When changing the value of irssiproxy_ports to use a different network
name in a port that was already bound (so like changing from asd=6667 to
sdf=6667) it would throw "address already in use".
This fixes it by delaying the add_listen() calls after all the
remove_listen() were called.
The function now skips all the leading characters that are in the STATUSMSG. If
the server didn't send the STATUSMSG option then it's assumed to be "@+" for
compatibility with bahamut 2.4 (sic).
I wrote some tests to compare the behavior but I don't know where to put
them, so i'm including them here:
assert(g_strcmp0("a", "b") == -1);
assert(g_strcmp0(NULL, "a") == -1);
assert(g_strcmp0("a", NULL) == 1);
assert(g_strcmp0("b", "a") == 1);
assert(g_strcmp0("a", "a") == 0);
assert(g_strcmp0(NULL, NULL) == 0);
Change "proxy client connected" to "proxy client connecting" to avoid being confused by clients that have connected but not necessarily authenticated. Emit "proxy client connected" once authenticated, keeping the name for backwards compatibility.
We add some additional checks into the config parser's
node_section_index, node_traverse and node_set_str functions. In
particular, we check if the requested node is of scalar or complex type
and whether this matches the value found in the config. If it does not
match, then a warning is issued appropriately and the config is
corrected.
By temporarily raising the fatal log level to critical during irssi
start-up, we make it fail when the config file is broken. This is then
re-set so that /reload of a broken config file will not crash irssi and
just report the errors and gracefully continue instead.
The change introduced in #191 will crash irssi immediately if you
accidentally try to /reload certain broken config files. It is enough to
warn the user in this case, so we turn g_error into g_critical.
this adds the CONFIG_REC * to the config_node_section and
config_node_section_index APIs as they will require access to the config
cache later on to make the config parser more robust.
sed -i 's/hv_store/(void) &/'
This only results in a warning in older gcc versions, but that includes
the one used in the Travis CI environment by default
Fixes issue #187. It's a bit annoying this can't do anything other than
exit, however as there's no schema for the config it's only possible to
validate on use. This level of config can't be accessed from Perl so a
script can't cause Irssi to die (via this method at least).
Before this, doing "TERM=vt100 irssi" showed all text as bold and
blinking because of a failed check of window->term->TI_colors that
was doing (value & 8) and not expecting a value of 0.
The changed lines themselves look a bit weird, but they make more sense
in the context of the original commit, 96a292d4.
Original patch by hondza <sedaj2@gmail.com>, from FS#833. I applied
several needed style changes, and rebased to current HEAD.
This implements the IRCv3.2 self-message extension partially (we can't
announce its support through CAP yet). This is also the format used by
the 'privmsg' znc module, and is already implemented by several other
clients.
At some point in the past few years, Flyspray changed its URL scheme from id=nnn to task_id=nnn, which broke some old comments in the source. Update those comments to URLs that still work.
Try to split long lines on spaces to avoid words being splitted. This
can be turned off with the option `split_line_on_space'. The code
assumes that the terminal encoding has ASCII spaces.
The userhost Irssi uses for line splitting can in some cases be wrong,
for instance when a proxy is used or when a server cloaks the hostname
without telling the client. Now Irssi always assumes the userhost is of
maximum length. 10 for username (common value) and 63 for hostname (in
RFC 2812).
With many ignores (a few thousand) /reload could take so long that connections
were dropped. The problem is that nickmatch_rebuild() was being called for
every ignore. The easy solution is to only call it once at the end.
this fixes a crash due to illegal memory access that can occur if
something is printed to the screen on the "terminal resized"
handler. It is not clear to me whether this race condition can be
triggered by external incoming messages, but it might be better safe
than sorry.
Fixes FS#721
This makes Ctrl+^ and ^ bindable again as different keys. We do this
by escaping single `^` as `^-`, which is not a valid control character
(unlike `^^`)
The original approach suggested in FS#721 is insufficient, it will
break bindings such as `meta-^` because Irssi is convinced that `^`
introduces a Control-key ("key combo") so it is waiting for what may
follow.
while the last patch did stop /path/.xxx from turning italic, it also
stopped any other /emphasis/ from becoming italic. correct this by
testing for ispunct, so spaces are valid italic terminators
the colour 0 was broken by the extended colours patch because it needs
an explicit bit check (lower bits will be false since it is 0)
Thanks to lhynes for the report
Fixes Github issue #97https://github.com/irssi/irssi/issues/97
Fix proposed by ailin-nemui, built and tested on Debian Jessie using
0.8.15 source, tested by GeertHauwaerts as well.
It's tricky to make the banner show first in all cases and it's unlikely
to be seen if someone is connecting to a server already, so just don't
show it.
ferret, the author of `splitlong-safe.pl' pointed out that `userhostlen'
should not only contain the maximum length of the hostname, but also the
maximum length of the username. Now 10 is used as the maximum username
length as a fallback. (`splitlong-safe.pl' uses the same limit.)
The username limit isn't defined in the standard, but 10 is common on
many networks. The odds that something goes wrong here is low, as
1) the fallback limit is only used when the user has not yet joined a
channel
2) the maximum hostname length (63) gives some error margin as the
hostname usually is shorter
`split_line_end' could force lines to be unnecessarily split. This
commit fixes the problem by making sure that the last line isn't shorter
than `split_line_end'.
Add settings `split_line_start' and `split_line_end' analogous to
`splitlong_line_start' and `splitlong_line_end' in `splitlong.pl'. The
prefixes and suffixes are concatenated with a wrapper function to keep
`recode_split' and `strsplit_len' simple.
This commit adds handling of long IRC messages to the core. In contrast
to the `splitlong.pl' plugin, multi-byte encoded and recoded messages
are properly split.
To allow for this, a new function has been added to the server struct:
`split_message'. `split_message' returns a string array with the message
splitted to substrings of a length that the server can handle. If a
protocol module doesn't have any limit, it can simply return a singleton
array with a copy of the message.
The `MSG' chat command now calls `split_message' before `send_message',
and emits `message own_public' / `message own_private' with each
substring, so that the string splitting will be visible in the UI.
`split_message' in the IRC module uses `recode_split' which in turn uses
iconv to properly split multi-byte encoded (and recoded) messages.
This is technically wrong as it then gets used as an IPv4 sockaddr, but it only
needs to be some 0s so this is easier than changing the IPADDR data structure or
adding a new API.
256 colour patch is cleaned up and the remaining cases are made work,
this includes especially Theme support, which was not implemented
before. Changes not related to colours were reverted again, making a
review of the two patches against master easier to follow.
As a byproduct of the Hex-colour code parser, the 24bit colours are
also implemented. Actually using them in the terminal is guarded by a
compile time switch (as well as a run time switch), as it breaks the
existing colour protocol and requires additional storage.
To make a seamless usage, down-conversion is provided for 8 and 16
colours.
Diverging from Tom's approach, the colour protocol is reverted back to
the original one. Unfortunately, the changes required in the Theme
engine will break the API.
For more details, please refer to the patch documentation at either
http://irssi-docs.wikispaces.com/Notes-256-Colour or
https://github.com/shabble/irssi-docs/wiki/Notes-256-Colour
In this path we can't look up ignores again because the print text signal
doesn't know the nick, etc. Instead just show it. The user can use -actcolor %n
or make the hilight more specific if desired.
This results in a more flexible system and is less surprising as it means levels
can be used in the way they normally can in an ignore.
As an example the current approach to NO_ACT provides no way to let HILIGHTS
be shown, with this change /set activity_hide_targets can be recreated with:
/ignore #channel NO_ACT
/ignore #channel -except -regexp -pattern . NO_ACT HILIGHTS
(but obviously this can be configured in many more ways if desired).
This patch implements some 256 colour support for Irssi up from the
previous 16 colours. Initial parsing of the %x/%X format codes is
implemented and the parser accounts in advances the char* for
that.
The colour attributes are widened from 4 to 8 bit. The colour protocol
is changed to a new format. Some pointers to remaining work are
written in the comment in textbuffer.h.
Note that Irssi already does support requesting 256 colours from the
terminal in the original source code, so this part did not have to be
touched.
Further to pull #49 this is the result of an audit of the use of perl
stack macros. There were several cases where PUTBACK was being called
where the stack pointer could be out-of-date.
Also some misc. cleanup where the macros were used needlessly.
PUTBACK was being called even for the error path which didn't use the
stack. Emitting the "script error" signal can involve running Perl code
(Irssi:core::destroy) therefore the stack can be reallocated. This
can result in the perl stack being corrupted because the local stack
pointer is out of date (although as it's use of freed memory the crash
is not always instant).
