freebsd-ports/comms
Rene Ladan 4c20e3ab39 comms/dcf77pi: Update to 1.1.3
Changes:
- Add the correct number of minutes when the accumulated minute length is
  more than 60 seconds (happens when e.g. the transmitter is off).
- Disallow DST changes or leap seconds if a 0 is specified for summermonth,
  wintermonth, or leapsecmonths.
- Allow compilation on NetBSD.
2014-01-31 00:34:27 +00:00
..
acfax In preparation for making libtool generate libraries with a sane name, fix all 2013-12-11 15:10:44 +00:00
aldo In preparation for making libtool generate libraries with a sane name, fix all 2013-12-11 15:10:44 +00:00
amtterm Include patches from git repo to avoid keeling over 2013-12-08 13:09:07 +00:00
anyremote - Stage support 2014-01-28 16:48:22 +00:00
aprsd - Enable staging 2013-12-30 21:07:40 +00:00
atslog Add NO_STAGE all over the place in preparation for the staging support (cat: comms) 2013-09-20 16:03:29 +00:00
bfhist Add NO_STAGE all over the place in preparation for the staging support (cat: comms) 2013-09-20 16:03:29 +00:00
bforce Add NO_STAGE all over the place in preparation for the staging support (cat: comms) 2013-09-20 16:03:29 +00:00
bforce-kst Support STAGEDIR. 2013-11-18 00:37:15 +00:00
birda Fix properties on pkg-plist 2014-01-21 23:18:05 +00:00
bluegps Add NO_STAGE all over the place in preparation for the staging support (cat: comms) 2013-09-20 16:03:29 +00:00
bluez-firmware - Remove NO_STAGE as these have been tested to be safe 2013-09-25 00:54:08 +00:00
bpl+ Support STAGEDIR. 2013-11-18 00:37:15 +00:00
callsign Support STAGEDIR. 2013-11-18 00:37:15 +00:00
cdr_read Convert to USES=dos2unix 2013-11-18 13:45:44 +00:00
chirp - Add LICENSE 2013-12-27 21:10:53 +00:00
chu Remove useless dancing of pre.mk/post.mk 2013-12-28 17:13:30 +00:00
comserv Add NO_STAGE all over the place in preparation for the staging support (cat: comms) 2013-09-20 16:03:29 +00:00
conserver Fix properties on pkg-plist 2014-01-21 23:18:05 +00:00
conserver-com Reduce over inclusion of bsd.port.mk 2014-01-15 23:22:11 +00:00
cutecom - Remove manual creation and removal of share/applications, as it's now in the mtree (categories starting with [bce]) 2013-10-22 13:57:35 +00:00
cwdaemon - convert to stage 2013-12-29 16:17:51 +00:00
dabstick-radio In preparation for making libtool generate libraries with a sane name, fix all 2013-12-11 15:10:44 +00:00
dcf77pi comms/dcf77pi: Update to 1.1.3 2014-01-31 00:34:27 +00:00
deforaos-phone comms/deforaos-phone: update to 0.3.12 2013-11-04 21:15:51 +00:00
dfu-programmer Add NO_STAGE all over the place in preparation for the staging support (cat: comms) 2013-09-20 16:03:29 +00:00
dfu-util Support STAGEDIR. 2013-11-18 00:37:15 +00:00
ebook2cw - convert to stage 2013-12-29 00:33:17 +00:00
ebook2cwgui - convert to stage 2013-12-21 16:58:34 +00:00
echolinux - Chase x11-toolkits/xforms shlib bump 2014-01-08 09:53:50 +00:00
efax - Perform general cleanup: 2013-10-30 05:09:22 +00:00
efax-gtk Revert USE_GCC to yes 2013-10-27 19:35:12 +00:00
ems-flasher Update to libmpc version 1.0.1 which brings the following fixes: 2013-10-26 00:52:33 +00:00
esmska Convert comms to MDOCS and MEXAMPLES. 2014-01-03 16:06:00 +00:00
fl_moxgen In preparation for making libtool generate libraries with a sane name, fix all 2013-12-11 15:10:44 +00:00
fldigi - convert from old USE_ to USES 2014-01-07 16:13:43 +00:00
flwrap - convert old USE_GMAKE and USE_DOS2UNIX to new Uses= 2014-01-07 01:16:36 +00:00
gammu Add NO_STAGE all over the place in preparation for the staging support (cat: comms) 2013-09-20 16:03:29 +00:00
gammu-devel Convert comms to MDOCS and MEXAMPLES. 2014-01-03 16:06:00 +00:00
ge-x2212 Add NO_STAGE all over the place in preparation for the staging support (cat: comms) 2013-09-20 16:03:29 +00:00
geoid - Enable staging 2013-12-30 21:12:16 +00:00
gkermit Support STAGEDIR. 2013-11-18 00:37:15 +00:00
gmfsk In preparation for making libtool generate libraries with a sane name, fix all 2013-12-11 15:10:44 +00:00
gnocky - Stage support 2013-12-31 12:27:57 +00:00
gnokii Update to 1.0. 2014-01-12 19:48:11 +00:00
gnuradio Python cleanup: 2014-01-13 21:00:02 +00:00
gpredict Support STAGEDIR. 2013-11-18 00:37:15 +00:00
gpsk31 - Remove manual creation and removal of share/applications, as it's now in the mtree (categories starting with [bce]) 2013-10-22 13:57:35 +00:00
gqrx - Convert to USES=qmake (and other USES while I'm here) 2013-11-22 12:55:00 +00:00
gr-osmosdr Python cleanup: 2014-01-13 21:00:02 +00:00
grig Support STAGEDIR. 2013-11-18 00:37:15 +00:00
gscmxx Add NO_STAGE all over the place in preparation for the staging support (cat: comms) 2013-09-20 16:03:29 +00:00
gsmlib Support STAGEDIR. 2013-11-18 00:37:15 +00:00
gstreamer1-plugins-spandsp Stagify Gstreamer ports. 2013-11-01 22:14:07 +00:00
gtkmmorse Update freetype to 2.5.2. 2013-12-24 21:22:21 +00:00
hamfax Update to 0.3.6. 2013-11-08 14:31:40 +00:00
hamlib - Convert to USES=tcl 2014-01-29 13:32:25 +00:00
hcidump Stage support 2014-01-20 18:28:51 +00:00
hf - Fix build on 10 2013-12-16 03:23:23 +00:00
hidapi - Remove part of a patch that wasn't entirely correct and let the port 2014-01-29 21:01:51 +00:00
hylafax - use STAGEDIR 2013-12-17 10:39:33 +00:00
ibp - Enable staging 2013-12-30 21:30:58 +00:00
java-commapi Add NO_STAGE all over the place in preparation for the staging support (cat: comms) 2013-09-20 16:03:29 +00:00
java-commapi-freebsd Respect $(CC). 2013-10-30 10:04:35 +00:00
jerm - Add DOCS Option 2013-10-02 17:12:26 +00:00
jsdr In preparation for making libtool generate libraries with a sane name, fix all 2013-12-11 15:10:44 +00:00
kb Convert comms to MDOCS and MEXAMPLES. 2014-01-03 16:06:00 +00:00
kermit Convert to OptionsNG and stagify. 2013-10-23 07:36:28 +00:00
kremotecontrol Add NO_STAGE all over the place in preparation for the staging support (cat: comms) 2013-09-20 16:03:29 +00:00
libfec Unbreak on FreeBSD 10. 2014-01-17 12:22:13 +00:00
libimobiledevice None of the binaries installed by comms/libimobiledevice are actually linked 2013-10-31 03:59:57 +00:00
libirman Add NO_STAGE all over the place in preparation for the staging support (cat: comms) 2013-09-20 16:03:29 +00:00
libmodbus Update to version 3.1.1. 2013-11-21 18:35:48 +00:00
libticables2 - Support staging. 2013-10-22 16:02:19 +00:00
libticalcs2 - Support staging. 2013-10-22 16:03:17 +00:00
linrad Convert comms to MDOCS and MEXAMPLES. 2014-01-03 16:06:00 +00:00
lirc - Switch to USES= gmake. 2014-01-26 17:37:03 +00:00
locator - Enable stage 2013-12-30 01:20:55 +00:00
lrzsz - use STAGEDIR 2013-11-22 19:33:41 +00:00
mgetty+sendfax Add NO_STAGE all over the place in preparation for the staging support (cat: comms) 2013-09-20 16:03:29 +00:00
minicom Add patch to fix build, forgotten in previous commit 2014-01-02 19:32:27 +00:00
mlan3 - Stage support 2014-01-20 18:32:19 +00:00
morse In preparation for making libtool generate libraries with a sane name, fix all 2013-12-11 15:10:44 +00:00
nasawash - Enable staging 2013-12-30 21:37:31 +00:00
ncid - Convert to USES=gmake tk 2014-01-29 13:33:39 +00:00
nec2c - Enabled stagedir 2013-12-30 21:59:55 +00:00
nokryptia Fix LIB_DEPENDS 2013-12-20 11:53:44 +00:00
o2sms Add NO_STAGE all over the place in preparation for the staging support (cat: comms) 2013-09-20 16:03:29 +00:00
obexapp - Support staging 2013-09-29 10:45:44 +00:00
openobex - Support staging 2013-09-29 10:44:54 +00:00
p5-Cisco-UCS - add stage support 2014-01-30 10:27:43 +00:00
p5-Device-Gsm - add stage support 2014-01-30 10:27:43 +00:00
p5-Device-Modem Support STAGEDIR. 2013-11-05 12:30:46 +00:00
p5-Device-SerialPort Support STAGEDIR. 2013-11-05 12:30:46 +00:00
p5-Fax-Hylafax-Client Support STAGEDIR. 2013-11-05 12:30:46 +00:00
p5-Nexmo-SMS - add stage support 2014-01-30 10:27:43 +00:00
p5-SMS-Send - add stage support 2014-01-30 10:27:43 +00:00
p5-SMS-Send-DeviceGsm - add stage support 2014-01-30 10:27:43 +00:00
p5-SMS-Send-NexmoUnicode - add stage support 2014-01-30 10:27:43 +00:00
p5-SMS-Send-TW-chtsns - add stage support 2014-01-30 10:27:43 +00:00
p5-SMS-Send-TW-emome - add stage support 2014-01-30 10:27:43 +00:00
p5-SMS-Send-TW-HiAir - add stage support 2014-01-30 10:27:43 +00:00
p5-SMS-Send-TW-PChome - add stage support 2014-01-30 10:27:43 +00:00
p5-SMS-Send-TW-Qma - add stage support 2014-01-30 10:27:43 +00:00
p5-SMS-Send-TW-ShareSMS - add stage support 2014-01-30 10:27:43 +00:00
p5-SMS-Send-TW-Socket2Air - add stage support 2014-01-30 10:27:43 +00:00
p5-SMS-SMS77 Add NO_STAGE all over the place in preparation for the staging support (cat: comms) 2013-09-20 16:03:29 +00:00
pear-Horde_ActiveSync Horde package update: 2014-01-19 13:19:58 +00:00
pear-Horde_SyncMl Stage support for non-IGNORED pear classes 2013-11-25 17:59:58 +00:00
picocom - Modernize the port: uses USES, etc. 2013-12-02 05:42:56 +00:00
pr Add NO_STAGE all over the place in preparation for the staging support (cat: comms) 2013-09-20 16:03:29 +00:00
predict - Add STAGEDIR to port 2013-12-29 00:01:51 +00:00
py-bulksms Convert comms to MDOCS and MEXAMPLES. 2014-01-03 16:06:00 +00:00
py-libimobiledevice - Backport patch to fix build of py-libimobiledevice. 2013-10-14 01:43:16 +00:00
py-lirc In preparation for making libtool generate libraries with a sane name, fix all 2013-12-11 15:10:44 +00:00
py-serial Fix properties on pkg-plist 2014-01-21 23:18:05 +00:00
pyla Add NO_STAGE all over the place in preparation for the staging support (cat: comms) 2013-09-20 16:03:29 +00:00
qico Convert comms to MDOCS and MEXAMPLES. 2014-01-03 16:06:00 +00:00
qpage Reduce over inclusion of bsd.port.mk 2014-01-15 23:22:46 +00:00
qrq - convert to use stage 2013-12-28 04:37:38 +00:00
qsstv Clean up port Makefile and patch sources to respect PREFIX (this also fixes 2014-01-08 08:36:34 +00:00
remserial Use dos2unix USES macro. 2013-12-18 11:57:07 +00:00
rtl-sdr - Update comms/rtl-sdr to 20130913 and bump dependent ports' revisions 2013-10-10 06:16:03 +00:00
rubygem-callsign - Add LICENSE 2013-12-31 10:09:00 +00:00
rubygem-ruby-termios - Add stage support 2013-10-30 02:20:20 +00:00
rxtx Add NO_STAGE all over the place in preparation for the staging support (cat: comms) 2013-09-20 16:03:29 +00:00
scmxx Fix properties on pkg-plist 2014-01-21 23:18:05 +00:00
ser2net - Update to version 2.9.1 2013-11-01 22:01:49 +00:00
serialoverip Support STAGEDIR. 2013-11-18 00:37:15 +00:00
seyon Support STAGEDIR. 2013-11-18 00:37:15 +00:00
smstools3 - Add note in rc script on how to log to syslog 2014-01-30 09:14:15 +00:00
soundmodem - Fix build on 10 2013-12-15 00:50:37 +00:00
spandsp In preparation for making libtool generate libraries with a sane name, fix all 2013-12-11 15:10:44 +00:00
spandsp-devel - Change maintainer email to @FreeBSD.org 2013-11-18 21:17:31 +00:00
splat - Enable stage 2013-12-30 00:34:53 +00:00
sredird Support STAGEDIR. 2013-11-18 00:37:15 +00:00
syncterm Reduce over inclusion of bsd.port.mk 2014-01-15 23:23:32 +00:00
tcpser Convert to USES=dos2unix 2013-11-18 13:45:44 +00:00
thebridge - Fix stagedir 2013-11-04 19:52:36 +00:00
tilp2 - Support staging. 2013-10-22 16:07:24 +00:00
tits Add NO_STAGE all over the place in preparation for the staging support (cat: comms) 2013-09-20 16:03:29 +00:00
tkhylafax - Convert to USES+=tk 2013-10-23 13:15:46 +00:00
tkscanfax Support STAGEDIR. 2013-11-18 00:37:15 +00:00
tlf In preparation for making libtool generate libraries with a sane name, fix all 2013-12-11 15:10:44 +00:00
trustedqsl Finish stage support 2014-01-25 22:30:09 +00:00
twpsk Add NO_STAGE all over the place in preparation for the staging support (cat: comms) 2013-09-20 16:03:29 +00:00
uarduno Add NO_STAGE all over the place in preparation for the staging support (cat: comms) 2013-09-20 16:03:29 +00:00
uartlirc Remove duplicate SSP_UNSAFE that's already set by USES= kmod. 2014-01-26 15:55:43 +00:00
uird Convert comms to MDOCS and MEXAMPLES. 2014-01-03 16:06:00 +00:00
unixcw - Update to latest 3.3.0 2013-12-30 19:41:21 +00:00
usbmuxd In preparation for making libtool generate libraries with a sane name, fix all 2013-12-11 15:10:44 +00:00
usrp - Fix usrp on 10.0 2013-12-25 21:56:00 +00:00
viewfax Add NO_STAGE all over the place in preparation for the staging support (cat: comms) 2013-09-20 16:03:29 +00:00
vrflash - use STAGEDIR 2013-10-27 22:29:46 +00:00
wsjt Python cleanup: 2014-01-13 21:00:02 +00:00
wspr Python cleanup: 2014-01-13 21:00:02 +00:00
wwl - convert to stage 2013-12-28 05:03:44 +00:00
wy60 Fix properties on pkg-plist 2014-01-21 23:18:05 +00:00
xastir In preparation for making libtool generate libraries with a sane name, fix all 2013-12-11 15:10:44 +00:00
xdx Support STAGEDIR. 2013-11-18 00:37:15 +00:00
xlog - Update from 2.0.10 to 2.0.11 2013-11-18 04:45:57 +00:00
xmorse comms/xmorse: Fix build on F10+, support stage 2014-01-25 09:28:51 +00:00
xnecview In preparation for making libtool generate libraries with a sane name, fix all 2013-12-11 15:10:44 +00:00
xwota - Enable stage 2013-12-30 01:03:13 +00:00
yagiuda - Fix under stage 2013-12-30 00:08:15 +00:00
yaps Support STAGEDIR. 2013-11-18 00:37:15 +00:00
yfklog Convert comms to MDOCS and MEXAMPLES. 2014-01-03 16:06:00 +00:00
zmtx-zmrx Add NO_STAGE all over the place in preparation for the staging support (cat: comms) 2013-09-20 16:03:29 +00:00
zssh Support STAGEDIR. 2013-11-18 00:37:15 +00:00
Makefile - Keep category Makefiles sorted 2014-01-28 03:25:28 +00:00