forceinstall: $(PS)
$(MAKE) -e commoninstall
$(MAKE) -e binuserinstall
- install -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/kismet.conf $(ETC)/kismet.conf; \
+ $(BSD_INSTALL_DATA) conf/kismet.conf $(ETC)/kismet.conf; \
echo "Installed config into $(ETC)/kismet.conf.";
- install -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/kismet_drone.conf $(ETC)/kismet_drone.conf; \
+ $(BSD_INSTALL_DATA) conf/kismet_drone.conf $(ETC)/kismet_drone.conf; \
echo "Installed drone config into $(ETC)/kismet_drone.conf.";
- install -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/kismet_ui.conf $(ETC)/kismet_ui.conf; \
+ $(BSD_INSTALL_DATA) conf/kismet_ui.conf $(ETC)/kismet_ui.conf; \
echo "Installed UI config into $(ETC)/kismet_ui.conf.";
@echo "Installed kismet into $(BIN)/."
@echo "If you have not done so already, read the README file and the FAQ file. Additional"
Update to 2006-04-R1, with some patches from the upstream kismet SVN. While here, update my mail address and comment most of the patch files. Some WANTLIB spanking and ok, sturm@
2006-11-01 16:13:19 -05:00
@@ -271,11 +266,11 @@ forceinstall: $(PS)
Import of kismet-2005-07-R1a. Kismet is an 802.11 layer2 wireless network detector, sniffer, and intrusion detection system. Kismet will work with any wireless card which supports raw monitoring (rfmon) mode, and can sniff 802.11b, 802.11a, and 802.11g traffic. Kismet identifies networks by passively collecting packets and detecting standard named networks, detecting (and given time, decloaking) hidden networks, and infering the presence of nonbeaconing networks via data traffic. from Matthias Kilian <kili@outback.escape.de> and from a lot of other people.
2005-07-27 17:37:26 -04:00
suidforceinstall: $(PS)
$(MAKE) -e commoninstall
$(MAKE) -e binsuidinstall
- install -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/kismet.conf $(ETC)/kismet.conf; \
+ $(BSD_INSTALL_DATA) conf/kismet.conf $(ETC)/kismet.conf; \
echo "Installed config into $(ETC)/kismet.conf.";
- install -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/kismet_drone.conf $(ETC)/kismet_drone.conf; \
+ $(BSD_INSTALL_DATA) conf/kismet_drone.conf $(ETC)/kismet_drone.conf; \
echo "Installed drone config into $(ETC)/kismet_drone.conf.";
- install -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/kismet_ui.conf $(ETC)/kismet_ui.conf; \
+ $(BSD_INSTALL_DATA) conf/kismet_ui.conf $(ETC)/kismet_ui.conf; \
echo "Installed UI config into $(ETC)/kismet_ui.conf.";
@echo "Installed kismet into $(BIN)/."
@echo "If you have not done so already, read the README file and the FAQ file. Additional"
Update to 2006-04-R1, with some patches from the upstream kismet SVN. While here, update my mail address and comment most of the patch files. Some WANTLIB spanking and ok, sturm@
2006-11-01 16:13:19 -05:00
@@ -298,8 +293,7 @@ clean:
@-rm -f $(NC)
@-rm -f $(GPSL)
# @-rm -f $(HOPPER)
- @-( cd extra/buzzme; $(MAKE) clean )
- @-( cd $(PCAPDIR); $(MAKE) clean )
+ # @-( cd extra/buzzme; $(MAKE) clean )
distclean:
@-$(MAKE) clean
@@ -315,8 +309,7 @@ distclean:
#@-rm -f scripts/kismet_monitor
#@-rm -f scripts/kismet_unmonitor
@-( cd extra/; $(MAKE) distclean )
- @-( cd extra/buzzme; $(MAKE) distclean )
- @-( cd $(PCAPDIR); $(MAKE) distclean )
+ # @-( cd extra/buzzme; $(MAKE) distclean )
@-rm -f Makefile
arm: $(PS) $(NC) $(ZBUILD)
@@ -362,13 +355,11 @@ depend:
Import of kismet-2005-07-R1a. Kismet is an 802.11 layer2 wireless network detector, sniffer, and intrusion detection system. Kismet will work with any wireless card which supports raw monitoring (rfmon) mode, and can sniff 802.11b, 802.11a, and 802.11g traffic. Kismet identifies networks by passively collecting packets and detecting standard named networks, detecting (and given time, decloaking) hidden networks, and infering the presence of nonbeaconing networks via data traffic. from Matthias Kilian <kili@outback.escape.de> and from a lot of other people.
2005-07-27 17:37:26 -04:00
@$(MAKE) $(DEPEND)
$(DEPEND):
- @-rm -f $(DEPEND)
+ @rm -f $(DEPEND)
@echo "Generating dependencies... "
@echo > $(DEPEND)
@$(CXX) $(CFLAGS) -MM \
`echo $(PSO) $(DRONEO) $(GPSLO) $(NCO) | sed -e "s/\.o/\.cc/g"` >> $(DEPEND)
-
-include $(DEPEND)
.c.o: $(DEPEND)
$(CC) $(CFLAGS) -c $*.c -o $@
Reference in New Issue Copy Permalink