freebsd-ports/mail/exim/Makefile
Jimmy Olgeni 1be0301128 Spaces->tabs in the mail category.
(I know, I look boring and pedant :o)
2001-02-05 15:11:27 +00:00

155 lines
4.2 KiB
Makefile

# New ports collection makefile for: exim
# Date created: 23 June 1996
# Whom: markm@FreeBSD.org
#
# $FreeBSD$
#
PORTNAME= exim
PORTVERSION= 3.20
CATEGORIES= mail
MASTER_SITES= ftp://ftp.cus.cam.ac.uk/pub/software/programs/exim/ \
http://www.exim.org/ftp/ \
ftp://ftp.is.co.za/networking/mail/transport/exim/
DISTFILES= exim-3.20.tar.gz exim-texinfo-3.20.tar.gz
MAINTAINER= sheldonh@FreeBSD.org
# If WITHOUT_X11 is not defined, the eximon monitor, which requires X, will
# be built. Comment it out unless you have or want XFree86 installed!
.if !defined(WITHOUT_X11)
USE_XLIB= yes
.endif
USE_PERL5= yes
MAKE_ENV+= OSTYPE=${OPSYS} ARCHTYPE=${MACHINE_ARCH}
# Uncomment the WITH_LDAP, WITH_MYSQL, WITH_PAM and WITH_PGSQL definitions
# to link against libmysqlclient, libpam and libpq respectively.
# The libpam linkage is required for SMTP AUTH support.
#WITH_LDAP= yes
#WITH_MYSQL= yes
#WITH_PAM= yes
#WITH_PGSQL= yes
# Link against OpenSSL in the base system for STARTTLS support.
#WITH_TLS= yes
# Enable the embedded Perl interpreter, allowing Perl subroutines to be
# called during string expansion.
WITH_PERL= yes
# If WITH_PAM is defined then one or more of PAM_CRAM_MD5 and PAM_PLAINTEXT
# must be left uncommented.
PAM_CRAM_MD5= yes
PAM_PLAINTEXT= yes
# If WITH_LDAP is defined, LDAP_LIB_TYPE must be one of UMICHIGAN,
# NETSCAPE or SOLARIS7.
LDAP_LIB_TYPE=UMICHIGAN
# Uncomment to compile support for non-standard mailbox formats.
#WITH_MAILDIR= yes
#WITH_MAILSTORE= yes
#WITH_MBX= yes
# You should not need to fiddle with anything below this point.
SEDLIST= -e 's,XX_PREFIX_XX,${PREFIX},' \
-e 's,XX_BINOWN_XX,${BINOWN},'
.if !defined(USE_XLIB)
SEDLIST+= -e 's,^EXIM_MONITOR,\#EXIM_MONITOR,'
.endif
.if defined(WITH_TLS)
SEDLIST+= -e 's,XX_TLS_LIBS_XX,-lssl -lcrypto,' \
-e 's,^\# SUPPORT_TLS,SUPPORT_TLS,'
.else
SEDLIST+= -e 's,^TLS_LIBS,\#TLS_LIBS,'
.endif
.if !defined(WITH_PERL)
SEDLIST+= -e 's,^EXIM_PERL,\#EXIM_PERL,'
.endif
.if defined(WITH_LDAP)
LIB_DEPENDS+= lber.1:${PORTSDIR}/net/openldap
SEDLIST+= -e 's,XX_LDAP_LIBS_XX,-L${PREFIX}/lib -llber -lldap,' \
-e 's,XX_LDAP_INCLUDE_XX,-I${PREFIX}/include,' \
-e 's,XX_LDAP_TYPE_XX,${LDAP_LIB_TYPE},' \
-e 's,^\# LOOKUP_LDAP,LOOKUP_LDAP,'
.else
SEDLIST+= -e 's,XX_LDAP_[^ ]*_XX,,' \
-e 's,^LDAP_LIB_TYPE,\#LDAP_LIB_TYPE,'
.endif
.if defined(WITH_MYSQL)
LIB_DEPENDS+= mysqlclient.10:${PORTSDIR}/databases/mysql323-client
SEDLIST+= -e 's,XX_MYSQL_LIBS_XX,-L${PREFIX}/lib/mysql -lmysqlclient,' \
-e 's,XX_MYSQL_INCLUDE_XX,-I${PREFIX}/include/mysql,' \
-e 's,^\# LOOKUP_MYSQL,LOOKUP_MYSQL,'
.else
SEDLIST+= -e 's,XX_MYSQL_[^ ]*_XX,,'
.endif
.if defined(WITH_PAM)
SEDLIST+= -e 's,XX_PAM_LIBS_XX,-lpam,'
.else
SEDLIST+= -e 's,XX_PAM_LIBS_XX,,' \
-e 's,^SUPPORT_PAM,\#SUPPORT_PAM,'
.endif
.if !defined(WITH_PAM) || !defined(PAM_CRAM_MD5)
SEDLIST+= -e 's,^AUTH_CRAM_MD5,\#AUTH_CRAM_MD5,'
.endif
.if !defined(WITH_PAM) || !defined(PAM_PLAINTEXT)
SEDLIST+= -e 's,^AUTH_PLAINTEXT,\#AUTH_PLAINTEXT,'
.endif
.if defined(WITH_PGSQL)
LIB_DEPENDS+= pq.2:${PORTSDIR}/databases/postgresql7
SEDLIST+= -e 's,XX_PGSQL_LIBS_XX,-L${PREFIX}/pgsql/lib -lpq,' \
-e 's,XX_PGSQL_INCLUDE_XX,-I${PREFIX}/pgsql/include,' \
-e 's,^\# LOOKUP_PGSQL,LOOKUP_PGSQL,'
.else
SEDLIST+= -e 's,XX_PGSQL_[^ ]*_XX,,'
.endif
.if !defined(WITH_PGSQL) && !defined(WITH_MYSQL) && !defined(WITH_LDAP)
SEDLIST+= -e 's,^LOOKUP_LIBS,\#LOOKUP_LIBS,' \
-e 's,^LOOKUP_INCLUDE,\#LOOKUP_INCLUDE,'
.endif
.if defined(WITH_MAILDIR)
SEDLIST+= -e 's,^\# SUPPORT_MAILDIR,SUPPORT_MAILDIR,'
.endif
.if defined(WITH_MAILSTORE)
SEDLIST+= -e 's,^\# SUPPORT_MAILSTORE,SUPPORT_MAILSTORE,'
.endif
.if defined(WITH_MBX)
SEDLIST+= -e 's,^\# SUPPORT_MBX,SUPPORT_MBX,'
.endif
do-configure:
${MKDIR} ${WRKSRC}/Local
${SED} ${SEDLIST} < ${FILESDIR}/Makefile > ${WRKSRC}/Local/Makefile
${SED} ${SEDLIST} < ${FILESDIR}/configure.default \
> ${WRKSRC}/src/configure.default
${CP} ${FILESDIR}/eximon.conf ${WRKSRC}/Local
cd ${WRKSRC}/doc && \
for i in ../../exim-texinfo-3.20/doc/* ; do \
${LN} -sf $$i ; \
done
post-build:
${INSTALL_SCRIPT} ${FILESDIR}/exim.sh \
${WRKSRC}/build-${OPSYS}-${MACHINE_ARCH}
${TOUCH} ${WRKSRC}/build-${OPSYS}-${MACHINE_ARCH}/eximon.bin
${TOUCH} ${WRKSRC}/build-${OPSYS}-${MACHINE_ARCH}/eximon
.include <bsd.port.mk>