cpet/freebsd-ports
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
fdd05f7435
freebsd-ports/www/squid31/Makefile
Martin Wilke bdadb07e54 - Update to 3.0.STABLE13 
PR:		131431
Submitted by:	Thomas-Martin Seck <tmseck@web.de> (maintainer)
Security:	http://www.vuxml.org/freebsd/9c2460a4-f6b1-11dd-94d9-0030843d3802.html
2009-02-09 14:22:07 +00:00

445 lines
16 KiB
Makefile
Raw Blame History

# New ports collection makefile for: squid24
# Date created: Tue Mar 27 14:56:08 CEST 2001
# Whom: Adrian Chadd <adrian@FreeBSD.org>
#
# $FreeBSD$
#
# Tunables not (yet) configurable via 'make config':
# SQUID_{U,G}ID
# Which user/group Squid should run as (default: squid/squid).
# The user and group will be created if they do not already exist using
# a uid:gid of 100:100.
# NOTE: older versions of Squid defaulted to nobody/nogroup.
# If you wish to run Squid as "nobody" (which is not recommended), please
# define SQUID_UID=nobody and SQUID_GID=nogroup in your make environment
# before you start the update or installation of this port.
#
# SQUID_LANGUAGES
# A list of languages for which error page files should be installed
# (default: all available)
#
# E.g. use `make SQUID_LANGUAGES="English French"' if you want to
# install the files for these languages only.
# Use `make -VSQUID_LANGUAGES' or scroll down to this variable's
# definition to see which values are valid.
#
# SQUID_DEFAULT_LANG
# If you define SQUID_LANGUAGES, select which language should be the default
# one (this variable defaults to "templates"). This setting can be overwritten
# with squid.conf's error_directory directive.
#
# SQUID_CONFIGURE_ARGS
# Additional configuration options.
#
# To enable them, use e.g
# `make SQUID_CONFIGURE_ARGS="--enable-dlmalloc --enable-truncate" install'
#
# The list below may be incomplete, please see the configure script
# in the Squid source distribution for the complete list of additional
# options.
# Note that you probably do not need to worry about these options in most
# cases, they are included in case you want to experiment with them.
#
# --enable-xmalloc-statistics
# Show malloc statistics in status page
# --enable-cachemgr-hostname=some.hostname
# Make cachemgr.cgi default to this host
# --disable-unlinkd
# Do not use "unlinkd"
# --with-aufs-threads=N_THREADS
# Tune the number of worker threads for the aufs object
# --with-filedescriptors=N
# Force Squid to use N filedescriptors.
# --enable-ntlm-fail-open
# Enable NTLM fail open, where a helper that fails one of the
# Authentication steps can allow Squid to still authenticate the user
# --enable-x-accelerator-vary
# Enable support for the X-Accelerator-Vary HTTP header. Can be used
# to indicate variance within an accelerator setup. Typically used
# together with other code that adds custom HTTP headers to the
# requests.
PORTNAME= squid
PORTVERSION= 3.0.${SQUID_STABLE_VER}
CATEGORIES= www
MASTER_SITES= ftp://ftp.squid-cache.org/pub/%SUBDIR%/ \
ftp://mirrors.24-7-solutions.net/pub/squid/%SUBDIR%/ \
ftp://ftp.belnet.be/packages/squid/pub/%SUBDIR%/ \
ftp://ftp.nl.uu.net/pub/unix/www/squid/%SUBDIR%/ \
ftp://ftp.mirrorservice.org/sites/ftp.squid-cache.org/pub/%SUBDIR%/ \
ftp://ftp.ntua.gr/pub/www/Squid/%SUBDIR%/ \
ftp://ftp.ccs.neu.edu/pub/mirrors/squid.nlanr.net/pub/%SUBDIR%/ \
${MASTER_SITE_RINGSERVER:S,%SUBDIR%,net/www/squid/&,} \
http://www.squid-cache.org/Versions/v3/3.0/ \
http://www3.us.squid-cache.org/Versions/v3/3.0/ \
http://www1.at.squid-cache.org/Versions/v3/3.0/ \
http://www2.nl.squid-cache.org/Versions/v3/3.0/ \
http://www1.ru.squid-cache.org/Versions/v3/3.0/ \
http://www1.uk.squid-cache.org/Versions/v3/3.0/ \
http://www1.jp.squid-cache.org/Versions/v3/3.0/ \
http://www2.tw.squid-cache.org/Versions/v3/3.0/
MASTER_SITE_SUBDIR= squid-3/STABLE
DISTNAME= squid-3.0.STABLE${SQUID_STABLE_VER}
DIST_SUBDIR= squid3.0
PATCH_SITES= http://www.squid-cache.org/%SUBDIR%/ \
http://www2.us.squid-cache.org/%SUBDIR%/ \
http://www3.us.squid-cache.org/%SUBDIR%/ \
http://www1.at.squid-cache.org/%SUBDIR%/ \
http://www2.nl.squid-cache.org/%SUBDIR%/ \
http://www1.ru.squid-cache.org/%SUBDIR%/ \
http://www1.uk.squid-cache.org/%SUBDIR%/ \
http://www1.jp.squid-cache.org/%SUBDIR%/ \
http://www1.tw.squid-cache.org/%SUBDIR%/
PATCH_SITE_SUBDIR= Versions/v3/3.0/changesets
PATCHFILES=
MAINTAINER= tmseck@web.de
COMMENT= HTTP Caching Proxy
LATEST_LINK= squid30
SQUID_STABLE_VER= 13
CONFLICTS= squid-2.[0-9].* cacheboy-[0-9]*
GNU_CONFIGURE= yes
USE_BZIP2= yes
USE_PERL5= yes
USE_RC_SUBR= squid
SQUID_UID?= squid
SQUID_GID?= squid
MAN8= cachemgr.cgi.8 squid.8 squid_radius_auth.8
docs= QUICKSTART README RELEASENOTES.html doc/debug-sections.txt
PORTDOCS= ${docs:T}
PORTEXAMPLES= *
SUB_FILES+= pkg-deinstall pkg-install pkg-message
SUB_LIST+= SQUID_UID=${SQUID_UID} SQUID_GID=${SQUID_GID}
OPTIONS= SQUID_LDAP_AUTH "Install LDAP authentication helpers" off \
SQUID_SASL_AUTH "Install SASL authentication helpers" off \
SQUID_DELAY_POOLS "Enable delay pools" off \
SQUID_SNMP "Enable SNMP support" on \
SQUID_CARP "Enable CARP support" on \
SQUID_SSL "Enable SSL support for reverse proxies" off \
SQUID_PINGER "Install the icmp helper" off \
SQUID_DNS_HELPER "Use the old 'dnsserver' helper" off \
SQUID_HTCP "Enable HTCP support" off \
SQUID_VIA_DB "Enable forward/via database" off \
SQUID_CACHE_DIGESTS "Enable cache digests" off \
SQUID_WCCP "Enable Web Cache Coordination Prot. v1" on \
SQUID_WCCPV2 "Enable Web Cache Coordination Prot. v2" off \
SQUID_STRICT_HTTP "Be strictly HTTP compliant" off \
SQUID_IDENT "Enable ident (RFC 931) lookups" on \
SQUID_REFERER_LOG "Enable Referer-header logging" off \
SQUID_USERAGENT_LOG "Enable User-Agent-header logging" off \
SQUID_ARP_ACL "Enable ACLs based on ethernet address" off \
SQUID_IPFW "Enable transparent proxying with IPFW" off \
SQUID_PF "Enable transparent proxying with PF" off \
SQUID_IPFILTER "Enable transp. proxying with IPFilter" off \
SQUID_ICAP "Enable ICAP client functionality" off \
SQUID_ESI "Enable ESI support (experimental)" off \
SQUID_AUFS "Enable the aufs storage scheme" off \
SQUID_COSS "Enable COSS (currently not available)" off \
SQUID_KQUEUE "Use kqueue(2) (experimental)" on \
SQUID_LARGEFILE "Support log and cache files >2GB" off \
SQUID_STACKTRACES "Create backtraces on fatal errors" off \
SQUID_DEBUG "Enable debugging options" off
etc_files= squid/cachemgr.conf.default \
squid/mib.txt squid/mime.conf.default \
squid/msntauth.conf.default squid/squid.conf.default
icon_files= anthony-binhex.gif anthony-bomb.gif anthony-box.gif \
anthony-box2.gif anthony-c.gif anthony-compressed.gif \
anthony-dir.gif anthony-dirup.gif anthony-dvi.gif \
anthony-f.gif anthony-image.gif anthony-image2.gif \
anthony-layout.gif anthony-link.gif anthony-movie.gif \
anthony-pdf.gif anthony-portal.gif anthony-ps.gif \
anthony-quill.gif anthony-script.gif anthony-sound.gif \
anthony-tar.gif anthony-tex.gif anthony-text.gif \
anthony-unknown.gif anthony-xbm.gif anthony-xpm.gif
error_files= ERR_ACCESS_DENIED ERR_CACHE_ACCESS_DENIED \
ERR_CACHE_MGR_ACCESS_DENIED ERR_CANNOT_FORWARD \
ERR_CONNECT_FAIL ERR_DNS_FAIL ERR_ESI ERR_FORWARDING_DENIED \
ERR_FTP_DISABLED ERR_FTP_FAILURE ERR_FTP_FORBIDDEN \
ERR_FTP_NOT_FOUND ERR_FTP_PUT_CREATED \
ERR_FTP_PUT_ERROR ERR_FTP_PUT_MODIFIED ERR_FTP_UNAVAILABLE \
ERR_ICAP_FAILURE ERR_INVALID_REQ ERR_INVALID_RESP \
ERR_INVALID_URL ERR_LIFETIME_EXP ERR_NO_RELAY \
ERR_ONLY_IF_CACHED_MISS ERR_READ_ERROR ERR_READ_TIMEOUT \
ERR_SHUTTING_DOWN ERR_SOCKET_FAILURE ERR_TOO_BIG ERR_UNSUP_REQ \
ERR_URN_RESOLVE ERR_WRITE_ERROR ERR_ZERO_SIZE_OBJECT
libexec= cachemgr.cgi digest_pw_auth diskd ip_user_check \
msnt_auth ncsa_auth ntlm_auth pam_auth smb_auth \
smb_auth.sh squid_db_auth squid_radius_auth squid_session \
squid_unix_group wbinfo_group.pl
.if !defined(SQUID_CONFIGURE_ARGS) || ${SQUID_CONFIGURE_ARGS:M*--disable-unlinkd*} == ""
libexec+= unlinkd
.endif
sbin= RunAccel RunCache squidclient squid
CONFIGURE_ARGS= --with-default-user=${SQUID_UID} \
--bindir=${PREFIX}/sbin \
--sbindir=${PREFIX}/sbin \
--datadir=${PREFIX}/etc/squid \
--libexecdir=${PREFIX}/libexec/squid \
--localstatedir=${PREFIX}/squid \
--sysconfdir=${PREFIX}/etc/squid \
--enable-removal-policies="lru heap" \
--disable-linux-netfilter \
--disable-linux-tproxy \
--disable-epoll
.include <bsd.port.pre.mk>
# Authentication methods and modules:
basic_auth= DB NCSA PAM MSNT SMB squid_radius_auth
digest_auth= password
external_acl= ip_user session unix_group wbinfo_group
MAN8+= ncsa_auth.8 pam_auth.8 squid_db_auth.8 squid_session.8 \
squid_unix_group.8
.if defined(WITH_SQUID_LDAP_AUTH)
USE_OPENLDAP= yes
CFLAGS+= -I${LOCALBASE}/include
LDFLAGS+= -L${LOCALBASE}/lib
MAN8+= squid_ldap_auth.8 squid_ldap_group.8
basic_auth+= LDAP
digest_auth+= ldap
external_acl+= ldap_group
libexec+= digest_ldap_auth squid_ldap_auth squid_ldap_group
.endif
.if defined(WITH_SQUID_SASL_AUTH)
LIB_DEPENDS+= sasl2.2:${PORTSDIR}/security/cyrus-sasl2
CFLAGS+= -I${LOCALBASE}/include
CPPFLAGS+= -I${LOCALBASE}/include
LDFLAGS+= -L${LOCALBASE}/lib
basic_auth+= SASL
libexec+= sasl_auth
.endif
.if !defined(NO_NIS) && !defined(WITHOUT_NIS)
basic_auth+= YP
libexec+= yp_auth
.endif
CONFIGURE_ARGS+= --enable-auth="basic digest negotiate ntlm" \
--enable-basic-auth-helpers="${basic_auth}" \
--enable-digest-auth-helpers="${digest_auth}" \
--enable-external-acl-helpers="${external_acl}" \
--enable-ntlm-auth-helpers="SMB"
.if !defined(NO_KERBEROS) && !defined(WITHOUT_KERBEROS)
# XXX This currently only works with heimdal from the base system,
# see files/patch-squid_kerb_auth:
CONFIGURE_ARGS+= --enable-negotiate-auth-helpers="squid_kerb_auth"
libexec+= squid_kerb_auth
.endif
# Storage schemes:
storage_schemes= ufs diskd null
.if defined(WITH_SQUID_AUFS)
storage_schemes+= aufs
# Only document switching from libpthread to libthr using libmap.conf
# where lipthread is the default threading library:
.if ${OSVERSION} < 700041
EXTRA_PATCHES+= ${PATCHDIR}/extra-patch-src-cf.data.pre.aufs
.endif
# Nil aufs threads is default, set any other value via SQUID_CONFIGURE_ARGS
CONFIGURE_ARGS+= --with-pthreads
CFLAGS+= ${PTHREAD_CFLAGS}
.endif
.if defined(WITH_SQUID_COSS)
# Starting with 3.0.STABLE9, COSS is disabled in Squid-3 until fixes
# from the 2.x series are backported to 3.x.
# storage_schemes+= coss
.endif
CONFIGURE_ARGS+= --enable-storeio="${storage_schemes}"
# Other options set via 'make config':
.if defined(WITH_SQUID_DELAY_POOLS)
CONFIGURE_ARGS+= --enable-delay-pools
.endif
.if defined(WITHOUT_SQUID_SNMP)
CONFIGURE_ARGS+= --disable-snmp
.endif
.if defined(WITHOUT_SQUID_CARP)
CONFIGURE_ARGS+= --disable-carp
.endif
.if defined(WITH_SQUID_SSL)
# we need to .include bsd.openssl.mk manually here.because USE_OPENSSL only
# works when it is defined before bsd.port{.pre}.mk is .included.
# This makes it currently impossible to combine this macro with OPTIONS to
# conditionally include OpenSSL support.
.include "${PORTSDIR}/Mk/bsd.openssl.mk"
CONFIGURE_ARGS+= --enable-ssl \
--with-openssl="${OPENSSLBASE}"
CFLAGS+= -I${OPENSSLINC}
LDFLAGS+= -L${OPENSSLLIB}
.endif
.if defined(WITH_SQUID_PINGER)
CONFIGURE_ARGS+= --enable-icmp
libexec+= pinger
.endif
.if defined(WITH_SQUID_DNS_HELPER)
CONFIGURE_ARGS+= --disable-internal-dns
libexec+= dnsserver
.endif
.if defined(WITH_SQUID_HTCP)
CONFIGURE_ARGS+= --enable-htcp
.endif
.if defined(WITH_SQUID_VIA_DB)
CONFIGURE_ARGS+= --enable-forw-via-db
.endif
.if defined(WITH_SQUID_CACHE_DIGESTS)
CONFIGURE_ARGS+= --enable-cache-digests
.endif
.if defined(WITHOUT_SQUID_WCCP)
CONFIGURE_ARGS+= --disable-wccp
.endif
.if defined(WITH_SQUID_WCCPV2)
CONFIGURE_ARGS+= --enable-wccpv2
.endif
.if defined(WITH_SQUID_STRICT_HTTP)
CONFIGURE_ARGS+= --disable-http-violations
.endif
.if defined(WITHOUT_SQUID_IDENT)
CONFIGURE_ARGS+= --disable-ident-lookups
.endif
.if defined(WITH_SQUID_REFERER_LOG)
CONFIGURE_ARGS+= --enable-referer-log
.endif
.if defined(WITH_SQUID_USERAGENT_LOG)
CONFIGURE_ARGS+= --enable-useragent-log
.endif
.if defined(WITH_SQUID_ARP_ACL)
CONFIGURE_ARGS+= --enable-arp-acl
.endif
.if defined(WITH_SQUID_IPFW)
CONFIGURE_ARGS+= --enable-ipfw-transparent
.endif
.if defined(WITH_SQUID_PF)
CONFIGURE_ARGS+= --enable-pf-transparent
.endif
.if defined(WITH_SQUID_IPFILTER)
CONFIGURE_ARGS+= --enable-ipf-transparent
.endif
.if defined(WITH_SQUID_ICAP)
CONFIGURE_ARGS+= --enable-icap-client
.endif
.if defined(WITH_SQUID_ESI)
CONFIGURE_ARGS+= --enable-esi
LIB_DEPENDS+= expat:${PORTSDIR}/textproc/expat2 \
xml2:${PORTSDIR}/textproc/libxml2
CFLAGS+= -I${LOCALBASE}/include -I${LOCALBASE}/include/libxml2
LDFLAGS+= -L${LOCALBASE}/lib
.endif
.if defined(WITHOUT_SQUID_KQUEUE)
# Squid-3's kqueue support is still marked as experimental, so it is not yet
# enabled automatically as in Squid-2. We are explicit about disabling it,
# nonetheless:
CONFIGURE_ARGS+= --disable-kqueue
.else
CONFIGURE_ARGS+= --enable-kqueue
.endif
.if defined(WITH_SQUID_LARGEFILE)
CONFIGURE_ARGS+= --with-large-files
.endif
.if defined(WITH_SQUID_STACKTRACES)
CONFIGURE_ARGS+= --enable-stacktraces
CFLAGS+= -g
STRIP=
.endif
.if defined(WITH_SQUID_DEBUG) || defined(WITH_DEBUG)
# TODO: are there other useful options that can/should be set to help
# the developers in debugging failures?
CONFIGURE_ARGS+= --disable-optimizations
WITH_DEBUG?= yes
.endif
# Languages:
#
# If you do not define SQUID_LANGUAGES yourself, all available language files
# will be installed; the default language will be English.
SQUID_LANGUAGES?= Armenian Azerbaijani Bulgarian Catalan Czech Danish \
Dutch English Estonian Finnish French German Greek \
Hebrew Hungarian Italian Japanese Korean Lithuanian \
Polish Portuguese Romanian Russian-1251 Russian-koi8-r \
Serbian Simplify_Chinese Slovak Spanish Swedish \
Traditional_Chinese Turkish Ukrainian-1251 \
Ukrainian-koi8-u Ukrainian-utf8
SQUID_DEFAULT_LANG?= templates
CONFIGURE_ARGS+= --enable-err-languages="${SQUID_LANGUAGES}" \
--enable-default-err-language=${SQUID_DEFAULT_LANG}
# Finally, add additional user specified configuration options:
CONFIGURE_ARGS+= ${SQUID_CONFIGURE_ARGS}
CONFIGURE_ENV+= CFLAGS="${CFLAGS}" \
CPPFLAGS="${CPPFLAGS}"\
LDFLAGS="${LDFLAGS}"
PLIST_DIRS= etc/squid/icons libexec/squid
PLIST_FILES= ${etc_files:S,^,etc/,} ${icon_files:S,^,etc/squid/icons/,} \
${libexec:S,^,libexec/squid/,} ${sbin:S,^,sbin/,}
.for d in ${SQUID_LANGUAGES} templates
PLIST_DIRS+= etc/squid/errors/${d}
PLIST_FILES+= ${error_files:S,^,etc/squid/errors/${d}/,}
.endfor
PLIST_DIRS+= etc/squid/errors etc/squid squid/logs squid/cache squid
post-patch:
@${REINPLACE_CMD} -e 's|%%PREFIX%%|${PREFIX}|g' \
${WRKSRC}/src/cf.data.pre
@${REINPLACE_CMD} -e 's|%%LOCALBASE%%|${LOCALBASE}|g' \
${WRKSRC}/helpers/basic_auth/SMB/Makefile.in \
${WRKSRC}/helpers/basic_auth/SMB/smb_auth.sh
pre-install:
# Prevent installation of .orig files by deleting them.
@${FIND} ${WRKSRC} -name '*.bak' -delete
@${FIND} ${WRKSRC} -name '*.orig' -delete
# XXX:
# Remove error pages that were prematurely integrated into 3.0.STABLE.
# This is done to keep the package list manageable by installing the same
# set of error files for every language:
@for d in Ukrainian-1251 Ukrainian-koi8-u Ukrainian-utf8 templates; \
do ${RM} -f ${WRKSRC}/errors/$${d}/ERR_SECURE_CONNECT_FAIL; \
done
pre-su-install:
@${SETENV} ${SCRIPTS_ENV} PKG_PREFIX=${PREFIX} \
${SH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL
post-install:
.if !defined(NOPORTEXAMPLES)
@${MKDIR} ${EXAMPLESDIR}
${INSTALL_DATA} ${WRKSRC}/helpers/basic_auth/DB/passwd.sql ${EXAMPLESDIR}
.endif
.if defined(WITH_SQUID_PINGER)
${CHMOD} 4510 ${PREFIX}/libexec/squid/pinger; \
${CHGRP} ${SQUID_GID} ${PREFIX}/libexec/squid/pinger
.endif
.if !defined(NOPORTDOCS)
@${MKDIR} ${DOCSDIR}
cd ${WRKSRC} && ${INSTALL_DATA} ${docs} ${DOCSDIR}
.endif
@${SETENV} PKG_PREFIX=${PREFIX} \
${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL
@${ECHO_CMD} "===> post-installation information for ${PKGNAME}:"
@${ECHO_CMD} ""
@${CAT} ${PKGMESSAGE}
@${ECHO_CMD} ""
.if defined(WITH_SQUID_COSS)
@${ECHO_CMD} "Note: COSS support is currently not available in Squid-3."
@${ECHO_CMD} "Please check your squid.conf and comment out any 'cache_dir coss' definitions."
@${ECHO_CMD} ""
.endif
.include <bsd.port.post.mk>
Reference in New Issue View Git Blame Copy Permalink