Backport #28639 by @denyskon
According to [Debian
docs](https://wiki.debian.org/DebianRepository/UseThirdParty):
> The certificate MUST NOT be placed in /etc/apt/trusted.gpg.d or loaded
by apt-key add.
> ...
> If future updates to the certificate will be managed by an apt/dpkg
package as recommended below, then it SHOULD be downloaded into
/usr/share/keyrings using the same filename that will be provided by the
package. If it will be managed locally , it SHOULD be downloaded into
/etc/apt/keyrings instead.
> ...
> A sources.list entry SHOULD have the signed-by option set.
Co-authored-by: Denys Konovalov <kontakt@denyskon.de>
Backport #28626 by @hakito
Make it clear that this value is just a default value and that every
artifact can have it's own value.
Co-authored-by: Gerd Katzenbeisser <hakito@users.noreply.github.com>
Backport #28587, the only conflict is the test file.
The CORS code has been unmaintained for long time, and the behavior is
not correct.
This PR tries to improve it. The key point is written as comment in
code. And add more tests.
Fix#28515Fix#27642Fix#17098
Backport #28302 by @yp05327
Close#28287
## How to test it in local
convert Makefile L34 into:
```
cd .tmp/upstream-docs && git clean -f && git reset --hard && git fetch origin pull/28302/head:pr28302 && git switch pr28302
```
Co-authored-by: yp05327 <576951401@qq.com>
Backport #28205 by @CodeShakingSheep
In the [docs for email
setup](https://docs.gitea.com/administration/email-setup)
`mailer.IS_TLS_ENABLED` is mentioned which was replaced by
`mailer.PROTOCOL` in release 1.18.0 according to
https://blog.gitea.com/release-of-1.18.0/ . This change wasn't reflected
in the docs for email setup. I just replaced the deprecated mailer
setting.
Co-authored-by: CodeShakingSheep <19874562+CodeShakingSheep@users.noreply.github.com>
Backport #28191 by @yp05327
https://gitea.com/gitea/gitea-docusaurus/actions/runs/661/jobs/0#jobstep-9-39
I noticed that there are many warning logs in building docs.
It is causing 404 in docs.gitea.com now, so we need to fix it.
And there are also some other problems in v1.19 which can not be done in
this PR.
Co-authored-by: yp05327 <576951401@qq.com>
Backport #28160 by @yp05327
Since #27054, Actions are enabled by default. so we should also edit the
document. 😃
ps: I think this should be backport to 1.21.0.
Co-authored-by: yp05327 <576951401@qq.com>
Backport #27946 by @lng2020
As title. Some attachments and file sizes can easily be larger than
these limits
Co-authored-by: Nanguan Lin <70063547+lng2020@users.noreply.github.com>
Backport #27930 by @lng2020
The bug has been fixed for several months in the
`docker/build-push-action`
The fix commit is
[d8823bfaed](d8823bfaed)
as the Gitea Actions Doc mentioned too.
Co-authored-by: Nanguan Lin <70063547+lng2020@users.noreply.github.com>
Backport #27723 by @mpldr
This patchset changes the connection string builder to use net.URL and
the host/port parser to use the stdlib function for splitting host from
port. It also adds a footnote about a potentially required portnumber
for postgres UNIX sockets.
Fixes: #24552
Co-authored-by: Moritz Poldrack <33086936+mpldr@users.noreply.github.com>
Backport #27844 by @nodiscc
This documents running `act-runner` as a systemd service under a
dedicated user account.
Co-authored-by: nodiscc <nodiscc@gmail.com>
Backport #27555 by @wolfogre
It should be OK to increase the default queue length since the default
type is "level".
IMO, the old default length (100) is a little too small. See
https://github.com/go-gitea/gitea/issues/27540#issuecomment-1754269491
IIRC, a larger length could lead to more memory usage only when the type
is "channel," but it's an obscure case. Otherwise, it's just a limit
(for "level" or "redis").
Co-authored-by: Jason Song <i@wolfogre.com>
Backport #27500 by @silverwind
Duplicate headers in a single Markdown document are problemlematic
because the auto-generated links won't be stable. Enable this rule with
no exceptions which is also the default of `markdownlint`. For example:
```md
# A
## Example
# B
## Example
```
Docasaurus will generated `example` and `example-1` links for this. If
the first heading is altered, the link `example` will unexpectedly move
to the second example heading.
Ref: https://github.com/go-gitea/gitea/pull/27461#discussion_r1347987659
Co-authored-by: silverwind <me@silverwind.io>
Backport #27400 by @fantognazza
With this PR we added the possibility to configure the Actions timeouts
values for killing tasks/jobs.
Particularly this enhancement is closely related to the `act_runner`
configuration reported below:
```
# The timeout for a job to be finished.
# Please note that the Gitea instance also has a timeout (3h by default) for the job.
# So the job could be stopped by the Gitea instance if it's timeout is shorter than this.
timeout: 3h
```
---
Setting the corresponding key in the INI configuration file, it is
possible to let jobs run for more than 3 hours.
Signed-off-by: Francesco Antognazza <francesco.antognazza@gmail.com>
Backport #27291 by @silverwind
Previously, the production build never output sourcemaps. Now we emit
one file for `index.js` because it is the most likely one where we need
to be able to better debug reported issues like
https://github.com/go-gitea/gitea/issues/27213. This will currently
increase the binary size of gitea by around 700kB which is what the
gzipped source map file has.
Also, I fixed the CSS sourcemap generation which was broken since the
introduction of lightningcss.
The chinese docs are machine-translated, please correct accordingly.
Co-authored-by: silverwind <me@silverwind.io>
WIP because:
- [x] Some calls set a `content-type` but send no body, can likely
remove the header
- [x] Need to check whether `charset=utf-8` has any significance on the
webauthn calls, I assume not as it is the default for json content.
- [x] Maybe `no-restricted-globals` is better for eslint, but will
require a lot of duplication in the yaml or moving eslint config to a
`.js` extension.
- [x] Maybe export `request` as `fetch`, shadowing the global.
Closes#26329
This PR adds the ability to ignore revisions specified in the
`.git-blame-ignore-revs` file in the root of the repository.
The banner is displayed in this case. I intentionally did not add a UI
way to bypass the ignore file (same behaviour as Github) but you can add
`?bypass-blame-ignore=true` to the url manually.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Hello,
The current package guide for cargo gives you only the git index, with
the HTTP Index stabilized being used as default for crates.io and being
better for most use-cases.
However, it's not documented that gitea supports the sparse spec, and it
does not require the _crates-index git repo for the sparse api.
I personally think we should push users to use the sparse instead of the
git repository. (Even let users disable crates-index repos if they only
want to use sparse)
If the AppURL(ROOT_URL) is an HTTPS URL, then the COOKIE_SECURE's
default value should be true.
And, if a user visits an "http" site with "https" AppURL, they won't be
able to login, and they should have been warned. The only problem is
that the "language" can't be set either in such case, while I think it
is not a serious problem, and it could be fixed easily if needed.
1. Introduce lightweight `fetch` wrapper functions that automatically
sets csfr token, content-type and use it in `RepoActionView.vue`.
2. Fix a specific issue on `RepoActionView.vue` where a fetch network
error is shortly visible during page reload sometimes. It can be
reproduced by F5-in in quick succession on the actions view page and was
also producing a red error box on the page.
Once approved, we can replace all current `fetch` uses in UI with this
in another PR.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
This feature was removed by #22219 to avoid possible CSRF attack.
This PR takes reverseproxy auth for API back but with default disabled.
To prevent possbile CSRF attack, the responsibility will be the
reverseproxy but not Gitea itself.
For those want to enable this `ENABLE_REVERSE_PROXY_AUTHENTICATION_API`,
they should know what they are doing.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Currently, Artifact does not have an expiration and automatic cleanup
mechanism, and this feature needs to be added. It contains the following
key points:
- [x] add global artifact retention days option in config file. Default
value is 90 days.
- [x] add cron task to clean up expired artifacts. It should run once a
day.
- [x] support custom retention period from `retention-days: 5` in
`upload-artifact@v3`.
- [x] artifacts link in actions view should be non-clickable text when
expired.
