cpet/freebsd-ports
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1fe9749d83
freebsd-ports/Mk/Uses/qt-dist.mk
Tobias C. Berner 1fe9749d83 Qt: Update Qt 5 to 5.15.8 
- update distfiles to be rebased on the Qt 5.15.8 branch

PR:		268773
Exp-run by:	antoine
2023-01-14 22:15:14 +01:00

523 lines
19 KiB
Makefile
Raw Blame History

# There are three Qt related USES files with different access to Qt.
# - qmake: The port requires Qt's qmake to build -- creates the configure target
# - auto includes qt.mk
# - qt-dist: The port is a port for a part of Qt
# - auto includes qt.mk
# - qt.mk - Dependency handling. USE_QT=foo bar
#
#
# Usage
# qt-dist:<version>[,yes|modulename]
#
# MAINTAINER: kde@FreeBSD.org
.if !defined(_QT_DIST_MK_INCLUDED)
_QT_DIST_MK_INCLUDED= qt-dist.mk
# Suck in qt.mk and qmake.mk
qt_ARGS?= # empty
.include "${USESDIR}/qt.mk"
qmake_ARGS?= # empty
.include "${USESDIR}/qmake.mk"
# Supported distribution arguments
_COMMON_DISTS= 3d base charts datavis3d declarative imageformats multimedia \
networkauth quick3d quicktimeline remoteobjects scxml sensors \
serialbus serialport svg tools translations virtualkeyboard \
wayland webchannel webengine websockets
_QT5_DISTS= connectivity gamepad graphicaleffects location quickcontrols \
quickcontrols2 script speech webglplugin webview \
x11extras xmlpatterns
_QT6_DISTS= 5compat doc languageserver lottie positioning shadertools
_QT_DISTS= ${_COMMON_DISTS} \
${_QT${_QT_VER}_DISTS}
# We only accept one item as an argument. The fetch target further below works
# around this.
_QT_DIST= # empty
. for dist in ${_QT_DISTS:O:u}
. if ${qt-dist_ARGS:M${dist}}
. if empty(_QT_DIST)
_QT_DIST= ${dist}
. else
IGNORE= cannot be installed: different Qt dists specified via qt-dist:[${qt-dist_ARGS:S/ /,/g}]
. endif
. endif
. endfor
# Fall back to sensible defaults for _QT_DIST
. if empty(_QT_DIST)
_QT_DIST= ${PORTNAME} # don't force qt-dist to be set for Qt5 ports which 75% of time are ${PORTNAME}
. endif
# Check validitiy
. if empty(_QT_DISTS:M${_QT_DIST})
IGNORE= Unsupported qt-dist ${_QT_DIST} for qt:${_QT_VER}
. endif
################################################################################
# Set standard bsd.port.mk variables.
LICENSE?= LGPL21
WWW?= https://www.qt.io/
. if !exists(${PKGDIR}/pkg-descr)
DESCR?= ${PORTSDIR}/devel/${_QT_RELNAME}/pkg-descr
. endif
# Stage support.
_QT5_DESTDIRNAME= INSTALL_ROOT
_QT6_DESTDIRNAME= DESTDIR
DESTDIRNAME= ${_QT${_QT_VER}_DESTDIRNAME}
# Qt's tarballs are xz compressed.
. if empty(USES:Mtar)
EXTRACT_SUFX?= .tar.xz
. endif
# Qt5 specific master sites
_QT5_MASTER_SITES_kde= LOCAL
_QT5_MASTER_SITE_SUBDIR_kde= kde/KDE/Qt/${_QT_VERSION}
_QT5_MASTER_SITES= ${MASTER_SITE_QT}
_QT5_MASTER_SITE_SUBDIR= official_releases/qt/${_QT_VERSION:R}/${_QT_VERSION}/submodules/
# Qt6 specific master sites
_QT6_MASTER_SITES= ${MASTER_SITE_QT}
_QT6_MASTER_SITE_SUBDIR= official_releases/qt/${_QT_VERSION:R}/${_QT_VERSION}/submodules \
official_releases/additional_libraries/${_QT_VERSION:R}/${_QT_VERSION}/
# Qt5 specific distnames
_QT5_DISTNAME= ${_QT_DIST:S,^,qt,:S,$,-everywhere-src-${DISTVERSION},}
_QT5_DISTNAME_kde= ${_QT_DIST:S,^,kde-qt,:S,$,-${DISTVERSION},}
# Qt6 specific distnames
_QT6_DISTNAME= ${_QT_DIST:S,^,qt,:S,$,-everywhere-src-${DISTVERSION},}
# Effective master sites and disfile valus
MASTER_SITES= ${_QT${_QT_VER}_MASTER_SITES${_KDE_${_QT_DIST}:D_kde}}
MASTER_SITE_SUBDIR= ${_QT${_QT_VER}_MASTER_SITE_SUBDIR${_KDE_${_QT_DIST}:D_kde}}
DISTNAME= ${_QT${_QT_VER}_DISTNAME${_KDE_${_QT_DIST}:D_kde}}
DISTFILES= ${DISTNAME:S,$,${EXTRACT_SUFX},}
DIST_SUBDIR= KDE/Qt/${_QT_VERSION}
. if ${_QT_VER:M5}
# KDE maintains a repository with a patched Qt5 distribution.
_KDE_3d= 0
_KDE_base= 157
_KDE_charts= 0
_KDE_connectivity= 5
_KDE_datavis3d= 0
_KDE_declarative= 21
_KDE_gamepad= 0
_KDE_graphicaleffects= 0
_KDE_imageformats= 6
_KDE_location= 3
_KDE_multimedia= 1
_KDE_networkauth= 0
_KDE_quick3d= 1
_KDE_quickcontrols= 0
_KDE_quickcontrols2= 7
_KDE_quicktimeline= 0
_KDE_remoteobjects= 0
_KDE_script= 0
_KDE_script_ORIGIN_TAG= v5.15.11-lts
_KDE_script_VERSION= 5.15.11
_KDE_scxml= 0
_KDE_sensors= 0
_KDE_serialbus= 0
_KDE_serialport= 0
_KDE_speech= 1
_KDE_svg= 8
_KDE_tools= 1
_KDE_translations= 0
_KDE_virtualkeyboard= 0
_KDE_wayland= 57
_KDE_webchannel= 3
_KDE_webglplugin= 0
_KDE_websockets= 2
_KDE_webview= 0
_KDE_x11extras= 0
_KDE_xmlpatterns= 0
. if defined(_KDE_${_QT_DIST})
QT5_KDE_PATCH= p${_KDE_${_QT_DIST}}
_KDE_${_QT_DIST}_VERSION?= ${_QT_VERSION}
_KDE_${_QT_DIST}_ORIGIN_TAG?= v${_KDE_${_QT_DIST}_VERSION}-lts-lgpl
COMMENT+= (KDE patched)
. else
QT5_KDE_PATCH= #
. endif
. endif # ${_QT_VER:M5}
# Environment setup for Qt5
. if ${_QT_VER:M5}
# Qt (at least when used with qmake) has a tendency to overlink: some libraries
# have dependencies on others in the mkspec configurations and the latter are
# always passed to the linker even if they are not actually used. By passing
# --as-needed to the linker by default when building the Qt ports we do not
# have to declare a lot of unnecessary dependencies in USE_QT5.
LDFLAGS+= -Wl,--as-needed
. if ${_QT_DIST} == "base" && ${PORTNAME} != "qmake"
# Qt configure requires pkg-config to detect dependencies.
.include "${USESDIR}/pkgconfig.mk"
. endif
# -nomake is only used by qtbase's configure script.
# Other ports from other Qt modules will automatically build examples and
# tests if the directories exist because of mkspecs/features/qt_parts.prf.
EXTRACT_AFTER_ARGS?= ${DISTNAME:S,$,/examples,:S,^,--exclude ,} \
${DISTNAME:S,$,/tests,:S,^,--exclude ,} \
--no-same-owner --no-same-permissions
. endif # ! ${_QT_VER:M5}
# Build setup for Qt6
. if ${_QT_VER:M6}
CMAKE_ARGS+= -DCMAKE_INSTALL_PREFIX=${PREFIX} \
-DINSTALL_BINDIR=${PREFIX}/${QT_BINDIR_REL} \
-DINSTALL_PUBLICBINDIR=${PREFIX}/bin \
-DINSTALL_LIBDIR=${PREFIX}/${QT_LIBDIR_REL} \
-DINSTALL_LIBEXECDIR=${PREFIX}/${QT_LIBEXECDIR_REL} \
-DINSTALL_DOCDIR=${PREFIX}/${QT_DOCDIR_REL} \
-DINSTALL_ARCHDATADIR=${PREFIX}/${QT_ARCHDIR_REL} \
-DINSTALL_DATADIR=${PREFIX}/${QT_DATADIR_REL} \
-DINSTALL_INCLUDEDIR=${PREFIX}/${QT_INCDIR_REL} \
-DINSTALL_MKSPECSDIR=${PREFIX}/${QT_MKSPECDIR_REL} \
-DINSTALL_EXAMPLESDIR=${PREFIX}/${QT_EXAMPLEDIR_REL} \
-DINSTALL_DESCRIPTIONSDIR=${PREFIX}/${QT_DESCRIPTIONSDIR_REL} \
-DQT_QMAKE_TARGET_MKSPEC:String=freebsd-clang \
--log-level=TRACE
. endif
# Build setup for Qt5
. if ${_QT_VER:M5}
CONFIGURE_ENV+= MAKE="${MAKE:T}"
CONFIGURE_ARGS+= -opensource -confirm-license \
-no-pch \
-prefix ${PREFIX} \
-bindir ${PREFIX}/${QT_BINDIR_REL} \
-headerdir ${PREFIX}/${QT_INCDIR_REL} \
-libdir ${PREFIX}/${QT_LIBDIR_REL} \
-plugindir ${PREFIX}/${QT_PLUGINDIR_REL} \
-importdir ${PREFIX}/${QT_IMPORTDIR_REL} \
-datadir ${PREFIX}/${QT_DATADIR_REL} \
-docdir ${PREFIX}/${QT_DOCDIR_REL} \
-translationdir ${PREFIX}/${QT_L10NDIR_REL} \
-sysconfdir ${PREFIX}/${QT_ETCDIR_REL} \
-nomake examples -nomake tests \
-platform ${QMAKESPECNAME} \
-archdatadir ${PREFIX}/${QT_ARCHDIR_REL} \
-libexecdir ${PREFIX}/${QT_LIBEXECDIR_REL} \
-qmldir ${PREFIX}/${QT_QMLDIR_REL} \
-examplesdir ${PREFIX}/${QT_EXAMPLEDIR_REL} \
-testsdir ${PREFIX}/${QT_TESTDIR_REL}
. if ${ARCH} == i386 && empty(MACHINE_CPU:Msse2)
CONFIGURE_ARGS+= -no-sse2
. endif
# Work around a bug in current binutils, where the gold linker creates
# duplicate symbols. See pr 218187. Disable the gold-linker for Qt5 ports.
CONFIGURE_ARGS+= -no-use-gold-linker
# Pass -recheck-all so that multiple calls to the configure script really
# re-run all checks.
CONFIGURE_ARGS+= -recheck-all
. endif # ${_QT_VER:M5}
. if defined(WANT_QT_DEBUG) || defined(WITH_DEBUG)
WITH_DEBUG= yes
STRIP= # It's done prior to bsd.qt.mk inclusion.
CONFIGURE_ARGS+= -debug -separate-debug-info
# Override configuration in global qconfig.pri.
QMAKE_ARGS+= QT_CONFIG+="debug separate_debug_info" \
QT_CONFIG-="release"
. else
CONFIGURE_ARGS+= -release -no-separate-debug-info
QMAKE_ARGS+= QT_CONFIG+="release" \
QT_CONFIG-="debug separate_debug_info"
. endif # defined(WANT_QT_DEBUG) || defined(WITH_DEBUG)
. if defined(WANT_QT_VERBOSE_CONFIGURE)
CONFIGURE_ARGS+= -verbose
. endif
. if ${_QT_DIST} == "base"
_EXTRA_PATCHES_QT5= ${PORTSDIR}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_features_create__cmake.prf \
${PORTSDIR}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_features_qt__module.prf \
${PORTSDIR}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_common_bsd_bsd.conf \
${PORTSDIR}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_freebsd-clang_qmake.conf
. if ${ARCH:Mmips*} || (${ARCH:Mpowerpc*} && !exists(/usr/bin/clang)) || ${ARCH} == sparc64
_EXTRA_PATCHES_QT5+= ${PORTSDIR}/devel/${_QT_RELNAME}/files/extra-patch-mkspecs_common_g++-base.conf \
${PORTSDIR}/devel/${_QT_RELNAME}/files/extra-patch-mkspecs_common_gcc-base.conf \
${PORTSDIR}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_freebsd-g++_qmake.conf
USE_GCC= yes
. elif ${ARCH} == armv7 || ${ARCH} == powerpc
_EXTRA_PATCHES_QT5+= ${PORTSDIR}/devel/${_QT_RELNAME}/files/extra-patch-mkspecs_common_g++-base.conf \
${PORTSDIR}/devel/${_QT_RELNAME}/files/extra-patch-mkspecs_common_gcc-base.conf \
${PORTSDIR}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_freebsd-g++_qmake.conf
. endif
. if ${_QT_VER:M5}
EXTRA_PATCHES?= ${PORTSDIR}/devel/${_QT_RELNAME}/files/extrapatch-configure \
${PORTSDIR}/devel/${_QT_RELNAME}/files/extrapatch-sync.profiles \
${_EXTRA_PATCHES_QT5}
. endif # ${_QT_VER:M5}
. endif # ${_QT_DIST} == "base"
# Override settings installed in qconfig.h and *.pri files. The flags will be
# installed along with the port, but have to be passed as arguments while
# building the port itself. Flags prefixed with "-" (e.g., "-CUPS" and "-cups")
# are needed to disable some features.
. if !defined(${QT_MODNAME}) || empty(${QT_MODNAME})
# Used for both qconfig-*.h and qt_config_*.pri; it can't be empty.
QT_MODNAME= ${PORTNAME}
. endif
QT_DEFINES?= # For qconfig.h flags (without "QT_" prefix).
QT_CONFIG?= # For *.pri files QT_CONFIG flags.
. if ${QT_DEFINES}
QMAKE_ARGS+= DEFINES+="${QT_DEFINES:O:u:C/^([^-])/QT_\1/:C/^-/QT_NO_/:O}"
. endif # ${QT_DEFINES}
PKGDEINSTALL= ${WRKDIR}/pkg-deinstall
PKGINSTALL= ${WRKDIR}/pkg-install
. if ${QT_CONFIG:N-*}
QMAKE_ARGS+= QT_CONFIG+="${QT_CONFIG:N-*:O:u}"
. endif
. if ${QT_CONFIG:M-*}
QMAKE_ARGS+= QT_CONFIG-="${QT_CONFIG:M-*:O:u:C/^-//}"
. endif
PLIST_SUB+= SHORTVER=${_QT_VERSION:R} \
FULLVER=${_QT_VERSION:C/-.*//}
# Handle additional PLIST directories, which should only be used for Qt-dist ports.
. for dir in ETC
# Export QT_ETCDIR.
PLIST_SUB+= QT_${dir}DIR="${QT_${dir}DIR_REL}"
. endfor
. if ${_QT_VER:M5}
. for dir in CMAKE
# Export QT_CMAKEDIR.
PLIST_SUB+= QT_${dir}DIR="${QT_${dir}DIR_REL}"
. endfor
. endif
. if ${_QT_VER:M5}
. if ${_QT_DIST} == "base"
# qtbase requires some tools to be symlinked to the build directory.
_QT_TOOLS= # empty
. if ${PORTNAME} != "qmake"
_QT_TOOLS+= ${QMAKE}
. endif
. if ${PORTNAME} != "buildtools"
_QT_TOOLS+= ${MOC} ${RCC}
. endif
. if ${PORTNAME} != "qdoc"
_QT_TOOLS+= qdoc
. endif
. if ${PORTNAME} != "dbus"
_QT_TOOLS+= qdbuscpp2xml qdbusxml2cpp
. endif
. if ${PORTNAME} != "widgets"
_QT_TOOLS+= ${UIC}
. endif
# The list of QtBase components that need to be linked into WRKSRC/lib for
# other QtBase ports. See below.
_QT5_BASE= core dbus gui network sql widgets
_QT5_ADDITIONAL_LINK?= # Ensure definition
. if ${_QT_VER:M5}
post-patch: gcc-post-patch
gcc-post-patch:
${REINPLACE_CMD} 's|%%LOCALBASE%%|${LOCALBASE}|g' \
${WRKSRC}/mkspecs/common/gcc-base.conf \
${WRKSRC}/mkspecs/freebsd-g++/qmake.conf
${REINPLACE_CMD} 's|%%GCC_DEFAULT%%|${GCC_DEFAULT}|g' \
${WRKSRC}/mkspecs/common/gcc-base.conf \
${WRKSRC}/mkspecs/common/g++-base.conf \
${WRKSRC}/mkspecs/common/bsd/bsd.conf \
${WRKSRC}/mkspecs/freebsd-g++/qmake.conf
. endif
pre-configure: qtbase-pre-configure
qtbase-pre-configure:
. for tool in ${_QT_TOOLS}
@${TEST} -e ${QT_BINDIR}/${tool:T} && \
${LN} -sf ${QT_BINDIR}/${tool:T} ${CONFIGURE_WRKSRC}/bin/${tool:T} || \
${TRUE}
. endfor
# The following is a fix for the inplace upgrade problem we faced (see
# QTBUG-40825 and ports bugs 194088, 195105 and 198720) previously,
# which previously was adressed by making sure, that ${LOCALBASE}/lib, which
# would often gets added by pkgconf for the dependencies, was passed after
# ${WRKSRC}/lib.
# * We fix the inplace upgrade problem by moving the Qt5 libraries into
# ${LOCALBASE}/lib/qt5. Therefore a -L${LOCALBASE}/lib does no harm anymore.
# * However, this means, that the ports belonging to the split up QtBase package
# now no longer can find their depending QtBase libraries. We fix this by
# linking these into ${CONFIGURE_WRKSRC}/lib if the given QtBase port depends
# on them.
. if ${_QT_DIST:Mbase}
. for basedep in ${_QT5_BASE}
. if ! empty(USE_QT:M${basedep})
${LN} -sf ${QT_LIBDIR}/${${basedep}_LIB} ${CONFIGURE_WRKSRC}/lib
. endif
. endfor
. endif
#
# **** THIS PART IS OBSOLETE FOR THE NEXT QT UPGRADE ****
#
# Add ${LOCALBASE}/lib to DEFAULT_LIBDIRS, which we use to filter out
# certain paths from pkg-config calls (see the explanation in
# devel/qt5/files/patch-configure) as well as for setting
# QMAKE_DEFAULT_LIBDIR in mkspecs/qconfig.pri. Part of the solution for
# ports/194088.
post-patch: qtbase-post-patch
qtbase-post-patch:
${REINPLACE_CMD} -e 's|%%LOCALBASE%%|${LOCALBASE}|g' \
${WRKSRC}/mkspecs/common/bsd/bsd.conf \
${WRKSRC}/mkspecs/freebsd-clang/qmake.conf
. if ${PORTNAME} != "qmake"
_QMAKE= ${CONFIGURE_WRKSRC}/bin/qmake
. endif
. endif
pre-configure: qt5-pre-configure
qt5-pre-configure:
# Qt 5.3.2 introduced a check in mkspecs/features/create_cmake.prf that
# requires tests/auto/cmake to be present, otherwise the configure stage will
# fail.
# Since we cannot extract tests/auto/cmake/ and exclude tests/ at the same
# time, we have to disable the check in a cache file (the only way to get this
# value through to the configure script in qtbase).
${MKDIR} ${CONFIGURE_WRKSRC}
${ECHO_CMD} 'CMAKE_MODULE_TESTS = -' > ${CONFIGURE_WRKSRC}/.qmake.cache
# configure will run syncqt.pl if it finds a .git entry in the working directory
touch ${WRKSRC}/.git
# As the patch collection was created after a version bump, all module verisions
# are tagged as 5.15.3
touch ${WRKSRC}/.qmake.conf # easier than to -f before the sed
${REINPLACE_CMD} -e '/MODULE_VERSION/s|5\.15\.[0-9]|${_QT_VERSION}|g' \
${WRKSRC}/.qmake.conf
# **** THIS PART IS OBSOLETE FOR THE NEXT QT UPGRADE ****
#
# We piggyback on QMAKE_LIBDIR_FLAGS to make sure -L${WRKSRC}/lib is passed to
# the linker before -L/usr/local/lib. By default, the opposite happens, which
# is a problem when a Qt port is being upgraded, since an existing library
# would end up being picked up instead of those built in ${WRKSRC}/lib. Since
# qmake appends the value of QMAKE_LIBDIR to QMAKE_LIBDIR_FLAGS, we can use the
# latter to get the linker path order right. qmake is smart enough to strip
# occurrences of ${WRKSRC}/lib from .pc and .prl files when installing them.
# See QTBUG-40825 and ports bugs 194088, 195105 and 198720.
${ECHO_CMD} 'QMAKE_LIBDIR_FLAGS = -L${CONFIGURE_WRKSRC}/lib' >> ${CONFIGURE_WRKSRC}/.qmake.cache
${ECHO_CMD} 'QMAKE_DEFAULT_LIBDIRS += ${LOCALBASE}/lib /usr/lib /lib' >> ${CONFIGURE_WRKSRC}/.qmake.cache
${ECHO_CMD} 'QMAKE_DEFAULT_INCDIRS += ${LOCALBASE}/include /usr/include' >> ${CONFIGURE_WRKSRC}/.qmake.cache
# Allow linking of further libraries to the configure directory.
. if !empty(_QT5_ADDITIONAL_LINK)
. for dep in ${_QT5_ADDITIONAL_LINK}
${MKDIR} ${CONFIGURE_WRKSRC}/lib
. if ! empty(USE_QT:M${dep})
${LN} -sf ${QT_LIBDIR}/${qt-${dep}_LIB} ${CONFIGURE_WRKSRC}/lib
. endif
. endfor
. endif
. if ${QT_DEFINES:N-*}
# There **are** defines, so we need to **add** this port to the
# qconfig-modules.h header; make @need_add empty and comment out
# the @need_remove lines in the script (see below in qt-post-install).
# If there are no defines, do it the other way around.
_sub_need_add=
_sub_need_remove= \#\#
. else
_sub_need_add= \#\#
_sub_need_remove=
. endif
# If a port installs Qt version-specific binaries (e.g. "designer" which
# existed as a Qt4 application and exists as a Qt5 application and will
# probably be a Qt6 application) the port should set `QT_BINARIES=yes`.
. if defined(QT_BINARIES)
_sub_need_bin=
. else
_sub_need_bin= \#\#
. endif
. if ${QT_MODNAME} == core
# QtCore (e.g. devel/qt5-core) is the one that starts the header,
# and is also the one that can clean it up when deinstalled.
_sub_need_clean=
. else
_sub_need_clean= \#\#
. endif
post-install: qt-post-install
qt-post-install:
# We can't use SUB_FILES with the shared pkg-change.in.
# We need it to be a script instead of a group of @unexecs.
# Do two steps of processing -- introducing the Qt variables,
# and replacing the @tags with comment (or nothing) characters
# according to the port's settings -- in one sed and write
# to pkg-change.tmp. Then split it up and minify for the
# install and deinstall step.
@${SED} -e 's,%%QT_MODNAME%%,${QT_MODNAME},g' \
-e 's,%%QT_INCDIR%%,${QT_INCDIR},g' \
-e 's,@need_add,${_sub_need_add},' \
-e 's,@need_remove,${_sub_need_remove},' \
-e 's,@need_clean,${_sub_need_clean},' \
-e 's,@need_bin,${_sub_need_bin},' \
${PORTSDIR}/devel/${_QT_RELNAME}/${FILESDIR:T}/pkg-change.in > \
${WRKDIR}/pkg-change.tmp
@${SED} -e 's,@install,,' -e 's,@deinstall,##,' ${WRKDIR}/pkg-change.tmp | ${SED} -e '/##/d' > ${PKGINSTALL}
@${SED} -e 's,@install,##,' -e 's,@deinstall,,' ${WRKDIR}/pkg-change.tmp | ${SED} -e '/##/d' > ${PKGDEINSTALL}
# Drop all leading spaces in the script, to minify
@${REINPLACE_CMD} 's/^ *//' ${PKGINSTALL} ${PKGDEINSTALL}
. if ${QT_DEFINES:N-*}
@${MKDIR} ${STAGEDIR}${QT_INCDIR}/QtCore/modules
@${ECHO_CMD} -n \
> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h
. for def in ${QT_DEFINES:N-*:O:u:C/=.*$//}
@${ECHO_CMD} "#if !defined(QT_${def}) && !defined(QT_NO_${def})" \
>> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h
${ECHO_CMD} "# define QT_${def}" \
>> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h
@${ECHO_CMD} "#endif" \
>> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h
@${ECHO_CMD} \
>> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h
. endfor
@${ECHO_CMD} "${PREFIX}/${QT_INCDIR_REL}/QtCore/modules/qconfig-${QT_MODNAME}.h" \
>> ${TMPPLIST}
. endif # ${QT_DEFINES:N-*}
. if ${QT_CONFIG:N-*}
@${MKDIR} ${STAGEDIR}${QT_MKSPECDIR}/modules
${ECHO_CMD} "QT_CONFIG += ${QT_CONFIG:N-*:O:u}" \
> ${STAGEDIR}${QT_MKSPECDIR}/modules/qt_config_${QT_MODNAME}.pri
@${ECHO_CMD} "${PREFIX}/${QT_MKSPECDIR_REL}/modules/qt_config_${QT_MODNAME}.pri" \
>> ${TMPPLIST}
. endif # ${QT_CONFIG:N-*}
. endif # M5
. if ${_QT_VER:M6}
post-stage: qt6-post-stage
# Clean-up of empty directories, as we install
# * cmake to ${LOCALBASE}/lib/cmake not ${QT_LIBDIR}/cmake.
# * pkgconfig to ${LOCALBASE}/libexec/pkgconfig not ${QT_LIBDIR}/pkgconfig
qt6-post-stage:
${RM} -r ${STAGEDIR}${QT_LIBDIR}/cmake
${RM} -r ${STAGEDIR}${QT_LIBDIR}/pkgconfig
. endif
qt-create-kde-distfile:
${MKDIR} ${DISTDIR}/${DIST_SUBDIR}
${SH} ${PORTSDIR}/devel/${_QT_RELNAME}/files/create_kde-qt_release.sh \
${_QT_DIST} \
${DISTDIR}/${DIST_SUBDIR} \
${_KDE_${_QT_DIST}_VERSION} \
${_KDE_${_QT_DIST}_ORIGIN_TAG}
.endif # defined(_QT_DIST_MK_INCLUDED)
Reference in New Issue View Git Blame Copy Permalink