cpet/freebsd-ports
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
f173e267f3
freebsd-ports/lang/erlang/Makefile
Jimmy Olgeni ad6f264a1e In FreeBSD jails, the source and destination address of connections 
to localhost are changed to be the IP address of the jail.

Consider connections from the host's IP address to itself (e.g., the
source and destination address match) to be local for the access
control checks.

Reported by:	<tom diogunix com>
Obtained from:	Michael Santos <michael santos gmail com>
2010-12-23 15:02:17 +00:00

246 lines
7.5 KiB
Makefile
Raw Blame History

# New ports collection makefile for: erlang
# Date created: 11 Dec 1998
# Whom: ruslan@shevchenko.kiev.ua
#
# $FreeBSD$
#
PORTNAME= erlang
PORTVERSION= r14b01
PORTREVISION= 1
PORTEPOCH= 1
CATEGORIES= lang parallel java
MASTER_SITES= http://www.erlang.org/download/:erlangorg \
http://erlang.stacken.kth.se/download/:erlangorg \
http://www.csd.uu.se/ftp/mirror/erlang/download/:erlangorg \
http://www.erlang.se/doc/:erlangse \
http://www.erlang.se/publications/:publications \
http://www.sics.se/~joe/thesis/:joe \
${MASTER_SITE_LOCAL:S/$/:local/:S,%SUBDIR%/,olgeni/,}
DISTNAME= otp_src_R14B01
DISTFILES= ${DISTNAME}${EXTRACT_SUFX}:erlangorg \
${ERLANG_MAN}:erlangorg \
${ERLANG_DOCS}:erlangorg \
${DOC_DISTFILES}
DOC_DISTFILES= armstrong_thesis_2003.pdf:joe \
bjarnelic.pdf:publications \
erlang-book-part1.pdf:erlangorg \
master_thesis_patterns.pdf:local \
mnesia_overview.pdf:publications \
programming_rules.pdf:erlangse
DIST_SUBDIR= erlang
EXTRACT_ONLY= ${DISTNAME}${EXTRACT_SUFX}
PATCH_SITES= http://www.erlang.org/download/
MAINTAINER= olgeni@FreeBSD.org
COMMENT= A functional programming language from Ericsson
CONFLICTS?= erlang-lite-r[0-9]*
SUB_FILES= pkg-message
SUB_LIST= TOOLS_VSN=${TOOLS_VSN}
OPTIONS= JAVA "Enable Java applications" on \
X11 "Enable X11 support" on \
WX "Enable WX extensions" on \
ODBC "Enable ODBC" on \
SMP "Enable SMP" on
.include <bsd.port.pre.mk>
# The Java applications that are part of the Erlang distribution are
# not strictly necessary - it is included for completeness sake. A
# problem with the Erlang build procedure is that it only checks if
# javac is in the regular path - and then assumes that all of the jdk
# utilities is in the path as well. The only way to make sure that
# this is the case (that I could think of at least) was to make sure
# ${JAVA_HOME}/bin is added to the PATH, using the *_ENV macros.
.if !defined(WITHOUT_JAVA)
USE_JAVA= yes
JAVA_VERSION= 1.4+
# Make sure ${JAVA_HOME}/bin is in the path
CONFIGURE_ENV+= PATH=${PATH}:${JAVA_HOME}/bin
MAKE_ENV+= PATH=${PATH}:${JAVA_HOME}/bin
SCRIPT_ENV+= PATH=${PATH}:${JAVA_HOME}/bin
.endif
.if !defined(WITHOUT_X11)
USE_TK_RUN= yes
.if !defined(WITHOUT_WX)
USE_WX= 2.8+
WX_COMPS= wx contrib
WX_UNICODE= yes
CONFIGURE_ARGS+=--with-wx-config=${WX_CONFIG}
.endif
.endif
USE_GMAKE= yes
USE_PERL5= yes
USE_RC_SUBR= epmd.sh
GNU_CONFIGURE= yes
ONLY_FOR_ARCHS= i386 amd64 sparc64 powerpc
REINPLACE_ARGS= -i
MAKE_JOBS_UNSAFE= yes
.if (${OSVERSION} < 700000)
USE_GCC= 4.2+
.endif
.if !defined(WITHOUT_ODBC)
DRIVER_MANAGER?= iodbc
.if ${DRIVER_MANAGER} == "unixodbc"
LIB_DEPENDS+= odbc.1:${PORTSDIR}/databases/unixODBC
.else # assume we're using iodbc
LIB_DEPENDS+= iodbc.3:${PORTSDIR}/databases/libiodbc
.endif
.endif
ERLANG_MAN= otp_doc_man_R14B01.tar.gz
.if !defined(NOPORTDOCS)
ERLANG_DOCS= otp_doc_html_R14B01.tar.gz
.endif
ERLANG_PLIST= ${WRKDIR}/pkg-plist
# enabling --enable-smp-support crashes the OS when
# net_kernel:start([node_name, shortnames]) invoked repeatedly
.if !defined(WITHOUT_SMP)
CONFIGURE_ARGS+=--enable-threads --enable-dynamic-ssl-lib --enable-sctp --enable-smp-support
.else
CONFIGURE_ARGS+=--enable-threads --enable-dynamic-ssl-lib --enable-sctp
.endif
CFLAGS+= -I${LOCALBASE}/include
LDFLAGS+= -L${LOCALBASE}/lib
CONFIGURE_ENV+= CFLAGS="${CFLAGS}" LDFLAGS="${LDFLAGS}"
PLIST_SUB+= ERTS_VSN=${ERTS_VSN} TOOLS_VSN=${TOOLS_VSN}
.if ${ARCH} == i386
MAKE_ARGS+= ARCH=x86
.endif
# The man-pages are put (in spite of FreeBSD's port convention) in a private
# subdir. This is to avoid cluttering up the man page name space. Also the
# Erlang man pages are more of internal documentation using the man format than
# actual system man pages. (erl.1 and epmd.1 perhaps being the exception).
NO_MANCOMPRESS= yes
MAN1PREFIX= ${PREFIX}/lib/erlang
MAN3PREFIX= ${PREFIX}/lib/erlang
MAN4PREFIX= ${PREFIX}/lib/erlang
MAN6PREFIX= ${PREFIX}/lib/erlang
pre-configure:
@${REINPLACE_CMD} -e 's#%%CFLAGS%%#${CFLAGS}#g' ${WRKSRC}/lib/wx/configure
# Check if ${JAVAC} exists.
.if !defined(WITHOUT_JAVA)
@if [ ! -x ${JAVAC} ]; then \
${ECHO_MSG} ">> Error: cannot find ${JAVAC}."; \
exit 1; \
fi
.endif
# If X11 is not used, skip the gs application.
.if defined(WITHOUT_X11)
@${ECHO_CMD} "WITHOUT_X11 defined" > ${WRKSRC}/lib/gs/SKIP
.endif
# If ODBC is not used, skip the odbc application.
.if defined(WITHOUT_ODBC)
@${ECHO_CMD} "WITHOUT_ODBC defined" > ${WRKSRC}/lib/odbc/SKIP
.endif
# Install documentation. (HTML docs need to be in same dir as the
# rest, not in share/doc/erlang as it should, because of relative
# links in the documentation.
post-install:
@${LN} -sf ${PREFIX}/lib/erlang/lib/erl_interface-*/bin/erl_call ${PREFIX}/bin/erl_call
@for SECTION in 1 3 4 6; do \
${TAR} --unlink -xzpf ${DISTDIR}/${DIST_SUBDIR}/${ERLANG_MAN} \
-C ${PREFIX}/lib/erlang \
"man/man$${SECTION}/*.$${SECTION}" || ${TRUE}; \
done
@${RM} -rf ${PREFIX}/lib/erlang/man/cat?
.if !defined(NOPORTDOCS)
@${TAR} --unlink -xzpf ${DISTDIR}/${DIST_SUBDIR}/${ERLANG_DOCS} \
-C ${PREFIX}/lib/erlang
@${INSTALL_DATA} ${WRKSRC}/lib/dialyzer/doc/*.txt \
${PREFIX}/lib/erlang/lib/dialyzer-*/doc/
@${MKDIR} ${PREFIX}/share/doc/erlang
.for FILE in ${DOC_DISTFILES}
@${INSTALL_DATA} ${DISTDIR}/${DIST_SUBDIR}/$$(expr ${FILE} : '\([^:]*\)') ${PREFIX}/share/doc/erlang
.endfor
.endif
@${CHOWN} -R ${SHAREOWN}:${SHAREGRP} ${PREFIX}/lib/erlang
@${CHMOD} -R o+rX-w,g+rX-w ${PREFIX}/lib/erlang
# All non-library files.
@cd ${PREFIX}; ${FIND} lib/erlang/* -type d -empty \
| ${GREP} -v "^lib/erlang/lib" \
| ${SORT} \
| ${SED} -e 's#^#@exec ${MKDIR} %D/#g' \
> ${ERLANG_PLIST}
@cd ${PREFIX}; ${FIND} lib/erlang/* -type f -o -type l \
| ${GREP} -v "^lib/erlang/man" \
| ${GREP} -v "^lib/erlang/lib" \
| ${SORT} \
>> ${ERLANG_PLIST}
# Stock OTP libraries.
@for LIBRARY in ${OTP_LIBS}; do \
cd ${PREFIX}; ${TEST} -d lib/erlang/lib/$${LIBRARY} \
&& ${FIND} lib/erlang/lib/$${LIBRARY} -type f -o -type l; \
done | ${SORT} >> ${ERLANG_PLIST}
# Stock OTP library directories.
@for LIBRARY in ${OTP_LIBS}; do \
cd ${PREFIX}; ${TEST} -d lib/erlang/lib/$${LIBRARY} \
&& ${FIND} lib/erlang/lib/$${LIBRARY} -type d -empty \
| ${SED} -e 's#^#@exec ${MKDIR} %D/#g'; \
done | ${SORT} >> ${ERLANG_PLIST}
@for LIBRARY in ${OTP_LIBS}; do \
cd ${PREFIX}; ${TEST} -d lib/erlang/lib/$${LIBRARY} \
&& ${FIND} lib/erlang/lib/$${LIBRARY} -type d \
| ${SED} -e 's/^/@dirrm /g'; \
done | ${SORT} -r >> ${ERLANG_PLIST}
# Other directories.
@cd ${PREFIX}; ${FIND} lib/erlang/* -type d | ${SORT} -r \
| ${GREP} -v "^lib/erlang/man" \
| ${GREP} -v "^lib/erlang/lib" \
| ${SED} -e 's/^/@dirrm /g' \
>> ${ERLANG_PLIST}
@${ECHO_CMD} "r ${TMPPLIST}" > ${WRKDIR}/ex.script
@${ECHO_CMD} "/Insert PLIST here" >> ${WRKDIR}/ex.script
@${ECHO_CMD} "d" >> ${WRKDIR}/ex.script
@${ECHO_CMD} "r ${ERLANG_PLIST}" >> ${WRKDIR}/ex.script
@${ECHO_CMD} "x!" >> ${WRKDIR}/ex.script
@cd ${WRKDIR}; ex < ex.script
@${CAT} ${PKGMESSAGE}
buildplt:
@${ECHO_CMD} =====================================================
@${ECHO_CMD} WARNING: building a full PLT may literally take hours
@${ECHO_CMD}
@${ECHO_CMD} You may wish to settle for the standard PLT built by
@${ECHO_CMD} dialyzer on the first run.
@${ECHO_CMD} =====================================================
@cd ${PREFIX}/lib/erlang/lib; ${PREFIX}/bin/dialyzer --verbose --build_plt --output_plt ${HOME}/.dialyzer_plt -c $$(find ${OTP_LIBS} -name ebin -maxdepth 1) || true
.include "Makefile.lib"
.include "Makefile.man"
.include <bsd.port.post.mk>
Reference in New Issue View Git Blame Copy Permalink