freebsd-ports/Mk/bsd.gecko.mk
Marcel Moolenaar b0c905418a revision 1.8 fixed sparc64, but accidentally reverted
the change made in revision 1.7 that fixed the powerpc
build. Re-apply revision 1.7.

PR:		powerpc/131490
Approved by:	beat
2010-01-17 19:29:06 +00:00

654 lines
20 KiB
Makefile

#-*- mode: Fundamental; tab-width: 4; -*-
# ex:ts=4
#
# Date created: 12 Nov 2005
# Whom: Michael Johnson <ahze@FreeBSD.org>
#
# $FreeBSD$
#
# 4 column tabs prevent hair loss and tooth decay!
# ======================= USERS =================================
# To specify which gecko-based backend you prefer, use something like:
#
# WITH_GECKO= firefox
#
# The valid backends are:
# firefox flock seamonkey thunderbird
#
# See below for more details.
# ======================= /USERS ================================
# bsd.gecko.mk abstracts the selection of gecko-based backends. It allows users
# and porters to support any available gecko backend without needing to build
# many conditional tests. ${USE_GECKO} is the list of backends that your port
# can handle, and ${GECKO} is set by bsd.gecko.mk to be the chosen backend.
# Users set ${WITH_GECKO} to the list of gecko backends they want on their
# system.
.if defined(USE_GECKO) && ${USE_GECKO}!="gecko"
.if !defined(Gecko_Pre_Include)
# Please make sure all changes to this file are passed through the maintainer.
# Do not commit them yourself (unless of course you're the Port's Wraith ;).
Gecko_Include_MAINTAINER= gecko@FreeBSD.org
Gecko_Pre_Include= bsd.gecko.mk
# Users should use the following syntax:
#
# WITH_GECKO= mozilla firefox seamonkey
# Use mozilla whenever a port supports it, falling back on firefox and
# then seamonkey.
# WITH_GECKO= firefox
# Sets your preferred backend. With this example, firefox will always
# be chosen, unless the port doesn't support a firefox backend. In that
# case, you get whatever the porter chose as the default. Better to use
# the first example.
#
#
# Ports should use the following:
#
# USE_GECKO= mozilla firefox seamonkey
# The list of gecko backends that the port supports. Unless the user
# overrides it with WITH_GECKO, the first gecko listed in USE_GECKO
# will be the default. In the above example, www/mozilla will be used
# as a gecko backend unless WITH_GECKO=firefox or WITH_GECKO=seamonkey
# is defined by the user.
#
# USE_GECKO= firefox-devel<->firefox
# This will sed -e 's/firefox/firefox-devel/' on Makefile.in's and configure
# if ${GECKO}=="firefox-devel"
#
# Example:
# USE_GECKO= mozilla firefox seamonkey
#
# post-patch:
# @${REINPALCE_CMD} -e 's|mozilla-|${GECKO}-|' \
# ${MOZSRC}/configure
#
# If you want your port to check the ${GECKO} variable to see which backend
# has been chosen.
#
# Example:
# USE_GECKO= mozilla firefox seamonkey
#
# post-patch:
# .if ${GECKO}=="seamonkey"
# @${REINPLACE_CMD} -e 's|mozilla-|seamonkey-|' \
# ${MOZSRC}/configure
# .endif
_GECKO_ALL= firefox seamonkey thunderbird flock mozilla \
libxul
thunderbird_PORTSDIR= mail
libxul_PLIST= ${LOCALBASE}/lib/libxul/libxul.so
.for gecko in ${_GECKO_ALL}
${gecko}_PORTSDIR?= www
${gecko}_DEPENDS?= ${PORTSDIR}/${${gecko}_PORTSDIR}/${gecko}
${gecko}_PLIST?= ${LOCALBASE}/lib/${gecko}/libgtkembedmoz.so
.endfor
# Figure out which mozilla to use
# Weed out bad options in USE_GECKO
.for badgecko in ${USE_GECKO}
. if ${_GECKO_ALL:M${badgecko:C/^([^<->]+).*/\1/}}!=""
GOOD_USE_GECKO+= ${badgecko:C/^([^<->]+).*/\1/}
. endif
. if ${_GECKO_ALL:M${badgecko:C/^[^<->]+<->([^<->]+).*/\1/}}!="${badgecko:C/^([^<->]+).*/\1/}"
${badgecko:C/^([^<->]+).*/\1/}_HACK= s:${badgecko:C/^[^<->]+<->([^<->]+).*/\1/}:${badgecko:C/^([^<->]+).*/\1/}:g
. endif
.endfor
.undef GECKO_FALLTHROUGH
.undef _FOUND_WITH_GECKO
# Figure out which gecko to use and weed out the bad ones
.if defined(WITH_GECKO) && defined(GOOD_USE_GECKO)
. for badgecko in ${WITH_GECKO}
. if ${GOOD_USE_GECKO:M${badgecko}}!=""
GOOD_WITH_GECKO+= ${badgecko}
. endif
. endfor
. if defined(GOOD_WITH_GECKO)
. for gecko in ${GOOD_WITH_GECKO}
. if !defined(GECKO_FALLTHROUGH)
GECKO= ${gecko}
GECKO_FALLTHROUGH= ${TRUE}
_FOUND_WITH_GECKO= ${TRUE}
. endif
. endfor
. endif
.endif
.if !defined(GECKO) && defined(GOOD_USE_GECKO)
. for gecko in ${GOOD_USE_GECKO}
. if !defined(GECKO_FALLTRHOUGH)
GECKO= ${gecko}
GECKO_FALLTRHOUGH= ${TRUE}
. endif
. endfor
.endif
# Generic defines
GECKO_CONFIG?= ${LOCALBASE}/bin/${GECKO}-config
XPIDL?= ${LOCALBASE}/lib/${GECKO}/xpidl
XPIDL_INCL?= `${GECKO_CONFIG} --idlflags`
.if defined(GECKO) && ${_GECKO_ALL:M${GECKO}}!=""
BUILD_DEPENDS+= ${${GECKO}_PLIST}:${${GECKO}_DEPENDS}
RUN_DEPENDS+= ${${GECKO}_PLIST}:${${GECKO}_DEPENDS}
.else
IGNORE= Unable to find a supported gecko, please check USE_GECKO
.endif
pre-everything:: _gecko-pre-everything
_gecko-pre-everything::
@${ECHO_CMD} ""
.if !defined(_FOUND_WITH_GECKO) && defined(WITH_GECKO)
@${ECHO_CMD} " Warning: ${PORTNAME} does not support any gecko you"
@${ECHO_CMD} " listed in WITH_GECKO=${WITH_GECKO}."
@${ECHO_CMD} " \"${GECKO}\" will be used"
@${ECHO_CMD} ""
@${ECHO_CMD} " for gecko support, but you can change that by using one of"
@${ECHO_CMD} " the following values:"
.else
@${ECHO_CMD} " ${PORTNAME} is using ${GECKO} for gecko support, but you can"
@${ECHO_CMD} " change that by defining WITH_GECKO to the following values:"
.endif
@${ECHO_CMD} ""
.for gecko in ${GOOD_USE_GECKO}
@${ECHO_CMD} " ${gecko} "
.endfor
@${ECHO_CMD} ""
post-patch: gecko-post-patch
gecko-post-patch:
.if defined(${GECKO}_HACK)
${FIND} ${WRKSRC} -name "Makefile.in" -type f -o -name "configure" -type f | \
${XARGS} ${REINPLACE_CMD} -e ${${GECKO}_HACK}
.endif
.endif
.else # split
.if !defined(_POSTMKINCLUDED) && !defined(Gecko_Pre_Include)
Gecko_Pre_Include= bsd.gecko.mk
# This file contains some reusable components for mozilla ports. It's of
# use primarily to apps from the mozilla project itself (such as Firefox,
# Thunderbird, etc.), and probably won't be of use for gecko-based ports
# like epiphany, galeon, etc.
#
# You need to make sure to add USE_GECKO=gecko to for your port can uses
# one of these options below.
#
# Ports can use the following:
#
# USE_MOZILLA By default, it enables the denendencies: cairo, dbm,
# jpeg, nspr, nss, png, xft and zip. Search for
# '_ALL_DEPENDS' below to see the list. If your port
# doesn't need one of list then you can use '-' like
# 'USE_MOZILLA= -png -zip' to subtract the dependencies.
#
# GECKO_PLIST_PRE_FILES Manual add files in the plist if it needs.
#
# GECKO_PLIST_PRE_DIRS Manual directories in the plist if it needs.
#
# MOZILLA_PLIST_DIRS List of directories to descend into when installing
# and creating the plist
#
# MOZ_PIS_SCRIPTS List of scripts residing in ${FILESDIR} to be
# filtered through MOZCONFIG_SED and installed along
# with our Pluggable Init Scripts (PIS)
#
# MOZ_SED_ARGS sed(1) commands through which MOZ_PIS_SCRIPTS are
# filtered. There is a default set defined here, so
# you probably want to add to MOZ_SED_ARGS rather
# than clobber it
#
# MOZ_OPTIONS configure arguments (added to .mozconfig). If
# NOMOZCONFIG is defined, you probably want to set
# CONFIGURE_ARGS+=${MOZ_OPTIONS}
#
# MOZ_MK_OPTIONS The make(1) arguments (added to .mozconfig). If
# NOMOZCONFIG is defined, you probably want to set
# MAKE_ARGS+=${MOZ_MK_OPTIONS}
#
# MOZ_EXPORT Environment variables for the build process (added
# to .mozconfig). If NOMOZCONFIG is defined, you
# probably want to set MAKE_ENV+=${MOZ_EXPORT}
#
# MOZ_TOOLKIT A variable for the --enable-default-toolkit= in
# CONFIGURE_ARGS. The default is gtk2.
#
# MOZ_EXTENSIONS A list of extensions to build
#
# MOZ_GRAPHICS A list of image decoders to build
#
# MOZ_PROTOCOLS A list of protocols to build (http, ftp, etc.)
#
# PORT_MOZCONFIG Defaults to ${FILESDIR}/mozconfig.in, but can be
# set to a generic mozconfig included with the port
#
# NOGECKO_INSTALL Don't install the built gecko (most likely for
# testing)
#
# NOGECKO_PLIST Don't create a dynamically-generated playlist
#
# NOMOZCONFIG Don't drop a customized .mozconfig into the build
# directory. Options will have to be specified in
# CONFIGURE_ARGS instead
#
MAINTAINER?= gecko@FreeBSD.org
MOZILLA?= ${PORTNAME}
MOZILLA_VER?= ${PORTVERSION}
MOZILLA_BIN?= ${PORTNAME}-bin
MOZILLA_EXEC_NAME?=${MOZILLA}
MOZ_RPATH?= ${MOZILLA}
USE_GNOME+= gtk20 libidl desktopfileutils
USE_ICONV= yes
USE_PERL5_BUILD=yes
USE_XORG= printproto sm xt xi xext x11 xinerama \
ice xproto
MOZILLA_SUFX?= none
MOZSRC?= ${WRKSRC}
WRKSRC?= ${WRKDIR}/mozilla
FAKEDIR?= ${WRKDIR}/fake
PLIST?= ${WRKDIR}/plist
PLISTD?= ${WRKDIR}/plist_dirs
PLISTF?= ${WRKDIR}/plist_files
MASTER_DIR?= ${.CURDIR}/../../www/mozilla
KRB5_HOME?= /usr
MOZ_PIS_DIR?= lib/${MOZILLA}/init.d
ESD_LIB?= libesd.so.2
FREETYPE_LIB?= libfreetype.so.9
GENERIC_MOZCONFIG?= ${.CURDIR}/../../www/mozilla/files/mozconfig-generic.in
PORT_MOZCONFIG?= ${FILESDIR}/mozconfig.in
MOZCONFIG?= ${WRKSRC}/.mozconfig
MOZILLA_PLIST_DIRS?= bin include lib share/idl
GECKO_PTHREAD_LIBS!=${CC} -dumpspecs | ${GREP} -m 1 pthread: | ${SED} -e 's|^.*%{\!pg: %{pthread:|| ; s|}.*$$||' || ${TRUE}
PKGINSTALL?= ${WRKDIR}/pkg-install
PKGDEINSTALL?= ${WRKDIR}/pkg-deinstall
MASTER_MOZDIR?= ${PORTSDIR}/www/mozilla
PKGINSTALL_INC?= ${MASTER_MOZDIR}/pkg-install.in
PKGDEINSTALL_INC?= ${MASTER_MOZDIR}/pkg-deinstall.in
EXTRACT_AFTER_ARGS?= | ${TAR} -xf - --exclude */CVS/* \
--exclude */macbuild/* \
--exclude */package/* \
--exclude mozilla/gc/boehm
MOZ_PKGCONFIG_FILES?= ${MOZILLA}-gtkmozembed ${MOZILLA}-js \
${MOZILLA}-xpcom ${MOZILLA}-plugin
CFLAGS+= ${PTHREAD_CFLAGS}
LIBS+= ${PTHREAD_LIBS} -L${LOCALBASE}/lib -liconv
_USE_GECKO_OPTIONS_ALL= java debug logging optimized_cflags
.if !defined(USE_GECKO_OPTIONS)
USE_GECKO_OPTIONS= debug logging optimized_cflags
.endif
debug_OPTION= "Build a debugging image" off
java_OPTION= "Enable JAVA xpcom" off
logging_OPTION= "Enable additional log messages" off
optimized_cflags_OPTION= "Enable some additional optimizations" off
.for option in ${USE_GECKO_OPTIONS:L}
.if ${_USE_GECKO_OPTIONS_ALL:M${option}}!=""
OPTIONS+= ${option:U} ${${option}_OPTION}
_${option}= ${TRUE}
.endif
.endfor
# Standard depends
_ALL_DEPENDS= cairo dbm jpeg nspr nss png xft zip
cairo_LIB_DEPENDS= cairo.2:${PORTSDIR}/graphics/cairo
cairo_MOZ_OPTIONS= --enable-system-cairo
cairo_EXTRACT_AFTER_ARGS= --exclude mozilla/gfx/cairo
dbm_EXTRACT_AFTER_ARGS= --exclude mozilla/dbm
jpeg_LIB_DEPENDS= jpeg.10:${PORTSDIR}/graphics/jpeg
jpeg_MOZ_OPTIONS= --with-system-jpeg=${LOCALBASE}
jpeg_EXTRACT_AFTER_ARGS= --exclude mozilla/jpeg
nspr_LIB_DEPENDS= nspr4:${PORTSDIR}/devel/nspr
nspr_MOZ_OPTIONS= --with-system-nspr
nss_LIB_DEPENDS= nss3:${PORTSDIR}/security/nss
nss_EXTRACT_AFTER_ARGS= --exclude mozilla/security/nss
nss_MOZ_OPTIONS= --with-system-nss
nss_CPPFLAGS+= -I${LOCALBASE}/include/nss -I${LOCALBASE}/include/nss/nss
nss_LDFLAGS+= -L${LOCALBASE}/lib/nss -Wl,-rpath,${PREFIX}/lib/${MOZ_RPATH}
png_LIB_DEPENDS= png.5:${PORTSDIR}/graphics/png
png_MOZ_OPTIONS= --with-system-png=${LOCALBASE}
xft_LIB_DEPENDS= Xft.2:${PORTSDIR}/x11-fonts/libXft
zip_DEPENDS= zip:${PORTSDIR}/archivers/zip
.for use in ${USE_MOZILLA}
${use:S/-/_WITHOUT_/}= ${TRUE}
.endfor
.for dep in ${_ALL_DEPENDS}
.if !defined(_WITHOUT_${dep})
BUILD_DEPENDS+= ${${dep}_DEPENDS}
LIB_DEPENDS+= ${${dep}_LIB_DEPENDS}
RUN_DEPENDS+= ${${dep}_DEPENDS}
MOZ_OPTIONS+= ${${dep}_MOZ_OPTIONS}
EXTRACT_AFTER_ARGS+= ${${dep}_EXTRACT_AFTER_ARGS}
CPPFLAGS+= ${${dep}_CPPFLAGS}
LDFLAGS+= ${${dep}_LDFLAGS}
.endif
.endfor
# Standard options from README
MOZ_TOOLKIT?= gtk2
MOZ_OPTIONS+= --enable-crypto \
--disable-tests \
--enable-default-toolkit=${MOZ_TOOLKIT} \
--enable-xft \
--with-pthreads
# Configure options for install
MOZ_OPTIONS+= --x-includes=${LOCALBASE}/include \
--x-libraries=${LOCALBASE}/lib
.if !defined(MOZ_EXTENSIONS)
MOZ_OPTIONS+= --enable-extensions=default
.else
MOZ_OPTIONS+= --enable-extensions=${MOZ_EXTENSIONS}
.endif
.if !defined(MOZ_GRAPHICS)
MOZ_OPTIONS+= --enable-image-decoders=default
.else
MOZ_OPTIONS+= --enable-image-decoders=${MOZ_GRAPHICS}
.endif
.if !defined(MOZ_PROTOCOLS)
MOZ_OPTIONS+= --enable-necko-protocols=default
.else
MOZ_OPTIONS+= --enable-necko-protocols=${MOZ_PROTOCOLS}
.endif
# others
MOZ_OPTIONS+= --with-system-zlib=/usr \
--with-gssapi=${KRB5_HOME} \
--disable-auto-deps \
--enable-chrome-format=jar \
--disable-cpp-exceptions \
--disable-cpp-rtti \
--disable-glibtest \
--disable-gtktest \
--disable-freetypetest \
--enable-double-buffer \
--enable-mathml \
--disable-installer \
--disable-md \
--disable-pedantic \
--disable-bidi \
--disable-xterm-updates \
--disable-xprint \
--enable-xinerama
MOZ_MK_OPTIONS+= XP_UNIX=1 \
PERL=${PERL}
.if defined(WITH_OPTIMIZED_CFLAGS)
CFLAGS:= ${CFLAGS} -O2 -fno-strict-aliasing ${EXTRA_CFLAGS}
WITH_OPTIMIZE?= -O2
.else
CFLAGS:= ${CFLAGS} ${EXTRA_CFLAGS}
WITH_OPTIMIZE?=
.endif
.if defined(WITH_SMB)
USE_GNOME+= gnomevfs2
MOZ_OPTIONS+= --enable-gnomevfs
.else
MOZ_OPTIONS+= --disable-gnomevfs
.endif
.if defined(WITH_DEBUG)
MOZ_OPTIONS+= --enable-debug \
--disable-strip
WITH_LOGGING= yes
.else
MOZ_OPTIONS+= --disable-debug \
--enable-optimize=${WITH_OPTIMIZE} \
--enable-strip
.endif
.if defined(WITH_JAVA) && defined(_WITH_JAVA)
USE_JAVA= yes
JAVA_VERSION+= 1.4+
JAVA_OS+= native
CONFIGURE_ENV+= JAVA_HOME="${JAVA_HOME}"
MOZ_OPTIONS+= --enable-javaxpcom
.endif
.if defined(WITH_LOGGING)
MOZ_OPTIONS+= --enable-logging
.else
MOZ_OPTIONS+= --disable-logging
.endif
MOZ_SED_ARGS+= -e's|@CPPFLAGS@|${CPPFLAGS}|g' \
-e 's|@CFLAGS@|${CFLAGS}|g' \
-e 's|@LDFLAGS@|${LDFLAGS}|g' \
-e 's|@LIBS@|${LIBS}|g' \
-e 's|@LOCALBASE@|${LOCALBASE}|g' \
-e 's|@FAKEDIR@|${FAKEDIR}|g' \
-e 's|@PERL@|${PERL5}|g' \
-e 's|@KRB5_HOME@|${KRB5_HOME}|g' \
-e 's|@MOZDIR@|${PREFIX}/lib/${MOZILLA}|g' \
-e 's|%%PREFIX%%|${PREFIX}|g' \
-e 's|%%CFLAGS%%|${CFLAGS}|g' \
-e 's|%%LDFLAGS%%|${LDFLAGS}|g' \
-e 's|%%LIBS%%|${LIBS}|g' \
-e 's|%%LOCALBASE%%|${LOCALBASE}|g' \
-e 's|%%FAKEDIR%%|${FAKEDIR}|g' \
-e 's|%%PERL%%|${PERL5}|g' \
-e 's|%%KRB5_HOME%%|${KRB5_HOME}|g' \
-e 's|%%MOZILLA%%|${MOZILLA}|g' \
-e 's|%%MOZILLA_BIN%%|${MOZILLA_BIN}|g' \
-e 's|%%MOZDIR%%|${PREFIX}/lib/${MOZILLA}|g'
MOZCONFIG_SED?= ${SED} ${MOZ_SED_ARGS}
.if ${ARCH}=="sparc64"
# Work around miscompilation/mislinkage of the sCanonicalVTable hacks.
MOZ_OPTIONS+= --disable-v1-string-abi
.endif
.else # bsd.port.post.mk
post-patch: gecko-post-patch gecko-moz-pis-patch
gecko-post-patch:
.if exists(${PKGINSTALL_INC})
@${MOZCONFIG_SED} < ${PKGINSTALL_INC} > ${PKGINSTALL}
.endif
.if exists(${PKGDEINSTALL_INC})
@${MOZCONFIG_SED} < ${PKGDEINSTALL_INC} > ${PKGDEINSTALL}
.endif
@${RM} -f ${MOZCONFIG}
.if !defined(NOMOZCONFIG)
.if exists(${GENERIC_MOZCONFIG})
@${MOZCONFIG_SED} < ${GENERIC_MOZCONFIG} >> ${MOZCONFIG}
.endif
@if [ -e ${PORT_MOZCONFIG} ] ; then \
${MOZCONFIG_SED} < ${PORT_MOZCONFIG} >> ${MOZCONFIG} ; \
fi
.for arg in ${MOZ_OPTIONS}
@${ECHO_CMD} ac_add_options ${arg} >> ${MOZCONFIG}
.endfor
.for arg in ${MOZ_MK_OPTIONS}
@${ECHO_CMD} mk_add_options ${arg} >> ${MOZCONFIG}
.endfor
.for var in ${MOZ_EXPORT}
@${ECHO_CMD} "export ${var}" >> ${MOZCONFIG}
.endfor
.endif # .if !defined(NOMOZCONFIG)
@${REINPLACE_CMD} -e 's/%{idldir}/%idldir%/g ; \
s|"%FULL_NSPR_CFLAGS%"|`nspr-config --cflags`|g ; \
s|"%FULL_NSPR_LIBS%"|`nspr-config --libs`|g' \
${MOZSRC}/build/unix/mozilla-config.in
@${REINPLACE_CMD} -e 's|<iconv.h>|\"${LOCALBASE}/include/iconv.h\"|g' \
${WRKSRC}/configure \
${MOZSRC}/intl/uconv/native/nsNativeUConvService.cpp \
${MOZSRC}/xpcom/io/nsNativeCharsetUtils.cpp
@${REINPLACE_CMD} -e 's|%%MOZILLA%%|${MOZILLA}|g' \
${WRKSRC}/config/autoconf.mk.in
@${REINPLACE_CMD} -e 's|-pthread|${PTHREAD_LIBS}|g ; \
s|echo aout|echo elf|g ; s|/usr/X11R6|${LOCALBASE}|g' \
${MOZSRC}/security/coreconf/FreeBSD.mk \
${MOZSRC}/js/src/Makefile.in
@if [ -d ${WRKSRC}/directory/c-sdk ]; then \
${REINPLACE_CMD} -e 's|echo aout|echo elf|g' \
${WRKSRC}/directory/c-sdk/config/FreeBSD.mk \
${WRKSRC}/directory/c-sdk/configure ; \
fi
@${REINPLACE_CMD} -e 's|-lc_r|${PTHREAD_LIBS}|g ; \
s|-lpthread|${PTHREAD_LIBS}|g ; \
s|echo aout|echo elf|g ; \
s|/usr/X11R6|${LOCALBASE}|g' \
${WRKSRC}/configure
@${REINPLACE_CMD} -e 's|%%PREFIX%%|${PREFIX}|g ; \
s|%%LOCALBASE%%|${LOCALBASE}|g' \
${MOZSRC}/build/unix/run-mozilla.sh
@${REINPLACE_CMD} -E -e 's|libesd\.so\.[0-9]+|libesd.so|g' \
${MOZSRC}/widget/src/gtk2/nsSound.cpp
@${REINPLACE_CMD} -E -e 's|libcups\.so\.[0-9]+|libcups.so|g' \
${MOZSRC}/*/*/*/nsDeviceContextSpecG.cpp
@${REINPLACE_CMD} -e 's|/usr/local/netscape|${LOCALBASE}|g ; \
s|/usr/local/lib/netscape|${LOCALBASE}/lib|g' \
${MOZSRC}/xpcom/*/SpecialSystemDirectory.cpp
# handles mozilla pis scripts.
gecko-moz-pis-patch:
.for moz in ${MOZ_PIS_SCRIPTS}
@${MOZCONFIG_SED} < ${FILESDIR}/${moz} > ${WRKDIR}/${moz}
.endfor
post-configure: gecko-post-configure
gecko-post-configure:
@${ECHO_CMD} "#define JNIIMPORT" >> ${MOZSRC}/mozilla-config.h
post-build: gecko-post-build
gecko-post-build:
@${REINPLACE_CMD} -e "s|\(Libs:.*\)\($$\)|\1 -Wl,-rpath,${PREFIX}/lib/${MOZ_RPATH}\2|" \
${MOZSRC}/build/unix/*.pc || ${TRUE}
pre-install: gecko-moz-pis-pre-install gecko-pre-install port-pre-install gecko-create-plist
.if !target(port-pre-install)
port-pre-install:
@${DO_NADA}
.endif
gecko-pre-install:
.if !defined(NOGECKO_PLIST)
@${RM} -rf ${FAKEDIR} ${PLIST} ${PLISTD} ${PLISTF}
@${TOUCH} -f ${PLIST} ${PLISTD} ${PLISTF}
@cd ${MOZSRC} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} \
${MAKEFILE} ${MAKE_ARGS} prefix=${FAKEDIR} ${INSTALL_TARGET}
.if defined(MOZILLA_SUFX) && ${MOZILLA_SUFX}!="none"
${MV} ${FAKEDIR}/bin/${MOZILLA:S/${MOZILLA_SUFX}//} ${FAKEDIR}/bin/${MOZILLA}
.if exists(${FAKEDIR}/bin/${MOZILLA:S/${MOZILLA_SUFX}//}-config)
${MV} ${FAKEDIR}/bin/${MOZILLA:S/${MOZILLA_SUFX}//}-config ${FAKEDIR}/bin/${MOZILLA}-config
.endif
.for pc in ${MOZ_PKGCONFIG_FILES:S|${MOZILLA_SUFX}||}
${SED} -e 's|Requires: ${MOZILLA:S/${MOZILLA_SUFX}//}|Requires: ${MOZILLA}|' \
${FAKEDIR}/lib/pkgconfig/${pc}.pc > ${FAKEDIR}/lib/pkgconfig/${pc:S/${MOZILLA:S,${MOZILLA_SUFX},,}/${MOZILLA}/}.pc
.endfor
@${REINPLACE_CMD} -e 's|${MOZILLA}-bin|${MOZILLA:S/${MOZILLA_SUFX}//}|; \
s|$${progbase}-bin|${MOZILLA:S/${MOZILLA_SUFX}//}-bin|' \
${FAKEDIR}/bin/${MOZILLA_EXEC_NAME}*
.endif
@${REINPLACE_CMD} -e 's|${FAKEDIR}|${PREFIX}|g' \
${FAKEDIR}/bin/${MOZILLA_EXEC_NAME}*
${RM} -f ${FAKEDIR}/bin/*.bak
.endif
gecko-create-plist:
.if !defined(NOGECKO_PLIST)
# Create the plist
.for f in ${GECKO_PLIST_PRE_FILES}
${ECHO_CMD} ${f} >> ${PLISTF}
.endfor
.for f in ${GECKO_PLIST_PRE_DIRS}
${ECHO_CMD} "@dirrm ${f}" >> ${PLISTD}
.endfor
${MKDIR} ${FAKEDIR}/libdata
${MV} -f ${FAKEDIR}/lib/pkgconfig ${FAKEDIR}/libdata/ || ${TRUE}
${RM} -f ${FAKEDIR}/lib/pkgconfig
.for dir in ${MOZILLA_PLIST_DIRS}
@cd ${FAKEDIR}/${dir} && ${FIND} -H -s * -type f | \
${SED} -e 's|^|${dir}/|' >> ${PLISTF} && \
${FIND} -d * -type d | \
${SED} -e 's|^|@dirrm ${dir}/|' >> ${PLISTD}
.endfor
.for pcfile in ${MOZ_PKGCONFIG_FILES}
${ECHO_CMD} "libdata/pkgconfig/${pcfile}.pc" >> ${PLISTF}
@${REINPLACE_CMD} -e 's|${FAKEDIR}|${PREFIX}|g' \
-e 's|${MOZILLA}-nspr = ${PORTVERSION}|nspr|' \
${FAKEDIR}/libdata/pkgconfig/${pcfile}.pc
.endfor
${CAT} ${PLISTF} | ${SORT} >> ${PLIST}
${CAT} ${PLISTD} | ${SORT} -r >> ${PLIST}
${ECHO_CMD} "@dirrmtry share/idl" >> ${PLIST}
${ECHO_CMD} "@exec ${LOCALBASE}/bin/update-desktop-database > /dev/null || ${TRUE}" >> ${PLIST}
${ECHO_CMD} "@unexec ${LOCALBASE}/bin/update-desktop-database > /dev/null || ${TRUE}" >> ${PLIST}
.endif # !defined(NOGECKO_PLIST)
do-install: gecko-do-install
gecko-do-install:
.if !defined(NOGECKO_INSTALL)
.for dir in ${MOZILLA_PLIST_DIRS}
.if !exists(${PREFIX}/${dir})
${MKDIR} ${PREFIX}/${dir}
${CHMOD} 755 ${PREFIX}/${dir}
.endif
cd ${FAKEDIR}/${dir} && ${FIND} . | \
${CPIO} -pdm -L -R ${LIBOWN}:${LIBGRP} ${PREFIX}/${dir}
.endfor
.for pcfile in ${MOZ_PKGCONFIG_FILES}
${INSTALL_DATA} ${FAKEDIR}/libdata/pkgconfig/${pcfile}.pc \
${PREFIX}/libdata/pkgconfig/${pcfile}.pc
.endfor
.endif # !defined(NOGECKO_INSTALL)
gecko-moz-pis-pre-install:
.if defined(MOZ_PIS_SCRIPTS)
${MKDIR} ${FAKEDIR}/${MOZ_PIS_DIR}
.for moz in ${MOZ_PIS_SCRIPTS}
${INSTALL_SCRIPT} ${WRKDIR}/${moz} ${FAKEDIR}/${MOZ_PIS_DIR}
.endfor
.endif
post-install: gecko-post-install
gecko-post-install:
.if !defined(PACKAGE_BUILDING) && !defined(NO_MOZPKGINSTALL)
@if [ -e ${PKGINSTALL} ] ; then \
${SETENV} PKG_PREFIX=${PREFIX} ${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL; \
fi
.endif
@-update-desktop-database
.endif
.endif
# HERE THERE BE TACOS -- adamw