warning:
* may be buggy
This commit adds support for sideways splits into Irssi. To that regard,
there are a number of new commands available
the "R" commands:
/window new rsplit - make a new sideways split
/window rshow - show an existing window to the right
/window rgrow/rshrink/rsize/rbalance
- manipulate the size of your sideways split windows
the "D" commands:
/window dup/ddown/dleft/dright
- navigate the windows directionally, as an alternative to
/window up/down that you can bind to some key
/window move dleft/dright - the same for moving
Enjoy!
this allows access to the global history even when a using /window history
named or /set window_history on, and you want to recall something from one
of the other windows' histories.
usage (default): ctrl+up/down
Fixes#733. The fix outlined in #452 had adverse effects for the
following reason. The code removed the restoration path that would go on
the code path from kill SIGTSTP. The problem is this: When Irssi is not
running in a controlling parent (like a shell), the TSTP will in fact be
ignored. In that case, there is no process sending a CONT either and
thus the screen state never gets restored. Luckily, the patch in #457 is
sufficient to prevent the problem in #450 (which lead to the development
of #452). To that end, we do end up with potentially calling
terminfo_cont twice but that is better than not calling it at all.
This reverts commit b1ffd5f647, reversing
changes made to 9cb0419435.
Perl sucks and kills the whole process when there's a version mismatch
in Perl_xs_handshake(). Our atexit handler catches the exit and
deinitializes the terminal, removing the error.
This commit uses the 'quitting' global variable which is set when irssi
is voluntarily quitting, and avoids sending TI_rmcup, which restores the
original screen and makes the error invisible.
This avoids the use of g_list_find() to find if a match was already
added to the list of results, by checking the last two added matches
instead.
Checking just the last match isn't enough because a NULL match is added
as a separator (shown as -- in the UI)
This applies to "/lastlog" with no filters (or with filters that don't
filter a lot) and with large amounts of text in the scrollback.
Test case:
/exec seq 1 500000
/lastlog -file log.txt
Thanks to morning for reporting this.
In glib v2.49.3, an optimization was made to eliminate certain
unnecessary wakeups. (The specific change was made in
e4ee3079c5afc3c1c3d2415f20c3e8605728f074). Before this change, the
first call to g_main_iteration would always complete immediately.
In Irssi, this effectively reversed the order of the main loop, causing
the reload_config check and the dirty_check to run *before* the first
blocking call to g_main_iteration.
With the new logic, the first g_main_iteration call now blocks,
preventing the screen from being refreshed until the user starts typing
or a timer goes off. (It also delays processing of SIGHUP, but I
expect that is not a common situation.)
This commit reorders the main loop to wait at the end of the loop,
rather than the beginning, addressing the problem.
(This closes Debian bug #856201.)
It was made redundant by the introduction of the pointer to the GRegex
structure.
Silence the compiler warning in textbuffer.c about preg being
initialized by setting it to NULL.
* Adds two new keys which you can bind in /bind:
yank_next_cutbuffer: Revert to the previous last deleted text
append_next_kill: Append next deletion
* Consecutive kills are now appended to the current cutbuffer
With bracketed paste, "a\nb" will result in two lines being pasted,
because it's a single thing, with an end marker which the timeout based
pastes don't have.
Due to the way term_gets() counts lines, that input will have
paste_line_count == 1. This can be misleading.
This code adjusts it by looking at the last character, and increasing
the count if it finds anything that isn't a newline.
The function "static void paste_buffer_join_lines(GArray *buf)" in
"src/fe-text/gui-readline.c" is supposed to join lines from the GArray
pointed to by *buf under certain circumstances.
In the code of the function "buf" is actually used for getting the length
of the GArray, but to get a pointer to the data, "paste_buffer->data" is
used; paste_buffer is defined in the scope of the whole file.
This delivers the desired result, because this function is only called
once, with "paste_buffer" as the argument. If paste_buffer_join_lines()
will ever be used with a different argument, it will fail.
term_addstr() had a long-standing fixme that suggested it didn't
take into account the string encoding when calculating the string
length.
The BIG5 code path is untested.
Both cases were off-by-one mistakes erring on the side of being too
conservative. This fixes these two harmless issues:
- For a single empty paste, it required another keystroke before
processing it
- For a sequence of themcase, a single '~' was left in the input
This actually workarounds a bug with the "st" terminal, for which i've
already submitted a patch, but irssi needs to be able to handle it
decently too.
http://bugs.irssi.org/index.php?do=details&task_id=905
Not using the patch from that ticket, the issue turned out to be that
(dest - last_lf_pos) returned number of unichr, not bytes, so that's 4
times less than what the size parameter of memmove() should be.
We disable the ICRNL flag to make Enter independent from ^J from the
keybinding point of view since the former will now send ^M, leaving the
user free to remap ^J without trapping itself into the irssi session
because of a broken Enter key.
Also disable the software flow control because we don't expect anyone to
run irssi over a serial console; we gain some more freedom by having ^Q
and ^S freely mappable by the user.
Enter the "application" mode when setting up the terminal, this improves the
compatiblity with the standards; as a side effect now DEL key works ootb when
irssi is run in the suckless's st terminal.
By temporarily raising the fatal log level to critical during irssi
start-up, we make it fail when the config file is broken. This is then
re-set so that /reload of a broken config file will not crash irssi and
just report the errors and gracefully continue instead.
this adds the CONFIG_REC * to the config_node_section and
config_node_section_index APIs as they will require access to the config
cache later on to make the config parser more robust.
Before this, doing "TERM=vt100 irssi" showed all text as bold and
blinking because of a failed check of window->term->TI_colors that
was doing (value & 8) and not expecting a value of 0.
The changed lines themselves look a bit weird, but they make more sense
in the context of the original commit, 96a292d4.
this fixes a crash due to illegal memory access that can occur if
something is printed to the screen on the "terminal resized"
handler. It is not clear to me whether this race condition can be
triggered by external incoming messages, but it might be better safe
than sorry.
Fixes FS#721
This makes Ctrl+^ and ^ bindable again as different keys. We do this
by escaping single `^` as `^-`, which is not a valid control character
(unlike `^^`)
The original approach suggested in FS#721 is insufficient, it will
break bindings such as `meta-^` because Irssi is convinced that `^`
introduces a Control-key ("key combo") so it is waiting for what may
follow.
the colour 0 was broken by the extended colours patch because it needs
an explicit bit check (lower bits will be false since it is 0)
Thanks to lhynes for the report
Fixes Github issue #97https://github.com/irssi/irssi/issues/97
Fix proposed by ailin-nemui, built and tested on Debian Jessie using
0.8.15 source, tested by GeertHauwaerts as well.
It's tricky to make the banner show first in all cases and it's unlikely
to be seen if someone is connecting to a server already, so just don't
show it.
256 colour patch is cleaned up and the remaining cases are made work,
this includes especially Theme support, which was not implemented
before. Changes not related to colours were reverted again, making a
review of the two patches against master easier to follow.
As a byproduct of the Hex-colour code parser, the 24bit colours are
also implemented. Actually using them in the terminal is guarded by a
compile time switch (as well as a run time switch), as it breaks the
existing colour protocol and requires additional storage.
To make a seamless usage, down-conversion is provided for 8 and 16
colours.
Diverging from Tom's approach, the colour protocol is reverted back to
the original one. Unfortunately, the changes required in the Theme
engine will break the API.
For more details, please refer to the patch documentation at either
http://irssi-docs.wikispaces.com/Notes-256-Colour or
https://github.com/shabble/irssi-docs/wiki/Notes-256-Colour
This patch implements some 256 colour support for Irssi up from the
previous 16 colours. Initial parsing of the %x/%X format codes is
implemented and the parser accounts in advances the char* for
that.
The colour attributes are widened from 4 to 8 bit. The colour protocol
is changed to a new format. Some pointers to remaining work are
written in the comment in textbuffer.h.
Note that Irssi already does support requesting 256 colours from the
terminal in the original source code, so this part did not have to be
touched.
The crash can happen if the terminal height decreases before the first window
is created. Based on a patch by Jaroslav Škarvada (red hat bug #796457).
git-svn-id: file:///var/www/svn.irssi.org/SVN/irssi/trunk@5217 dbcabf3a-b0e7-0310-adc4-f8d773084564
subsequent reads are associated to the same paste if they happen before
'paste_detect_time' time since the last read. If no read occurs after
'paste_detect_time' time the paste buffer is flushed; if there is at least one
complete line its content is sent as a paste, otherwise it is processed
normally.
Thanks to Emanuele Giaquinta.
git-svn-id: file:///var/www/svn.irssi.org/SVN/irssi/trunk@5121 dbcabf3a-b0e7-0310-adc4-f8d773084564
Use g_string_append_printf() instead of g_string_sprintfa() (which is considered deprecated.)
git-svn-id: file:///var/www/svn.irssi.org/SVN/irssi/trunk@5003 dbcabf3a-b0e7-0310-adc4-f8d773084564
position where to draw a new line and if the view is at the bottom of the
textbuffer, but the same information can be computed more easily by other
means.
git-svn-id: file:///var/www/svn.irssi.org/SVN/irssi/trunk@4964 dbcabf3a-b0e7-0310-adc4-f8d773084564
