to CFLAGS
- this saves paper if you device to kill a job quickly because you
forgot something ...
- prevents in UPD driver (reported by Joerg) to make a "clean shutdown",
which is generally a nice idea, but in "real life" leads to a wastage
of paper ...
- portrevision bumped because of this important feature
Submitted by: J Wunsch <j@ida.interface-business.de>
or depend on the X11 libraries, if it is set.
This should allow "make release" to work happily with the documentation
build again.
Approved by: andreas (MAINTAINER)
Makefiles abuse this variable commonly used to specify default
options for the top(1) monitor, which breaks the build.
PR: 25192
Submitted by: Stefan `Sec` Zehl <sec@42.org> (among several other, whose
names were lost in entropy
of Universe)
Changes:
o PORTREVISION removed (two typos fixed in source distribution
which were fixed by patches for cups-1.1.5).
Incidentally, PORTREVISION is spelled wrong in r1.2 of the
port's Makefile.
o patch-aa and patch-ad now obsolete
o MD5 checksum
PR: 24650
Submitted by: George Reid <greid@ukug.uk.freebsd.org> MAINTAINER
to /usr/local/include/freetype/, then perlftlib cannot find freetype.h.
This problem is fixed.
Submitted by: Masayuki FUKUI <fukui@sonic.nm.fujitsu.co.jp>
jihuang@csie.nctu.edu.tw
Obtained from: direct mails
- created a new distinfo file
- bumped PORTREVISION since this makes sure, that packages are build from
proper source
Submitted by: Christopher Masto <chris@netmonger.net>
this is another showstopper after the variable name change and still
doesn't show up here, since I have the sources in DISTFILES dir...
PORTREVISION still doesn't need a bump, since no package could have
been created and if, there is no new port functionality involved with
this fix. Sorry for any trouble, but its too expensive for me, to re-fetch
all files as final test.
Submitted by: "Jamin A. Brown" <jamin@gwi.net>
I forgot to change HPDJ_DRV to HPDJ_SRC in DISTFILES
PORTREVISION not bumped since building of packages wasn't possible.
Even if port/package could be build, because hpdj source was already
present, no functionality change.
Submitted by: "Justin W. Pauler" <jwpauler@jwpages.com>, "Jamin A. Brown" <jamin@gwi.net>
high quality drivers for Epsons, HPs, ...
- bumped port revision
- modified all target and added a makefile component to build
tool from stp driver (escputil) to do maintenance on epsons
install manpage as well
- variable name changes, new scheme sounds better
- use variables as often as possible in all make targets
to reduce port maintenance as much as possible
- fix two copy and paste mistakes in echo messages
- updated pkg_plist, tested port and package building
as well as removal
- modified configure.batch to build stp driver
- removed port revision, because of new version
- added PCL3 driver (hpdj successor) from Martin Lottermoser
*both* driver, HPDJ and PCL3, are now compiled in
reason: PCL3 is still flagged as BETA and author didn't get much response
Although Martin says, its definitively not ALPHA, its safer to have the
old drivers around, if things fail for some reason.
Martin confirmed, that its possible to have both in one gs binary !!!
- disable configure script temporarily, since dialog needs a driver update
but I don't want to hold back that port any longer.
- enabled as many gs driver as possible
- reorganized MASTER_SITES
- added mirrors
- add a note, that russion mirror isn't up to date, so don't add it
- optimized downloading from 6 different sources by special ordering
- reorganized Makefile completely
- put only ${GS_SOURCES} into EXTRACT_ONLY variable
unpacking other 3rd party src's is handled in post-extract target
- directory creating, patching, unpacking and install actions are
now handeled within the proper make target. This makes port maintenance
much easier, i.e.: if you enter make extract, then only extraction
of things happen, but makefiles are still not patched. Before this
cleanup, things were not so structured and not easy to maintain.
Maybe we get a configure script later, to choose between different
3rd party driver options, then this "sorting" and documenting
will support the migration process...
- silence port by hiding actions with "@"
- insert many informational echoes. This makes port maintenance and
troubleshooting easier
- put more unique comments in front of the different 3rd party modules
- document things better
- use as many environment variables as necessary, so that "numerical"
changes only have to happen on some places and not withing make targets
- use gs version number also in docu directory
- properly install runtime, info and doc files from 3rd party drivers
- put not needed stuff into "NOPORTDOCS" section
- keep old font names to avoid fetching unnecessary things
- updated patches as necessary
- added new patch from Nartin Lottermoser
- removed 2 patches that have been incorporated into gs 6.50
- added needed manual pages
- updated pkg-plist
- finally tested port and package building as well as port removal
new port passes all disciplines ;-)
Fix a typo in the configure script the prevented sample configuration
files from being install in $PREFIX/etc/cups
Bumped PORTREVISION
PR: 24227
Submitted by: George Reid <greid@ukug.uk.freebsd.org> MAINTAINER
- add patchsite and patchfile
- fix1: correct apsfilter version string that is echo'd in logfile
when script debugging is turned on
- fix2: samba remote printing bug fixed. The exported variable
containing the windows password was spelled incorrectly.
samba 2.0.7 uses PASSWD not PASSWORD.
Hint: People who don't want to reinstall apsfilter can fix that easily
by substituting PASSWORD with PASSWD
- for runtime
in $PREFIX/share/apsfilter/bin/apsfilter
- for SETUP (test printing functionality)
in $PREFIX/share/apsfilter/SETUP
${PREFIX}/include, because this lead to the freetype1's includes being picked
by the freetype2 ports.
Prompted by: mdharnois@home.com, scanner@jurai.net etc
* Makes two side output optional
* Fixes cell-*-row-margin
* Fixes sequences in tables
* Nukes the multipar macro
* Gives better table support
* Removes the trailing blank page in print output
and more.
=> bump PORTREVISION (forgotten by Roman ;-)
- Changed maintainer to ports, I want to reduce my personal workload.
Maybe I take over again in the future if I have more time for this.
PR: 24072
Submitted by: Roman Shterenzon <roman@xpert.com>
therefore they were also missing in package (-> PORTREVISION bump)
- portlint complained about descr. line being too long, trimmed it down
to below 70 chars.
PR: 23973
Submitted by: David W. Chapman Jr. <dwcjr@inethouston.net>
I must commit modification for pips800 which is a master port for these.
I forgot it.
(2) Simplify slave ports in japapese
(modifying Makefile and deleting pkg-plist).
cleanup: don't create /usr/local/apsfilter/filter/.keep_me anymore
(normal and BATCH mode)
echo some infos in install target ( if BATCH NOT set), where to look
for further help in case of trouble.
BTW, Jordan reported some bugs with noneexisting printcap file and
problems printing a test page. I removed my printcap prior installation
of printers using SETUP and had no problem so far.
The only thing that might be the case is, that apsfilters SETUP
doesn't grok the situation, if you choose a driver, that is actually
NOT compiled in into your gs binary... but this is JUST A THOUGHT.
hint: no need to update folks, sorry, make-release still doesn't work right
and updates still apsfilter-stable if I want to roll a new -current snapshot.
I will fix it in the future but currently I don't have time.
- http://www.harsch.net/Ghostscript/ghostscript.html
- driver is based on Uli Wortmann's HO DJ850 driver
- supports duplex printing
Note from the author: in duplex mode black is not so intensive as
in normal mode. Maybe HP wants to prevent, that you don't see the
black of the other side of the page too much.
If somebody knows HP's algorithm, how to reduce the black, then
author would try to compensate it with some code...
of this quite old gs5 port. Sorry forgot the name of the one who
told me to do so, but I think we all agree in not having an old
gs5 and a gs55 port all together in the ports collection.
Several notes:
o Freetype2 is incompatible at API level with older freetype, therefore
portname will be freetype2-x.x to allow pkg_* tools correctly handle
dependencies (I do not use NO_LATEST_LINK, because it is a production-quality
software, not a beta or such).
o There are no fs namespace conflicts between freetype and freetype2, so they
both could be installed on the same machine w/o any problems.
USE_MOTIF and generates a LIB_DEPENDS to x11-toolkits/open-motif. As
before, it implies USE_XPM (and therefore USE_XLIB). Motif-dummy is
removed from PKG_IGNORE_DEPENDS, whose sole resident is now XFree86-3.
Most of the simple ".if defined(HAVE_MOTIF)"s are removed to always
have USE_MOTIF. ftp/moxftp will define USE_MOTIF unless
WANT_ATHENA_VERSION (new variable) is defined. I merged the X cases
in cad/mars, so USE_MOTIF is used iff WITHOUT_X11 is not defined.
I will remove x11-toolkits/Motif-dummy (which has been repo copied to
open-motif) in a few days.
your efforts on these ports, and thank you for also taking the responsibility
to let us know your time now has other priorities.
PR: ports/22384
Submitted by: Joel Sutton, jsutton@bbcon.com.au
$PAGER overrides.
(Requested by: dcs)
One patch per modified file.
One modified file per patch.
Honor CC, CFLAGS.
Use BSD_INSTALL_FOO and, as a side effect, install with our customary
ownerships.
No response from: maintainer
PORTREVISION or PORTEPOCH are defined.
Most of these Makefiles were defining DISTNAME and WRKSRC (and
sometimes EXTRACT_SUFX) -- change those to define DISTFILES only.
Also, some of the WRKSRC lines were not even necessary, as they were
defining it to the default value.
Instigated by: Peter Pentchev <roam@orbitel.bg> and kris
version 3 of pdflib has odd restrictions for usage (and you may need to
purchase a license depending on what you do with it). It is however needed
for php4's pdf functions and is of use to many, so we'll keep a seperate
restricted port available for those of us who need it.
Support for languages other then C/C++ are turned off for now, but I may change
that (turning on perl/tcl/python support involves turning _off_ C/C++ support,
so I'll add a WITH_FOO knob later)
Submitted by: sobomax, billf
revamped port dependencies
- if defined(BATCH) && defined(APSFILTER_ALL)
every tool and filter supported by apsfilter will be installed
(very time and space consuming)
- if defined(BATCH)
only most necessary things are installed
If you want complete control over what to install, then don't
define BATCH or BATCH && APSFILTER_ALL, then please use the
new updated interactive method of building using dialog.
The configure script is now up to date, concerning tools needed/supported
by apsfilter and a little bit more explicite !
Thanks for Greg Lehey and friends for a vivit discussion, this
is the desired result I hope !!!
the PASSWORD environment variable
* custom printer queue names really work now (the given default
name is "lp" if it isn't used already)
* /etc/apsfilter/$QUEUE/apsfilterrc.$USER is another config file
* new config variable: DISABLE_DUPLEX (needed if apsfilter is not
running on the host the print job was started)
* more verbose apsfilterrc template
* some documentation updates
NIS corrections.
* statement concerning personal e-mail to me and SUPPORT in general.
* make it possible to run apsfilter in NIS environment
extraction of $HOMEDIR works now.
idea from: Volker Seebode <vas@plesnik.de>
* fixes for hpdj printers, special treatment for driver hpdj_u970
* BITSPERPIXEL can't be changed for hpdj
* due to popular demand: ASCII_PPS and ASCII_LANDSCAPE change the
printout just for ASCII files, independent of PS_NUP and LANDSCAPE
(but these provide default values if needed)
* BINDING now uses "short" and "long" instead of psset-switches
* fixed printing on PS-printers and during debugging
Sa 2 Sep 2000 18:53:41 CEST Andreas Klemm <andreas@apsfilter.org>
* replace list of apsfilter contributors with this link:
http://www.apsfilter.org/contrib.html
Sa 2 Sep 2000 12:57:15 CEST Andreas Klemm <andreas@apsfilter.org>
* added working watermark template
from Andreas Reuter <ar205@bonzo.geowiss.nat.tu-bs.de>
this file is the basis to _dynamically_ create backgrounds
for every printed page, i.e.: "internal use only", "Top Secret"
etc. Probably we'll use it this way in the future:
lpr -C wmark="Top Secret" file
Sa 2 Sep 2000 10:40:32 CEST Andreas Klemm <andreas@apsfilter.org>
* be more verbose about what A2PS_OPTS gives you
(overwrites the complete a2ps commandline)
Fr 1 Sep 2000 17:25:12 CEST Andreas Klemm <andreas@apsfilter.org>
* yes, we can remove the two entries from KNOWN_BUGS
These entries are no apsfilter bugs.
Have been added to FAQ
* FAQ has been updated on webserver.
Fr 1 Sep 2000 16:19:35 CEST Michael Lossin <losse@germanymail.com>
* custom printer queue names, as suggested by Jef Moskot
* cloning spool dir permissions with chmod (I think this needs
the GNU version)
* call checkpc after printcap fiddling (will be ignored by
BSD spoolers)
* faster code insertion for paper tray selection with awk, as
suggested by Beat Rubischon
* color mode fixed for hpdj
* small changes in class option code
* INSTALL, README and apsfilterrc updates
* remove unneeded docu .... doc/methods, doc/features,
doc/WHAT_AM_I KNOWN_BUGS
and by me:
* still keep KNOWN_BUGS have to test this ...
* update Makefile (remove nuked stuff)
* check for checkpc before using it.
* add /usr/local/sbin for checkpc
to "raw" read the input. Check if the read command
can handle "-r" and use it if possible
* fix some minor bugs with PostScript handling
Submitted by: Michael Lossin <losse@germanymail.com>
* ASCII_STYLE is gone; use PS_NUP and LANDSCAPE now (class
options: 1pps, 2pps, 4pps, 8pps, landscape, portrait)
* new config option: HARDWARE_DUPLEX; set this for printers
that can handle duplex printing by themselves
* new function: ps_postprocessing() handles all PS_UTILS etc.
* tray selection for duplex printers (as a shell function)
* more class options: shortbind, longbind, tray0...tray9,
book; related config options: BINDING, PAPERTRAY, PS_BOOK
* give some more info on how to manually flip sheets
* SETUP: fix SMB_FLAGS line for smbclient.conf
* use "-r" option for many read operations
* small fixes here and there
Update to this snap is highly recommended.
Michael Loßin <phallobst@web.de>
--------------------------------
Here are some small changes to the duplex code, more class stuff
and several minor tweaks:
* duplex printing:
- "forced simplex" mode was totally fscked up
(infinite loop _and_ wrong print command)
- use psselect _or_ pstops to extract odd/even pages
- one less temporary file
* new function send_mail for duplex and failure messages
* DVIPS_REVERSE and ACROREAD_REVERSE are gone; PS_UTILS
should be used to correct _all_ file formats
* new class options:
- a3,a4,letter,legal,ledger (paper size)
- a2ps,mpage,recode (ASCII filter)
- 1pps,2pps,4pps,8pps (pages per sheet)
- border,noborder,header,noheader (ASCII style)
- landscape (force orientation for ASCII and DVI)
- simplex (force non-duplex mode)
- color,mono (color handling)
* FAQ update
* slight manpage fixes
* Makefile fixes
* small cosmetic changes here and there
changes from me:
----------------
* SETUP: A -> abort, I -> install a printer, Q finish installation
I think quit is the usual leave operation
* hint for FreeBSD ports collection, not to install manpages
* SETUP, apsfilter: Change my mail address to andreas@apsfilter.org
* SETUP: make more clear how to restart the lineprinter scheduler
* SETUP: install_man_pages:
- document 'default' to not install manpages when simply
hitting RETURN, ie. when installing from FreeBSD ports
collection
- its not clear if FreeBSD user used ports collection or
not, so ask if manual pages should be installed or not
* SETUP: save 2 seconds sleep by combining a message
* FAQ, use the SGML based version
Changes to the FAQ should directly be made to the doc tree !
* TODO: remove resolved items, update some ITEMS and one new.
machine). So here now some bugfixes to make SETUP work again !
* SETUP: fix permissions of $SPOOLDIR
700 was to restrictive for BSD.
TODO: "clone" permissions of $SPOOL
* SETUP: bugfix: BSD needs /usr/sbin in PATH to find chown.
added /sbin as well, since this is unexpensive and possibly
needed for other systems.
* SETUP: cosmetic, reformat menues to still fit within 25 lines
* SETUP: fix: grep -c needs an argument (".") in echo "\c" | grep -c .
to work on FreeBSD and possibly other BSDs with GNU grep 2.4
my dual PIII-700 trying to figure out the sizes of the
primary and secondary caches. The sizes turned out to be
rather wrong (definetly true for the L2 cache, may be L1
is indeed 32Kb). Their algorithm seems bogus to me, but
most importantly, the obtained values are NOT USED
anywhere in the GhostScript code... One of the submitted
patches rips the "cache size" section from the genarch
entirely.
The attached modification and new patches also:
. replace the use of mktemp/fopen with mkstemp/fdopen
. modify the unix-gcc.mak so that there is no need for
GNU-make
PR: 20038
Submitted by: Mikhail Teterin <mi@aldan.algebra.com>
