- Update to 1.0.4
- Changes:
- K3b now silently allows the burning of files bigger than 4 GB if an
appropriate version of genisoimage or mkisofs is installed
("silently" means that I did not introduce any new messages).
- I was not able to find the awful "disabled DMA" bug but I introduced
a little workaround which hopefully solves it for many of you (BTW:
K3b from svn trunk does support DVD burning with cdrecord.)
- Never use growisofs parameter -dvd-compat with DVD-RW media in
restricted overwrite mode (some drives do not like that).
- Unmount medium before DVD formatting.
PR: ports/118535
Approved by: Heiner <h.eichmann@gmx.de> (maintainer)
linimon (mentor)
This commit is contained in:
Beech Rintoul
parent
9e9592d925
commit
355d40751b
Notes:
svn2git
2021-03-31 03:12:20 +00:00
svn path=/head/; revision=203163
@ -6,8 +6,7 @@
|
||||
#
|
||||
|
||||
PORTNAME= k3b
|
||||
PORTVERSION= 1.0.3
|
||||
PORTREVISION= 1
|
||||
PORTVERSION= 1.0.4
|
||||
CATEGORIES= sysutils multimedia kde
|
||||
MASTER_SITES= ${MASTER_SITE_SOURCEFORGE}
|
||||
MASTER_SITE_SUBDIR= ${PORTNAME}
|
||||
|
||||
@ -1,3 +1,3 @@
|
||||
MD5 (k3b-1.0.3.tar.bz2) = ca9b761045cac9aeccdf1b941a310996
|
||||
SHA256 (k3b-1.0.3.tar.bz2) = c5d1afe150de90c898f6566e14bf1e3d868dc4a9e8523c2065b283108b410eb9
|
||||
SIZE (k3b-1.0.3.tar.bz2) = 5092806
|
||||
MD5 (k3b-1.0.4.tar.bz2) = 42538ddae0809707d3bcdbe0a6ed6a43
|
||||
SHA256 (k3b-1.0.4.tar.bz2) = 2b384127c330bf6c9ef5d08733b0da2d815aec66893a8fc628b746181f06d4bb
|
||||
SIZE (k3b-1.0.4.tar.bz2) = 5115790
|
||||
|
||||
@ -25,20 +25,21 @@ Notes for FreeBSD 5.x and onwards users:
|
||||
Alternatively (especially if you are using hot plug capable CD or
|
||||
DVD drives) you could add an 'add path 'cd*' mode 666' or an
|
||||
'add path 'cd*' mode 660 group XXX' to your /etc/devfs.rules
|
||||
under '[system=10]'. To enable it, add a 'devfs_system_ruleset="system"'
|
||||
to your /etc/rc.conf.
|
||||
under '[system=10]'. To enable it, add a
|
||||
'devfs_system_ruleset="system"' to your /etc/rc.conf.
|
||||
- or just give mount and umount the suid flag, which is a security leak.
|
||||
3c. Every user who should be able to use k3b must have read and write access
|
||||
to all pass through devices connected with CD and DVD drives and to the
|
||||
/dev/xpt0 device. Run 'camcontrol devlist' to identify those devices (seek
|
||||
string 'passX' at the end of each line and modify the rights of
|
||||
/dev/passX). Note, that this is a security leak as well but that there is
|
||||
no alternative! To make this changes permanent, add 'devd_enable="YES"'
|
||||
to /etc/rc.conf as described above. Furthermore add a 'perm passX 666'
|
||||
for each pass device and a 'perm xpt0 666'. If you prefer to bind the
|
||||
access rights to a group, use the own command as described above. If you
|
||||
prefer to set this rights dynamically, add a line 'add path 'pass*' ...'
|
||||
to your /etc/devfs.rules as described above.
|
||||
string 'passX' at the end of each line) and modify the rights of
|
||||
/dev/passX. Note, that this is a security leak as well but that there is no
|
||||
alternative!
|
||||
To make this changes permanent, add (as described above) a
|
||||
'devd_enable="YES"' to /etc/rc.conf and a 'perm passX 666' for each pass
|
||||
device and a 'perm xpt0 666' to /etc/devfs.conf. If you prefer to bind
|
||||
the access rights to a group, use the 'own' command as described above.
|
||||
Instead, if you prefer to set this rights dynamically, add a line
|
||||
'add path 'pass*' ...' to your /etc/devfs.rules as described above.
|
||||
4. Check, that DMA is activated for atapi devices: 'sysctl hw.ata.atapi_dma'
|
||||
If not, set it to 1 and put a 'hw.ata.atapi_dma=1' into /boot/loader.conf.
|
||||
5. Create a directory on a partition, which has enough disk space to hold a CDs
|
||||
|
||||
@ -6,8 +6,7 @@
|
||||
#
|
||||
|
||||
PORTNAME= k3b
|
||||
PORTVERSION= 1.0.3
|
||||
PORTREVISION= 1
|
||||
PORTVERSION= 1.0.4
|
||||
CATEGORIES= sysutils multimedia kde
|
||||
MASTER_SITES= ${MASTER_SITE_SOURCEFORGE}
|
||||
MASTER_SITE_SUBDIR= ${PORTNAME}
|
||||
|
||||
@ -1,3 +1,3 @@
|
||||
MD5 (k3b-1.0.3.tar.bz2) = ca9b761045cac9aeccdf1b941a310996
|
||||
SHA256 (k3b-1.0.3.tar.bz2) = c5d1afe150de90c898f6566e14bf1e3d868dc4a9e8523c2065b283108b410eb9
|
||||
SIZE (k3b-1.0.3.tar.bz2) = 5092806
|
||||
MD5 (k3b-1.0.4.tar.bz2) = 42538ddae0809707d3bcdbe0a6ed6a43
|
||||
SHA256 (k3b-1.0.4.tar.bz2) = 2b384127c330bf6c9ef5d08733b0da2d815aec66893a8fc628b746181f06d4bb
|
||||
SIZE (k3b-1.0.4.tar.bz2) = 5115790
|
||||
|
||||
@ -25,20 +25,21 @@ Notes for FreeBSD 5.x and onwards users:
|
||||
Alternatively (especially if you are using hot plug capable CD or
|
||||
DVD drives) you could add an 'add path 'cd*' mode 666' or an
|
||||
'add path 'cd*' mode 660 group XXX' to your /etc/devfs.rules
|
||||
under '[system=10]'. To enable it, add a 'devfs_system_ruleset="system"'
|
||||
to your /etc/rc.conf.
|
||||
under '[system=10]'. To enable it, add a
|
||||
'devfs_system_ruleset="system"' to your /etc/rc.conf.
|
||||
- or just give mount and umount the suid flag, which is a security leak.
|
||||
3c. Every user who should be able to use k3b must have read and write access
|
||||
to all pass through devices connected with CD and DVD drives and to the
|
||||
/dev/xpt0 device. Run 'camcontrol devlist' to identify those devices (seek
|
||||
string 'passX' at the end of each line and modify the rights of
|
||||
/dev/passX). Note, that this is a security leak as well but that there is
|
||||
no alternative! To make this changes permanent, add 'devd_enable="YES"'
|
||||
to /etc/rc.conf as described above. Furthermore add a 'perm passX 666'
|
||||
for each pass device and a 'perm xpt0 666'. If you prefer to bind the
|
||||
access rights to a group, use the own command as described above. If you
|
||||
prefer to set this rights dynamically, add a line 'add path 'pass*' ...'
|
||||
to your /etc/devfs.rules as described above.
|
||||
string 'passX' at the end of each line) and modify the rights of
|
||||
/dev/passX. Note, that this is a security leak as well but that there is no
|
||||
alternative!
|
||||
To make this changes permanent, add (as described above) a
|
||||
'devd_enable="YES"' to /etc/rc.conf and a 'perm passX 666' for each pass
|
||||
device and a 'perm xpt0 666' to /etc/devfs.conf. If you prefer to bind
|
||||
the access rights to a group, use the 'own' command as described above.
|
||||
Instead, if you prefer to set this rights dynamically, add a line
|
||||
'add path 'pass*' ...' to your /etc/devfs.rules as described above.
|
||||
4. Check, that DMA is activated for atapi devices: 'sysctl hw.ata.atapi_dma'
|
||||
If not, set it to 1 and put a 'hw.ata.atapi_dma=1' into /boot/loader.conf.
|
||||
5. Create a directory on a partition, which has enough disk space to hold a CDs
|
||||
|
||||
Loading…
Reference in New Issue
Block a user