Polish pkg-descr and pkg-message:

. add comments and warnings about problems with chroot into the linux base;  [1]
. delete a note about linux port for alpha;  [1]
. add an advice to use linux_dist ports for cross-development;  [1]
. fix the link linux-XFree86-libs -> linux-xorg-libs.

Submitted by:	netchild (at freebsd-emulation@)  [1]

emulators/linux_base-c6/pkg-descr

@@ -1,9 +1,14 @@
 This port contains packages from a near-minimal installation of Fedora Core
 Linux 4.  These packages, in conjunction with the linux kernel module,
-form the basis of the Linux compatibility environment.
+form the basis of the Linux compatibility environment. It is designed to
+provide a nice user experience by using the FreeBSD configuration for
+corresponding Linux stuff where possible. Because of this any work which
+needs to chroot into the linux base may not work as expected (no fallthrough
+to the FreeBSD config possible).
 
 This port is only available for the i386/amd64 architecture (i386/32 bit mode). 
-If you use an Alpha computer, please install the linux_base port instead
-of this one.
 
-If you want to run X11 applications, install the x11/linux-XFree86-libs port.
+If you want to run X11 applications, install the x11/linux-xorg-libs port.
+
+For cross-development this port is not suitable, you should use a linux_dist
+port instead in this case.

emulators/linux_base-c6/pkg-message

@@ -18,3 +18,7 @@ Let your lists for hosts, passwd and group be resolved via nsswitch.conf:
 	shadow:	files nis
 	group:	files nis
 	hosts:	files dns nis
+
+WARNING: doing work which needs to chroot into the linux base may not work.
+In such cases (e.g. cross-development) you are better suited with a linux_dist
+port.

emulators/linux_base-f10/pkg-descr

@@ -1,9 +1,14 @@
 This port contains packages from a near-minimal installation of Fedora Core
 Linux 4.  These packages, in conjunction with the linux kernel module,
-form the basis of the Linux compatibility environment.
+form the basis of the Linux compatibility environment. It is designed to
+provide a nice user experience by using the FreeBSD configuration for
+corresponding Linux stuff where possible. Because of this any work which
+needs to chroot into the linux base may not work as expected (no fallthrough
+to the FreeBSD config possible).
 
 This port is only available for the i386/amd64 architecture (i386/32 bit mode). 
-If you use an Alpha computer, please install the linux_base port instead
-of this one.
 
-If you want to run X11 applications, install the x11/linux-XFree86-libs port.
+If you want to run X11 applications, install the x11/linux-xorg-libs port.
+
+For cross-development this port is not suitable, you should use a linux_dist
+port instead in this case.

emulators/linux_base-f10/pkg-message

@@ -18,3 +18,7 @@ Let your lists for hosts, passwd and group be resolved via nsswitch.conf:
 	shadow:	files nis
 	group:	files nis
 	hosts:	files dns nis
+
+WARNING: doing work which needs to chroot into the linux base may not work.
+In such cases (e.g. cross-development) you are better suited with a linux_dist
+port.

emulators/linux_base-f7/pkg-descr

@@ -1,9 +1,14 @@
 This port contains packages from a near-minimal installation of Fedora Core
 Linux 4.  These packages, in conjunction with the linux kernel module,
-form the basis of the Linux compatibility environment.
+form the basis of the Linux compatibility environment. It is designed to
+provide a nice user experience by using the FreeBSD configuration for
+corresponding Linux stuff where possible. Because of this any work which
+needs to chroot into the linux base may not work as expected (no fallthrough
+to the FreeBSD config possible).
 
 This port is only available for the i386/amd64 architecture (i386/32 bit mode). 
-If you use an Alpha computer, please install the linux_base port instead
-of this one.
 
-If you want to run X11 applications, install the x11/linux-XFree86-libs port.
+If you want to run X11 applications, install the x11/linux-xorg-libs port.
+
+For cross-development this port is not suitable, you should use a linux_dist
+port instead in this case.

emulators/linux_base-f7/pkg-message

@@ -18,3 +18,7 @@ Let your lists for hosts, passwd and group be resolved via nsswitch.conf:
 	shadow:	files nis
 	group:	files nis
 	hosts:	files dns nis
+
+WARNING: doing work which needs to chroot into the linux base may not work.
+In such cases (e.g. cross-development) you are better suited with a linux_dist
+port.

emulators/linux_base-f8/pkg-descr

@@ -1,9 +1,14 @@
 This port contains packages from a near-minimal installation of Fedora Core
 Linux 4.  These packages, in conjunction with the linux kernel module,
-form the basis of the Linux compatibility environment.
+form the basis of the Linux compatibility environment. It is designed to
+provide a nice user experience by using the FreeBSD configuration for
+corresponding Linux stuff where possible. Because of this any work which
+needs to chroot into the linux base may not work as expected (no fallthrough
+to the FreeBSD config possible).
 
 This port is only available for the i386/amd64 architecture (i386/32 bit mode). 
-If you use an Alpha computer, please install the linux_base port instead
-of this one.
 
-If you want to run X11 applications, install the x11/linux-XFree86-libs port.
+If you want to run X11 applications, install the x11/linux-xorg-libs port.
+
+For cross-development this port is not suitable, you should use a linux_dist
+port instead in this case.

emulators/linux_base-f8/pkg-message

@@ -18,3 +18,7 @@ Let your lists for hosts, passwd and group be resolved via nsswitch.conf:
 	shadow:	files nis
 	group:	files nis
 	hosts:	files dns nis
+
+WARNING: doing work which needs to chroot into the linux base may not work.
+In such cases (e.g. cross-development) you are better suited with a linux_dist
+port.

emulators/linux_base-f9/linux_base-f8/pkg-descr

@@ -1,9 +1,14 @@
 This port contains packages from a near-minimal installation of Fedora Core
 Linux 4.  These packages, in conjunction with the linux kernel module,
-form the basis of the Linux compatibility environment.
+form the basis of the Linux compatibility environment. It is designed to
+provide a nice user experience by using the FreeBSD configuration for
+corresponding Linux stuff where possible. Because of this any work which
+needs to chroot into the linux base may not work as expected (no fallthrough
+to the FreeBSD config possible).
 
 This port is only available for the i386/amd64 architecture (i386/32 bit mode). 
-If you use an Alpha computer, please install the linux_base port instead
-of this one.
 
-If you want to run X11 applications, install the x11/linux-XFree86-libs port.
+If you want to run X11 applications, install the x11/linux-xorg-libs port.
+
+For cross-development this port is not suitable, you should use a linux_dist
+port instead in this case.

emulators/linux_base-f9/linux_base-f8/pkg-message

@@ -18,3 +18,7 @@ Let your lists for hosts, passwd and group be resolved via nsswitch.conf:
 	shadow:	files nis
 	group:	files nis
 	hosts:	files dns nis
+
+WARNING: doing work which needs to chroot into the linux base may not work.
+In such cases (e.g. cross-development) you are better suited with a linux_dist
+port.

emulators/linux_base-f9/pkg-descr

@@ -1,9 +1,14 @@
 This port contains packages from a near-minimal installation of Fedora Core
 Linux 4.  These packages, in conjunction with the linux kernel module,
-form the basis of the Linux compatibility environment.
+form the basis of the Linux compatibility environment. It is designed to
+provide a nice user experience by using the FreeBSD configuration for
+corresponding Linux stuff where possible. Because of this any work which
+needs to chroot into the linux base may not work as expected (no fallthrough
+to the FreeBSD config possible).
 
 This port is only available for the i386/amd64 architecture (i386/32 bit mode). 
-If you use an Alpha computer, please install the linux_base port instead
-of this one.
 
-If you want to run X11 applications, install the x11/linux-XFree86-libs port.
+If you want to run X11 applications, install the x11/linux-xorg-libs port.
+
+For cross-development this port is not suitable, you should use a linux_dist
+port instead in this case.

emulators/linux_base-f9/pkg-message

@@ -18,3 +18,7 @@ Let your lists for hosts, passwd and group be resolved via nsswitch.conf:
 	shadow:	files nis
 	group:	files nis
 	hosts:	files dns nis
+
+WARNING: doing work which needs to chroot into the linux base may not work.
+In such cases (e.g. cross-development) you are better suited with a linux_dist
+port.

emulators/linux_base-fc4/pkg-descr

@@ -1,9 +1,14 @@
 This port contains packages from a near-minimal installation of Fedora Core
 Linux 4.  These packages, in conjunction with the linux kernel module,
-form the basis of the Linux compatibility environment.
+form the basis of the Linux compatibility environment. It is designed to
+provide a nice user experience by using the FreeBSD configuration for
+corresponding Linux stuff where possible. Because of this any work which
+needs to chroot into the linux base may not work as expected (no fallthrough
+to the FreeBSD config possible).
 
 This port is only available for the i386/amd64 architecture (i386/32 bit mode). 
-If you use an Alpha computer, please install the linux_base port instead
-of this one.
 
-If you want to run X11 applications, install the x11/linux-XFree86-libs port.
+If you want to run X11 applications, install the x11/linux-xorg-libs port.
+
+For cross-development this port is not suitable, you should use a linux_dist
+port instead in this case.

emulators/linux_base-fc4/pkg-message

@@ -18,3 +18,7 @@ Let your lists for hosts, passwd and group be resolved via nsswitch.conf:
 	shadow:	files nis
 	group:	files nis
 	hosts:	files dns nis
+
+WARNING: doing work which needs to chroot into the linux base may not work.
+In such cases (e.g. cross-development) you are better suited with a linux_dist
+port.

emulators/linux_base-fc6/pkg-descr

@@ -1,9 +1,14 @@
 This port contains packages from a near-minimal installation of Fedora Core
 Linux 4.  These packages, in conjunction with the linux kernel module,
-form the basis of the Linux compatibility environment.
+form the basis of the Linux compatibility environment. It is designed to
+provide a nice user experience by using the FreeBSD configuration for
+corresponding Linux stuff where possible. Because of this any work which
+needs to chroot into the linux base may not work as expected (no fallthrough
+to the FreeBSD config possible).
 
 This port is only available for the i386/amd64 architecture (i386/32 bit mode). 
-If you use an Alpha computer, please install the linux_base port instead
-of this one.
 
-If you want to run X11 applications, install the x11/linux-XFree86-libs port.
+If you want to run X11 applications, install the x11/linux-xorg-libs port.
+
+For cross-development this port is not suitable, you should use a linux_dist
+port instead in this case.

emulators/linux_base-fc6/pkg-message

@@ -18,3 +18,7 @@ Let your lists for hosts, passwd and group be resolved via nsswitch.conf:
 	shadow:	files nis
 	group:	files nis
 	hosts:	files dns nis
+
+WARNING: doing work which needs to chroot into the linux base may not work.
+In such cases (e.g. cross-development) you are better suited with a linux_dist
+port.

emulators/linux_base-fc7/pkg-descr

@@ -1,9 +1,14 @@
 This port contains packages from a near-minimal installation of Fedora Core
 Linux 4.  These packages, in conjunction with the linux kernel module,
-form the basis of the Linux compatibility environment.
+form the basis of the Linux compatibility environment. It is designed to
+provide a nice user experience by using the FreeBSD configuration for
+corresponding Linux stuff where possible. Because of this any work which
+needs to chroot into the linux base may not work as expected (no fallthrough
+to the FreeBSD config possible).
 
 This port is only available for the i386/amd64 architecture (i386/32 bit mode). 
-If you use an Alpha computer, please install the linux_base port instead
-of this one.
 
-If you want to run X11 applications, install the x11/linux-XFree86-libs port.
+If you want to run X11 applications, install the x11/linux-xorg-libs port.
+
+For cross-development this port is not suitable, you should use a linux_dist
+port instead in this case.

emulators/linux_base-fc7/pkg-message

@@ -18,3 +18,7 @@ Let your lists for hosts, passwd and group be resolved via nsswitch.conf:
 	shadow:	files nis
 	group:	files nis
 	hosts:	files dns nis
+
+WARNING: doing work which needs to chroot into the linux base may not work.
+In such cases (e.g. cross-development) you are better suited with a linux_dist
+port.