freebsd-ports/korean/ftghostscript5/Makefile
Satoshi Asami c6bcad2436 (1) Add new variable, XFREE86_VERSION, to specify which version of
XFree86 (3 or 4) to depend to when USE_XLIB is set.
    XFREE86_VERSION defaults to 3 for now, but adventurous users can
    override it in /etc/make.conf.  When XFREE86_VERSION=3, USE_XLIB
    will add a dependency to x11/XFree86; when it is set to 4, the
    dependency will be to x11/XFree86-4-libraries.  When
    XFREE86_VERSION=4, the PKG_IGNORE_DEPENDS and ALWAYS_BUILD_DEPENDS
    hacks to avoid messing with XFree86 are turned off.

    Since XFree86 version 4 includes some software that used to be
    separate ports, when XFREE86_VERSION=3 the following variables are
    provided:

    USE_DGS		LIB_DEPENDS on x11/dgs
    USE_FREETYPE	LIB_DEPENDS on print/freetype
    USE_MESA		LIB_DEPENDS on graphics/Mesa3
    USE_XPM		LIB_DEPENDS on graphics/xpm

    When XFREE86_VERSION=4, these variables have no effect.  The
    LIB_DEPENDS in the tree for the above four ports have all been
    converted to the USE_* counterparts.  For your information, this
    is the count of the number of ports:

    USE_DGS		0
    USE_FREETYPE	16
    USE_MESA		36
    USE_XPM		236

    There is a new variable, XAWVER, which is set to 6 when
    XFREE86_VERSION=3 and 7 when XFREE86_VERSION=4.  This is also
    passed to PLIST_SUB so ports that build Xaw based shared libraries
    can use this variable to substitute the shlib version number.

    There is also a provision of using a separate mtree file for
    XFREE86_VERSION=4, but that part is not enabled yet.

Reviewed by:	the ports list
Tested by:	make index (XFREE86_VERSION=3 only)

(2) Add hebrew to list of valid categories.
Submitted by:	nbm
2000-08-03 09:28:57 +00:00

116 lines
3.8 KiB
Makefile

# New ports collection makefile for: freetype-ghostscript
# Date created: 27 Mar 1998
# Whom: CHOI Junho <cjh@kr.freebsd.org>
#
# $FreeBSD$
#
# Based on print/ghostscript5 and japanese/vfghostscript5
# use Adobe's CID-keyed Korean font because there are no wide accepted
# default korean font yet
#
PORTNAME= ghostscript
PORTVERSION= 5.10
CATEGORIES= korean print
MASTER_SITES= ftp://ftp.pdb.sni.de/pub/utilities/misc/ \
http://www.ozemail.com.au/~geoffk/pdfencrypt/ \
ftp://ftp.cs.wisc.edu/ghost/gnu/gs510/ \
$(MASTER_SITE_GNU) \
http://www.ldl.jaist.ac.jp/~akr/nonresearch/free-software/ghostscript/ \
http://itohws03.ee.noda.sut.ac.jp/~matsuda/VFlib-FT/ \
ftp://ftp.kr.freebsd.org/pub/users/cjh/gs-ko/ \
ftp://ftp.kr.freebsd.org/pub/users/cjh/gs-ko/misc/
MASTER_SITE_SUBDIR= ghostscript
PKGNAMESUFFIX= -ft
DISTNAME= ${PKGNAME}
DISTFILES= ${PCL3_DRV} ${DECRYPT_PDF} ${GS_SOURCES} \
${VFLIB_GS} ${KFFTYPE} ${KFFTYPE_PATCH} \
${HFFTYPE} ${GS_CID_PATCH}
EXTRACT_ONLY= ${GS_SOURCES} ${PCL3_DRV}
MAINTAINER= cjh@FreeBSD.org
RUN_DEPENDS= $(LOCALBASE)/share/ghostscript/fonts:${PORTSDIR}/print/gsfonts \
$(LOCALBASE)/share/ghostscript/fonts/CMap:${PORTSDIR}/korean/munhwafonts-cid \
$(X11BASE)/lib/X11/fonts/TrueType/gulim.ttf:${PORTSDIR}/korean/baekmukfonts-ttf
BUILD_DEPENDS= /nonexistent:${PORTSDIR}/graphics/jpeg:extract \
/nonexistent:${PORTSDIR}/graphics/png:extract
LIB_DEPENDS= png.4:${PORTSDIR}/graphics/png
USE_XLIB= YES
USE_FREETYPE= YES
WRKSRC= ${WRKDIR}/gs5.10
MAKEFILE= unix-gcc.mak
#MAKE_FLAGS= prefix=${PREFIX} CFLAGS="${CFLAGS}" -f
MAKE_FLAGS= prefix=${PREFIX} -f
MAN1= gs.1 pdf2dsc.1 pdf2ps.1 ps2ascii.1 ps2epsi.1 ps2pdf.1 gs-hpdj.1
GS_SOURCES= ghostscript-5.10.tar.gz
# Additional driver for HP PCL3 Printers
PCL3_DRV= hpdj-2.6.tar.gz
# replacement for pdf_sec.ps, that allows you to read encrypted PDF files
DECRYPT_PDF= pdf_sec.ps
# Korean patch files
# vflib patch
VFLIB_GS= gs5.10-vflib-1.1.tar.gz
# kfftype
KFFTYPE= gs5-kfftype.tar.gz
# kfftype patches
KFFTYPE_PATCH= gs5-kfftype-patch1.diff gs5-kfftype-patch2.diff
# hfftype patch
HFFTYPE= gs5-hfftype-0.2.tar.gz
# cid-keyed font bug patch for 5.10
GS_CID_PATCH= gs5.10-cid-bugfix.diff
post-extract:
${LN} -s ${WRKDIRPREFIX}${.CURDIR}/../../graphics/jpeg/work/jpeg-* ${WRKSRC}/jpeg
${LN} -s ${WRKDIRPREFIX}${.CURDIR}/../../graphics/png/work/libpng-* ${WRKSRC}/libpng
# additional PCL3 driver
$(TAR) -xvf ${WRKDIR}/hpdj-2.6/hpdj.tar -C $(WRKSRC)
@${CAT} ${WRKSRC}/devs.mak-5.10.add >> ${WRKSRC}/devs.mak
@${PATCH} -d ${WRKSRC} --forward --quiet -E < ${WRKSRC}/zmedia2.c-5.10.diff
pre-patch:
cd ${WRKSRC} && tar -xzf ${DISTDIR}/${VFLIB_GS} && \
${PATCH} -s -p1 < gs5.10-vflib-1.1/gs5.10-vflib-1.1.diff
cd ${WRKSRC} && tar -xzf ${DISTDIR}/${KFFTYPE} && \
cd ${WRKSRC}/kfftype && \
for file in ${KFFTYPE_PATCH}; do \
${PATCH} -s -p0 < ${DISTDIR}/$$file; \
done && \
${CP} -r ${WRKSRC}/kfftype/* ${WRKSRC}/
cd ${WRKSRC} && tar -xzf ${DISTDIR}/${HFFTYPE} && \
${CP} -r ${WRKSRC}/gs5-hfftype-0.2/* ${WRKSRC}/
cd ${WRKSRC} && ${PATCH} -s -p1 < \
${WRKSRC}/gs5-hfftype-0.2/gs5.10-hfftype.diff
cd ${WRKSRC} && ${PATCH} ${PATCH_DIST_ARGS} < \
${DISTDIR}/${GS_CID_PATCH}
do-configure:
@(cd ${WRKSRC}; ${SH} tar_cat )
pre-build:
${SED} -e "s@%%PREFIX%%@${X11BASE}@g" \
${FILESDIR}/hconfig.ps.in > \
${WRKSRC}/hangul/hconfig.ps
pre-install:
@${MKDIR} ${PREFIX}/share/ghostscript ${PREFIX}/bin ${PREFIX}/man/man1
post-install:
strip ${PREFIX}/bin/gs
${INSTALL_DATA} ${DISTDIR}/${DECRYPT_PDF} \
${PREFIX}/share/ghostscript/5.10ft
$(MKDIR) ${PREFIX}/libexec/lpr
${INSTALL_SCRIPT} $(WRKSRC)/pj-gs.sh ${PREFIX}/libexec/lpr
${INSTALL_SCRIPT} $(WRKSRC)/sysvlp.sh ${PREFIX}/libexec/lpr
${INSTALL_SCRIPT} $(WRKSRC)/if-hpdj ${PREFIX}/libexec/lpr
${INSTALL_DATA} ${WRKSRC}/gs5-hfftype-0.2/README \
${PREFIX}/share/ghostscript/5.10ft/doc/README.ko
.include <bsd.port.mk>