Commit Graph

38 Commits

Author SHA1 Message Date
Stefan Eßer
833e387518 Update to KDE-1.1.2 1999-09-18 09:02:12 +00:00
Steve Price
2169e434e8 The version number of libgif.so has changed to 5. 1999-09-18 03:12:11 +00:00
Steve Price
ec1b2d16ed The tiff port now lives in ports/graphics/tiff. 1999-09-07 10:45:31 +00:00
Peter Wemm
e17439d50d $Id$ -> $FreeBSD$ 1999-08-31 02:51:23 +00:00
Chris Piazza
8245eaccc6 Pass ${LOCALBASE}/(lib,include) as CPPFLAGS/LDFLAGS so installing
into another prefix will find libjpeg.

Most (if not all) of the kde ports will similarly have to be changed.
1999-08-25 05:18:43 +00:00
Stefan Eßer
c6161bba71 Upgrade KDE to Release 1.1.1. 1999-05-03 22:29:39 +00:00
Satoshi Asami
3d45976da3 Portlint. 1999-02-28 21:48:09 +00:00
David E. O'Brien
732390dac1 MASTER_SITE_SUBDIR was broken. My choices in fixing were either go with
GZIP or BZIP2 distfiles.  I went with BZIP2.
1999-02-28 06:06:25 +00:00
Stefan Eßer
dd6fe9e879 Upgrade to KDE 1.1 RELEASE. 1999-02-08 22:25:54 +00:00
Stefan Eßer
523f3928b7 Upgrade to KDE-1.1pre2 ... 1999-02-06 23:22:08 +00:00
Satoshi Asami
5114e2637e Adjust port Makefiles to new EXTRACT_* variable defaults. See log of
bsd.port.mk rev. 1.304 for details on the change.

The fix here is one of the following.

(1) Define USE_BZIP2 instead of BUILD_DEPENDS on bzip2 and redefining
    EXTRACT_* commands.

(2) Change ${EXTRACT_CMD} to ${TAR} when the command is obviously
    calling the "tar" command (i.e., arguments like "-xzf" are spelled
    out).

(3) If ${EXTRACT_CMD} is called directly with ${EXTRACT_BEFORE_ARGS},
    add ${EXTRACT_AFTER_ARGS} to the command line as well.

(4) If any of EXTRACT_CMD, EXTRACT_BEFORE_ARGS or EXTRACT_AFTER_ARGS
    is set, define the other two too.
1999-02-03 11:12:01 +00:00
Satoshi Asami
274dff273c The red face you see behind the table is yours truly being ashamed by
committing a patch without testing.
1999-01-21 04:32:54 +00:00
Satoshi Asami
cc7d7ac38a Fix ordering of ln -s arguments -- the lib*.so symlinks were not properly
made, causing other kde*11 builds to fall over if dependencies were installed
from packages.
1999-01-21 00:54:24 +00:00
Stefan Eßer
8f11472006 Upgrade to the first pre-release of KDE 1.1.
This port requireat least s version 1.41 of the Qt library.
There will be an error reported by configure, if only an earlier
version is found, but no automatic port dependency exists (i.e.
the x11-toolkits/qt141 port has to be manually built and installed).

There may still be a problem with a missing -lXext in the kdesupport
port. This will be taken care of during the next few days, if the
problem still exists ...
1999-01-07 00:52:05 +00:00
Satoshi Asami
afaa25f0cc Mark these broken while Stefan works on an upgrade. 1999-01-06 05:42:38 +00:00
Satoshi Asami
96bc8048c3 Use bsd.port.{pre,post}.mk to move PORTOBJFORMAT to front, or change
shell loops to make loops.  Use EXTRA_PKG_FLAGS to add install scripts
instead of adding it to PKG_FLAGS after bsd.port.mk.
1998-11-14 09:43:39 +00:00
Jun Kuriyama
06f40e8a25 Add missing *.so symlinks and add ${LN} for aout systems. 1998-10-10 06:43:49 +00:00
Brian Somers
17960648ef Elfify (no response from the maintainer)
With some help from postings by: Hans Petter Bieker <zerium@webindex.no>
1998-10-01 18:35:36 +00:00
Justin M. Seger
354b6160fa This port hasn't been converted to work with ELF yet.
Mark BROKEN_ELF.
1998-09-30 01:57:21 +00:00
Steve Price
dcf1287e4d giflib is now converted to ELF so remove regexp support. 1998-09-19 01:33:49 +00:00
Satoshi Asami
4dc064b0c5 jpeg is now converted to ELF so change LIB_DEPENDS lines accordingly.
(Note, since the shlib major didn't change this just removes the regexp
 support.)
1998-09-15 11:46:15 +00:00
Satoshi Asami
65edaaa1f5 Replace qt dependencies with USE_QT.
(Also, net/licq/Makefile: No need to define both HAS_CONFIGURE and
 GNU_CONFIGURE)
1998-08-12 06:29:36 +00:00
Satoshi Asami
5264cbceb5 Fix up dependencies for ports that moved into the x11-toolkits category. 1998-08-07 23:56:56 +00:00
Stefan Eßer
84377cc5f9 Change dependencies to accept Qt-1.33 if present,
but to build Qt-1.40 if no compiled Qt library can be found.
1998-07-23 20:52:04 +00:00
Stefan Eßer
b5072b14e7 Upgrade to KDE Release 1.0
Partially based on patches prepared by Thomas Gellekum.
1998-07-13 23:36:02 +00:00
Stefan Eßer
5946a6428f Minimum required version of Qt is 1.31 1998-05-21 21:31:58 +00:00
Justin M. Seger
18f33c0f93 Change JPEG shared library number to 9. This is to make sure that everyone
installs the version of the port that uses shared library number 9 and the
LIBRARY_VERSION set to the default.  Normally this is against our policy
(bumping the version number for minor things), however due to the major
problems caused with the upgrade, Satoshi and I decided that this was best.

Approved by:    asami
1998-05-04 20:23:32 +00:00
Stefan Eßer
527825c10d Update to KDE Beta4. 1998-04-25 07:33:05 +00:00
Justin M. Seger
b5544f1358 Switch remaining ports to use jpeg lib version 8.0. 1998-04-15 22:18:24 +00:00
Stefan Eßer
1ecf9ece5a Use $(MASTER_SITE_KDE) 1998-03-06 19:52:23 +00:00
Stefan Eßer
8a824b3975 Clean up Makefile 1998-02-15 22:18:32 +00:00
Stefan Eßer
04ca42b6b6 Upgrade to KDE Beta3:
Recompile all your applications!

Only the minor revision of the shared libraries changed, but
they are not really upward compatible with those from Beta2!
1998-02-07 11:55:47 +00:00
Stefan Eßer
a04ee5160f Update to Beta2 1997-11-27 00:29:58 +00:00
Thomas Gellekum
a2d6cd4a5c Run `ldconfig -m' on ${PREFIX}/lib, not on
${PREFIX}/share/doc/HTML/en/kdelibs ;-).
1997-11-11 07:28:19 +00:00
Satoshi Asami
d061b93fbb kdelibs requires at least qt-1.30. Probably just a typo, as the other
kde* ports have it this way already.
1997-11-05 21:31:52 +00:00
Satoshi Asami
ab4c4c3135 (1) Move the following ports out of x11/:
kdegames   -> games/
    kdenetwork -> net/
    kdesupport -> converters/
    kdeutils   -> misc/

    (Repository copy already done, dependency path and category name fixups
     is being done in this commit.)

(2) Add a virtual category "kde" and add all six (incl. x11/kde{base,lib})
    ports.

(3) Make package names follow the convention.

(4) Change "BUILD_DEPENDS=${X11R6}/bin/moc:..." to "...=moc:...".
    There is no need to specify the full pathname if the target is an
    executable in the standard path.  (Actually, as the same port is
    specified in LIB_DEPENDS, I think we can completely do away with
    this line but since Stefan added this explicitly, I assume there
    is a reason for it and left it alone.)

Approved by:	se (all but 4)
1997-11-05 04:20:23 +00:00
Stefan Eßer
53313e608c Add BUILD_DEPENDS on moc pre-processor.
Make LIB_DEPENDS accept both libjpeg.so.6.0 and 7.0, as
requested by TOYONAGA Tatsuto <toyonaga@msd.ts.fujitsu.co.jp>
1997-11-03 00:25:44 +00:00
Stefan Eßer
1449f40eb6 Initial port of the KDE support libraries. Required by all other parts of KDE.
The use of --x-inc and --x-lib to pass in multiple directories is a hack,
and should be replaced by a more robust approach. It works, but relies on
implementation details of the configure script.
1997-11-01 14:21:18 +00:00