freebsd-ports/palm/pose/files/patch-gcc-3.3_fix
Pav Lucistnik a2b4da792d - Fix build on gcc-3.3, patch obtained from Gentoo ebuild
- USE_MESA -> USE_GL
- Fix coredump on ^C [1]
- Bump PORTREVISION

PR:		ports/63085 [1]
Submitted by:	Eric P. Scott <eps+posebug@ana.com> [1]
2004-03-13 23:40:46 +00:00

1726 lines
58 KiB
Plaintext

--- ../SrcShared/Hardware/EmRegs328.cpp 2002-03-29 05:11:18.000000000 -0800
+++ ../SrcShared/Hardware/EmRegs328.cpp 2004-01-27 00:06:45.000000000 -0800
@@ -97,13 +97,45 @@
const HwrM68328Type kInitial68328RegisterValues =
{
0x0C, // Byte scr; // $000: System Control Register
- { 0 }, // Byte ___filler0[0x004-0x001];
+ { 0,0,0 }, // Byte ___filler0[0x004-0x001];
// The following ID stuff is not present on earlier chips (before ??)
hwr328chipID328, // Byte chipID; // $004: Chip ID Register
hwr328maskID1H58B, // Byte maskID; // $005: Mask ID Register
0x00, // Word swID; // $006: Software ID Register
- { 0 }, // Byte ___filler1[0x100-0x008];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0
+ }, // Byte ___filler1[0x100-0x008];
0x0000, // Word csAGroupBase; // $100: Chip Select Group A Base Register
0x0000, // Word csBGroupBase; // $102: Chip Select Group B Base Register
@@ -136,18 +168,73 @@
0x00000000, // DWord csDSelect3; // $14C: Group D Chip Select 3 Register
0x0000, // Word csDebug; // $150: Chip Select debug register
- { 0 }, // Byte ___filler2[0x200-0x152];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0
+ }, // Byte ___filler2[0x200-0x152];
0x2400, // Word pllControl; // $200: PLL Control Register
0x0123, // Word pllFreqSel; // $202: PLL Frequency Select Register
0x0000, // Word pllTest; // $204: PLL Test Register
- { 0 }, // Byte __filler44;
+ 0x0000, // Byte __filler44;
0x1F, // Byte pwrControl; // $207: Power Control Register
- { 0 }, // Byte ___filler3[0x300-0x208];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0
+ }, // Byte ___filler3[0x300-0x208];
0x00, // Byte intVector; // $300: Interrupt Vector Register
- { 0 }, // Byte ___filler4;
+ 0x00, // Byte ___filler4;
0x0000, // Word intControl; // $302: Interrupt Control Register
0x00FF, // Word intMaskHi; // $304: Interrupt Mask Register/HIGH word
0xFFFF, // Word intMaskLo; // $306: Interrupt Mask Register/LOW word
@@ -158,36 +245,67 @@
0x0000, // Word intPendingHi; // $310: Interrupt Pending Register
0x0000, // Word intPendingLo; // $312: Interrupt Pending Register
- { 0 }, // Byte ___filler4a[0x400-0x314];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0
+ }, // Byte ___filler4a[0x400-0x314];
0x00, // Byte portADir; // $400: Port A Direction Register
0x00, // Byte portAData; // $401: Port A Data Register
- { 0 }, // Byte ___filler5;
+ 0x00, // Byte ___filler5;
0x00, // Byte portASelect; // $403: Port A Select Register
- { 0 }, // Byte ___filler6[4];
+ { 0,0,0,0 }, // Byte ___filler6[4];
0x00, // Byte portBDir; // $408: Port B Direction Register
0x00, // Byte portBData; // $409: Port B Data Register
- { 0 }, // Byte ___filler7;
+ 0x00, // Byte ___filler7;
0x00, // Byte portBSelect; // $40B: Port B Select Register
- { 0 }, // Byte ___filler8[4];
+ { 0,0,0,0 }, // Byte ___filler8[4];
0x00, // Byte portCDir; // $410: Port C Direction Register
0x00, // Byte portCData; // $411: Port C Data Register
- { 0 }, // Byte ___filler9;
+ 0x00, // Byte ___filler9;
0x00, // Byte portCSelect; // $413: Port C Select Register
- { 0 }, // Byte ___filler10[4];
+ { 0,0,0,0 }, // Byte ___filler10[4];
0x00, // Byte portDDir; // $418: Port D Direction Register
0x00, // Byte portDData; // $419: Port D Data Register
0xFF, // Byte portDPullupEn; // $41A: Port D Pull-up Enable
- { 0 }, // Byte ___filler11;
+ 0x00, // Byte ___filler11;
0x00, // Byte portDPolarity; // $41C: Port D Polarity Register
0x00, // Byte portDIntReqEn; // $41D: Port D Interrupt Request Enable
- { 0 }, // Byte ___filler12;
+ 0x00, // Byte ___filler12;
0x00, // Byte portDIntEdge; // $41F: Port D IRQ Edge Register
0x00, // Byte portEDir; // $420: Port E Direction Register
@@ -195,51 +313,106 @@
0x80, // Byte portEPullupEn; // $422: Port E Pull-up Enable
0x80, // Byte portESelect; // $423: Port E Select Register
- { 0 }, // Byte ___filler14[4];
+ { 0,0,0,0 }, // Byte ___filler14[4];
0x00, // Byte portFDir; // $428: Port F Direction Register
0x00, // Byte portFData; // $429: Port F Data Register
0xFF, // Byte portFPullupEn; // $42A: Port F Pull-up Enable
0xFF, // Byte portFSelect; // $42B: Port F Select Register
- { 0 }, // Byte ___filler16[4];
+ { 0,0,0,0 }, // Byte ___filler16[4];
0x00, // Byte portGDir; // $430: Port G Direction Register
0x00, // Byte portGData; // $431: Port G Data Register
0xFF, // Byte portGPullupEn; // $432: Port G Pull-up Enable
0xFF, // Byte portGSelect; // $433: Port G Select Register
- { 0 }, // Byte ___filler18[4];
+ { 0,0,0,0 }, // Byte ___filler18[4];
0x00, // Byte portJDir; // $438: Port J Direction Register
0x00, // Byte portJData; // $439: Port J Data Register
- { 0 }, // Byte ___filler19;
+ 0x00, // Byte ___filler19;
0x00, // Byte portJSelect; // $43B: Port J Select Register
- { 0 }, // Byte ___filler19a[4];
+ { 0,0,0,0 }, // Byte ___filler19a[4];
0x00, // Byte portKDir; // $440: Port K Direction Register
0x00, // Byte portKData; // $441: Port K Data Register
0x3F, // Byte portKPullupEn; // $442: Port K Pull-up Enable
0x3F, // Byte portKSelect; // $443: Port K Select Register
- { 0 }, // Byte ___filler21[4];
+ { 0,0,0,0 }, // Byte ___filler21[4];
0x00, // Byte portMDir; // $448: Port M Direction Register
0x00, // Byte portMData; // $449: Port M Data Register
0xFF, // Byte portMPullupEn; // $44A: Port M Pull-up Enable Register
0x02, // Byte portMSelect; // $44B: Port M Select Register
- { 0 }, // Byte ___filler22[4];
+ { 0,0,0,0 }, // Byte ___filler22[4];
- { 0 }, // Byte ___filler23[0x500-0x450];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0
+ }, // Byte ___filler23[0x500-0x450];
0x0000, // Word pwmControl; // $500: PWM Control Register
0x0000, // Word pwmPeriod; // $502: PWM Period Register
0x0000, // Word pwmWidth; // $504: PWM Width Register
0x0000, // Word pwmCounter; // $506: PWM Counter
- { 0 }, // Byte ___filler24[0x600-0x508];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0
+ }, // Byte ___filler24[0x600-0x508];
0x0000, // Word tmr1Control; // $600: Timer 1 Control Register
0x0000, // Word tmr1Prescaler; // $602: Timer 1 Prescaler Register
@@ -259,16 +432,112 @@
0x0000, // Word wdReference; // $61A: Watchdog Reference Register
0x0000, // Word wdCounter; // $61C: Watchdog Counter
- { 0 }, // Byte ___filler25[0x700-0x61E];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0
+ }, // Byte ___filler25[0x700-0x61E];
0x0000, // Word spiSlave; // $700: SPI Slave Register
- { 0 }, // Byte ___filler26[0x800-0x702];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0
+ }, // Byte ___filler26[0x800-0x702];
0x0000, // Word spiMasterData; // $800: SPI Master Data Register
0x0000, // Word spiMasterControl; // $802: SPI Master Control Register
- { 0 }, // Byte ___filler27[0x900-0x804];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0
+ }, // Byte ___filler27[0x900-0x804];
0x0000, // Word uControl; // $900: Uart Control Register
0x003F, // Word uBaud; // $902: Uart Baud Control Register
@@ -276,19 +545,54 @@
0x0000, // Word uTransmit; // $906: Uart Transmit Register
0x0000, // Word uMisc; // $908: Uart Miscellaneous Register
- { 0 }, // Byte ___filler28[0xA00-0x90A];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0
+ }, // Byte ___filler28[0xA00-0x90A];
0x00000000, // DWord lcdStartAddr; // $A00: Screen Starting Address Register
- { 0 }, // Byte ___filler29;
+ 0x00, // Byte ___filler29;
0xFF, // Byte lcdPageWidth; // $A05: Virtual Page Width Register
- { 0 }, // Byte ___filler30[2];
+ { 0,0 }, // Byte ___filler30[2];
0x03FF, // Word lcdScreenWidth; // $A08: Screen Width Register
0x01FF, // Word lcdScreenHeight; // $A0A: Screen Height Register
- { 0 }, // Byte ___filler31[0xA18-0xA0C];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0
+ }, // Byte ___filler31[0xA18-0xA0C];
0x0000, // Word lcdCursorXPos; // $A18: Cursor X Position
0x0000, // Word lcdCursorYPos; // $A1A: Cursor Y Position
0x0101, // Word lcdCursorWidthHeight; // $A1C: Cursor Width and Height
- { 0 }, // Byte ___filler32;
+ 0x00, // Byte ___filler32;
0x7F, // Byte lcdBlinkControl; // $A1F: Blink Control Register
0x00, // Byte lcdPanelControl; // $A20: Panel Interface Control Register
0x00, // Byte lcdPolarity; // $A21: Polarity Config Register
@@ -304,12 +608,39 @@
0x3F, // Byte lcdOctetTermCount; // $A2B: Octet Terminal Count Register
0x00, // Byte ___filler38;
0x00, // Byte lcdPanningOffset; // $A2D: Panning Offset Register
- { 0 }, // Byte ___filler39[3];
+ { 0,0,0 }, // Byte ___filler39[3];
0xB9, // Byte lcdFrameRate; // $A31: Frame Rate Control Modulation Register
0x1073, // Word lcdGrayPalette; // $A32: Gray Palette Mapping Register
0x00, // Byte lcdReserved; // $A34: Reserved
- { 0 }, // Byte ___filler40[0xB00-0xA35];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0
+ }, // Byte ___filler40[0xB00-0xA35];
0x00000000, // DWord rtcHourMinSec; // $B00: RTC Hours, Minutes, Seconds Register
0x00000000, // DWord rtcAlarm; // $B04: RTC Alarm Register
--- ../SrcShared/Hardware/EmRegsEZ.cpp 2002-03-29 05:11:18.000000000 -0800
+++ ../SrcShared/Hardware/EmRegsEZ.cpp 2004-01-27 00:06:45.000000000 -0800
@@ -59,18 +59,21 @@
static const HwrM68EZ328Type kInitial68EZ328RegisterValues =
{
0x1C, // Byte scr; // $000: System Control Register
- { 0 }, // Byte ___filler0[0x004-0x001];
+ { 0,0,0 }, // Byte ___filler0[0x004-0x001];
hwrEZ328chipIDEZ, // Byte chipID; // $004: Chip ID Register
hwrEZ328maskID1J83G, // Byte maskID; // $005: Mask ID Register
0x00, // Word swID; // $006: Software ID Register
- { 0 }, // Byte ___filler1[0x100-0x008];
+ {
+ }, // Byte ___filler1[0x100-0x008];
0x0000, // Word csAGroupBase; // $100: Chip Select Group A Base Register
0x0000, // Word csBGroupBase; // $102: Chip Select Group B Base Register
0x0000, // Word csCGroupBase; // $104: Chip Select Group C Base Register
0x0000, // Word csDGroupBase; // $106: Chip Select Group D Base Register
- { 0 }, // Byte ___filler6[0x110-0x108];
+ {
+ 0,0,0,0,0,0,0,0
+ }, // Byte ___filler6[0x110-0x108];
0x00E0, // Word csASelect; // $110: Group A Chip Select Register
0x0000, // Word csBSelect; // $112: Group B Chip Select Register
@@ -79,47 +82,50 @@
0x0060, // Word emuCS; // $118: EMU Chip Select Register
- { 0 }, // Byte ___filler2[0x200-0x11A];
+ {
+ }, // Byte ___filler2[0x200-0x11A];
0x2430, // Word pllControl; // $200: PLL Control Register
0x0123, // Word pllFreqSel; // $202: PLL Frequency Select Register
0, // !!! ---> Marked as reserved in 1.4 Word pllTest; // $204: PLL Test Register (do not access)
- { 0 }, // Byte ___filler44;
+ 0x00, // Byte ___filler44;
0x1F, // Byte pwrControl; // $207: Power Control Register
- { 0 }, // Byte ___filler3[0x300-0x208];
+ {
+ }, // Byte ___filler3[0x300-0x208];
0x00, // Byte intVector; // $300: Interrupt Vector Register
- { 0 }, // Byte ___filler4;
+ 0x00, // Byte ___filler4;
0x0000, // Word intControl; // $302: Interrupt Control Register
0x00FF, // Word intMaskHi; // $304: Interrupt Mask Register/HIGH word
0xFFFF, // Word intMaskLo; // $306: Interrupt Mask Register/LOW word
- { 0 }, // Byte ___filler7[0x30c-0x308];
+ { 0,0,0,0 }, // Byte ___filler7[0x30c-0x308];
0x0000, // Word intStatusHi; // $30C: Interrupt Status Register/HIGH word
0x0000, // Word intStatusLo; // $30E: Interrupt Status Register/LOW word
0x0000, // Word intPendingHi; // $310: Interrupt Pending Register
0x0000, // Word intPendingLo; // $312: Interrupt Pending Register
- { 0 }, // Byte ___filler4a[0x400-0x314];
+ {
+ }, // Byte ___filler4a[0x400-0x314];
0x00, // Byte portADir; // $400: Port A Direction Register
0x00, // Byte portAData; // $401: Port A Data Register
0xFF, // Byte portAPullupEn; // $402: Port A Pullup Enable (similar to Select on DB)
- { 0 }, // Byte ___filler8[5];
+ { 0,0,0,0,0 }, // Byte ___filler8[5];
0x00, // Byte portBDir; // $408: Port B Direction Register
0x00, // Byte portBData; // $409: Port B Data Register
0xFF, // Byte portBPullupEn; // $40A: Port B Pullup Enable
0xFF, // Byte portBSelect; // $40B: Port B Select Register
- { 0 }, // Byte ___filler9[4];
+ { 0,0,0,0 }, // Byte ___filler9[4];
0x00, // Byte portCDir; // $410: Port C Direction Register
0x00, // Byte portCData; // $411: Port C Data Register
0xFF, // Byte portCPulldnEn; // $412: Port C Pulldown Enable
0xFF, // Byte portCSelect; // $413: Port C Select Register
- { 0 }, // Byte ___filler10[4];
+ { 0,0,0,0 }, // Byte ___filler10[4];
0x00, // Byte portDDir; // $418: Port D Direction Register
0x00, // Byte portDData; // $419: Port D Data Register
@@ -135,21 +141,48 @@
0xFF, // Byte portEPullupEn; // $422: Port E Pull-up Enable
0xFF, // Byte portESelect; // $423: Port E Select Register
- { 0 }, // Byte ___filler14[4];
+ { 0,0,0,0 }, // Byte ___filler14[4];
0x00, // Byte portFDir; // $428: Port F Direction Register
0x00, // Byte portFData; // $429: Port F Data Register
0xFF, // Byte portFPullupdnEn; // $42A: Port F Pull-up/down Enable
0x00, // Byte portFSelect; // $42B: Port F Select Register
- { 0 }, // Byte ___filler16[4];
+ { 0,0,0,0 }, // Byte ___filler16[4];
0x00, // Byte portGDir; // $430: Port G Direction Register
0x00, // Byte portGData; // $431: Port G Data Register
0x3D, // Byte portGPullupEn; // $432: Port G Pull-up Enable
0x08, // Byte portGSelect; // $433: Port G Select Register
- { 0 }, // Byte ___filler2000[0x500-0x434];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0
+ }, // Byte ___filler2000[0x500-0x434];
0x0020, // Word pwmControl; // $500: PWM Control Register
0x00, // Byte pwmSampleHi; // $502: PWM Sample - high byte
@@ -157,7 +190,40 @@
0xFE, // Byte pwmPeriod; // $504: PWM Period
0x00, // Byte pwmCounter; // $505: PWM Counter
- { 0 }, // Byte ___filler24[0x600-0x506];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0
+ }, // Byte ___filler24[0x600-0x506];
0x0000, // Word tmr1Control; // $600: Timer 1 Control Register
0x0000, // Word tmr1Prescaler; // $602: Timer 1 Prescaler Register
@@ -166,12 +232,107 @@
0x0000, // Word tmr1Counter; // $608: Timer 1 Counter Register
0x0000, // Word tmr1Status; // $60A: Timer 1 Status Register
- { 0 }, // Byte ___filler25[0x800-0x61E];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0
+ }, // Byte ___filler25[0x800-0x61E];
0x0000, // Word spiMasterData; // $800: SPI Master Data Register
0x0000, // Word spiMasterControl; // $802: SPI Master Control Register
- { 0 }, // Byte ___filler27[0x900-0x804];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0
+ }, // Byte ___filler27[0x900-0x804];
0x0000, // Word uControl; // $900: Uart Control Register
0x003F, // Word uBaud; // $902: Uart Baud Control Register
@@ -180,62 +341,188 @@
0x0000, // Word uMisc; // $908: Uart Miscellaneous Register
0x0000, // Word uNonIntPresc; // $90A: Uart IRDA Non-Integer Prescaler
- { 0 }, // Byte ___filler28[0xA00-0x90C];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0
+ }, // Byte ___filler28[0xA00-0x90C];
0x00000000, // DWord lcdStartAddr; // $A00: Screen Starting Address Register
- { 0 }, // Byte ___filler29;
+ 0x00, // Byte ___filler29;
0xFF, // Byte lcdPageWidth; // $A05: Virtual Page Width Register
- { 0 }, // Byte ___filler30[2];
+ { 0,0 }, // Byte ___filler30[2];
0x03FF, // Word lcdScreenWidth; // $A08: Screen Width Register
0x01FF, // Word lcdScreenHeight; // $A0A: Screen Height Register
- { 0 }, // Byte ___filler31[0xA18-0xA0C];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0
+ }, // Byte ___filler31[0xA18-0xA0C];
0x0000, // Word lcdCursorXPos; // $A18: Cursor X Position
0x0000, // Word lcdCursorYPos; // $A1A: Cursor Y Position
0x0101, // Word lcdCursorWidthHeight; // $A1C: Cursor Width and Height
- { 0 }, // Byte ___filler32;
+ 0x00, // Byte ___filler32;
0x7F, // Byte lcdBlinkControl; // $A1F: Blink Control Register
0x00, // Byte lcdPanelControl; // $A20: Panel Interface Control Register
0x00, // Byte lcdPolarity; // $A21: Polarity Config Register
- { 0 }, // Byte ___filler33;
+ 0x00, // Byte ___filler33;
0x00, // Byte lcdACDRate; // $A23: ACD (M) Rate Control Register
- { 0 }, // Byte ___filler34;
+ 0x00, // Byte ___filler34;
0x00, // Byte lcdPixelClock; // $A25: Pixel Clock Divider Register
- { 0 }, // Byte ___filler35;
+ 0x00, // Byte ___filler35;
0x40, // Byte lcdClockControl; // $A27: Clocking Control Register
- { 0 }, // Byte ___filler36;
+ 0x00, // Byte ___filler36;
0xFF, // Byte lcdRefreshRateAdj; // $A29: Refresh Rate Adjustment Register
- { 0 }, // Byte ___filler2003[0xA2D-0xA2A];
+ { 0,0,0 }, // Byte ___filler2003[0xA2D-0xA2A];
0x00, // Byte lcdPanningOffset; // $A2D: Panning Offset Register
- { 0 }, // Byte ___filler37[0xA31-0xA2E];
+ { 0,0,0 }, // Byte ___filler37[0xA31-0xA2E];
0xB9, // Byte lcdFrameRate; // $A31: Frame Rate Control Modulation Register
- { 0 }, // Byte ___filler2004;
+ 0x00, // Byte ___filler2004;
0x84, // Byte lcdGrayPalette; // $A33: Gray Palette Mapping Register
0x00, // Byte lcdReserved; // $A34: Reserved
- { 0 }, // Byte ___filler2005;
+ 0x00, // Byte ___filler2005;
0x0000, // Word lcdContrastControlPWM; // $A36: Contrast Control
- { 0 }, // Byte ___filler40[0xB00-0xA38];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ }, // Byte ___filler40[0xB00-0xA38];
0x00000000, // DWord rtcHourMinSec; // $B00: RTC Hours, Minutes, Seconds Register
0x00000000, // DWord rtcAlarm; // $B04: RTC Alarm Register
- { 0 }, // Byte ___filler2001[0xB0A-0xB08];
+ { 0,0 }, // Byte ___filler2001[0xB0A-0xB08];
0x0001, // Word rtcWatchDog; // $B0A: RTC Watchdog Timer
0x00, // Word rtcControl; // $B0C: RTC Control Register
0x00, // Word rtcIntStatus; // $B0E: RTC Interrupt Status Register
0x00, // Word rtcIntEnable; // $B10: RTC Interrupt Enable Register
0x00, // Word stopWatch; // $B12: Stopwatch Minutes
- { 0 }, // Byte ___filler2002[0xB1A-0xB14];
+ {
+ 0,0,0,0,0,0
+ }, // Byte ___filler2002[0xB1A-0xB14];
0x0000, // Word rtcDay; // $B1A: RTC Day
0x0000, // Word rtcDayAlarm; // $B1C: RTC Day Alarm
- { 0 }, // Byte ___filler41[0xC00-0xB1E];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0
+ }, // Byte ___filler41[0xC00-0xB1E];
0x0000, // Word dramConfig; // $C00: DRAM Memory Config Register
0x0000, // Word dramControl; // $C02: DRAM Control Register
- { 0 }, // Byte ___filler42[0xD00-0xC04];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0
+ }, // Byte ___filler42[0xD00-0xC04];
0x00000000, // DWord emuAddrCompare; // $D00: Emulation Address Compare Register
0x00000000, // DWord emuAddrMask; // $D04: Emulation Address Mask Register
--- ../SrcShared/Hardware/EmRegsVZ.cpp 2002-03-29 05:11:19.000000000 -0800
+++ ../SrcShared/Hardware/EmRegsVZ.cpp 2004-01-27 00:06:45.000000000 -0800
@@ -74,7 +74,7 @@
{
0x1C, // UInt8 scr; // $000: System Control Register
- { 0 }, // UInt8 ___filler0[0x003-0x001];
+ { 0,0 }, // UInt8 ___filler0[0x003-0x001];
0x00, // UInt8 pcr; // $003: Peripheral Control Register
0x56, // UInt8 chipID; // $004: Chip ID Register
@@ -82,7 +82,39 @@
0x0000, // UInt16 swID; // $006: Software ID Register
0x1FFF, // UInt16 ioDriveControl; // $008: I/O Drive Control Register
- { 0 }, // UInt8 ___filler1[0x100-0x00A];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0
+ }, // UInt8 ___filler1[0x100-0x00A];
0x0000, // UInt16 csAGroupBase; // $100: Chip Select Group A Base Register
0x0000, // UInt16 csBGroupBase; // $102: Chip Select Group B Base Register
@@ -94,7 +126,7 @@
0x0000, // UInt16 csControl1; // $10A: Chip Select Control Register
0x0000, // UInt16 csControl2; // $10C: Chip Select Control Register
- { 0 }, // UInt8 ___filler2[0x110-0x10c];
+ { 0,0 }, // UInt8 ___filler2[0x110-0x10E];
0x00B0, // UInt16 csASelect; // $110: Group A Chip Select Register
0x0000, // UInt16 csBSelect; // $112: Group B Chip Select Register
@@ -103,54 +135,148 @@
0x0060, // UInt16 emuCS; // $118: EMU Chip Select Register
- { 0 }, // UInt8 ___filler3[0x200-0x11A];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0
+ }, // UInt8 ___filler3[0x150-0x11A];
0x0000, // UInt16 csControl3; // $150: Chip Select Control Register
- { 0 }, // UInt8 ___filler3[0x200-0x11A];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0
+ }, // UInt8 ___filler3a[0x200-0x152];
0x24B3, // UInt16 pllControl; // $200: PLL Control Register
0x0123, // UInt16 pllFreqSel; // $202: CGM Frequency Select Register
- { 0 }, // UInt8 ___filler4[0x207-0x204];
+ { 0,0,0 }, // UInt8 ___filler4[0x207-0x204];
0x1F, // UInt8 pwrControl; // $207: Power Control Register
- { 0 }, // UInt8 ___filler5[0x300-0x208];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0
+ }, // UInt8 ___filler5[0x300-0x208];
0x00, // UInt8 intVector; // $300: Interrupt Vector Register
0x00, // UInt8 ___filler6;
0x0000, // UInt16 intControl; // $302: Interrupt Control Register
0x00FF, // UInt16 intMaskHi; // $304: Interrupt Mask Register/HIGH word
0xFFFF, // UInt16 intMaskLo; // $306: Interrupt Mask Register/LOW word
- { 0 }, // UInt8 ___filler7[0x30c-0x308];
+ { 0,0,0,0 }, // UInt8 ___filler7[0x30c-0x308];
0x0000, // UInt16 intStatusHi; // $30C: Interrupt Status Register/HIGH word
0x0000, // UInt16 intStatusLo; // $30E: Interrupt Status Register/LOW word
0x0000, // UInt16 intPendingHi; // $310: Interrupt Pending Register/HIGH word
0x0000, // UInt16 intPendingLo; // $312: Interrupt Pending Register/LOW word
0x6533, // UInt16 intLevelControl; // $314: Interrupt Level Control Register
- { 0 }, // UInt8 ___filler4a[0x400-0x316];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0
+ }, // UInt8 ___filler4a[0x400-0x316];
0x00, // UInt8 portADir; // $400: Port A Direction Register
0x00, // UInt8 portAData; // $401: Port A Data Register
0xFF, // UInt8 portAPullupEn; // $402: Port A Pullup Enable
- { 0 }, // UInt8 ___filler8[5];
+ { 0,0,0,0,0 }, // UInt8 ___filler8[5];
0x00, // UInt8 portBDir; // $408: Port B Direction Register
0x00, // UInt8 portBData; // $409: Port B Data Register
0xFF, // UInt8 portBPullupEn; // $40A: Port B Pullup Enable
0xFF, // UInt8 portBSelect; // $40B: Port B Select Register
- { 0 }, // UInt8 ___filler9[4];
+ { 0,0,0,0 }, // UInt8 ___filler9[4];
0x00, // UInt8 portCDir; // $410: Port C Direction Register
0x00, // UInt8 portCData; // $411: Port C Data Register
0xFF, // UInt8 portCPulldnEn; // $412: Port C Pulldown Enable
0xFF, // UInt8 portCSelect; // $413: Port C Select Register
- { 0 }, // UInt8 ___filler10[4];
+ { 0,0,0,0 }, // UInt8 ___filler10[4];
0x00, // UInt8 portDDir; // $418: Port D Direction Register
0x00, // UInt8 portDData; // $419: Port D Data Register
@@ -166,42 +292,66 @@
0xFF, // UInt8 portEPullupEn; // $422: Port E Pull-up Enable
0xFF, // UInt8 portESelect; // $423: Port E Select Register
- { 0 }, // UInt8 ___filler14[4];
+ { 0,0,0,0 }, // UInt8 ___filler14[4];
0x00, // UInt8 portFDir; // $428: Port F Direction Register
0x00, // UInt8 portFData; // $429: Port F Data Register
0xFF, // UInt8 portFPullupdnEn; // $42A: Port F Pull-up/down Enable
0x8F, // UInt8 portFSelect; // $42B: Port F Select Register
- { 0 }, // UInt8 ___filler16[4];
+ { 0,0,0,0 }, // UInt8 ___filler16[4];
0x00, // UInt8 portGDir; // $430: Port G Direction Register
0x00, // UInt8 portGData; // $431: Port G Data Register
0x3D, // UInt8 portGPullupEn; // $432: Port G Pull-up Enable
0x08, // UInt8 portGSelect; // $433: Port G Select Register
- { 0 }, // UInt8 ___filler17[0x438-0x434];
+ { 0,0,0,0 }, // UInt8 ___filler17[0x438-0x434];
0x00, // UInt8 portJDir; // $438: Port J Direction Register
0x00, // UInt8 portJData; // $439: Port J Data Register
0xFF, // UInt8 portJPullupEn; // $43A: Port J Pull-up Enable
0xEF, // UInt8 portJSelect; // $43B: Port J Select Register
- { 0 }, // UInt8 ___filler18[0x440-0x43C];
+ { 0,0,0,0 }, // UInt8 ___filler18[0x440-0x43C];
0x00, // UInt8 portKDir; // $440: Port K Direction Register
0x00, // UInt8 portKData; // $441: Port K Data Register
0xFF, // UInt8 portKPullupdnEn; // $442: Port K Pull-up/down Enable
0xFF, // UInt8 portKSelect; // $443: Port K Select Register
- { 0 }, // UInt8 ___filler19[0x448-0x444];
+ { 0,0,0,0 }, // UInt8 ___filler19[0x448-0x444];
0x00, // UInt8 portMDir; // $448: Port M Direction Register
0x00, // UInt8 portMData; // $449: Port M Data Register
0x3F, // UInt8 portMPullupdnEn; // $44A: Port M Pull-up/down Enable
0x3F, // UInt8 portMSelect; // $44B: Port M Select Register
- { 0 }, // UInt8 ___filler20[0x500-0x44C];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0
+ }, // UInt8 ___filler20[0x500-0x44C];
0x0020, // UInt16 pwmControl; // $500: PWM 1 Control Register (PWM 1 is the same as the single PWM in EZ)
0x00, // UInt8 pwmSampleHi; // $502: PWM 1 Sample - high byte
@@ -209,14 +359,47 @@
0xFE, // UInt8 pwmPeriod; // $504: PWM 1 Period
0x00, // UInt8 pwmCounter; // $505: PWM 1 Counter
- { 0 }, // UInt8 ___filler22[0x510-0x506];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0
+ }, // UInt8 ___filler22[0x510-0x506];
0x0000, // UInt16 pwm2Control; // $510: PWM 2 Control Register
0x0000, // UInt16 pwm2Period; // $512: PWM 2 Period
0x0000, // UInt16 pwm2Width; // $514: PWM 2 Width
0x0000, // UInt16 pwm2Counter; // $516: PWM 2 Counter
- { 0 }, // UInt8 ___filler23[0x600-0x518];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0
+ }, // UInt8 ___filler23[0x600-0x518];
0x0000, // UInt16 tmr1Control; // $600: Timer 1 Control Register
0x0000, // UInt16 tmr1Prescaler; // $602: Timer 1 Prescaler Register
@@ -225,7 +408,7 @@
0x0000, // UInt16 tmr1Counter; // $608: Timer 1 Counter Register
0x0000, // UInt16 tmr1Status; // $60A: Timer 1 Status Register
- { 0 }, // UInt8 ___filler24[0x610-0x60C];
+ { 0,0,0,0 }, // UInt8 ___filler24[0x610-0x60C];
0x0000, // UInt16 tmr2Control; // $610: Timer 2 Control Register
0x0000, // UInt16 tmr2Prescaler; // $612: Timer 2 Prescaler Register
@@ -234,7 +417,37 @@
0x0000, // UInt16 tmr2Counter; // $618: Timer 2 Counter Register
0x0000, // UInt16 tmr2Status; // $61A: Timer 2 Status Register
- { 0 }, // UInt8 ___filler25[0x700-0x61C];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0
+ }, // UInt8 ___filler25[0x700-0x61C];
0x0000, // UInt16 spiRxD; // $700: SPI Unit 1 Receive Data Register
0x0000, // UInt16 spiTxD; // $702: SPI Unit 1 Transmit Data Register
@@ -243,12 +456,77 @@
0x0000, // UInt16 spiTest; // $708: SPI Unit 1 Test Register
0x0000, // UInt16 spiSpc; // $70A: SPI Unit 1 Sample period counter register
- { 0 }, // UInt8 ___filler26[0x800-0x706];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0
+ }, // UInt8 ___filler26[0x800-0x70C];
0x0000, // UInt16 spiMasterData; // $800: SPI Unit 2 Data Register (SPI 2 is the same as the single SPI Master in EZ)
0x0000, // UInt16 spiMasterControl; // $802: SPI Unit 2 Control/Status Register
- { 0 }, // UInt8 ___filler27[0x900-0x804];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0
+ }, // UInt8 ___filler27[0x900-0x804];
0x0000, // UInt16 uControl; // $900: Uart 1 Status/Control Register (Uart 1 is the same as the single Uart in EZ)
0x003F, // UInt16 uBaud; // $902: Uart 1 Baud Control Register
@@ -257,7 +535,7 @@
0x0000, // UInt16 uMisc; // $908: Uart 1 Miscellaneous Register
0x0000, // UInt16 uNonIntPresc; // $90A: Uart 1 Non-Integer Prescaler
- { 0 }, // UInt8 ___filler28[0x910-0x90C];
+ { 0,0,0,0 }, // UInt8 ___filler28[0x910-0x90C];
0x0000, // UInt16 u2Control; // $910: Uart 2 Status/Control Register
0x003F, // UInt16 u2Baud; // $912: Uart 2 Baud Control Register
@@ -267,67 +545,190 @@
0x0000, // UInt16 u2NonIntPresc; // $91A: Uart 2 Non-Integer Prescaler
0x0000, // UInt16 u2FIFOHMark; // $91C: Uart 2 Half Mark FIFO Register
- { 0 }, // UInt8 ___filler28a[0xA00-0x91E];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0
+ }, // UInt8 ___filler28a[0xA00-0x91E];
0x00000000, // UInt32 lcdStartAddr; // $A00: Screen Starting Address Register
- { 0 }, // UInt8 ___filler29;
+ 0x00, // UInt8 ___filler29;
0xFF, // UInt8 lcdPageWidth; // $A05: Virtual Page Width Register
- { 0 }, // UInt8 ___filler30[2];
+ { 0,0 }, // UInt8 ___filler30[2];
0x03F0, // UInt16 lcdScreenWidth; // $A08: Screen Width Register
0x01FF, // UInt16 lcdScreenHeight; // $A0A: Screen Height Register
- { 0 }, // UInt8 ___filler31[0xA18-0xA0C];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0
+ }, // UInt8 ___filler31[0xA18-0xA0C];
0x0000, // UInt16 lcdCursorXPos; // $A18: Cursor X Position
0x0000, // UInt16 lcdCursorYPos; // $A1A: Cursor Y Position
0x0101, // UInt16 lcdCursorWidthHeight; // $A1C: Cursor Width and Height
- { 0 }, // UInt8 ___filler32;
+ 0x00, // UInt8 ___filler32;
0x7F, // UInt8 lcdBlinkControl; // $A1F: Blink Control Register
0x00, // UInt8 lcdPanelControl; // $A20: Panel Interface Configuration Register
0x00, // UInt8 lcdPolarity; // $A21: Polarity Config Register
- { 0 }, // UInt8 ___filler33;
+ 0x00, // UInt8 ___filler33;
0x00, // UInt8 lcdACDRate; // $A23: ACD (M) Rate Control Register
- { 0 }, // UInt8 ___filler34;
+ 0x00, // UInt8 ___filler34;
0x00, // UInt8 lcdPixelClock; // $A25: Pixel Clock Divider Register
- { 0 }, // UInt8 ___filler35;
+ 0x00, // UInt8 ___filler35;
0x00, // UInt8 lcdClockControl; // $A27: Clocking Control Register
0x00FF, // UInt16 lcdRefreshRateAdj; // $A28: Refresh Rate Adjustment Register
- { 0 }, // UInt8 ___filler37;
+ 0x00, // UInt8 ___filler37;
0x00, // UInt8 lcdReserved1; // $A2B: Reserved
- { 0 }, // UInt8 ___filler38;
+ 0x00, // UInt8 ___filler38;
0x00, // UInt8 lcdPanningOffset; // $A2D: Panning Offset Register
- { 0 }, // UInt8 ___filler39[0xA31-0xA2E];
+ { 0,0,0 }, // UInt8 ___filler39[0xA31-0xA2E];
0x00, // UInt8 lcdFrameRate; // $A31: Frame Rate Control Modulation Register
- { 0 }, // UInt8 ___filler2004;
+ 0x00, // UInt8 ___filler2004;
0x84, // UInt8 lcdGrayPalette; // $A33: Gray Palette Mapping Register
0x00, // UInt8 lcdReserved2; // $A34: Reserved
- { 0 }, // UInt8 ___filler2005;
+ 0x00, // UInt8 ___filler2005;
0x0000, // UInt16 lcdContrastControlPWM; // $A36: Contrast Control
0x00, // UInt8 lcdRefreshModeControl; // $A38: Refresh Mode Control Register
0x62, // UInt8 lcdDMAControl; // $A39: DMA Control Register
- { 0 }, // UInt8 ___filler40[0xB00-0xA3a];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0
+ }, // UInt8 ___filler40[0xB00-0xA3a];
0x00000000, // UInt32 rtcHourMinSec; // $B00: RTC Hours, Minutes, Seconds Register
0x00000000, // UInt32 rtcAlarm; // $B04: RTC Alarm Register
- { 0 }, // UInt8 ___filler2001[0xB0A-0xB08];
+ { 0,0 }, // UInt8 ___filler2001[0xB0A-0xB08];
0x0001, // UInt16 rtcWatchDog; // $B0A: RTC Watchdog Timer
0x0080, // UInt16 rtcControl; // $B0C: RTC Control Register
0x0000, // UInt16 rtcIntStatus; // $B0E: RTC Interrupt Status Register
0x0000, // UInt16 rtcIntEnable; // $B10: RTC Interrupt Enable Register
0x003F, // UInt16 stopWatch; // $B12: Stopwatch Minutes
- { 0 }, // UInt8 ___filler2002[0xB1A-0xB14];
+ {
+ 0,0,0,0,0,0
+ }, // UInt8 ___filler2002[0xB1A-0xB14];
0x0000, // UInt16 rtcDay; // $B1A: RTC Day
0x0000, // UInt16 rtcDayAlarm; // $B1C: RTC Day Alarm
- { 0 }, // UInt8 ___filler41[0xC00-0xB1E];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0
+ }, // UInt8 ___filler41[0xC00-0xB1E];
0x0000, // UInt16 dramConfig; // $C00: DRAM Memory Config Register
0x003C, // UInt16 dramControl; // $C02: DRAM Control Register
0x0000, // UInt16 sdramControl; // $C04: SDRAM Control Register
0x0000, // UInt16 sdramPwDn; // $C06: SDRAM Power Down Register
- { 0 }, // UInt8 ___filler42[0xD00-0xC08];
+ {
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0
+ }, // UInt8 ___filler42[0xD00-0xC08];
0x00000000, // UInt32 emuAddrCompare; // $D00: Emulation Address Compare Register
0x00000000, // UInt32 emuAddrMask; // $D04: Emulation Address Mask Register