cpet/freebsd-ports
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2d3fa03334
freebsd-ports/CHANGES
Marcus von Appen 78b8b9e4ba New USES=uniquefiles to make files or directories unique 
by adding a prefix or suffix to them.

Files listed in UNIQUE_PREFIX_FILES will receive the prefix
set via UNIQUE_PREFIX. The same applies to UNIQUE_SUFFIX_FILES,
but with the chosen UNIQUE_SUFFIX. UNIQUE_PREFIX and
UNIQUE_SUFFIX are set to PKGNAMEPREFIX and PKGNAMESUFFIX by
default.
The uniquefiles USES enables ports to name files in special
ways, e.g. by outlining that the port does not support X11
(-nox11). A binary named bin/foo thus can be easily renamed
to bin/foo-featureA via

USES=                 uniquefiles
UNIQUE_SUFFIX=        -featureA
UNIQUE_SUFFIX_FILES=  bin/foo

The uniquefiles USES automatically adjusts the plist at
installation time. There is no need to consider the prefix
or suffix in the pkg-plist file itself. If the original name
of the renamed file is bin/foo, this exact name should be put
into pkg-plist.

The dirs argument to USES=uniquefiles will cause certain
standard directories, such as DOCSDIR or EXAMPLESDIR to be
prepended with the UNIQUE_PREFIX. The change to the directories
will hapen prior to configuring or building the port, so that
the port Makefile as well as the port's build logic are aware
of the changed name.

Since the uniquefiles USES effectively manipulates the port's
installation and file layout, it will only be available for
stagedir-aware ports. Ports with NO_STAGE=yes will be unable
to use the uniquefiles USES.

Reviewed by:	portmgr@
Approved by:	portmgr@
2014-01-11 16:52:34 +00:00

2307 lines
80 KiB
Plaintext
Raw Blame History

Updating Information for FreeBSD ports developers
This file is maintained by portmgr@FreeBSD.org and copyrighted by the
FreeBSD Foundation.
This file contains major changes to ports and the ports infrastructure.
Intended audience are ports committers, maintainers and other
developers. User oriented changes should be submitted for inclusion
in the release notes and/or placed into UPDATING.
All ports committers are allowed to commit to this file.
20140111:
AUTHOR: mva@FreeBSD.org
New USES=uniquefiles to make files or directories unique
by adding a prefix or suffix to them.
Files listed in UNIQUE_PREFIX_FILES will receive the prefix
set via UNIQUE_PREFIX. The same applies to UNIQUE_SUFFIX_FILES,
but with the chosen UNIQUE_SUFFIX. UNIQUE_PREFIX and
UNIQUE_SUFFIX are set to PKGNAMEPREFIX and PKGNAMESUFFIX by
default.
The uniquefiles USES enables ports to name files in special
ways, e.g. by outlining that the port does not support X11
(-nox11). A binary named bin/foo thus can be easily renamed
to bin/foo-featureA via
USES= uniquefiles
UNIQUE_SUFFIX= -featureA
UNIQUE_SUFFIX_FILES= bin/foo
The uniquefiles USES automatically adjusts the plist at
installation time. There is no need to consider the prefix
or suffix in the pkg-plist file itself. If the original name
of the renamed file is bin/foo, this exact name should be put
into pkg-plist.
The dirs argument to USES=uniquefiles will cause certain
standard directories, such as DOCSDIR or EXAMPLESDIR to be
prepended with the UNIQUE_PREFIX. The change to the directories
will hapen prior to configuring or building the port, so that
the port Makefile as well as the port's build logic are aware
of the changed name.
Since the uniquefiles USES effectively manipulates the port's
installation and file layout, it will only be available for
stagedir-aware ports. Ports with NO_STAGE=yes will be unable
to use the uniquefiles USES.
20131218:
AUTHOR: mva@FreeBSD.org
lang/python (and as such the 'python' binary and accomplices)
has been removed as default dependency for the USE_PYTHON,
USE_PYTHON_BUILD and USE_PYTHON_RUN knobs.
Ports need to use a designated (default) python interpreter
to build and install and in most cases for execution in the user
environment. Ports that install python scripts, which are not
limited to a certain python version (or version range), can
include lang/python as build and/or run dependency.
USE_PYTHON=yes and similar knobs will only pull in the
default python version (e.g. lang/python27), but none
of the meta ports or lang/python itself.
Please use lang/python as build or run-time dependency only,
if there is no other way to get a port working properly, since
the usage of lang/python complicates package builds for different
python versions.
20131213:
AUTHOR: tijl@FreeBSD.org
New USES=fortran to replace USE_FORTRAN.
USE_FORTRAN=yes can be replaced with USES=fortran or USES=fortran:gcc.
USE_FORTRAN=ifort can be replaced with USES=fortran:ifort.
USE_FORTRAN=f77 is deprecated and the version of gcc it depends
on (lang/gcc34) is scheduled to be removed.
Note that USE_FORTRAN=yes also makes GCC the C/C++ compiler while
USES=fortran only sets the Fortran compiler and can be used together
with Clang as C/C++ compiler.
20131208:
AUTHOR: mva@FreeBSD.org
New USES=twisted, to replace the old USE_TWISTED knob.
twisted can be configured with the arguments run or build to replace
the previous USE_TWISTED_RUN and USE_TWISTED_BUILD knobs. The twisted
components can be added as comma-separated arguments. If you previously
wrote
USE_TWISTED= yes
USE_TWISTED= conch names
USE_TWISTED_RUN= yes
you now would write
USES= twisted
USES= twisted:conch,names
USES= twisted:run
20131119:
AUTHOR: kwm@FreeBSD.org
The USE_GNOME component ltverhack no longer has a hard dependancy on
libtool.
If USE_AUTOTOOLS=libtool isn't defined it will try to patch ltmain.sh
and or libtool in ${WRKSRC}. If those files are located somewhere else
in ${WRKSRC} then it is possible to overwrite ltverhack_PATCH_FILES
with there new locations. configure script --distable-static will work also
after using the "new" ltverhack.
Please keep in mind that USE_AUTOTOOLS implies GNU_CONFIGURE so you might
need to add that back for the port to work.
20131031:
AUTHOR: rene@FreeBSD.org
Add a new USES for kernel module ports.
USES=kmod takes no arguments and:
- adds kld to CATEGORIES
- sets SSP_UNSAFE
- sets IGNORE if the kernel sources are not found
- defines KMODDIR to /boot/modules by default, add it to
PLIST_SUB and MAKE_ENV, and create it upon installation
- handles cross-referencing kernel modules upon installation and
deinstallation
20131021:
AUTHOR: amdmi3@FreeBSD.org
share/applications directory was added to the mtree, meaning that
you no longer need to create or remove it in your ports.
20131008:
AUTHOR: bapt@FreeBSD.org
New "compiler" USES to be able to select the compiler based on the
features it provides.
Supported arguments are:
- c++11-lang: the port needs a c++11 aware compiler what ever standard
library it uses, implies features
- c++11-lib: the port needs a c++11 standard library, implies features
- c11: the ports needs a c11 aware compiler implies features
- features: this will create a COMPILER_FEATURES variable which contains
the list of features ${CC} do support, implies env.
- env: the COMPILER_TYPE will be set to either gcc or clang.
By default the uses will try to use clang33 from ports when nothing in
base is relevant except if the user explicitly defines
FAVORITE_COMPILER=gcc in his make.conf
20131008:
AUTHOR: makc@FreeBSD.org
New USES: qmake, configure tool widely used among Qt based projects.
New framework is stage-friendly. To convert existing ports remove
custom configure target, adjust QMAKE_ENV, QMAKE_ARGS, QMAKE_PRO if
required (see Mk/Uses/qmake.mk for details).
20131005:
AUTHOR: bdrewery@FreeBSD.org
PATCHFILES now support an optional :-pX flag that notes which patch strip
level to use. This allows multiple patches in 1 port to use different
PATCH_DIST_STRIP values without changing PATCH_DIST_STRIP.
Syntax: PATCHFILES= patch[:-pX][:distgroup]
20131003:
AUTHOR: bapt@FreeBSD.org
New USES: scons, to handle properly the scons building system, this
this also gives the scons packages user the ability to respect MAKE_JOBS.
20130924:
AUTHOR: bapt@FreeBSD.org
Stage aware ports can now create package without the requirement from
being root.
If a port really needs root anyway it should add NEED_ROOT in its
Makefile.
For a port that needs special credential on files DO NOT RELY on
chown in post-install section but rely on @own, @group in pkg-plist
Be careful about rights on directories as pkg_install cannot store them
they needs to be done via @exec chown.
20130923:
AUTHOR: bapt@FreeBSD.org
The ports tree is now staged by default. With pkgng the sequence hasn't
changed, the main difference is that creating package is now independent
from installing it. With pkg_install, the package is now created first
and make install, do install the package.
New macros:
- STAGEDIR: PATH to the directory where the port will be staged.
- NO_STAGE: Keep the old behaviour of the ports tree (aka no staging area)
Unsupported macro if NO_STAGE is not set:
- MAN* with staging man page compression and handling of hardlinks and
symlinks is automatically done in the stage. the manpages becomes then a
"normal" plist files and should be tracked in pkg-plist.
- MANCOMPRESSED the compress-man target is able to only compress when it
needed.
New target:
- stage: this installs everything into the stage directory
- makeplist: this will create a pkg-plist and print it to stdout. This is
a sample plist and it should always be _reviewed_ not directly used.
NOTE: with staging only what is in the plist will be installed, nothing more,
meaning a port staged cannot have leftovers except directories left. It is
really important to double check the pkg-plist to make sure all the files
the maintainer wants to package are in! make makeplist can help in that area.
20130923:
AUTHOR: mva@FreeBSD.org
* New USES: zope
This replaces the previous USE_ZOPE knob. All other zope related knobs
for port Makefiles still exist. See Mk/Uses/zope.mk for details.
20130920:
AUTHOR: bdrewery@FreeBSD.org
SSP support has been added to ports with WITH_SSP_PORTS for i386 and amd64
on FreeBSD 10, and amd64 on earlier versions.
SSP_UNSAFE is added to disable in a port if it fails to build, but
this should only be used in rare circumstances such as kernel modules.
Otherwise, the port may just be failing due to lack of respecting
LDFLAGS.
On FreeBSD 10, this uses an ldscript in /usr/lib/libc.so to pull in
libssp_nonshared.a to address issues linking on i386 [1].
On earlier FreeBSD versions the WITH_SSP_PORTS knob will add -lssp_nonshared
to LDFLAGS on i386. This is not needed on amd64. However, several hundred
ports do not currently respect LDFLAGS, so this support is disabled currently
as it causes build failures if a dependency is looking for the stack_chk
symbols.
[1] http://svnweb.freebsd.org/base/head/lib/libc/libc.ldscript?revision=251668&view=markup
20130919:
AUTHOR: gahr@FreeBSD.org
* New USES: tcl, tk
This uses replaces all the previous USE_TCL, USE_TCL_BUILD, USE_TCL_RUN,
USE_TCL_WRAPPER, USE_TK, USE_TK_BUILD, USE_TK_RUN and USE_TK_WRAPPER macros.
See the Mk/Uses/tcl.mk and the commit message of r327607 for details.
Moreover, the default Tcl/Tk version is now specified in terms of
bsd.default-versions.mk. It is now possible to specify one's preferred Tcl/Tk
version using DEFAULT_VERSIONS+= tcltk=x.y in make.conf.
20130918:
AUTHOR: bapt@FreeBSD.org
The perl framework is not included unconditionally and the old framework
is not recognized anymore, the following MACROS has been removed:
* PERL_CONFIGURE
* USE_PERL5_RUN
* USE_PERL5_BUILD
* PERL_MODBUILD
20130904:
AUTHOR: madpilot@FreeBSD.org
To allow ports to work with the iconv implementation in 10-CURRENT after
commit r254273 the USES=iconv options now conditionally adds a dependency
depending on the FreeBSD version. It also defines a few utility variables
which can be used in the ports:
ICONV_CMD: location of the iconv binary.
after r254273: /usr/bin/iconv
before: ${LOCALBASE}/bin/iconv
ICONV_LIB: ld(1) flags to get the iconv DSO.
after r254273: empty
before: -liconv
ICONV_CONFIGURE_ARG: String that can be passed to configure
scripts to hint the location of the libiconv library.
after r254273: empty
before: --with-libiconv-prefix=${LOCALBASE}
20130902:
AUTHOR: bapt@FreeBSD.org
USE_GNOME=pkgconfig is not supported anymore by the ports tree, please
uses: USES=pkgconfig
20130831:
AUTHOR: bdrewery@FreeBSD.org
crees has added USE_PACKAGE_DEPENDS_ONLY which works like
USE_PACKAGE_DEPENDS but will not fallback on source if a
package is missing.
20130731:
AUTHOR: bapt@FreeBSD.org
* New USES: perl5
This uses replaces all the previous perl macros. Here is how to migrate:
Always include perl5:
USES= perl5
If USE_PERL5 is undefined then perl5 will be a build and run dependency
Migrating to new USE_PERL5:
=======================================================
| BEFORE | AFTER |
=======================================================
| PERL_CONFIGURE=yes | USE_PERL5= configure |
-------------------------------------------------------
| USE_PERL5_RUN=yes | USE_PERL5=run |
-------------------------------------------------------
| USE_PERL5_BUILD=yes | USE_PERL5=build |
-------------------------------------------------------
| PERL_MODBUILD=yes | USE_PERL5=modbuild |
-------------------------------------------------------
| USE_PERL5=yes | |
-------------------------------------------------------
| USE_PERL5=5.14+ | USE_PERL5= 5.14+ |
-------------------------------------------------------
| PERL_CONFIGURE= 5.14+ | USE_PERL5=5.14+ configure |
-------------------------------------------------------
| PERL_MODBUILD= 5.14+ | USE_PERL5=5.14+ modbuild |
-------------------------------------------------------
20130726:
AUTHOR: rene@FreeBSD.org
* With the removal of QT 3/KDE 3, the following are no longer recognized:
- USE_KDEBASE_VER
- USE_KDELIBS_VER
- USE_QT_VER
Mk/bsd.kde.mk has been removed, it was only used for QT 3/KDE 3.
20130628:
AUTHOR: bapt@FreeBSD.org
* New USES: imake
This uses replaces USE_IMAKE, it handles dependency on imake. Its only argument
is 'env', which prevent from defining the do-configure target.
* New LATE_INSTALL_TARGET
This content of this new macro is appended to INSTALL_TARGET
20130620:
AUTHOR: bapt@FreeBSD.org
* New USES: fmake
This uses will allow to build ports using the legacy FreeBSD make, for ports
not compatible with bmake
20130614:
AUTHOR: bapt@FreeBSD.org
* New macros to help dealing with ports that have options:
OPTIONS_SUB=yes when set in a port, all the option names are automatically
added to the PLIST_SUB with "@comment " value in case the option is off and
empty value in case the options is on.
${OPT}_CONFIGURE_ENABLE=<aname> will automatically add:
CONFIGURE_ARGS+=--enable-<aname> in case OPT is activated
CONFIGURE_ARGS+=--disable-<aname> in case OPT is deactivated
${OPT}_CONFIGURE_ON=<something> will automatically add:
CONFIGURE_ARGS+=<something> in case OPT is activated
${OPT}_CONFIGURE_OFF=<something> will automatically add:
CONFIGURE_ARGS+=<something> in case OPT is deactivated
${OPT}_CFLAGS will append the specified new flags to CFLAGS if OPT is 'on'
${OPT}_CXXFLAGS will append the specified new flags to CXXFLAGS if OPT is 'on'
${OPT}_LDFLAGS will append the specified new flags to LDFLAGS if OPT is 'on'
${OPT}_CONFIGURE_ENV will append the specified variables to CONFIGURE_ENV if
OPT is 'on'
${OPT}_MAKE_ENV will append the specified variables to MAKE_ENV if OPT is 'on'
${OPT}_USES will append the speficied uses to USES if OPT is 'on'
${OPT}_DISTFILES will append the specified distiles to DISTFILES if OPT in 'on'
${OPT}_CMAKE_ON=<something> will automatically add:
CMAKE_ARGS+=<something> in case OPT is activated
${OPT}_CMAKE_OFF=<something> will automatically add:
CMAKE_ARGS+=<something> in case OPT is deactivated
${OPT}_${TYPE}_DEPENDS=<something> will automatically add:
${TYPE_DEPENDS}+=<something> in case OPT is 'on'
20130614:
AUTHOR: bapt@FreeBSD.org
* New 'display' USES macro to handle building ports that may require a
a display to build.
USES= display[:install] will start Xvfb and set the DISPLAY environment
variable before the installation phase and stop it at the end. (install is
the implicit value)
USES= display:build will start Xvfb and set the DISPLAY environment variable
before the build phase and stop it at the end.
20130607:
AUTHOR: bdrewery@FreeBSD.org
* Checks were added to block GH_TAGNAME=master as this is not a valid
setup. A known hash or tag should be used for GH_TAGNAME instead of
a branch name. As soon as a branch is updated, the known checksum
in the distinfo would then be invalid.
20130606:
AUTHOR: bdrewery@FreeBSD.org
* WRKSRC_SUBDIR has been added to simplify overriding WRKSRC
to use a subdirectory:
WRKSRC= ${WRKDIR}/${DISTNAME}/src
Becomes:
WRKSRC_SUBDIR= src
20130606:
AUTHOR: bapt@FreeBSD.org
The OPTIONS macro is no longer recognized, please use the new options
framework.
20130509:
AUTHOR: kwm@FreeBSD.org
* Two new USES macros to handle mime data of ports.
USES= desktop-file-utils
Handles MimeType in .desktop files that are installed in
share/applications.
USES= shared-mime-info
For supporting mime xml files installed in
share/mime/packages.
The desktop-file-utils USES is only needed if the .desktop files
installed by the port has a MimeType field.
USE_GNOME=desktopfileutils is deprecated.
The shared-mime-info USES handles mime types xml files.
Please note that only the packages/${NAME}.xml file should be listed in
the plist. The shared-mime-info port will clean up the share/mime/*
directories and generated files.
Both USES have there own post-install and code that adds @exec/@unexec
lines to the pkg-plist. This means that when a port switches to the
USES macro, the related post-install command and @exec/@unexec
lines can be removed from the prot.
20130507:
AUTHOR: bapt@FreeBSD.org
* New USES macro to handle setting correct shebang to scripts
By default it will fix bash, perl, php, ruby and python on all files specified
in the SHEBANG_FILES macro (glob pattern relative to ${WRKSRC})
Paths can be customized, and number of languages supported can be extended.
* USE_GETTEXT, USE_NCURSES, USE_READLINE are no longer recognized
20130506:
AUTHOR: bapt@FreeBSD.org
* New USES macro to handle linking on ncurses and on readline
USES= ncurses will set env and make the port link to base version of ncurses
if no port version is installed otherwise it will link against port version
USES= ncurses:port will for the port to link against the ports version of
ncurses
USES= ncurses:base will force to link against base version of ncurses.
USES= readline will make the port link against base version of readline except
on 10+ where it will force dependency on the port version of readline
USES= readline:port will anyway force dependency on the port version of
readline.
20130426:
AUTHOR: mva@FreeBSD.org
* USE_ICONV has been deprecated and converted into the iconv USE
feature
USES= iconv
20130425:
AUTHOR: bapt@FreeBSD.org
* USE_CDRTOOLS is no longer recognized
* USE_FREETYPE is no longer recognized
20130423:
AUTHOR: jgh@FreeBSD.org
* New USES macro to handle support for gettext dependency:
USES= gettext:build will add gettext into BUILD_DEPENDS
USES= gettext:run will add gettext into RUN_DEPENDS
USES= gettext:lib will add gettext into LIB_DEPENDS
It deprecates USE_GETTEXT which will be removed as soon as it is not
used anymore
20130422:
AUTHOR: bdrewery@FreeBSD.org
* The entry for 20120830 to change CCACHE_DIR was not fully supported
by all ports. There is now a CCACHE_DIR variable that can be used
in /etc/make.conf for more complete coverage:
CCACHE_DIR=/var/cache/ccache
20130422:
AUTHOR: bapt@FreeBSD.org
* New USES macro to handle support for pkgconf (pkg-config) dependency:
USES= pkgconfig[:build] will add pkgconf into BUILD_DEPENDS
USES= pkgconfig:run will add pkgconf into RUN_DEPENDS
USES= pkgconfig:both will add pkgconf into both RUN and BUILD DEPENDS
It deprecates USE_PKGCONFIG which will be removed as soon as it is not
used anymore
20130320:
AUTHOR: jgh@FreeBSD.org
* New USES macro to handle support for Zenoss ports and Zenpacks:
USES= zenoss
20130319:
AUTHOR: makc@FreeBSD.org
* New USES macro should be used instead of deprecated USE_CMAKE and
CMAKE_OUTSOURCE:
USES= cmake:outsource
to perform out-of-source build (equivalent to former pair usage of
USE_CMAKE/CMAKE_OUTSOURCE)
USES= cmake
In-source build (equivalent to plain USE_CMAKE=yes) can be used if
project doesn't support out-of-source build.
20130319:
AUTHOR: bapt@FreeBSD.org
* The options framework now uses ports-mgmt/dialog4ports contributed by
Ilya A. Arkhipov. It boostraps it if not present when one calls
make config.
dialog4ports provides a new UI able to represent all the features
provided by the new options framework.
20130315:
AUTHOR: bdrewery@FreeBSD.org
* USE_QMAIL_RUN, USE_QMAIL_BUILD and WANT_QMAIL have been removed
and converted into the qmail USE feature
USES= qmail:run will add qmail into RUN_DEPENDS
USES= qmail:build will add qmail into BUILD_DEPENDS
USES= qmail[:both] will add qmail into both RUN and BUILD DEPENDS
USES= qmail:vars will set QMAIL_PREFIX
20130315:
AUTHOR: bapt@FreeBSD.org
* Add new Keywords directory and first info.yaml keyword (@info).
Keywords directory will contain all the custom plist keywords allowing to
extend pkg-plist with new keywords. Only works with pkgng.
20130307:
AUTHOR: bapt@FreeBSD.org
* New USES macro to handle on demand features, 2 examples has been added to
the ports tree:
pathfix: to replace USE_GNOME= gnomehack
fuse: to replace USE_FUSE= yes
20130207:
AUTHOR: gahr@FreeBSD.org
* Use of PTHREAD_CFLAGS and PTHREAD_LIBS is unsupported. The former
expands to the empty string, while the second is simply -pthread.
Please use -pthread directly in your LDFLAGS, if needed.
20121214:
AUTHOR: flo@FreeBSD.org
* Add a USE_FUSE macro to handle fuse dependencies. It makes
sure sysutils/fusefs-libs gets installed and depending on
fuse being in base or not it installs sysutils/fusefs-kmod.
20121210:
AUTHOR: bapt@FreeBSD.org
* OPTIONS has been extended 2 new macros are available:
OPTIONS_RADIO - allows only 0 or 1 options to be selected
OPTIONS_GROUP - allows 0 or N options among to be selected
20121010:
AUTHOR: bapt@FreeBSD.org
* IPV6 option is now activated by default for the whole ports tree
20121010:
AUTHOR: bapt@FreeBSD.org
* The ports tree is now using pkgng as the default package manager
for HEAD. This only affects users of CURRENT -- users of other
branches need not take any action.
To keep pkg_install as the default package manager, use the new
WITHOUT_PKGNG knob in make.conf
20120830:
AUTHOR: beat@FreeBSD.org
* CCACHE support for building ports has been added (depends on
devel/ccache). Therefore new user settable variables are available:
WITH_CCACHE_BUILD - Enable CCACHE support (Default off)
NO_CCACHE - Disable CCACHE support for example for certain
ports if CCACHE is enabled.
By default CCACHE uses $HOME/.ccache as cache directory. To use
a non-default cache directory this could be overwritten like:
MAKE_ENV+= CCACHE_DIR=/var/cache/ccache
20120820:
AUTHOR: gahr@FreeBSD.org
* GitHub support has been integrated into bsd.sites.mk. In order to
fetch distfiles from GitHub, a port must define USE_GITHUB along
with the following variables:
GH_ACCOUNT - account name of the GitHub user hosting the project
default: not set, mandatory
GH_PROJECT - name of the project on GitHub
default: ${PORTNAME}
GH_TAGNAME - name of the tag to download (master, 2.0.1, ...)
default: ${DISTVERSION}
GH_COMMIT - first 7 digits of the commit that generated GH_TAGNAME
(man git-describe(1))
default: not set, mandatory
The port www/tivoka is an example how to use this mechanism.
20120726:
AUTHOR: bapt@FreeBSD.org
* new macro USE_PKGCONFIG has been introduce in place of
USE_GNOME= pkgconfig
USE_PKGCONFIG= yes and USE_PKGCONFIG= build
for build only dependency
USE_PKGCONFIG= run
for run only dependency
USE_PKGCONFIG= both
for both build and run dependency
20120715:
AUTHOR: beat@FreeBSD.org
* The ports tree moved from CVS to Subversion. A Subversion to
CVS exporter is in place to continue the support of CVSup but
do not commit to pcvs directly.
All commits have to be done in the new port Subversion repository
on svn.FreeBSD.org. You will find more information about
Subversion in the Ports Subversion Primer in the FreeBSD wiki,
in the "Committer's Guide" and the "Porter's Handbook".
If you are in doubt or unsure about a Subversion operation
please contact ports@FreeBSD.org.
20120529:
AUTHOR: crees@FreeBSD.org
* OPTIONS has been updated with many changes and improvements.
Old-style OPTIONS declarations will continue to work for a while,
but do not introduce any into existing or new ports.
For further information, see the Porter's Handbook section on
Makefile Options.
20110923:
AUTHOR: amdmi3@FreeBSD.org
* LDFLAGS is now passed to both the configure and make environments,
and should be handled just like CPPFLAGS (see previous entry).
Summarizing both LDFLAGS and CPPFLAGS changes, where you would
have used
CONFIGURE_ENV= CPPFLAGS="-I${LOCALBASE}/include" \
LDFLAGS="-L${LOCALBASE}/lib"
MAKE_ENV= CPPFLAGS="-I${LOCALBASE}/include" \
LDFLAGS="-L${LOCALBASE}/lib"
now just use
CPPFLAGS+= "-I${LOCALBASE}/include"
LDFLAGS+= "-L${LOCALBASE}/lib"
Note that it's advised to append these variables (+=) instead
of overriding (=) to allow customization by user.
20110320:
AUTHOR: gerald@FreeBSD.org
* CPPFLAGS is now passed to both the configure and make environments,
so this no longer needs to happen in individual ports by adding this
to CONFIGURE_ENV or MAKE_ENV. Rather, just set CPPFLAGS in the port
Makefile (if necessary).
For example, where you would have used
CONFIGURE_ENV= CPPFLAGS="-I${LOCALBASE}/include"
MAKE_ENV= SOMETHING=foo CPPFLAGS="-I${LOCALBASE}/include"
now just use
CPPFLAGS= "-I${LOCALBASE}/include"
MAKE_ENV SOMETHING=foo
20100831:
AUTHOR: autotools@FreeBSD.org
* USE_GETTEXT has been cleaned up.
'build' BUILD time dependency only
'run' RUN time dependency only
'yes' LIBRARY dependency
20100606:
AUTHOR: gerald@FreeBSD.org
* USE_GCC=4.3 is deprecated (and no port uses it anymore). USE_GCC=4.3+
is transparently rewritten to USE_GCC=4.4+ and lang/gcc43 will be
disconnected from the USE_GCC infrastructure soon.
20100524:
AUTHOR: alepulver@FreeBSD.org
* The license support files (bsd.licenses.mk and bsd.licenses.db.mk) from
GSoc 2008/2009 have been committed. A new PH entry will be available
soon, but for the moment look at:
http://wiki.freebsd.org/PortsLicenseInfrastructure
Or, alternatively, the comments at the beginning of the mentioned files.
20090906:
AUTHOR: flz@FreeBSD.org
* There is now a unified way to create users and groups
in your ports. First, make sure they are added to both
ports/GIDs and ports/UIDs, then add the following in
your port:
USERS= foo
GROUPS= foo
... if you want your port to create the foo user and
group.
20090812:
AUTHOR: portmgr@FreeBSD.org
* sourceforge.net has changed their URL layout to be more
flexible for their users. A new bsd.sites.mk macro SFP
has been added for projects that moved from
http://${mirror}/sourceforge/%SUBDIR%/
to
http://${mirror}/project/%SUBDIR%/
Note that %SUBDIR% is now highly individual for each
project and might need changing as well.
20090521:
AUTHOR: portmgr@FreeBSD.org
* bsd.port.options.mk is now clear to be widely used.
20090516:
AUTHOR: pgollucci@FreeBSD.org
* APACHE_COMPAT is dead!
* USE_APACHE=yes is dead!
* WITH_APACHE13, WITH_APACHE2, WITH_APACHE20, and WITH_APACHE22 are dead
You should set USE_APACHE=13|20|22+. WITH_APACHE option can
be used to conditional include support for ANY version of
Apache based on APACHE_PORT. Currently www/apache13
20090207:
AUTHOR: pgollucci@FreeBSD.org
* devel/libslang dropped in favor of devel/libslang2
* WITH_SLANG2 has been removed. WITH_SLANG now implies
devel/libslang2.
20080905:
AUTHOR: hrs@FreeBSD.org
* print/ghostscript-* and related ports have been renamed in the
following way:
print/ghostscript-gnu -> print/ghostscript7
print/ghostscript-gnu-nox11 -> print/ghostscript7-nox11
print/ghostscript-gnu-commfont -> print/ghostscript7-commfont
print/ghostscript-gpl -> print/ghostscript8
print/ghostscript-gpl-nox11 -> print/ghostscript8-nox11
japanese/ghostscript-gnu-jpnfont -> print/ghostscript7-jpnfont
korean/ghostscript-gnu-korfont -> print/ghostscript7-korfont
* USE_GHOSTSCRIPT now supports a version number which the port
requires. The valid value is "7" or "8". If other value is
specified, value of WITH_GHOSTSCRIPT_VER is used.
* WITH_GHOSTSCRIPT_GNU has been removed in favor of
WITH_GHOSTSCRIPT_VER. The valid value of WITH_GHOSTSCRIPT_VER is
"7" or "8", and the default value is "8".
20080821:
AUTHOR: rafan@FreeBSD.org
* CONFIGURE_ARGS is updated to use correct syntax for newer autoconf
on the configure target. Individual ports no longer need to change
CONFIGURE_TARGET to have the '--build=' prefix.
20080721:
AUTHOR: pav@FreeBSD.org
* Default OpenLDAP version was changed from 2.3 to 2.4.
* USE_GTK and USE_XPM variables are no longer recognized.
20080523:
AUTHOR: flz@FreeBSD.org
* By default, ports-mgmt/pkg_install now sets up a wrapper to use ports
pkg_install (when installed) instead of base when the former is more
recent. This can be disabled in the options menu, or with the
WITHOUT_WRAPPER knob.
20080414:
AUTHOR: pav@FreeBSD.org
* @rmtry is now supported in pkg-plist.
* USE_DISPLAY made more powerful, see comments in bsd.port.mk for details.
* ${PW} is now defined.
* LIB_DEPENDS can now be used with libraries with + sign in their name
without the need for escaping.
20080312:
AUTHOR: pav@FreeBSD.org
* USE_XPM no longer implies USE_XLIB.
* USE_LDCONFIG can now be used to Linux binary ports that install shared
libraries instead of INSTALLS_SHLIB.
20070908:
AUTHOR: gabor@FreeBSD.org, linimon@FreeBSD.org
* The Perl-related code parts have been extracted from bsd.port.mk to
bsd.perl.mk. This includes the user-settable knobs (e.g. USE_PERL5)
and infrastructure parts of the code, like default targets. The new
code is designed to be conditionally included based on either
USE_PERL5_*, PERL_CONFIGURE, or PERL_MODBUILD being set. However,
some of the default settings remain in bsd.port.mk while we make
sure that all ports comply with this.
* A convenient version handling has been implemented for Perl-related
knobs. With this new feature one can require a minimal, a maximal or an
exact version, that the given port needs. For the full description and
some examples, please see the documentation in bsd.perl.mk.
20070804:
AUTHOR: gabor@FreeBSD.org
The following functional changes were made to bsd.*.mk and to
Tools/scripts/security-check.awk:
* The variable definitions that cover command line tools, e.g. MKDIR, were
extracted from bsd.port.mk into bsd.commands.mk, so that we can
reuse them within the infrastructure later.
* The old DESTDIR implementation was removed both from the infrastructure,
and from the individual ports. Variables like TARGETDIR should not longer
be used.
* A new DESTDIR implementation has been added, implemented in bsd.destdir.mk.
The new implementation puts no requirements on the individual ports.
20070730:
AUTHOR: python@FreeBSD.org
* The default Python version has been changed from 2.4.x to 2.5.x.
* A number of variables have been added to bsd.python.mk to support
the more integrated support for Python eggs, including:
PYDISTUTILS_PKGNAME, PYDISTUTILS_PKGVERSION, PYEASYINSTALL_EGG,
PYDISTUTILS_NOEGGINFO, PYDISTUTILS_EGGINFO, PYEASYINSTALL_ARCHDEP
* More detailed descriptions of the variables can be found in the comments
in bsd.python.mk.
20070723:
AUTHOR: rafan@FreeBSD.org
* The default CONFIGURE_ARGS when GNU_CONFIGURE is set now contains
--mandir and --infodir if configure script supports them.
20070712:
AUTHOR: maho@FreeBSD.org
* Add knob USE_FORTRAN for ports which uses FORTRAN. All ports uses
FORTRAN compiler should use this knob. Usages are: USE_FORTRAN=yes
(default;gfortran42), USE_FORTRAN=ifc (Intel FORTRAN compiler)
and USE_FORTRAN=g77 (/usr/bin/f77 or g77-34).
20070701:
AUTHOR: portmgr@FreeBSD.org
The following change was made to the ports infrastructure:
* Virtual category 'kld' was added. If the port installs kernel loadable
modules, it should be included in this category.
20070524:
AUTHOR: portmgr@FreeBSD.org
The following changes were made to the ports infrastructure:
* The 'make-deinstall-all' target now checks for moved ports.
* The installation directories PORTEXAMPLES and PORTDATA are now defined.
* The USE_MAKESELF knob is added for ports that use the makeself archiver.
* The description of fetch-list was updated. The targets fetch-required-list,
fetch-url-list, and fetch-urlall-list were added.
* 'make search' will also now search in ports/MOVED.
* The default method for 'make update' is now portsnap. Previously,
you had to manually select one of 3 methods: SUP_UPDATE, CVS_UPDATE,
or PORTSNAP_UPDATE. The latter is now obsolete.
* Several Makevar definitions have been moved to the pre-makefile section:
DATADIR, DOCSDIR, ETCDIR, EXAMPLESDIR, WWWDIR.
20070403:
AUTHOR: portmgr@FreeBSD.org
The following changes were made to the ports infrastructure:
* The default dependency of USE_GHOSTSCRIPT has been changed from
ghostscript-gnu to ghostscript-gpl. The WITH_GHOSTSCRIPT_GPL variable is
now no-op. New WITH_GHOSTSCRIPT_GNU variable was added.
* bsd.tcl.mk was overhauled. Most importantly, the semantics of USE_TCL* and
USE_TK* variables was changed. USE_TCL and USE_TK now implies both build
and run dependencies, USE_TCL_RUN and USE_TK_BUILD variables were
introduced. Existing ports in the tree were modified.
* Unused category 'tcl81' was removed, and new categories 'tcl' and 'tk'
were added.
20070324:
AUTHOR: portmgr@FreeBSD.org
The following changes were made to the ports infrastructure:
* Default LIBTOOLFILES value was changed from literal `configure'
to ${CONFIGURE_SCRIPT}.
* bsd.efl.mk was moved to ports/Mk. USE_EFL family of macros is now
generally available to all ports.
* New macros COPYTREE_BIN and COPYTREE_SHARE were added, to allow
for easy installation of a tree hierarchy, either with executable (bin)
or read-only (share) permissions on files.
* A new variable WWWDIR was added, with default value of
${PREFIX}/www/${PORTNAME}.
* Variables DOCSDIR_REL, DATADIR_REL, EXAMPLESDIR_REL and WWWDIR_REL were
added for porter's convenience. They contain the values of their
respective non-REL variables, except relative to installation PREFIX.
20070313:
AUTHOR: portmgr@FreeBSD.org
The following changes were made to the ports infrastructure:
* bsd.ocaml.mk and bsd.xfce.mk were added.
* The FETCH_CMD was refactored so that ports can override the command,
the arguments, or both.
20070306:
AUTHOR: portmgr@FreeBSD.org
The following changes were made to the ports infrastructure:
* The remaining vestiges of FreeBSD 4.X support were removed. Any
remaining users of 4.X should have stayed with the RELEASE_4_EOL tag.
* It is now possible to include USE_PHP after bsd.port.pre.mk.
* 'make search' should now work with non-default ${PORTSDIR}.
20070130:
AUTHOR: portmgr@FreeBSD.org
The following changes were made to the ports infrastructure:
* DEPENDS variable was removed, please use other *_DEPENDS variables instead.
* A new pkg-plist keyword is available, @stopdaemon. It will call forcestop
on all rc.subr scripts installed by the port on deinstall, effectively
stopping services on deinstall/upgrade.
* rc.subr script suffix is now available in Makefile as RC_SUBR_SUFFIX.
* New variable USE_CDRTOOLS was introduced. It replaced direct dependencies
on sysutils/cdrtools port. It now automatically support switching to
cdrtools-cjk port when user specified WITH_CJK. All ports were converted.
* USE_DOS2UNIX, infrastructure for converting DOS to UNIX line feeds, was
enhanced by a new variable DOS2UNIX_REGEX. It allows to specify a find
-iregex parameter to limit touched files by file extensions.
* Support for partially translated manpages was added. For examples of
usage, please refer to Porter's Handbook.
* USE_TCL/USE_TK variables were changed to provide runtime dependency. New
variables USE_TCL_BUILD and USE_TK_BUILD were added. All unintuitive
quirks of these variables were fixed.
* USE_LDCONFIG was fixed to work properly for ports, that specify @cwd in the
pkg-plists.
* Old bsd.java.mk version 1.0 macros were removed.
* New category: ports-mgmt
* New virtual category: gnustep
* Unused 'picobsd' category was removed.
20070118:
AUTHOR: maho@FreeBSD.org
We'd like to ask all ports maintainers, who are using Fortran77 (f77 in base),
to switch to Fortran90/95 (gfortran42, lang/gcc42). Please refer to
http://people.freebsd.org/~maho/gfortran/gfortran.html
for details.
20061014:
AUTHOR: gnome@FreeBSD.org
The following changes have been introduced to the GNOME porting process
during the GNOME 2.16 update:
* GNOME is now installed into LOCALBASE. Any port which makes use of the
gnomeprefix component will have its PREFIX forced to LOCALBASE
20060930:
AUTHOR: portmgr@FreeBSD.org
The following functional changes were made to bsd.port.mk:
* The bsd.port.mk pre and post includes have been split into 3 pieces
instead of 2, to allow OPTIONS to be able to influence dependencies.
This is still experimental and not yet enabled by any port. This adds
the file 'bsd.port.options.mk'.
* bsd.gcc.mk has been updated to understand gfortran.
* emulators/linux_base is now removed. linux_base-fc4 has been the default
for some time.
* The USE_FIREBIRD macro was added to bsd.database.mk.
20060914:
AUTHOR: portmgr@FreeBSD.org
The following functional changes were made to bsd.port.mk:
* PKGVERSION was introduced as an intermediate variable refactored out of
PKGNAME.
* bsd.lua.mk was added to support lua-related ports.
* DESTDIR was removed from bsd.scons.mk because it was problematic.
* Some quotes were added to the 'missing' target to improve handling of
duplicate origins.
20060903:
AUTHOR: sat@FreeBSD.org
The following functional changes were made to bsd.sites.mk:
* MASTER_SITES variable can now look like MACRO1/subdir1 MACRO2/subdir2, and
be expanded in a way that you expect it to, that is apply different subdirs
to different sites. You can safely replace ${M_S_FOO:S/%SUBDIR%/bar/} with
FOO/bar.
* If M_S_SUBDIR is unset, a macro in M_S won't set it anymore, but rather
substitute %SUBDIR% all by itself. Now it's possible to use macros with
different default subdirs and they will expand in a proper way.
20060805:
AUTHOR: sat@FreeBSD.org
The following functional changes were made to bsd.sites.mk:
* MASTER_SITES variable can now contain special macros which are expanded into
traditional URL[:group] syntax and cause some convenient effects, e.g. set a
default M_S_SUBDIR.
* A macro is any space-delimited word in MASTER_SITES without a forward slash.
* If MASTER_SITE_<macro> is defined, then the macro is expanded to its value.
* Abbreviated macros are provided for extremely popular locations, e.g. CPAN
and SF. To avoid further obfuscation their unabbreviated equivalents should
be avoided.
* Popular macros can trigger M_S_SUBDIR to default to a predefined value, e.g.
${PORTNAME:L} for SF and ${PORTNAME:C/-.*//} for CPAN.
* Abbreviations and M_S_SUBDIR defaults are defined by MASTER_SITES_ABBREVS
and MASTER_SITES_SUBDIRS, both set in bsd.sites.mk.
* If a macro belongs to a group (e.g. SF:source1), all the sites it expands
into also belong to the same group.
* Macros and traditional URL's can be mixed safely, their order stays intact.
20060804:
AUTHOR: gabor@FreeBSD.org
The following functional changes were made to bsd.*.mk and to
Tools/scripts/security-check.awk:
* Add DESTDIR support to let one install ports into a jail from outside.
A package is installed under ${DESTDIR}${PREFIX} now and registered under
${DESTDIR}/var/db/pkg.
* TARGETDIR variable has been added for referencing ${DESTDIR}${PREFIX}.
* LOCALBASE, LINUXBASE and X11BASE variables point to the final destination
now, LOCALBASE_REL, LINUXBASE_REL and X11BASE_REL can be used for the
old behavior. The behavior has not been changed in PLIST_SUB.
Note, that the three variables are still overridable with a hack, so this
change doesn't affect POLA, but necessary for DESTDIR support.
* OSVERSION is now determined from the userland, not from the kernel.
Cross-compiling between releases is still not supported, but this
behavior is more correct for jails with differing userland from
the kernel version.
* Add some sanity check for PREFIX and DESTDIR. This can be skipped by
defining IGNORE_PATH_CHECKS, but very discouraged.
* Deinstalling from DESTDIR, determining if a port is already installed in
DESTDIR, etc. are implemented by chrooting those specific commands.
* Text changes to reflect that we are installing to DESTDIR, removing from
DESTDIR, etc.
Note, that this change implements only the infrastructure support. Ports should
also be implemented to respect DESTDIR.
20060717:
AUTHOR: portmgr@FreeBSD.org
The following functional changes were made to bsd.port.mk:
* Introduces IA32_BINARY_PORT for certain cases where a given port fetches
and installs compiled i386 binaries.
* Adds some infrastructure for support of 32-bit i386 apps on amd64.
* Again fix USE_LDCONFIG logic to make it work with non-default PREFIX to
fix bug introduced in previous revision.
20060705:
AUTHOR: portmgr@FreeBSD.org
The following functional changes were made to bsd.port.mk:
* Change all bogus uses of BROKEN to IGNORE. (Note: the BROKEN_WITH_*
forms are retained for compatibility but deprecated.) Internally,
these variables all had already set IGNORE, not BROKEN, so they
were really misnomers.
* Fix USE_LDCONFIG with non-default PREFIX.
* Fix DESKTOP_ENTRIES processing on 4.x.
* Add 'make missing' to show missing dependencies.
* Add bsd.scons.mk and bsd.wx.mk.
20060616:
AUTHOR: portmgr@FreeBSD.org
The patch in ports/95841 to get rid of remnants of FORCE_PKG_REGISTER
was backed out because it broke kdelibs3*.
20060616:
AUTHOR: portmgr@FreeBSD.org
The following functional changes were made to bsd.port.mk:
* Update default MySQL version from 4.1 to 5.0 [1]
* Update default PHP version from 4 to 5 [2]
* Update default LDAP version from 2.2 to 2.3 [3]
* Add support for LDAP version 2.4 [4]
* Update default linux_base from '8' (Redhat 8) to 'fc4' (Fedora Core 4) [5]
* Switch default Linux X implementation from XFree86 to X.org to track the
above [5]
* Deprecate INSTALLS_SHLIB and replace it by USE_LDCONFIG. If set to "yes",
the old behavior is preserved. Otherwise, it can be set to a list of
directories to be added to ${PREFIX}/libdata/ldconfig/${UNIQUENAME}.
Note that this directory is used by ldconfig startup script, it is meant
to replace ldconfig scripts installed by some ports as (sometimes
000.${UNQUENAME}.sh) [6]
* Adds USE_LDCONFIG32 which is like USE_LDCONFIG but the target file is
${PREFIX}/libdata/ldconfig32/${UNIQUENAME} instead. (Note: this should
only be used on 64-bit architectures) [6]
* Set the default LANG for tr to be C to avoid some build problems [7]
* Include bsd.java.mk in both pre and post sections [8]
* Get rid of remnants of FORCE_PKG_REGISTER [9]
* Always print options with make showconfig [10]
PR: 92805 [1], 92806 [2], 96793 [3], 97515 [4], 96849 [5],
91933 [6], 91381 [7], 97020 [8], 95841 [9], 97133 [10]
20060523:
AUTHOR: portmgr@FreeBSD.org
The following functional changes were made to bsd.port.mk:
* include bsd.emacs.mk only when USE_EMACS is set [5]
* Correct the implementation of pretty-print-run-depends-list [8]
* Use a consistent name for the cookies file when PKGNAMEPREFIX/SUFFIX
are set after bsd.port.pre.mk. [9]
* Include bsd.tcl.mk if USE_TCL_BUILD is defined [10]
* Set PERL_MM_USE_DEFAULT in BATCH mode [11]
* Add the {ONLY,NOT}_FOR_ARCH_REASON and
{ONLY,NOT}_FOR_ARCH_REASON_${ARCH} variables to allow better
customization of the error string reported to users when they
attempt a build on an unsupported architecture. [12]
* Avoid errors from duplicated targets when parsing MLINKS on ports
without a default value set. [13]
* Fix handling of MLINKS when invalid entries are listed [14]
* Enforce sanity of DESKTOP_ENTRIES. If the Categories field is
omitted, try to map ports categories to their freedesktop.org
counterpart [15]
PR: 95238 [5], 94164 [8], 94219 [9], 92355 [10],
95579 [11], 94675 [12], 66109 [13], 66110 [14], 95603 [15]
20060121:
AUTHOR: portmgr@FreeBSD.org
The following changes affecting ports developers were introduced:
* Gamin is a default FAM system
* New virtual categories: hamradio and rubygems
* Virtual category 'offix' was removed
* New USE_DOS2UNIX variable for converting DOS linefeeds to UNIX
* Variables like BROKEN and FORBIDDEN should no longer be quoted
* New NOFETCHFILES variable to prevent downloading from MASTER_SITES
while still allowing MASTER_SITE_OVERRIDE
* New plist macro @dirrmtry with functionality of @unexec rmdir || true
* USE_REINPLACE no longer needs to be defined, REINPLACE_CMD is always
available
Detailed documentation of new features is available in Porter's Handbook.
20051108:
AUTHOR: portmgr@FreeBSD.org
The following changes were introduced:
* Add bsd.database.mk
- move out from bsd.port.mk USE_MYSQL and USE_PGSQL.
- add support for Berkeley DB and SQLite (via USE_BDB and USE_SQLITE
knobs).
* Escape '+' in make search
* Add "makepatch" target to simplify creation of patches during porting
* Replace deprecated MACHINE_ARCH with ARCH
* Remove support of OpenLDAP 2.1
* Add bsd.tcl.mk
It introduces USE_TCL/USE_TCL_BUILD knobs to support various
version of tcl (8.0 -> 8.4)
* Fix cosmetic bugs in security-check target
* Add support for INDEX-7 and above (up to INDEX-9 actually)
* Add "package-recursive" to bsd.port.subdir.mk
* Remove check for FreeBSD version < 460101
* New category: net-im
* Add .desktop file facilities
It introduces DESKTOPDIR and DESKTOP_ENTRIES knobs
* Add SHA256 support to "*checksum" targets
* Fix USE_PYTHON with OPTIONS
* Force NO_LINT to MAKE_ENV to avoid library breaks
* Fix typo: s/RC_ORDER/USE_RCORDER/g
* Add support for PostgreSQL 8.1
* Add bsd.apache.mk
USE_APACHE knob enhancements
20051105:
AUTHOR: gnome@FreeBSD.org
GNOME has been upgraded from 2.10.2 to 2.12.1. This update brings with
it many important porting changes:
- gtk20's pkg-config file no longer contains the X11 pango modules.
Therefore, if your port requires these modules, you may have to
manually patch them in to your port's Makefiles. Contact
gnome@FreeBSD.org if you have questions on this.
- A new USE_GNOME component, ltverhack, has been added. This
pseudo-component hacks libtool so that shared library versions are
more consistent with other operating systems. Using this component
can prevent unnecessary shared library version changes.
- A new macro, INSTALLS_ICONS, has been added. If your port installs
Freedesktop-style icons to ${LOCALBASE}/share/icons or
${X11BASE}/share/icons, then you should use this macro. NOTE:
use of this macro requires your port to set either USE_GNOME or
WANT_GNOME.
20050618:
AUTHOR: netchild@FreeBSD.org
- USE_LINUX now implies NO_FILTER_SHLIBS=yes. It also doesn't use FreeBSD
tools to strip binaries anymore, so it's not necessary anymore to override
STRIP and STRIP_CMD.
- USE_LINUX_PREFIX implies NO_MTREE now.
- In the USE_LINUX case, USE_XLIB now depends upon the Linux X11 libraries
instead upon the native FreeBSD libraries.
- The variable LINUX_BASE_PORT contains a string which is suitable as an
item in *_DEPENDS, so if a port BATCH_DEPENDS or FETCH_DEPENDS upon the
default (or overridden) Linux base, ${LINUX_BASE_PORT} should be used
instead of a hardcoded reference.
- If USE_LINUX or OVERRIDE_LINUX_BASE doesn't point to an existing linux_base
port and if USE_LINUX isn't set to "yes" (case insensitive), the port will
be marked as IGNORE.
20050609:
AUTHOR: portmgr@FreeBSD.org
The following changes were introduced:
* Improve documentation of CONFLICTS.
* Fix add-plist-docs target to work correctly with wildcards.
* Fix USE_MYSQL and USE_PGSQL knobs to work in partial ports
tree.
* Introduce 2 new variables: USE_FAM and WANT_FAM_SYSTEM.
* Suppress "Vulnerability check disabled" message if
DISABLE_VULNERABILITIES is defined.
* Switch default MySQL version to 4.1
* Add support for OpenLDAP v.23
* Fix add-plist-info and add-plist-post targets to avoid warnings
from ports which redefine them.
* Fix add-plist-docs target to handle NOPORTDOCS knob properly.
* Use INSTALLDIRS="site" in configure for perl ports.
* Fix NO_(CHECKSUM|BUILD|INSTALL|PACKAGE) knobs if OPTIONS are
defined.
* Add an ability to depend on versioned installed package.
Example:
BUILD_DEPENDS=p5-Tree-Simple>=1.12:${PORTSDIR}/devel/p5-Tree-Simple
Please note, it's experimental feature, work is currently in
progress.
20050325:
AUTHOR: jdp@FreeBSD.org
The CVSup port has been upgraded with a patch to correct the
handling of the "refuse" file for files that are in the CVS Attic.
This solves a problem some people were having, where CVSup would
delete their ports/INDEX* files even though the files were listed
in the "refuse" file. The bug fix is in the cvsupd server, so
mirror sites must upgrade their servers in order for this fix to
help. Meanwhile, adding "ports/Attic/INDEX*" to the refuse file
serves as a work-around.
20050321:
AUTHOR: kwm@FreeBSD.org
The gstreamer-plugins gconf dependency moved to its own port in devel.
When your application needs gstreamer-plug-gconf, just add
USE_GSTREAMER=gconf to you Makefile
20050319:
AUTHOR: gnome@FreeBSD.org
New GNOME components have been added to bsd.gnome.mk. See
http://www.FreeBSD.org/gnome/docs/gnome2_porting.html for the complete
list of available GNOME 2 components.
Py-gnome2 lost many of its GNOME dependencies to a new port,
py-gnome-extras. Therefore, ports that used to depend on
the pygnome2 component for modules such as gtkhtml2, gnomepanel, etc.
should replace the pygnome2 dependency with pygnomeextras.
20050314:
AUTHOR: edwin@FreeBSD.org
New variable for in /etc/make.conf: IGNORE_MASTER_SITE_xxx
If you prefer a certain mastersite for a collection of master-sites,
set this in your /etc/make.conf:
MASTER_SITE_xxx=http://z.x.y/%SUBDIR%/
If you insist on only using the ones you specify, set this in
your /etc/make.conf:
IGNORE_MASTER_SITE_xxx=yes
MASTER_SITE_xxx=http://z.x.y/%SUBDIR%/
Use "make -V MASTER_SITES" to see the differences.
20050313:
AUTHOR: ahze@FreeBSD.org, kwm@FreeBSD.org
The following changes were committed:
* USE_GNOME=gstreamerplugins has been deprecated.
The new method which uses bsd.gstreamer.mk is:
USE_GSTREAMER=plugin-name
Example:
USE_GSTREAMER= dvd
or
WANT_GSTREAMER= yes
.include <bsd.port.pre.mk>
.if defined(WITH_DVD)
USE_GSTREAMER= dvd
.endif
* misc/gnomehier now creates a mtree file and each port
using USE_GNOME=gnomehier or gnomeprefix now use the
BSD.gnome-x11.dist mtree file to help "keep" directories
and not accidentally add gnome directories to a port.
20050207:
AUTHOR: portmgr@FreeBSD.org
The following changes were committed:
* Change bento to pointyhat names in comments.
* Document DISABLE_VULNERABILITIES variable.
* Add WWW: line for 'search' target.
* Speedup check-vulnerable invocation, if portaudit is installed.
* Run install-info for all .info files.
* Run add-plist-docs more strictly and prevent some situations
with leftover files in the future.
* Introduce two new variables: MASTER_PORT and SLAVE_PORT.
The results from these variables is only used as information for
users.
* Honor OPTIONS if PACKAGE_BUILDING or BATCH are defined.
* Move all USE_GCC entries to new file - bsd.gcc.mk. 'test-gcc'
target allows users to check gcc version if USE_GCC is used.
Give maintainers opportunity to add '+' character to USE_GCC version
for using specified and higher versions.
Example:
USE_GCC=3.3+
builds ports with gcc version 3.3 and higher (3.4, 4.0).
* Install startup scripts with the help of USE_RC_SUBR variable.
* Add three new targets: config-recursive, rmconfig-recursive and
config-conditional. You can set or delete OPTIONS for all
dependencies before every build. config-conditional target is
used to skip configuring ports which have already been
configured.
* Fix using of WANT_PGSQL_VER variable if PostgreSQL is already
installed.
20041231:
AUTHOR: netchild@FreeBSD.org
USE_LINUX_PREFIX doesn't implies USE_LINUX anymore.
20041209:
AUTHOR: portmgr@FreeBSD.org
The following changes were committed:
* Define new macros: DATE, FMT, MKTEMP, OBJDUMP, and use
command macro SORT.
* Change layout of comments to 4 column tabs, remove lots
of spaces and eight-column-tabs.
* Introduce 2 new variables: SUB_FILES and SUB_LIST:
Example:
SUB_FILES= pkg-message pkg-install
SUB_LIST+= "VERSION=${VERSION}"
This looks for ${FILESDIR}/pkg-message.in and ${FILESDIR}/pkg-install.in
Substitutions in SUB_LIST are applied to these files and the
output is redirected to ${WRKDIR}.
PKGMESSAGE will be set to ${WRKDIR}/pkg-message.
PKGINSTALL will be set to ${WRKDIR}/pkg-install.
* Document DEPRECATED and EXPIRATION_DATE variables.
* Sanitize the intermittent output by the build infrastructure
so that cutting and pasting from it no longer interferes
with GNATS-tags.
* Honor configure arguments for USE_XLIB if USE/WITH_LIBTOOL_ is
used.
* Properly document 'describe' target.
* Properly remove directories at deinstallation time if ports sets
a non-standard PREFIX.
* Defaults INDEXFILE to INDEX-6 on 6-CURRENT.
20041119:
AUTHOR: portmgr@FreeBSD.org
The following changes were committed:
* Fix INDEX build if MAINTAINER is not defined.
* Remove USE_QT2 option, since qt2 is obsolete.
* Better define and explain ARCH option.
* Add new script Tools/make_readmes, to speedup 'readmes'
target. Avoid recursing into individual port directories and run
it at top level, after the category README.html files have been
created.
* Fix 'search' target and enable a case-insensitive search on 5-x.
* Extend 'search' target and enable search by categories.
* Remove 'tk42' and 'tcl76' categories since they're obsolete.
* Introduce DISTVERSION variable, that can be set instead of
PORTVERSION and is automatically converted in a conforming PORTVERSION.
Example:
DISTVERSION= 10Alpha3
extends 10Alpha3 to 10.a3
DISTVERSION= 3Beta7-pre2
extends 3Beta7-pre2 to 3.b7.p2
* Use --suffix option instead of -b for patch(1), to make it
compatible with BSD patch(1).
* Fix {WANT,WITH}_MYSQL_VER behavior, to deal with conflicting
versions.
20041116:
AUTHOR: gnome@FreeBSD.org
The way OMF files are handled has been changed to use the new INSTALLS_OMF
macro (similar to INSTALLS_SHLIB). Details about the new macro can be found
at http://www.FreeBSD.org/gnome/docs/porting.html and bsd.gnome.mk.
20041113:
AUTHOR: portmgr@FreeBSD.org
Since INDEX version in CVS is always too old, portmgr decided to
remove it. You will still be able to build your own INDEX or use
'fetchindex' target in /usr/ports/.
20041109:
AUTHOR: gnome@FreeBSD.org
The way GConf schema files are handled has been changed to use the new
GCONF_SCHEMAS macro (similar to MAN). Details about the new macro can be
found at http://www.FreeBSD.org/gnome/docs/porting.html and bsd.gnome.mk.
20040803:
AUTHOR: ade@FreeBSD.org
As part of the ongoing autotools cleanup, devel/autoconf has been
replaced with devel/autoconf253, and devel/automake with devel/automake15.
Consumers of the various autotools knobs from bsd.autotools.mk should not
notice any differences. This update completes the transition of autotools
to true versioned packages (cf: tcl/tk)
20040723:
AUTHOR: anholt@FreeBSD.org
The XFREE86_VERSION variable is replaced by the X_WINDOW_SYSTEM variable.
XFREE86_VERSION may no longer be used by ports Makefiles. X_WINDOW_SYSTEM may
currently be set to xorg, xfree86-4, and xfree86-3 (please use :L in checking
it). Several X_*_PORT variables are provided by bsd.port.mk which map to the
appropriate port for the X_WINDOW_SYSTEM chosen.
20040719:
AUTHOR: ale@FreeBSD.org
There has been a big update to PHP ports and bsd.php.mk to add more
flexibility and new features.
Now a port may depend on a specific set of PHP extensions. To do so,
simply replace:
USE_PHP= yes
with:
USE_PHP= ext1 ext2 ext3 ...
in the port Makefile. A list of all PHP extensions is included in bsd.php.mk.
If the requirement is a build dependency too, the port should also define:
USE_PHP_BUILD=yes
Moreover, the new knob WANT_PHP_SCR has been added to indicate that the port
requires the 'php' binary to run.
Last but not least, many common operations to build/install/register a
PHP extension can now be omitted from the port Makefile if it defines:
USE_PHPEXT= yes
For more information on this point and on additional variables, see
bsd.php.mk.
20040717:
AUTHOR: eik@FreeBSD.org
OpenLDAP version 2.2 is now the default.
When your port links against the openldap client libraries use
USE_OPENLDAP= yes
and do not depend on a particular version. A user (or package
building cluster) can select the desired flavor with
WANT_OPENLDAP_VER and WANT_OPENLDAP_SASL, but these must not
be used in ports Makefiles.
20040709:
AUTHOR: portmgr@FreeBSD.org
USE_LIBTOOL_VER now configures a port to use the ports version of libtool
instead of its included version. This was put in place to reduce the
number of ad hoc patches to individual ports' libtools to prevent .la
file installation as well as fix various threading problems.
To restore the previous libtool behavior, use the new macro,
USE_INC_LIBTOOL_VER. It works the exact same way as USE_LIBTOOL_VER
in that it takes a libtool version as its argument.
For example, to use the included version of libtool with extra hacks
provided by libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
To use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
Note: these macros are mutually exclusive. Your port should only include
one or the other if it needs to make use of libtool.
20040707:
AUTHOR: gnome@FreeBSD.org
The way GConf schema files are installed has changed to support the upcoming
GNOME 2.8 GConf. Details about the change can be found at
http://www.FreeBSD.org/gnome/docs/porting.html. All existing ports have
been converted to the new style, and portlint has been updated to flag
old-style GConf schema installation.
20040610:
AUTHOR: portmgr@FreeBSD.org
The following behavioral or feature changes were committed:
* Support verbose index builds with INDEX_VERBOSE
* Support glob expressions in USE_GETTEXT to allow more flexibility
in the face of future gratuitous library version bumps by the gettext
developers:
USE_GETTEXT=yEs # Works as before (case-insensitive)
USE_GETTEXT=[5-7] # Accepts any of those libintl.so.x versions
# in the LIB_DEPENDS
* Extend 'make search' support to allow much more flexible searching
From the PR:
Besides the good old key and name variables, this patch adds
support for path, info, maint, cat, bdeps, and rdeps, which match
on the appropriate fields, plus their exclusion counterparts: xkey,
xname, etc.
Examples:
Find all ports whose names contain "pear-" but not "html" or "http":
make search name=pear- xname='ht(tp|ml)'
Find ports whose names contain "pear-" and which don't have apache
listed in build-time dependencies:
make search name=pear- xbdeps=apache
The positive variables (name, key, maint, etc) are AND-ed, their
negative versions are OR-ed; in other words, matching any x-
variable will cause the port to be skipped, mismatch on any non-x-
variable will cause it to be skipped.
Examples:
Find ports that are both in the 'www' category and maintained by
Thierry Thomas:
make search maint=thierry@ path=/www/
Find ports in the 'archivers' category that are either not orphaned
or don't have "zip" in their names (contrived):
make search cat=archivers xmaint=ports@freebsd xname=zip
It is possible to select fields to display.
Example:
Find PEAR ports that don't build-depend on apache, displaying only
Port:, Path:, and Info: lines:
make search name=pear- xbdeps=apache display=name,path,info
Case-sensitivity can now be turned of with icase=1.
Example:
Find ports with @freebsd.org maintainer addresses without the
"proper" capitalization (@FreeBSD.org), display their paths and
maintainer addresses:
make search maint=@freebsd\\.org icase=0 display=maint,path
The key and xkey variables can be limited in scope to displayed fields
by setting keylim to 1.
Example:
Find ports that contain "apache" in either of the name, path, info
fields, ignore the rest of the record (dependencies, maintainer
address, etc):
make search key=apache display=name,path,info keylim=1
The following variables can be set e.g. in /etc/make.conf to
control default search behavior:
PORTSEARCH_DISPLAY_FIELDS?=name,path,info,maint,index,bdeps,rdeps
PORTSEARCH_KEYLIM?=0
PORTSEARCH_XKEYLIM?=0
PORTSEARCH_IGNORECASE?=1
* Extend USE_PERL5_BUILD and USE_PERL5 to add EXTRACT and PATCH
dependencies
* While building index, treat non-existent dependencies as fatal.
Previously the error was being hidden by the stderr
redirection.
* Don't always retry BROKEN ports when package building (it is taking
too much time to continually rebuild ports that are usually going
to really be broken). Set TRYBROKEN if you want to attempt a
build of a BROKEN port.
20040604:
AUTHOR: ade@FreeBSD.org
Over the past few weeks, we have been testing the next
incarnation of ports/Mk/bsd.autotools.mk on the road to bringing
at least some semblance of sanity back to this corner of the
ports collection.
By far and away the easiest way to see the changes will be to
view the new file once committed, but here is a summary of the
changes:
1. USE_LIBTOOL, USE_AUTOCONF, USE_AUTOHEADER, USE_AUTOMAKE have
been fully deprecated. Ports attempting to use these variables
after the commit will error out, and most obviously break INDEX
generation, with a helpful error message. Instead, ports must
now specifically choose the version of any of these tools that
they need with the corresponding USE_*_VER variables. Note that
these variables understand any and all versions of autotools ports
in the tree, there is no longer a need to have specific version
numbers hardcoded in the infrastructure of bsd.autotools.mk
(as there is now). In particular, this will immediately open up
automake18 and autoconf259 for general use and beating.
2. Similarly for WANT_LIBTOOL, WANT_AUTOCONF, and WANT_AUTOMAKE.
Again, these have been fully deprecated, and the equivalent
WANT_*_VER versions should be used.
In order to preserve existing behavior for these variables, please
note the 20040314 entry in ports/CHANGES for the appropriate
version numbers to use for any ports in the GNATS queue.
Both WANT_* and USE_* bring in the relevant tool as a build
dependency, and set up a reasonably large number of variables
pointing to the right programs to be using in the port. The
only difference at the moment, is that USE_* will run an extra
autotools-related configuration step, whereas WANT_* merely
requests the environment.
3. The helper knob USE_LIBLTDL has been added which currently
simply adds a LIB dependency on the libltdl port.
4. Three new variables have been introduced,
WANT_{LIBTOOL,AUTOCONF,AUTOMAKE}_RUN=yes. These variables will
do nothing by themselves (a Work-In-Progress), but if the
appropriate autotool version is defined (either through
WANT_*_VER or USE_*_VER), this will add the relevant dependency
to RUN_DEPENDS.
Steps 3 and 4 now essentially negate the need for any kind of
direct dependency within a non-autotools port Makefile on
devel/autoconf*, devel/automake*, devel/libtool*, and devel/libltdl.
20040416:
AUTHOR: java@FreeBSD.org
There has been a couple of bsd.java.mk tweaks and fixes.
. Features from Stage 2 has been removed. A port can no
longer use the JDK dependency features by setting JAVA_HOME.
Use JAVA_PREFERRED_PORT instead (see below).
. The default JDK port now depends on OS version:
java/diablo-jdk13 for 4.x, and java/jdk14 for 5.x
. It is now possible for the user (and the porters) to
define a list of preferred JDK ports to build and run ports.
The port will use the first JDK port from the list that
matches the requirements specified in the Makefile.
JAVA_PREFERRED_PORT contains a list of suitable JDK ports
(sorted by preference). Names for JDKs may be found in
bsd.java.mk, listed in ${_JAVA_PORTS_ALL} (e.g.
"JAVA_PORT_NATIVE_BSDJAVA_1_4").
. JAVA_PORT_VERSION is now set to the full version number
of the chosen JDK (e.g. "1.4.2"). Porters will find hints
regarding how to obtain the same behavior as before in the
header of bsd.java.mk.
20040414:
AUTHOR: gnome@FreeBSD.org
When writing a port that uses GTK+ 2.X, you can now list the dependency
with "USE_GNOME=gtk20" which is preferable to LIB_DEPENDS because the
GTK+ library version only needs to be changed in bsd.gnome.mk.
Please see http://www.FreeBSD.org/gnome/docs/porting.html for all
the available GNOME components as well as detailed instructions on
creating ports that use the GNOME infrastructure.
20040404:
AUTHOR: gnome@FreeBSD.org
The glib20 and gtk20 ports were updated to 2.4.0. This new version
is completely source and binary compatible with the previous 2.2.x
series. However, certain API calls have been deprecated. If your
port defines the following macros, they may refuse to build with
the new versions of glib20 and gtk20:
GTK_DISABLE_DEPRECATED
GDK_DISABLE_DEPRECATED
G_DISABLE_DEPRECATED
The temporary solution is to either patch your port's Makefiles to,
or use an in-place regular expression to remove these macros. The
more permanent solution is to wait until the port's authors update
their code to use current API calls.
20040402:
AUTHOR: java@FreeBSD.org
There has been a big update to bsd.java.mk. However, this update
is mostly backwards compatible, so it shouldn't affect most java
port maintainers. There is some new functionality and minor
changes worth documenting here though.
bsd.java.mk now provides a new set of macros to be used by ports that
require a JDK. When USE_JAVA is set, the following variables may be set
in order to give to precision regarding the requirements of the port:
. JAVA_VERSION
A list of space-separated suitable java versions for the
port. An optional "+" allows you to specify a range of versions.
(allowed values: 1.1[+] 1.2[+] 1.3[+] 1.4[+])
(NOTE: Used to be set by bsd.java.mk)
. JAVA_OS
A list of space-separated suitable JDK port operating systems
for the port. (allowed values: native linux)
(NOTE: Used to be set by bsd.java.mk)
. JAVA_VENDOR
A list of space-separated suitable JDK port vendors for
the port. (allowed values: freebsd bsdjava sun ibm blackdown)
(NOTE: Used to be set by bsd.java.mk)
. JAVA_BUILD
When set, it means that the selected JDK port should be
added to build dependencies for the port.
. JAVA_RUN
This variable works exactly the same as JAVA_BUILD but
regarding run dependencies.
Here are some of the macros defined after setting USE_JAVA:
. JAVA_PORT
The name of the JDK port (e.g. java/jdk14)
. JAVA_HOME
The home of the JDK port in the local base
. JAVA_PORT_VERSION
The version of the JDK port.
(NOTE: Used to be JAVA_VERSION, see above)
. JAVA_PORT_OS
The operating system used by the JDK port.
(NOTE: Used to be JAVA_OS, see above)
. JAVA_PORT_VENDOR
The vendor of the JDK port.
(NOTE: Used to be JAVA_VENDOR, see above)
Plus many macros for the commonly used java executables:
APPLETVIEWER, JAR, JAVA, JAVAC, JAVADOC, JAVAH,
JAVAP, JAVA_KEYTOOL, JAVA_N2A, JAVA_POLICYTOOL,
JAVA_SERIALVER, RMIC, RMID and RMIREGISTRY.
bsd.java.mk 2.0 is mostly backward compatible with the previous
version, save for the notes above and changed internal variables.
Using the new features is strongly encouraged, since the old
bsd.java.mk 1.0 features will be deprecated and may be removed in
the future.
You will find more detailed info (as well as a quick tutorial) at:
http://www.esil.univ-mrs.fr/~hquiroz/freebsd/bsd.java.mk-2.0.html
20040316:
AUTHOR: gnome@FreeBSD.org
The print/freetype2 port has been updated to 2.1.7. This update
changes some of the internal FreeType API. Applications may need
to be patched to support this new API. If a source files includes
freetype/freetype.h, make sure ft2build.h is included before
freetype/freetype.h. The proper way to do this is:
#include <ft2build.h>
#include FT_FREETYPE_H
However, the following will work as well, but is deprecated:
#include <ft2build.h>
#include <freetype/freetype.h>
20040314:
AUTHOR: ade@FreeBSD.org
USE_LIBTOOL, USE_AUTOCONF, and USE_AUTOMAKE are now considered
deprecated, and will be removed on or around June 1st 2004.
All ports should now choose the specific version of the tool,
using USE_LIBTOOL_VER, USE_AUTOCONF_VER, and USE_AUTOMAKE_VER.
The old "system default" behavior can be written as follows:
Old New
USE_LIBTOOL=yes USE_LIBTOOL_VER=13
USE_AUTOCONF=yes USE_AUTOCONF_VER=213
USE_AUTOMAKE=yes USE_AUTOMAKE_VER=14
20040304:
AUTHOR: eik@FreeBSD.org
New variable MASTER_SITE_SOURCEFORGE_EXTENDED. It has the
ten official sourceforge.net download mirrors, whereas
MASTER_SITE_SOURCEFORGE only has five. To check if your
port is mirrored there, go to
<http://prdownloads.sourceforge.net/${MASTER_SITE_SUBDIR}/>
click on ${DISTFILES} and you'll see five or ten mirrors,
corresponding to the variables above.
20040226:
AUTHOR: knu@FreeBSD.org
The default version of Ruby is now 1.8 on all platforms
including the i386.
Users on the i386 platform need to follow the instructions
described in the UPDATING file to cope with this upgrade.
Next time ruby is major upgraded, you won't need to do this
kind of messy work because some subtle changes have been made
to the ruby port infrastructure to make it easier to handle
multiple versions of ruby.
20040217:
AUTHOR: gnome@FreeBSD.org
Mozilla will now default to using GTK2, and will only compile
against Gtk+-1.2 if explicitly requested. This is in exact
opposite to the old behavior.
The valid values of WITH_MOZILLA are now:
mozilla (www/mozilla, GTK2)
mozilla-devel (www/mozilla-devel, GTK2)
mozilla-gtk1 (www/mozilla-gtk1, GTK1)
mozilla-devel-gtk1 (www/mozilla-devel-gtk1, GTK1)
As before, WITH_MOZILLA can be set in /etc/make.conf, but doing
so is not advised unless you desire the development versions.
GTK2 browsers will automatically compile against GTK2 mozilla,
and GTK1 browsers (galeon1, galeon1, and galeon1) will
automatically compile against GTK1.
Again, the only people who will need to take action are those
who desire development versions (which are inactive at this time
anyway). Those who want GTK1 mozilla-devel must set
WITH_MOZILLA=mozilla-devel-gtk1 or they will be pleasantly
surprised with their very own GTK2 installation on the next
update.
WITH_MOZILLA=mozilla-gtk2 and WITH_MOZILLA=mozilla-devel-gtk2
are still honored for the time being, but their use is
now deprecated. Any new ports are not required to consider
their values, and so eventually WITH_MOZILLA _will_ have to
be changed.
Hopefully galeon2 can catch up to peoples' expectations from
galeon1 soon, and we can remove the GTK1 ports altogether.
20040204:
AUTHOR: portmgr@FreeBSD.org
The bsd.php.mk file has been moved out of the lang/php4 port
into the Mk directory. This will make it much easier to include
PHP support in PHP-dependent ports. Instead of including
bsd.php.mk directly, a port can simply set USE_PHP=yes, and the
ports system with Do the Right Thing.
All trailing whitespace has been removed from bsd.port.mk.
Enhance the new OPTIONS code by only including saved options if
the port defines OPTIONS, attempt to use LATEST_LINK as the
unique name for a port (fall back to ${PKGNAMEPREFIX}${PORTNAME}
otherwise), bring the ===> messages in line with the existing
ones by using PKGNAME instead of PORTNAME, use PKGNAME in the
dialog, use ECHO_CMD instead of ECHO_MSG to write the
OPTIONSFILE, display a message during compilation indicating
that user-specified options have been found, and make the output
of the showconfig target a little more user-friendly.
A new USE_ICONV macro has been added that takes the place of an
explicit LIB_DEPENDS on converters/libiconv. This will help
with future shared lib version bumps.
A new USE_GETTEXT macro has been added that takes the place of
an explicit LIB_DEPENDS on devel/gettext. This will help with
future shared lib version bumps.
Module::Build is a system for building, testing, and installing
Perl modules. It will eventually replace the obsoleted
ExtUtils::MakeMaker. Many new Perl modules have already
switched to using Build.PL instead of Makefile.PL. To
facilitate building those modules, a new PERL_MODBUILD macro has
been added. Use that in place of PERL_CONFIGURE when porting
Perl modules that make use of the Module::Build framework.
Certain ports want to check for the availability of SDL
libraries before including them. This change adds a new
WANT_SDL macro similar to WANT_GNOME. By setting this, the
porter indicates that her port can optional use SDL if present
on the system. WANT_SDL should be defined _before_
bsd.port.pre.mk is included. After including bsd.port.pre.mk,
the list of available SDL components will be returned in the
HAVE_SDL macro. For details on how to process this component
list, refer to bsd.sdl.mk.
The OpenBSD and NetBSD projects diverged from the FreeBSD ports
tree years ago, and it no longer make sense to include obsolete
references to incorrect paths in the FreeBSD ports system. This
change removes the NetBSD and OpenBSD PORTSDIR compatibility
bits from bsd.port.mk.
The comment for PKGDIR read, ``A direction containing any
package creating file.'' The word ``direction'' should be
``directory.'' This has been fixed.
A new DIRNAME macro has been added that points to
/usr/bin/dirname. All direct use of dirname in ports can be
switched to this macro.
Direct use of commands dirname, id, and rm have been corrected
to use their macro equivalents instead. Some useless ${HEAD}
-n 1 statements have been removed. A strange comment in the
do-install target and an out of place ``fi'' have been fixed as
well.
On 5-CURRENT after the 5.2-RELEASE split, the default Perl
version has been updated from 5.6.1 to 5.8.2. As well, some
Perl definitions in bsd.port.mk have been moved to their correct
locations which corrects the PERL_LEVEL definition.
The following optimizations have been added to the ports system
to speed up recursive operations such as make describe, make
index, make ignorelist, etc. bsd.gnome.mk is now only included
if a port defines USE_GNOME, WANT_GNOME, and/or USE_GTK. More
variables are cached and passed down through bsd.port.subdir.mk.
Perl is no longer invoked when a simple ``echo'' will do. More
subshell variable assignments have been hidden behind
conditionals so that the commands are not spawned every time.
Finally, dependency lists are only constructed if ports actually
declare dependencies. These optimizations give make index
approximately a 43% speedup.
If CPUFLAGS is not defined (this _CPUCFLAGS is empty), trying
to remove _CPUCFLAGS from CFLAGS will result in an error. This
change fixes that.
On recent versions of 5.X, /etc/rc.subr exists, and there is no
reason to install another copy in ${LOCALBASE}/etc. The reason
this was ever done was to workaround some build issues on bento.
However, testing OSVERSION seems to work in spite of those build
issues.
The ports system now supports MySQL 3.23, 4.0, 4.1, and 5.0.
Also, the ability to scale to newer versions was also but in
place.
An .endif comment indicated that the .if block checked
WANT_MYSQL when, in fact, it was checking WANT_MYSQL_VER. This
has been corrected.
The PTHREAD{CFLAGS,LIBS} macros have been made overridable on
all versions of FreeBSD to allow for alternate threading
implementations (e.g. -lc_r, -lthr, -mt, etc.). The default
threading library has been changed to -lpthread from -lc_r on
-CURRENT.
The new SIZE support broke distfiles fetching on FreeBSD < 4.8.
On those versions of FreeBSD, the SIZE distfile attribute is now
ignored. Also, defining DISABLE_SIZE in, for example,
/etc/make.conf, will ignore the SIZE attribute on all versions
of FreeBSD. This is useful with alternate values for FETCH_CMD.
A new vulnerabilities database has been added to the ports
system in order to keep more accurate, up-to-date, track of
security vulnerabilities. The ports system now knows how to
query that database and dynamically prevents the installation
of vulnerable ports.
In order to allow for more rapid development of the package
tools, the ports system will prefer to use pkg_* tools found in
${LOCALBASE} over those in the base system. However, all PKG_*
macros are still overridable.
A new physical category, net-mgmt, has been created to house
network management ports.
The /var/db/port.mkversion file never really took off, and is
now very obsolete. Replace the code used to generate and check
this file with a simple OSVERSION check. The ports system now
requires FreeBSD 4.3 or higher.
The last round of bsd.*.mk changes broke ports that had
duplicate distinfo entries (e.g. linux_base). This is now
fixed. Along with this fix, only distfiles with a bad checksum
will be refetched, where as distfiles missing from distinfo will
not be refetched.
The PLIST_{DIRS,FILES} macros were passed to the final package
list unchanged by PLIST_SUB. This is not always desirable.
Now, those macros are passed through PLIST_SUB.
The previous OPTIONS code assumed users would be running port
build as root. If this was not the case, OPTIONS configuration
would fail. Now, the bits of the config and rmconfig targets
that require write access to system directories are run under
SU_CMD.
The makesum target will now add a SIZE attribute for each
distfile by default. This can be overridden by defining NO_SIZE
in a port's Makefile. Note: this could probably be expanded to
omit SIZE attributes for specific distfiles in the future.
20040129:
AUTHOR: trevor@FreeBSD.org
SIZE lines in distinfo files: if you set USE_SIZE when you do "make
makesum", the byte sizes of the distfiles will be listed in the
distinfo file. Then, if a distfile is replaced on its master site with
one of a different size than that listed, "make fetch" will fail with a
"size mismatch" error before downloading the file and the user will be
asked to fetch the file by hand. Also, a user will know the size of
the distfiles before fetching and decide to fetch later.
20040129:
AUTHOR: erwin@FreeBSD.org
Start of CHANGES file.
FORMAT:
This file contains a list, in reverse chronological order, of major
breakages or added features in tracking ports. Not all things will be
listed here, and it only starts on January 29, 2004.
Copyright information:
Copyright 2004-2012 FreeBSD Foundation All Rights Reserved.
Redistribution, publication, translation and use, with or without
modification, in full or in part, in any form or format of this
document are permitted without further permission from the author.
THIS DOCUMENT IS PROVIDED BY FREEBSD FOUNDATION ``AS IS'' AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL WARNER LOSH BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Contact portmgr@FreeBSD.org if you have any questions about your use of
this document.
$FreeBSD$
Reference in New Issue View Git Blame Copy Permalink