freebsd-ports/mail/postfix28/Makefile
Edwin Groothuis f4b7544fdd update mail/postfix to latest
update postfix to 2.1.5
	update IPv6 patches to latest corresponding versions

PR:		ports/72009
Submitted by:	Vivek Khera <vivek@khera.org>
2004-10-12 23:58:50 +00:00

183 lines
6.1 KiB
Makefile

# New ports collection makefile for: postfix
# Date created: 18 Mar 1999
# Whom: torstenb
#
# $FreeBSD$
#
# To pre-select options in batch mode, run make like this:
#
# make -DBATCH POSTFIX_OPTIONS="DB3 IPv6TLS"
#
# the options are the same names as in the scripts/configure.postfix file.
# POSTFIX_OPTIONS can be set in /etc/make.conf also.
# NOTE: PCRE is enabled by default unless you specifically disable it.
PORTNAME= postfix
PORTVERSION= 2.1.5
PORTEPOCH= 1
CATEGORIES= mail ipv6
MASTER_SITES= ftp://ftp.porcupine.org/mirrors/postfix-release/official/ \
ftp://ftp.aet.tu-cottbus.de/pub/postfix_tls/%SUBDIR%/ \
ftp://ftp.tux.org/pub/net/postfix/official/ \
ftp://ftp.utoronto.ca/mirror/packages/postfix/official/ \
ftp://ftp.samurai.com/pub/postfix/official/ \
${MASTER_SITE_RINGSERVER:S,%SUBDIR%,net/mail/postfix/official/&,}
MASTER_SITE_SUBDIR= . old related/postfix
DISTNAME= postfix-${PORTVERSION}
DIST_SUBDIR= ${PORTNAME}
MAINTAINER= vivek@khera.org
COMMENT= A secure alternative to widely-used Sendmail
CONFLICTS= courier-0.* postfix-1.* postfix-2.0.* sendmail-8.* sendmail-*-8.* smail-3.* zmailer-2.*
USE_SUBMAKE= yes
USE_REINPLACE= yes
MAN1= mailq.1 newaliases.1 postalias.1 postcat.1 postconf.1 postdrop.1 \
postfix.1 postkick.1 postlock.1 postlog.1 postmap.1 postqueue.1 \
postsuper.1 sendmail.1
MAN5= access.5 aliases.5 canonical.5 cidr_table.5 ldap_table.5 \
mysql_table.5 pgsql_table.5 postconf.5 pcre_table.5 \
regexp_table.5 relocated.5 transport.5 virtual.5 \
header_checks.5 body_checks.5
MAN8= bounce.8 cleanup.8 defer.8 error.8 flush.8 lmtp.8 local.8 \
master.8 oqmgr.8 pickup.8 pipe.8 proxymap.8 qmgr.8 qmqpd.8 showq.8 \
smtp.8 smtpd.8 spawn.8 trace.8 trivial-rewrite.8 verify.8 virtual.8
# TLS patch adds to MAN8 but doesn't have .html file, so avoid trying to
# patch it.
MAN8base=$(MAN8:S/tlsmgr.8//)
CONF1= main.cf master.cf access aliases canonical header_checks relocated \
transport virtual
README= ADDRESS_CLASS_README ADDRESS_REWRITING_README \
ADDRESS_VERIFICATION_README BACKSCATTER_README \
BASIC_CONFIGURATION_README BUILTIN_FILTER_README \
CONTENT_INSPECTION_README CYRUS_README DATABASE_README DB_README \
DEBUG_README ETRN_README FILTER_README INSTALL LDAP_README \
LINUX_README LMTP_README LOCAL_RECIPIENT_README MAILDROP_README \
MYSQL_README NFS_README OVERVIEW PACKAGE_README PCRE_README \
PGSQL_README QMQP_README QSHAPE_README RESTRICTION_CLASS_README \
SASL_README SCHEDULER_README SMTPD_ACCESS_README SMTPD_POLICY_README \
SMTPD_PROXY_README STANDARD_CONFIGURATION_README TUNING_README \
ULTRIX_README UUCP_README VERP_README VIRTUAL_README \
XCLIENT_README XFORWARD_README
.if !defined(DEBUG)
MAKEFILEFLAGS+= DEBUG=
.endif
MAKEFILEFLAGS+= CC="${CC}" OPT="${CFLAGS}"
SCRIPTS_ENV= WRKDIRPREFIX="${WRKDIRPREFIX}" \
TOUCH="${TOUCH}" \
MKDIR="${MKDIR}" \
POSTFIX_OPTIONS="${POSTFIX_OPTIONS}"
pre-fetch:
@${SETENV} ${SCRIPTS_ENV} ${SH} ${SCRIPTDIR}/configure.postfix
.if exists(${WRKDIRPREFIX}${.CURDIR}/Makefile.inc)
.include "${WRKDIRPREFIX}${.CURDIR}/Makefile.inc"
.endif
.if defined(WITHOUT_PCRE)
POSTFIX_CCARGS+= -DNO_PCRE
.else
LIB_DEPENDS+= pcre.0:${PORTSDIR}/devel/pcre
POSTFIX_CCARGS+= -DHAS_PCRE -I${LOCALBASE}/include
POSTFIX_AUXLIBS+= -L${LOCALBASE}/lib -lpcre
.endif
post-patch:
(cd ${WRKSRC} && ${MAKE} -f Makefile.init makefiles ${MAKEFILEFLAGS} \
CCARGS="${POSTFIX_CCARGS}" AUXLIBS="${POSTFIX_AUXLIBS}" && \
${ECHO} "all: default" >> Makefile)
pre-patch:
${ECHO} "<body>See <A HREF="header_checks.5.html">header_checks.5.html</A></BODY>" > ${WRKSRC}/html/body_checks.5.html
.for file in ${MAN1}
@${REINPLACE_CMD} -e "s|/etc/postfix|${PREFIX}/etc/postfix|g" \
${WRKSRC}/man/man1/${file} ${WRKSRC}/html/${file}.html
.endfor
.for file in ${MAN5}
@${REINPLACE_CMD} -e "s|/etc/postfix|${PREFIX}/etc/postfix|g" \
${WRKSRC}/man/man5/${file} ${WRKSRC}/html/${file}.html
.endfor
.for file in ${MAN8base}
@${REINPLACE_CMD} -e "s|/etc/postfix|${PREFIX}/etc/postfix|g" \
${WRKSRC}/man/man8/${file} ${WRKSRC}/html/${file}.html
.endfor
.for file in ${README}
@${REINPLACE_CMD} -e "s|/etc/postfix|${PREFIX}/etc/postfix|g" \
${WRKSRC}/html/${file}.html
@${REINPLACE_CMD} -e "s|/etc/postfix|${PREFIX}/etc/postfix|g" \
${WRKSRC}/README_FILES/${file}
.endfor
.for file in ${CONF1}
@${REINPLACE_CMD} -e "s|/etc/postfix|${PREFIX}/etc/postfix|g" ${WRKSRC}/conf/${file}
.endfor
pre-install:
@${SETENV} ${SCRIPTS_ENV} PKG_PREFIX="${PREFIX}" ${SH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL
.if defined(NOPORTDOCS)
READMEDIR=no
.else
READMEDIR=${PREFIX}/share/doc/postfix
.endif
do-install:
cd ${WRKSRC}; ${SH} postfix-install -non-interactive install_root=/ tempdir=/tmp \
config_directory=${PREFIX}/etc/postfix \
daemon_directory=${PREFIX}/libexec/postfix \
command_directory=${PREFIX}/sbin \
queue_directory=/var/spool/postfix \
sendmail_path=${PREFIX}/sbin/sendmail \
newaliases_path=${PREFIX}/bin/newaliases \
mailq_path=${PREFIX}/bin/mailq \
mail_owner=postfix \
setgid_group=maildrop \
manpage_directory=${PREFIX}/man \
sample_directory=${PREFIX}/etc/postfix \
readme_directory=${READMEDIR}
.for file in ${CONF1}
${INSTALL_DATA} ${WRKSRC}/conf/${file} \
${PREFIX}/etc/postfix/dist-${file}
.endfor
@${INSTALL_SCRIPT} \
${WRKSRC}/auxiliary/rmail/rmail \
${PREFIX}/bin/rmail
# optional TEST binaries
.for file in ${BIN1}
@${INSTALL_PROGRAM} ${WRKSRC}/bin/${file} ${PREFIX}/sbin
.endfor
.if !defined(NOPORTDOCS)
@${INSTALL} -d -o ${DOCOWN} -g ${DOCGRP} -m 555 ${DOCSDIR}
@cd ${WRKSRC}/html && ${INSTALL_DATA} *.html *.jpg *.png ${DOCSDIR} && \
${ECHO_MSG} "Installed HTML documentation in ${DOCSDIR}"
.endif
post-install:
@${SETENV} ${SCRIPTS_ENV} PKG_PREFIX="${PREFIX}" ${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL
# need to fixup ${PREFIX}/etc/postfix/postfix-files to indicate compressed
# man pages, since the ports software compresses them after this step, and
# if we run etc/postfix/post-install again during package installation,
# it will complain about missing files.
@${SETENV} ${SCRIPTS_ENV} ${SH} ${SCRIPTDIR}/fix-files-list
@${CAT} ${PKGMESSAGE}
post-clean:
@${RM} -f ${WRKDIRPREFIX}${.CURDIR}/Makefile.inc
.include <bsd.port.mk>