update to ghostscript v 6.50
- removed port revision, because of new version
- added PCL3 driver (hpdj successor) from Martin Lottermoser
*both* driver, HPDJ and PCL3, are now compiled in
reason: PCL3 is still flagged as BETA and author didn't get much response
Although Martin says, its definitively not ALPHA, its safer to have the
old drivers around, if things fail for some reason.
Martin confirmed, that its possible to have both in one gs binary !!!
- disable configure script temporarily, since dialog needs a driver update
but I don't want to hold back that port any longer.
- enabled as many gs driver as possible
- reorganized MASTER_SITES
- added mirrors
- add a note, that russion mirror isn't up to date, so don't add it
- optimized downloading from 6 different sources by special ordering
- reorganized Makefile completely
- put only ${GS_SOURCES} into EXTRACT_ONLY variable
unpacking other 3rd party src's is handled in post-extract target
- directory creating, patching, unpacking and install actions are
now handeled within the proper make target. This makes port maintenance
much easier, i.e.: if you enter make extract, then only extraction
of things happen, but makefiles are still not patched. Before this
cleanup, things were not so structured and not easy to maintain.
Maybe we get a configure script later, to choose between different
3rd party driver options, then this "sorting" and documenting
will support the migration process...
- silence port by hiding actions with "@"
- insert many informational echoes. This makes port maintenance and
troubleshooting easier
- put more unique comments in front of the different 3rd party modules
- document things better
- use as many environment variables as necessary, so that "numerical"
changes only have to happen on some places and not withing make targets
- use gs version number also in docu directory
- properly install runtime, info and doc files from 3rd party drivers
- put not needed stuff into "NOPORTDOCS" section
- keep old font names to avoid fetching unnecessary things
- updated patches as necessary
- added new patch from Nartin Lottermoser
- removed 2 patches that have been incorporated into gs 6.50
- added needed manual pages
- updated pkg-plist
- finally tested port and package building as well as port removal
new port passes all disciplines ;-)
2001-01-16 17:57:24 -05:00
|
|
|
MD5 (ghostscript-6.50.tar.gz) = 8f52f724f692cf06c94ad7da45eb7ec1
|
new ghostscript 6.01 port after repository copy
additional changes by me:
- configure + configure.batch updates:
reviewed all informations in makefiles and driver docu
to make list of available drivers and supported printers complete
- added DeskJet 880C/882C/895C Driver from Matthew J. Gelhau
Driver is still in developement. There is a newer 1.4 beta version
available, but this version is recommended by the author.
http://www.proaxis.com/~mgelhaus/linux/software/hp880c/hp880c.html
Supported are the following models:
HP DeskJet 812C 815C 832C 880C 882C 895C 932C 970C
- added contributed uniprint driver profiles:
- configure + configure.batch updates:
reviewed all informations in makefiles and driver docu
to make list of available drivers and supported printers complete
- added DeskJet 880C/882C/895C Driver from Matthew J. Gelhau
Driver is still in developement. There is a newer 1.4 beta version
available, but this version is recommended by the author.
http://www.proaxis.com/~mgelhaus/linux/software/hp880c/hp880c.html
Supported are the following models:
HP DeskJet 812C 815C 832C 880C 882C 895C 932C 970C
- added contributed uniprint driver profiles:
printer: Epson Stylus Color 740
mode1: stc740ih.upp: Epson Stylus Color 740, 1440x720DpI, Inkjet Paper
mode2: stc740p.upp : Epson Stylus Color 740, 720x720DpI, Plain Paper
mode3: stc740pl.upp: Epson Stylus Color 740, 360x360DpI, Plain Paper
contributor: Francois D. Menard <fmenard@g6-114b.residence.usherb.ca>
#
printer: Epson LQ-1170
mode1: lqx70ch.upp : Epson LQ-1170 ESC/P2 Dot Matrix, 360x360DpI, Plain Pap.
mode2: lqx70cl.upp : Epson LQ-1170 ESC/P2 Dot Matrix, 180x180DpI, Plain Pap.
mode3: lqx70cm.upp : Epson LQ-1170 ESC/P2 Dot Matrix, 360x180DpI, Plain Pap.
contributor: Harold Bower <HalBower@worldnet.att.net>
- updated PLIST
- use GS_VERSION for DISTNAME
- fix installation path for pdf_sec.ps if defined PDFENCRYPT
- silence make install ("@")
- change COMMENT to reflect version
- update DESCR, to document driver enhancements compared to stanfard gs
release
- apsfilter will be updated later
Submitted by: "Alec Wolman" <wolman@cs.washington.edu>
2000-03-25 07:27:38 -05:00
|
|
|
MD5 (ghostscript-fonts-std-6.0.tar.gz) = 8250132d6fcc6eb1419f505f06c7690b
|
|
|
|
|
MD5 (ghostscript-fonts-other-6.0.tar.gz) = 1a643ae62ef166562e4d422b1a601272
|
2000-11-26 09:13:02 -05:00
|
|
|
MD5 (pdf_sec.ps) = 92cd6af5b4d7219e91e61b8351f0f7c4
|
new ghostscript 6.01 port after repository copy
additional changes by me:
- configure + configure.batch updates:
reviewed all informations in makefiles and driver docu
to make list of available drivers and supported printers complete
- added DeskJet 880C/882C/895C Driver from Matthew J. Gelhau
Driver is still in developement. There is a newer 1.4 beta version
available, but this version is recommended by the author.
http://www.proaxis.com/~mgelhaus/linux/software/hp880c/hp880c.html
Supported are the following models:
HP DeskJet 812C 815C 832C 880C 882C 895C 932C 970C
- added contributed uniprint driver profiles:
- configure + configure.batch updates:
reviewed all informations in makefiles and driver docu
to make list of available drivers and supported printers complete
- added DeskJet 880C/882C/895C Driver from Matthew J. Gelhau
Driver is still in developement. There is a newer 1.4 beta version
available, but this version is recommended by the author.
http://www.proaxis.com/~mgelhaus/linux/software/hp880c/hp880c.html
Supported are the following models:
HP DeskJet 812C 815C 832C 880C 882C 895C 932C 970C
- added contributed uniprint driver profiles:
printer: Epson Stylus Color 740
mode1: stc740ih.upp: Epson Stylus Color 740, 1440x720DpI, Inkjet Paper
mode2: stc740p.upp : Epson Stylus Color 740, 720x720DpI, Plain Paper
mode3: stc740pl.upp: Epson Stylus Color 740, 360x360DpI, Plain Paper
contributor: Francois D. Menard <fmenard@g6-114b.residence.usherb.ca>
#
printer: Epson LQ-1170
mode1: lqx70ch.upp : Epson LQ-1170 ESC/P2 Dot Matrix, 360x360DpI, Plain Pap.
mode2: lqx70cl.upp : Epson LQ-1170 ESC/P2 Dot Matrix, 180x180DpI, Plain Pap.
mode3: lqx70cm.upp : Epson LQ-1170 ESC/P2 Dot Matrix, 360x180DpI, Plain Pap.
contributor: Harold Bower <HalBower@worldnet.att.net>
- updated PLIST
- use GS_VERSION for DISTNAME
- fix installation path for pdf_sec.ps if defined PDFENCRYPT
- silence make install ("@")
- change COMMENT to reflect version
- update DESCR, to document driver enhancements compared to stanfard gs
release
- apsfilter will be updated later
Submitted by: "Alec Wolman" <wolman@cs.washington.edu>
2000-03-25 07:27:38 -05:00
|
|
|
MD5 (gdevcd8.tar.gz) = 6ff0db0cb9f1190a1587ad6c335581cf
|
2000-04-20 13:31:44 -04:00
|
|
|
MD5 (hpdj-2.6.tar.gz) = dcc402281f36afd2041144e0e97917be
|
update to ghostscript v 6.50
- removed port revision, because of new version
- added PCL3 driver (hpdj successor) from Martin Lottermoser
*both* driver, HPDJ and PCL3, are now compiled in
reason: PCL3 is still flagged as BETA and author didn't get much response
Although Martin says, its definitively not ALPHA, its safer to have the
old drivers around, if things fail for some reason.
Martin confirmed, that its possible to have both in one gs binary !!!
- disable configure script temporarily, since dialog needs a driver update
but I don't want to hold back that port any longer.
- enabled as many gs driver as possible
- reorganized MASTER_SITES
- added mirrors
- add a note, that russion mirror isn't up to date, so don't add it
- optimized downloading from 6 different sources by special ordering
- reorganized Makefile completely
- put only ${GS_SOURCES} into EXTRACT_ONLY variable
unpacking other 3rd party src's is handled in post-extract target
- directory creating, patching, unpacking and install actions are
now handeled within the proper make target. This makes port maintenance
much easier, i.e.: if you enter make extract, then only extraction
of things happen, but makefiles are still not patched. Before this
cleanup, things were not so structured and not easy to maintain.
Maybe we get a configure script later, to choose between different
3rd party driver options, then this "sorting" and documenting
will support the migration process...
- silence port by hiding actions with "@"
- insert many informational echoes. This makes port maintenance and
troubleshooting easier
- put more unique comments in front of the different 3rd party modules
- document things better
- use as many environment variables as necessary, so that "numerical"
changes only have to happen on some places and not withing make targets
- use gs version number also in docu directory
- properly install runtime, info and doc files from 3rd party drivers
- put not needed stuff into "NOPORTDOCS" section
- keep old font names to avoid fetching unnecessary things
- updated patches as necessary
- added new patch from Nartin Lottermoser
- removed 2 patches that have been incorporated into gs 6.50
- added needed manual pages
- updated pkg-plist
- finally tested port and package building as well as port removal
new port passes all disciplines ;-)
2001-01-16 17:57:24 -05:00
|
|
|
MD5 (pcl3-3.0.2.tar.gz) = 66b3391815a6df6e43e636b398bd88ba
|
2000-11-26 09:13:02 -05:00
|
|
|
MD5 (gdevdj9.c.gz) = f09ef883b8ba837fb42c608c01af7375
|