freebsd-ports/mail/exim-devel/Makefile

# New ports collection makefile for:	exim
# Date created:		23 June 1996
# Whom:			markm@FreeBSD.org
#
# $FreeBSD$
#

PORTNAME=	exim
PORTVERSION=	3.33
PORTREVISION=	1
CATEGORIES=	mail
MASTER_SITES=	ftp://ftp.csx.cam.ac.uk/pub/software/email/exim/ \
		http://www.exim.org/ftp/ \
		ftp://ftp.is.co.za/networking/mail/transport/exim/
DISTFILES=	exim-3.33.tar.bz2 exim-texinfo-3.30.tar.bz2

MAINTAINER=	sheldonh@FreeBSD.org

USE_BZIP2=	yes

.if defined(NOPORTDOCS)
PKGMESSAGE=	${FILESDIR}/POST-INSTALL-NOTES
.endif

MAKE_ENV+=	OSTYPE=${OPSYS} ARCHTYPE=${MACHINE_ARCH}

# If WITH_EXIMON is defined, the eximon monitor, which requires X,
# will be made a dependency.  Note that using WITH_EXIMON will cause
# XFree86 to be installed if it is not present.
#WITH_EXIMON=	yes

# Define WITH_TCP_WRAPPERS, WITH_LDAP, WITH_MYSQL, and WITH_PGSQL to
# link against libwrap, an LDAP library (see below), liblibmysqlclient
# and libpq respectively.
#WITH_TCP_WRAPPERS=	yes
#WITH_LDAP=		yes
#WITH_MYSQL=		yes
#WITH_PGSQL=		yes

# Define WITHOUT_IPV6 to exclude IPv6 support from the compiled exim
# binary.  Exim compiled with IPv6 support will still operate on
# systems that do not have IPv6 kernel support, so this should not
# be necessary.
#WITHOUT_IPV6=		yes

# If WITH_LDAP is defined, LDAP_LIB_TYPE must be either OPENLDAP1 or
# OPENLDAP2.  UMICHIGAN is an alias for OPENLDAP1.  Exim also supports
# NETSCAPE and SOLARIS7 lookup types, but no client libraries exist
# for these in the ports tree.
LDAP_LIB_TYPE?=OPENLDAP1

# The following options may be defined to turn off support for various
# features that this port enables by default.
#
# Do not link against OpenSSL; disables STARTTLS.
#WITHOUT_TLS=	yes
#
# Disable the embedded Perl interpreter, which allows Perl subroutines to
# be called during string expansion.
#WITHOUT_PERL=	yes
#
# Disable built-in Exim support for the PAM, RFC 2195 and RFC 2595
# authentication mechanisms, used for SMTP AUTH.
#WITHOUT_PAM=			yes
#WITHOUT_AUTH_CRAM_MD5=		yes
#WITHOUT_AUTH_PLAINTEXT=	yes
#
# Disable built-in Exim support for additional mailbox formats.
#WITHOUT_MAILDIR=	yes
#WITHOUT_MAILSTORE=	yes
#WITHOUT_MBX=		yes
#
# Disable support for CDB-style lookups.
#WITHOUT_CDB=		yes

# You should not need to fiddle with anything below this point.

.if defined(WITH_EXIMON)
RUN_DEPENDS=	${LOCALBASE}/sbin/eximon:${PORTSDIR}/mail/exim-monitor
.endif

.include <bsd.port.pre.mk>

.if ${OSVERSION} < 400014
WITHOUT_IPV6=	yes
.endif

SEDLIST=	-e 's,XX_PREFIX_XX,${PREFIX},'

.if !defined(WITHOUT_TLS)
SEDLIST+=	-e 's,^\# SUPPORT_TLS=,SUPPORT_TLS=,'
.else
SEDLIST+=	-e 's,^TLS_LIBS=,\#TLS_LIBS=,'
.endif

.if !defined(WITHOUT_PERL)
SEDLIST+=	-e 's,^\# EXIM_PERL=,EXIM_PERL=,'
.endif

.if defined(WITH_TCP_WRAPPERS)
SEDLIST+=	-e 's,XX_TCP_WRAPPERS_LIBS_XX,-lwrap,' \
		-e 's,^\# USE_TCP_WRAPPERS=,USE_TCP_WRAPPERS=,'
.else
SEDLIST+=	-e 's,XX_TCP_WRAPPERS_LIBS_XX,,'
.endif

.if defined(WITH_LDAP)
.if (${LDAP_LIB_TYPE} == OPENLDAP1) || (${LDAP_LIB_TYPE} == UMICHIGAN)
LIB_DEPENDS+=	lber.1:${PORTSDIR}/net/openldap
.elif ${LDAP_LIB_TYPE} == OPENLDAP2
LIB_DEPENDS+=	lber.2:${PORTSDIR}/net/openldap2
.else
.error LDAP_LIB_TYPE must be either OPENLDAP1 or OPENLDAP2
.endif
SEDLIST+=	-e 's,XX_LDAP_LIBS_XX,-L${LOCALBASE}/lib -llber -lldap,' \
		-e 's,XX_LDAP_INCLUDE_XX,-I${LOCALBASE}/include,' \
		-e 's,XX_LDAP_TYPE_XX,${LDAP_LIB_TYPE},' \
		-e 's,^\# LOOKUP_LDAP=,LOOKUP_LDAP=,'
.else
SEDLIST+=	-e 's,XX_LDAP_[^ ]*_XX,,' \
		-e 's,^LDAP_LIB_TYPE=,\#LDAP_LIB_TYPE=,'
.endif

.if defined(WITH_MYSQL)
LIB_DEPENDS+=	mysqlclient.10:${PORTSDIR}/databases/mysql323-client
SEDLIST+=	-e 's,XX_MYSQL_LIBS_XX,-L${LOCALBASE}/lib/mysql -lmysqlclient,' \
		-e 's,XX_MYSQL_INCLUDE_XX,-I${LOCALBASE}/include/mysql,' \
		-e 's,^\# LOOKUP_MYSQL=,LOOKUP_MYSQL=,'
.else
SEDLIST+=	-e 's,XX_MYSQL_[^ ]*_XX,,'
.endif

.if !defined(WITHOUT_PAM)
SEDLIST+=	-e 's,XX_PAM_LIBS_XX,-lpam,' \
		-e 's,^\# SUPPORT_PAM=,SUPPORT_PAM=,'
.else
SEDLIST+=	-e 's,XX_PAM_LIBS_XX,,'
.endif

.if !defined(WITHOUT_AUTH_CRAM_MD5)
SEDLIST+=	-e 's,^\# AUTH_CRAM_MD5=,AUTH_CRAM_MD5=,'
.endif

.if !defined(WITHOUT_AUTH_PLAINTEXT)
SEDLIST+=	-e 's,^\# AUTH_PLAINTEXT=,AUTH_PLAINTEXT=,'
.endif

.if defined(WITH_PGSQL)
LIB_DEPENDS+=	pq.2:${PORTSDIR}/databases/postgresql7
SEDLIST+=	-e 's,XX_PGSQL_LIBS_XX,-L${LOCALBASE}/lib -lpq,' \
		-e 's,XX_PGSQL_INCLUDE_XX,-I${LOCALBASE}/include/pgsql,' \
		-e 's,^\# LOOKUP_PGSQL=,LOOKUP_PGSQL=,'
.else
SEDLIST+=	-e 's,XX_PGSQL_[^ ]*_XX,,'
.endif

.if !defined(WITHOUT_IPV6)
SEDLIST+=	-e 's,^\# HAVE_IPV6=,HAVE_IPV6=,'
.endif

.if !defined(WITH_PGSQL) && !defined(WITH_MYSQL) && !defined(WITH_LDAP)
SEDLIST+=	-e 's,^LOOKUP_LIBS=,\#LOOKUP_LIBS=,' \
		-e 's,^LOOKUP_INCLUDE=,\#LOOKUP_INCLUDE=,'
.endif

.if !defined(WITHOUT_MAILDIR)
SEDLIST+=	-e 's,^\# SUPPORT_MAILDIR=,SUPPORT_MAILDIR=,'
.endif

.if !defined(WITHOUT_MAILSTORE)
SEDLIST+=	-e 's,^\# SUPPORT_MAILSTORE=,SUPPORT_MAILSTORE=,'
.endif

.if !defined(WITHOUT_MBX)
SEDLIST+=	-e 's,^\# SUPPORT_MBX=,SUPPORT_MBX=,'
.endif

.if !defined(WITHOUT_CDB)
SEDLIST+=	-e 's,^\# LOOKUP_CDB=,LOOKUP_CDB=,'
.endif

do-configure:
	${MKDIR} ${WRKSRC}/Local
	${SED} ${SEDLIST} < ${WRKSRC}/src/EDITME > ${WRKSRC}/Local/Makefile
	cd ${WRKSRC}/doc && \
	for i in ../../exim-texinfo-3.30/doc/* ; do \
		${LN} -sf $$i ; \
	done

pre-install:
	@PKG_PREFIX="${PREFIX}" ${SH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL

post-install:
.if !defined(NOPORTDOCS)
	${MKDIR} ${PREFIX}/share/doc/exim
	${INSTALL_DATA} ${FILESDIR}/POST-INSTALL-NOTES ${PREFIX}/share/doc/exim
.endif
	@${CAT} ${PKGMESSAGE}

.include <bsd.port.post.mk>