no-op script. This prevents the port from appending content to
/etc/pam.conf, which is known to break kscreensaver's password
verification, without asking first. Binary packages already left
/etc/pam.conf alone.
installation of some ".desktop" files that make packaging fail for some
users: some desktop shortcuts are not created if you don't have the
corresponding application already installed.
Users may still get the shortcuts in their local configurations by running
kappfinder as usual.
in Konqueror and such. Bump PORTREVISION. The PR below advised making
the directory too, but a little grep'ing in the source tree shows that
KDE does this for you.
PR: 26802
Submitted by: Carl True <seetru@bellsouth.net>
* All patches except sysutils/kdeadmin/files/patch-rpmMessages.c:
- Either obsoleted or merged into KDE.
* All pkg-plists:
- Huge diffs are due to mass conversion from static HTML pages
to XML/XSL versions.
* audio/kdemultimedia2:
- aRts + Noatun, etc. now work and play MP3s et al properly,
using the mpg123 aRtsplugin. Remove mpeglib[,_artsplug]
from compile.
* converters/kdesupport2:
- Obsolete. No longer used in this version of KDE.
* deskutils/kdepim:
- Use autoconf and account for brokenness in the configure
script by replacing invocations of INSTALL under libical
with the proper incantations.
- Per David O'Brien's request, move libimap to libkimap;
this was performed by Rik Hemsley <rikkus@kde.org>.
* devel/kdesdk:
- New module with some helpful tools. One in particular that
seems demanded is ``kbabel'', which, as I've been told, is
a translator's wet dream.
- Workaround dumb problem in kbabel's libgettext (which I could
not figure out how to remove) by replacing its error() with
errc(). KBabel seems to run fine with this patch.
* devel/kdevelop:
- Fix lame check for libkdeui.so.* by replacing it with just
a check for libkdeui.so. It's been/being removed from
kdevelop after 2.2.
* editors/koffice:
- Fix kivio compile errors by substituting in PTHREAD_LIBS
in the correct place. Compensate for kivio's dependency
on pthreads by changing kivio to use LD_PRELOAD=/usr/lib/libc_r.so
in kivio.desktop.
* games/kdegames2:
- Some new games.
* graphics/kdegraphics2:
- Fix link errors in libkscan and kamera where they
require gettext (ie: add -lintl).
- Fix compile error in kamera.cpp which is dependent on a
correctly done gphoto2.. of course, this will only help
people who've manually installed gphoto2 themselves.
* net/kdenetwork2:
- Mimelib was moved here (reason for removal of kdesupport2).
* misc/kdeaddons:
- New module to FreeBSD ports; some simple addons for KDE2.
Suggested by Lauri Watts <lauri@kde.org>.
* misc/kdeutils2:
- Added a couple manpages.
* x11-clocks/kdetoys2:
- Some new apps.
* sysutils/kdeadmin:
- Remove kuser from compile because it has some problems. ;\
* x11/kdelibs2:
- Add libFAM dependency to help people who run FAM; FAM
increases the overall desktop responsiveness.
Submitted by Lauri Watts <lauri@kde.org>.
- Add CUPS dependency to bring in KDE's new print system.
- Add bzip2/libxml2 dependencies to support the new help kioslave.
- Disable installation of libltdl stuff to prevent conflicts
with other stuff. Submitted by wjv.
- Add pkg-req script to avoid conflicts with kdelibs11; add
to Makefile too. Submitted by benno.
- Be sure to remove the pth header conflicts stuff from the
arts/mcop_mt section.
- Fix problem with configure trying to find -lfam in the
wrong place.
- Remove kspell and api subdirs from doc; we don't need them,
and there are problems trying to build/install them.
Submitted by Lauri Watts <lauri@kde.org>.
* x11/kdebase2:
- Solve link permissions problem by changing the modes on
files installed by kdesktop/init/Templates to 644.
Submitted by Jim Durham <durham@w2xo.pgh.pa.us>.
* x11/kde2:
- Bump version; no other changes.
Special thanks to Lauri Watts <lauri@kde.org> for helping me test
packages generated by these changes on a virgin system. I believe
that this is the best-tested update I've ever done for KDE, and it
really shines this time around.
I just noticed there are a couple other PRs in the PR db that need
to be addressed. I will take care of those by tomorrow. Sorry...
PR: 22735, 28549
Blanket approval by: demon (kdesdk, kdevelop)
bin/kmorph3d.kss
bin/kpipes.kss
bin/kspace.kss
to at least make this package. We need this package for the
release candidate.
Submitted by: bento via steve
- bsd.port.mk update to use bsd.kde.mk for USE_{QT,KDE}*
- Cleanup corresponding ports for bsd.kde.mk update.
- Fix bsd.kde.mk: use correct kdelibs dependency, put qt at the bottom,
introduce QT_NONSTANDARD variable for nonstandard configure setup.
- Update KDE2 to 2.1.1. Two patches included in x11/kdelibs2 to fix the
proxy authentication that was broken for 2.1.1. Remove old patches.
- Potentially fix kdelibs build for alpha.
- Fix qt-designer 2.3.0 build.
- Ruby stuff left alone since it looks like black magic to me. Should
still work w/ compat shims for older USE_QT[,2] style. Some others
were also left alone for the same reason.
Reviewed by: portmgr, ports (bsd.kde.mk+bsd.port.mk)
Submitted by: David Faure <faure@kde.org> (proxy auth patches)
Alex Zepeda <garbanzo@kde.org> (old patches removal)
this involves is this: Cull GL from Qt by default, but still provide a
Qt+GL library that may or may not have threads. Then also provide a Qt
library that has threads but not GL. This allows us to make KDE2 depend
on a library that will *not* have threads, ever. Threads will be
revisited at a later date. Ports that require GL support need to be
updated to use the hacked library, libqtgl.so.4. The net result is that
we bloat our qt2 package by 1.5-2.5MB for compatability. Also, static
qt will not have GL support.
Introduce bsd.kde.mk, which will be tested on bento before becoming
fully activated.
Replace qt22-static with qt2-static, since it's just a proxy. Update
qt-designer to depend on qt23. Also make the old hack to package the
correct lib obsolete by using PLIST_SUB instead.
Miscellaneous changes: remove LIBQTFILE from CONFIGURE_ENV, it's not
used anymore. Solve namespace pollution problems with the devel/pth and
devel/libgnugetopt ports. Hopefully.
Suggested by: ade, asami, sobomax (bsd.kde.mk)
Repocopied by: asami (qt22-static --> qt2-static)
work right yet. This needs other eyes to look at in order for me to figure
out what's going on here. Help, please?
Basically, the current situation is this: You can hack the startkde
script to make KDE2 start all the way through, which basically consists of
simply replacing the kdeinit line with "kcminit". However, at certain
points after KDE is done setting things up, processes named "kdeinit" that
are in charge of certain apps go crazy and hit infinite loops somewhere. I
haven't been able to determine where exactly, and if this is related to
threads at all, or if a critical app or similar somehow doesn't get compiled
with threads. Or something like that. *sigh*
Konqueror can startup and seems to work okay in a different window manager,
but it seems to randomly set off a kdeinit proc as above.
Anyhow, this is 2 weeks' worth of debugging on a 4-month-old problem. If
you're using XFree86 4.0.2, I caution against trying this stuff out unless
you're going to help me out and are willing to help me figure out exactly
where the heck things are going awry. Things should still compile and work
just fine for those on XFree86 3.3.6. I decided to leave out these hacks
in nonessential stuff (like kdenetwork et al) because kde2 itself needs to
work with threads first. =)
I guess I can thank my lucky stars JKH's decided to stick with 3.3.6 until
some point in the future when 4.0.x becomes more stable...
of <sys/time.h> (for $DEITY knows why reason); fix kinfo_proc meddling in
ProcessList.c.
Reported by: MANY (ldap problem), mi, msmith (kinfo_proc)
Submitted by: Sven Petai <hadara@online.ee> (partial patch for kinfo_proc,
I added __FreeBSD_version #ifdefs and cleaned it up a bit)
the KDE team's excellent work, I am initiating burn sequence for KDE
1.x. All base KDE1 ports are hereby nuked. I am also reluctantly
reassuming maintainership of the KDE2 ports. Official KDE 2.1 packages
built for FreeBSD 4.2-STABLE w/ XFree86 4.0.2 are available on KDE's
official ftp mirrors now. Enjoy!
Note: It seems that the KDE people rerolled their kdelibs and kdebase
packages, and a quick examination of diffs reveal minor changes, but the
port should still work. I'll fix the packaging problems that bento runs
into.
Approved by: kevlo
to the final release of KDE 2.0. Kevin Lo <kevlo@FreeBSD.org> will continue
as the new maintainer. He has commit privileges on the KDE tree, making him
an excellent candidate for this job. I'll be behind the scenes for awhile,
since there are some structural changes I'd like to make but I'd rather have
Kevin do the work. Please, people, direct your patches at Kevin and watch
his "freetime deprivation process" _really_ start. :-P
have not tried KDE 2.0 or haven't done so in awhile (i.e. since July or
before), you should try this. This version is extremely stable and offers
better functionality than before. This update also introduces the KDE2
modules kdegraphics and kdemultimedia to our ports tree. Additionally,
this marks the first time FreeBSD packages were announced as part of the
KDE2 beta release announcement! :-)
Most (if not all) of the remaining modules in KDE2 will be added for the
update WRT the final release.
A hack was added to fix building with SSL in kdelibs; this has been merged
in the main tree and will go away with 2.0 release update. Thanks to David
Faure <david@mandrakesoft.com> for his help regarding this.
Also, building the docs should now succeed because I've added a build
dependency on jade and linuxdoc (should be enough).
People can get my precompiled packages from the usual location on the KDE
FTP server (should spread to the mirrors Real Soon Now (tm)):
http://ftp.kde.org/pub/kde/unstable/distribution/2.0Beta5/tar/FreeBSD/
Have fun! Remember to reports bugs through http://bugs.kde.org/.
I can address some of its issues (should see it marked un-broken in about
3 hours, if they're trivial enough). It took too long to get this update
out the door... :-(
This is a rather stable version of KDE2. Release is hoped for sometime
next month, so I'm going to try to reroll snapshots this weekend.
Also decide policy by removing the interactive requirement in qt22's
configure script. I don't know why they bothered adding it there..
Bugged by: *many* bug-reports, requests, etc.
XFree86 (3 or 4) to depend to when USE_XLIB is set.
XFREE86_VERSION defaults to 3 for now, but adventurous users can
override it in /etc/make.conf. When XFREE86_VERSION=3, USE_XLIB
will add a dependency to x11/XFree86; when it is set to 4, the
dependency will be to x11/XFree86-4-libraries. When
XFREE86_VERSION=4, the PKG_IGNORE_DEPENDS and ALWAYS_BUILD_DEPENDS
hacks to avoid messing with XFree86 are turned off.
Since XFree86 version 4 includes some software that used to be
separate ports, when XFREE86_VERSION=3 the following variables are
provided:
USE_DGS LIB_DEPENDS on x11/dgs
USE_FREETYPE LIB_DEPENDS on print/freetype
USE_MESA LIB_DEPENDS on graphics/Mesa3
USE_XPM LIB_DEPENDS on graphics/xpm
When XFREE86_VERSION=4, these variables have no effect. The
LIB_DEPENDS in the tree for the above four ports have all been
converted to the USE_* counterparts. For your information, this
is the count of the number of ports:
USE_DGS 0
USE_FREETYPE 16
USE_MESA 36
USE_XPM 236
There is a new variable, XAWVER, which is set to 6 when
XFREE86_VERSION=3 and 7 when XFREE86_VERSION=4. This is also
passed to PLIST_SUB so ports that build Xaw based shared libraries
can use this variable to substitute the shlib version number.
There is also a provision of using a separate mtree file for
XFREE86_VERSION=4, but that part is not enabled yet.
Reviewed by: the ports list
Tested by: make index (XFREE86_VERSION=3 only)
(2) Add hebrew to list of valid categories.
Submitted by: nbm
Konqueror can load HTML documents, KOffice works semi-well, and KDE2 in
general seems less buggy. Only kdeutils was left out of this mega-update.
However, it should return soon. :-)
The massive reduction in patches is mostly the result of using perl
regex replacement. This reduces the amount of time it will take in the
future to upgrade these ports, and load on the repository.
QT 2.2.0beta0 (aka qt-copy) is officially enabled for the express
purpose of allowing KDE2 to compile. It is available in the qt22 port.
Additionally, GIF support is re-enabled in both Qt2 ports, so that
people can now read GIF images. GIF support is enabled through an
internal GIF reader in Qt, and requires no patented libraries. Special
effort was made to ensure that people do not install both qt21 and qt22
ports at the same time.
I'd like to take a moment to thank the following people for their help:
Alex Zepeda <jazepeda@pacbell.net>, Stephan Kulow <coolo@kde.org>, Harri
Porten <porten@kde.org>, Waldo Bastian <waba@kde.org>, Marc G. Fournier
<scrappy@hub.org>, Arun Sharma <adsharma@sharmas.dhs.org>, Matthias
Hoelzer-Kluepfel <mhk@caldera.de>, and many others. Over 150 hours of hard
work, testing, etc. were put into this update. Another couple hundred of
hours were spent by CPUs trying to compile this behemoth. :->
Special thanks to: Physics Computer Network @ Purdue staff, especially
C. Stephen Gunn <csg@physics.purdue.edu>, for giving
me access to an extremely fast machine for doing
test builds (it performed 12 full builds of the
entire suite in the last 7 days).
PR: 18838
Submitted by: Arun Sharma <adsharma@sharmas.dhs.org>
Approved by: imura, asami
previous commit message to bsd.port.mk, which said INSTALL_SHLIBS. Boo.)
Line up the rhs of variable assignments nicely. Remove a couple of extra
whitespaces while I'm here.
Suggested by: sobomax
Only changed giflib -> libungif in kdegraphics.
They realy do NOT want libgif, and do NOT use libgif anywhere.
Some ports are checking its existence in configure, but they
are nonsense at all!!
Hope this will realy fix the problem and I add USE_XLIB.
What's the problem:
configure script checks if $PATH/X exists and if so define XBINDIR as $PATH.
In kdebase's package, XBINDIR is hardly embedded in kdm and it doesn't
work. In last modification, I added $X11BASE/bin to $PATH in Makefile...
