Commit Graph

36 Commits

Author SHA1 Message Date
David E. O'Brien
78ab65a396 Change Id->FreeBSD. 1999-08-25 04:36:31 +00:00
Tim Vanderhoek
748713c3f6 As threatened, enforce the "Capital, no period" rule. Ellipses are
permitted.  Note that, given current numeric motif of PW, this is done
in four equally-sized commits of 393 files each.
1999-06-26 17:19:19 +00:00
Thomas Gellekum
25490e549c Forget about ${PREFIX}/include/giflib. 1999-05-27 07:32:49 +00:00
Stefan Eßer
c6161bba71 Upgrade KDE to Release 1.1.1. 1999-05-03 22:29:39 +00:00
Kris Kennaway
9389c4de2d Port now uses a .tar.bz2 distfile
Forgotten by:	se
1999-04-03 04:10:40 +00:00
Stefan Eßer
3470e8278e Fix MASTER_SITE_SUBDIR and add USE_BZIP2. 1999-03-24 23:41:16 +00:00
Stefan Eßer
87bf3684b2 Remove extra argument to "configure" that had been committed by accident. 1999-02-08 22:30:01 +00:00
Stefan Eßer
dd6fe9e879 Upgrade to KDE 1.1 RELEASE. 1999-02-08 22:25:54 +00:00
Stefan Eßer
523f3928b7 Upgrade to KDE-1.1pre2 ... 1999-02-06 23:22:08 +00:00
Satoshi Asami
5114e2637e Adjust port Makefiles to new EXTRACT_* variable defaults. See log of
bsd.port.mk rev. 1.304 for details on the change.

The fix here is one of the following.

(1) Define USE_BZIP2 instead of BUILD_DEPENDS on bzip2 and redefining
    EXTRACT_* commands.

(2) Change ${EXTRACT_CMD} to ${TAR} when the command is obviously
    calling the "tar" command (i.e., arguments like "-xzf" are spelled
    out).

(3) If ${EXTRACT_CMD} is called directly with ${EXTRACT_BEFORE_ARGS},
    add ${EXTRACT_AFTER_ARGS} to the command line as well.

(4) If any of EXTRACT_CMD, EXTRACT_BEFORE_ARGS or EXTRACT_AFTER_ARGS
    is set, define the other two too.
1999-02-03 11:12:01 +00:00
Satoshi Asami
9c1703446b Add bzip2 dependency. They were missing in some kde*11 Makefiles. 1999-01-11 02:13:24 +00:00
Satoshi Asami
a949ff1e14 Make dependency lines point to right directories -- they were still
using the old names (without "11").
1999-01-08 09:54:21 +00:00
Stefan Eßer
8f11472006 Upgrade to the first pre-release of KDE 1.1.
This port requireat least s version 1.41 of the Qt library.
There will be an error reported by configure, if only an earlier
version is found, but no automatic port dependency exists (i.e.
the x11-toolkits/qt141 port has to be manually built and installed).

There may still be a problem with a missing -lXext in the kdesupport
port. This will be taken care of during the next few days, if the
problem still exists ...
1999-01-07 00:52:05 +00:00
Satoshi Asami
afaa25f0cc Mark these broken while Stefan works on an upgrade. 1999-01-06 05:42:38 +00:00
Satoshi Asami
2a9e0a1212 Change categories to "audio kde". It was (believe me or not) "x11". 1998-12-01 01:49:40 +00:00
Justin M. Seger
34a4d5a401 Unbreak for current.
Submitted by:	ken@plutotech.com
1998-10-13 03:38:51 +00:00
Justin M. Seger
95ed4343e5 Mark BROKEN for current. Can't find scsi.h 1998-10-11 07:31:38 +00:00
Brian Somers
9a98226b5f Elfify
Add -lstdc++ in kscd/Makefile.in - someone should test this for -stable ;-/
1998-10-01 18:35:38 +00:00
Justin M. Seger
c94a576e69 Mark all KDE ports BROKEN for ELF. 1998-09-30 02:07:28 +00:00
Steve Price
dcf1287e4d giflib is now converted to ELF so remove regexp support. 1998-09-19 01:33:49 +00:00
Satoshi Asami
4dc064b0c5 jpeg is now converted to ELF so change LIB_DEPENDS lines accordingly.
(Note, since the shlib major didn't change this just removes the regexp
 support.)
1998-09-15 11:46:15 +00:00
Satoshi Asami
65edaaa1f5 Replace qt dependencies with USE_QT.
(Also, net/licq/Makefile: No need to define both HAS_CONFIGURE and
 GNU_CONFIGURE)
1998-08-12 06:29:36 +00:00
Satoshi Asami
5264cbceb5 Fix up dependencies for ports that moved into the x11-toolkits category. 1998-08-07 23:56:56 +00:00
Stefan Eßer
84377cc5f9 Change dependencies to accept Qt-1.33 if present,
but to build Qt-1.40 if no compiled Qt library can be found.
1998-07-23 20:52:04 +00:00
Stefan Eßer
dba66df449 Upgrade to KDE Release 1.0
Based on:	patches for a 1.0 pre-release submitted by Thomas Gellekum.
1998-07-19 17:55:29 +00:00
Marc G. Fournier
c73d08c2d5 Change to UNBROKEN ...
Add USE_GMAKE to get past a compile problem in kmid
Remove patches, as were not required to cleanly compile
1998-07-09 03:52:45 +00:00
Marc G. Fournier
617c3b4941 Still marked BROKEN, but this gets me to the extract stage, and, removing
all the patches, configured and compiling.

Haven't removed the patches yet, until I see a clean compile...
1998-07-09 02:38:00 +00:00
Marc G. Fournier
08f64accf3 Still marked BROKEN, but at least you can retrieve the files now...will work
on compiling it from my X machine later tonight...
1998-07-08 14:03:22 +00:00
Justin M. Seger
18f33c0f93 Change JPEG shared library number to 9. This is to make sure that everyone
installs the version of the port that uses shared library number 9 and the
LIBRARY_VERSION set to the default.  Normally this is against our policy
(bumping the version number for minor things), however due to the major
problems caused with the upgrade, Satoshi and I decided that this was best.

Approved by:    asami
1998-05-04 20:23:32 +00:00
Satoshi Asami
ec5964244e Mark this port broken, it's left behind in the beta-4.1 upgrade and
no longer builds.
1998-04-29 00:10:31 +00:00
Justin M. Seger
b5544f1358 Switch remaining ports to use jpeg lib version 8.0. 1998-04-15 22:18:24 +00:00
Satoshi Asami
6ffec350f0 Add back PKGNAME (removed by the previous commit). 1998-03-17 05:18:22 +00:00
Stefan Eßer
1ecf9ece5a Use $(MASTER_SITE_KDE) 1998-03-06 19:52:23 +00:00
Stefan Eßer
e490d2a083 Update to KDE Beta3 1998-03-04 23:22:26 +00:00
Satoshi Asami
9c10702533 Add PKGNAME ("-Beta2-1" is not a valid version number). Change "Beta1"
to "Beta2" in MASTER_SITES paths so this port will fetch.
1997-12-25 21:39:37 +00:00
Stefan Eßer
5b88e75ca9 The KDE multi-media tools: CD player, mixer, MIDI player.
The device name of the CD drive is hardwired into kscd,
see patch-ag for the location of the definition.
1997-12-24 13:58:22 +00:00