Update Setup Guide

Setup-Guide.md

@@ -1,9 +1,31 @@
-- [ ] 
+# Before you get started
+Please read through this guide from start to finish. It will cover all aspects of setting up Sweetcade on your arcade cabinet.
+## Minimum Cabinet Hardware Requirements
 
-- [ ] 
+- LCD or CRT capable of displaying 640x480 resolution with VGA connector (or an **ACTIVE** DisplayPort to VGA converter)
+- Higher resolution CRTs and flat panels are supported as well
+- JAMMA edge with controls and mono audio wired on connector
+- Minimum of 1 joystick, 2 buttons (2 joysticks and 6 buttons per player is recommended)
+- AC power available to power your PC
+- For JAMMA equipped cabs, a JAMMA input encoder such as the [Ultimarc J-PAC](https://www.ultimarc.com/control-interfaces/j-pac-en/j-pac-jamma-interface/) or similar
+- For Non-JAMMA cabs, you could also use a [Taito FastIO PCB with this keyboard emulator driver](https://github.com/JoeHowse/FastIO2KB), [Brookboard](https://www.brookaccessory.com/Fighting%20Board/list.html), or a similar control encoder with some wiring work.
 
-- [ ] 
+## Minimum Computer Hardware Requirements
 
-- [ ] 
+- Dual-Core 64-bit CPU
+- 8GB RAM
+- 160GB drive (SATA or NVMe SSD recommended)
+- Nvidia GTX 700 series or newer GPU
+- Ethernet or WiFi adapter with internet connection
 
-- [ ] 
+## Recommended Computer Hardware Requirements
+
+- Quad-Core 64-bit CPU
+- 8GB RAM
+- 256GB drive (NVMe SSD)
+- Nvidia GTX 1000 series or newer GPU
+- Ethernet adapter with internet connection
+
+## Automated Installer (PLEASE READ THIS!)
+
+**AS SOON AS THE WINDOWS INSTALLER LAUNCHES IT WILL WIPE THE FIRST DRIVE IT SEES IN DISKPART. THIS WILL PERMANENTLY ERASE ANY DATA YOU MAY HAVE ON THE DRIVE. BE CAREFUL!!!**