After the recent ecmascript_get_interpreter change, I got an assertion
failure in render_document, which calls ecmascript_reset_state and
then asserts that it has set vs->ecmascript != NULL.
ecmascript_reset_state cannot guarantee that because there might not
even be enough free memory for mem_calloc(1, sizeof(struct
ecmascript_interpreter). So, replace the assertion in render_document
with error handling, and likewise in call_onsubmit_and_submit.
In start_document_refresh, use register_bottom_half instead of
install_timer if the timeout is 0 because install_timer asserts that it is
given a delay greater than 0.
Add a test case, test/refresh-0timeout.html. Note that
document.browse.minimum_refresh_time must be set to 0 to reproduce the
assertion failure.
C99 6.7.4p3 and 6.7.4p6 set some constraints on what can be done in
inline functions and how they can be declared. In particular, any
function declared inline must also be defined in the same translation
unit. To comply with that, remove inline specifiers from function
declarations in header files when the functions are not also defined
in those header files.
Sun Studio 11 on Solaris 9 is stricter than C99 and does not allow
references to static identifiers in extern inline functions. Make the
configure script detect this and define NONSTATIC_INLINE accordingly
in config.h. Then use that in the definitions of all non-static
inline functions.
Document the restrictions and this scheme in doc/hacking.txt.
Documentation strings of most options used to contain a "\n" at the
end of each source line. When the option manager displayed these
strings, it treated each "\n" as a hard newline. On 80x24 terminals
however, the option description window has only 60 columes available
for the text (with the default setup.h), and the hard newlines were
further apart, so the option manager wrapped the text a second time,
resulting in rather ugly output where long lones are interleaved with
short ones. This could also cause the text to take up too much
vertical space and not fit in the window.
Replace most of those hard newlines with spaces so that the option
manager (or perhaps BFU) will take care of the wrapping. At the same
time, rewrap the strings in source code so that the source lines are
at most 79 columns wide.
In some options though, there is a list of possible values and their
meanings. In those lists, if the description of one value does not
fit in one line, then continuation lines should be indented. The
option manager and BFU are not currently able to do that. So, keep
the hard newlines in those lists, but rewrap them to 60 columns so
that they are less likely to require further wrapping at runtime.
These functions now expect or return strings in UTF-8:
delete_folder_by_name (sneak in a const, too), bookmark_terminal_tabs,
open_bookmark_folder, and get_auto_save_bookmark_foldername_utf8 (new
function).
This simplifies the callers a little and may help implement
simultaneous support for different charsets on different terminals
of the same type (bug 1064).
look_for_link() used to return 0 both when it found the closing </MAP>
tag, and when it hit the end of the file. In the first case, it also
added *menu to the memory_list; in the second case, it did not. The
caller get_image_map() supposedly distinguished between these cases by
checking whether pos >= eof, and freed *menu separately if so.
However, if the </MAP> was at the very end of the HTML file, so that
not even a newline followed it, then look_for_link() left pos == eof
even though it had found the </MAP> and added *menu to the memory_list.
This made get_image_map() misinterpret the result and mem_free(*menu)
even though *menu had already been freed as part of the memory_list;
thus the crash.
To fix this, make look_for_link() return -1 instead of 0 if it hits
EOF without finding the </MAP>. Then make get_image_map() check the
return value instead of comparing pos to eof. And add a test case,
although not an automated one.
Alternatively, look_for_link() could have been changed to decrement
pos between finding the </MAP> and returning 0. Then, the pos >= eof
comparison in get_image_map() would have been false. That scheme
would however have been a bit more difficult to understand and
maintain, I think.
Reported by Paul B. Mahol.
(cherry picked from commit a2404407ce)
A style-sheet containing the string "url( )" with 1 or more characters of
whitespace in between the parentheses triggered an assertion failure in
scan_css_token.
scan_css_token would find the left parenthesis, find the right parenthesis,
and then scan forwards from the left parenthesis for a non-whitespace
character to find the start of the URL and backwards from the right
parenthesis to find the end of the URL. If there were whitespace and
nothing else, the start would be past the end, the routine would compute a
negative length for the URL, and then the routine would trigger an
assertion failure. Now the routine simply enforces a lower bound of length
0 for the URL.
This patch fixes an issue whereby a newline character appearing within
a hidden input field is incorrectly reinterpreted as a space character.
The patch handles almost all cases, and includes a test case.
15/18 tests pass, but the remainder currently fail due to the fact
that ELinks does not currently support textarea scripting.
On 2008-09-05, it was reported to elinks-dev that ELinks hits an
internal error (bad alloc_header) when given a specific HTML file.
On 2008-09-09, out-of-range values of document->comb_x and
document->comb_y were noted as the cause of memory corruption.
Update those variables when splitting, aligning, or justifying a line.
Add many assertions to detect the bug if it occurs again.
Previously, the character at (document.comb_x, document.comb_y) was
accessed via the POS macro, which adds part.box.x and part.box.y to
the coordinates. However, if document.comb and document.y are set
at the end of one part and read at the beginning of another, then
the struct screen_char used by the original part should be updated,
even though the new part has a different box. Change comb_{x,y} to
be relative to the document, rather than to the box of a single part.
cache_entry.id => cache_entry.cache_id
document.id => document.cache_id
ecmascript_interpreter.onload_snippets_owner => .onload_snippets_cache_id
This is a combination of:
commit 232c07aa7f
bug 1009: id variables renamed, added document_id to the document.
commit 6007043458bf8f14abfc18b9db60785bdc0279f6
Revert addition of document.document_id
Replace almost all uses of enum connection_state with struct
connection_status. This removes the assumption that errno values used
by the system are between 0 and 100000. The GNU Hurd uses values like
ENOENT = 0x40000002 and EMIG_SERVER_DIED = -308.
This commit is derived from my attachments 450 and 467 to bug 1013.
In document.forms, each struct form has form_num and form_end members
that reserve a subrange of [0, INT_MAX] to that form. Previously,
multiple forms in the list could have form_end == INT_MAX and thus
overlap each other. Prevent that by adjusting form_end of each form
newly added to the list.
Revert 438f039bda,
"check_html_form_hierarchy: Old code was buggy.", which made
check_html_form_hierarchy attach controls to the wrong forms.
Instead, construct the dummy form ("for those Flying Dutchmans") at
form_num == 0 always before adding any real forms to the list.
This prevents the assertion failure by ensuring that every possible
form_control.position is covered by some form, if there are any forms.
Add a function assert_forms_list_ok, which checks that the set of
forms actually covers the [0, INT_MAX] range without overlapping,
as intended. Call that from check_html_form_hierarchy to detect
any corruption.
I have tested this code (before any cherry-picking) with:
- bug 613 attachment 210: didn't crash
- bug 714 attachment 471: didn't crash
- bug 961 attachment 382: didn't crash
- bug 698 attachment 239: all the submit buttons showed the right URLs
- bug 698 attachment 470: the submit button showed the right URL
(cherry picked from commit 386a5d517b)
Anything that frees or reallocates struct form_state must now call the
new functions ecmascript_detach_form_state or ecmascript_moved_form_state.
These functions should then clear out any dangling pointers, but that has
not yet been implemented.
In document.forms, each struct form has form_num and form_end members
that reserve a subrange of [0, INT_MAX] to that form. Previously,
multiple forms in the list could have form_end == INT_MAX and thus
overlap each other. Prevent that by adjusting form_end of each form
newly added to the list.
Revert 438f039bda,
"check_html_form_hierarchy: Old code was buggy.", which made
check_html_form_hierarchy attach controls to the wrong forms.
Instead, construct the dummy form ("for those Flying Dutchmans") at
form_num == 0 always before adding any real forms to the list.
This prevents the assertion failure by ensuring that every possible
form_control.position is covered by some form, if there are any forms.
Add a function assert_forms_list_ok, which checks that the set of
forms actually covers the [0, INT_MAX] range without overlapping,
as intended. Call that from check_html_form_hierarchy to detect
any corruption.
I have tested this code (before any cherry-picking) with:
- bug 613 attachment 210: didn't crash
- bug 714 attachment 471: didn't crash
- bug 961 attachment 382: didn't crash
- bug 698 attachment 239: all the submit buttons showed the right URLs
- bug 698 attachment 470: the submit button showed the right URL
Conflicts:
NEWS
configure.in
The following files also conflicted, but they had not been manually
edited in the elinks-0.12 branch after the previous merge, so I just
kept the 0.13.GIT versions:
doc/man/man1/elinks.1.in
doc/man/man5/elinks.conf.5
doc/man/man5/elinkskeys.5
po/fr.po
po/pl.po
Do not retain changed values in form fields when the user reloads. Doing
so can be confusing or even cause data-loss when new default values are
specified in the updated document. For example, when editing an article on
Wikipedia, one loads the edit page for the article, makes and submits
changes, goes back to the edit page to make further modifications, and
reloads to get the new article text. Before this change, reloading the
edit page would not update the textarea on the page with the new article
source, which can lead one (and has led me) to make changes to the original
version of the article by accident.
This fixes bug 620.
(cherry picked from commit 9e1e94bee0)
Do not retain changed values in form fields when the user reloads. Doing
so can be confusing or even cause data-loss when new default values are
specified in the updated document. For example, when editing an article on
Wikipedia, one loads the edit page for the article, makes and submits
changes, goes back to the edit page to make further modifications, and
reloads to get the new article text. Before this change, reloading the
edit page would not update the textarea on the page with the new article
source, which can lead one (and has led me) to make changes to the original
version of the article by accident.
This fixes bug 620.
Handle <script> blocks even when they are contained by blocks with
"display: none" set.
This commit fixes the second problem that Kalle points out in comment 5
to bug 963.
When this option is enabled, elements should be rendered even when the CSS
display attribute is "none". Before this commit, the reverse was true:
when the option was enabled, such elements were _not_ rendered.
I am not changing the default, which is enabled, meaning that by default,
ELinks renders elements regardless of "display: none". Pasky advocates
that this remain the default until ELinks's CSS support improves.
This commit fixes the first problem that Kalle points out in comment 5 to
bug 963.
cached->id => cached->cache_id
document->id => document->cache_id
onload_snippets_owner => onload_snippets_document_id
Added the distinct document->document_id.
Always reset ecmascript when a document changes for example a next chunk
of it is loaded.
The previous code displayed the wrong attributes if the combining
characters were at the end of an HTML link. For example:
<a href="#">trickỹ</a> more text <a href="#">second link</a>
(The characters in the first A element are "tricky" and U+0303
COMBINING TILDE.)
Here, when the cursor was not at the first link, ELinks displayed
the y-with-tilde cell as if it were not part of the link.
This happened because ELinks had already changed schar->attr
before set_line saw the space character after the link and
flushed document->combi[].
Combining characters requires a UTF-8 locale.
It slows down rendering. There is still the unresolved issue with
combining characters at the end of a document.
This patch wasn't heavilly tested. Especially a "garbage" input may cause
unpredictable results.
Because ELinks's CSS support is still so incomplete, some documents still render better if "display: none" is not honoured. Therefore, it is now honoured, unless document.css.ignore_display_none = 0, which is the default.
We have a while loop that checks token && token->type != '}' followed by an if statement that checks token && token->type == }. If the while loop exits, that either token is false or token->type == '}'; therefore, the if statement need only check token.
This patch adds support for:
- option document.css.media
- CSS @import "foo.css" tty;
- CSS @media tty { ... }
- HTML <link rel="stylesheet" media="tty">
- HTML <style media="tty">
This patch is attachments 395 and 396 from bugzilla.elinks.cz, which
are based on attachment 388 from bugzilla.elinks.cz. This new
version of the patch fixes conflicts with recent 0.13.GIT changes,
marks Doxygen commands with at-signs rather than backslashes, and
adds a few comments.
This necessitates that non-pairable elements be briefly pushed on the stack, so that get_css_selector_for_element sees them, and then popped.
It would be possible to push them only when CONFIG_CSS is defined, as they are otherwise not needed (as evidenced by the fact that we've gone so long without bothering to push them). However, the performance hit should be small, the necessary #ifdef/#endif wrappers would be pretty ugly, and ideally, the CSS code will someday be in such a state that it can be considered an integral feature.
Instead, convert the element pointers inside the comparison functions.
The last argument of qsort() is supposed to be of type
int (*)(const void *, const void *). Previously, comp_links() was
defined to take struct link * instead of const void *, and the type
mismatch was silenced by casting the function pointer to void *.
This was in principle not portable because:
(1) The different pointer types may have different representations.
In a word-oriented machine, the const void * might include a byte
selector while the struct link * might not.
(2) Casting a function pointer to a data pointer can lose bits in some
memory models. Apparently this does not occur in POSIX-conforming
systems though, as dlsym() would fail if it did.
This commit also fixes hits_cmp() and compare_dir_entries(), which
had similar problems. However, I'm leaving alias_compare() in
src/intl/gettext/localealias.c unchanged for now, so as not to diverge
from the GNU version.
I also checked the bsearch() calls but they were all okay, apart from
one that used the alias_compare() mentioned above.
start_document_refreshes() performs the NULL-pointer checks that
previously all callers to start_document_refresh() must perform
and then calls start_document_refresh().
Before, *_html_parser_state() operated with struct html_element *. Now, it is
transparent for the renderer (just void *), so that DOM won't have to provide
this struct but will be able to use something internal.
Backported from master.
Previously, process_head immediately returned if there was no refresh, never giving the cache-control check further down a chance to run.
Also add new tests:
nocache.html
refresh+nocache.html
Simply search for 'url' marker ignoring anything
before it.
ELinks is now able to follow incorrectly written
meta refresh content attribute with missing ; before
url= parameter.
As an example, try http://akkada.tivi.net.pl/
Simply search for 'url' marker ignoring anything
before it.
ELinks is now able to follow incorrectly written
meta refresh content attribute with missing ; before
url= parameter.
As an example, try http://akkada.tivi.net.pl/
start_document_refreshes performs the NULL-pointer checks that previously all callers to start_document_refresh must perform and then calls start_document_refresh.
Previously, process_head immediately returned if there was no refresh, never giving the cache-control check further down a chance to run.
Also add new tests:
nocache.html
refresh+nocache.html
After commit b66d2bec67 'document: Unify text style -> screen attribute handling', the case statements for CSS_PT_FONT_WEIGHT, CSS_PT_FONT_STYLE, and CSS_PT_TEXT_DECORATION all have common code and therefore collapse nicely.
Pass the session with some get_opt_* calls. These are the low-hanging fruit. Some places will be difficult because we don't have the session or for other reasons.
change_hook_active_link: pass update_cache_document_options @ses.
Now when changing the global settings, it will not simply copy the new values for the global settings to the document-options cache, but also check session-specific settings. This doesn't really matter yet, since the options in question can't be set on a per-session basis, but is in preparation for future changes.
Before, *_html_parser_state() operated with struct html_element *. Now, it is
transparent for the renderer (just void *), so that DOM won't have to provide
this struct but will be able to use something internal.
...as struct text_style. This way it might be possible later to
add other default formatting attributes by CSS and it allows
quite a code simplification in the DOM renderer.
Currently, all DOM, HTML and plain renderers had their own routine for
conversion from text style to screen attribute. This moves text_style and
text_style_format from html/parser.h to renderer.h and introduces new generic
routine get_screen_chracter_template() that is used by all the specific
rendering engines.
Now, CSS is initialized separately for each of the renderers, so that
also RSS doesn't just choose styles of random DOM node types.
init_template_by_style() is introduced as the common backend for
loading CSS properties.
This fixes ELinks crashing on this with terminal width e.g. 103:
<p align="justify">
xxxx xxxx xxxx xxxxx xxxxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx
xxxxx xxxx xxxxxxx xxx xxxxxxx xxx xxxx xxxx xxxx xx xxxx x xxx xxxx
xxxx xx xxxx xxxx xxxx xxx—xxx xxxx xx—xxx xxxx<em> </em>x
xxxx </p>
This test was removed for an unknown reason in commit
b1cc717789.
Discovered together with Miciah.
All the needed memory has been allocated before the loop so we can use
copy_screen_chars() directly. This avoids the assertion failure in
copy_chars() for width==0 and should be a bit faster too. According
to ISO/IEC 9899:1999 7.21.1p2, memcpy() doesn't copy anything if n==0
(but the pointers must be valid).
(original 'git cherry-pick' arguments: cherry-pick bug968-att394)
There were conflicts in src/document/css/ because 0.12.GIT switched
to LIST_OF(struct css_selector) and 0.13.GIT switched to struct
css_selector_set. Resolved by using LIST_OF(struct css_selector)
inside struct css_selector_set.
Fix warnings:
dom/stack.h:70: Warning: explicit link request to 'pop_dom_node' could not be resolved
dom/stack.h:71: Warning: explicit link request to 'pop_dom_nodes' could not be resolved
dom/stack.h:71: Warning: explicit link request to 'pop_dom_state' could not be resolved
dom/stack.h:115: Warning: explicit link request to 'done_dom_node' could not be resolved
Use @returns instead of \return in src/document/css/parser.c,
and other such things.
When skipping "@media print { #foo {bar: baz} pre {white-space: normal} }",
the previous code would look for the first "{" and then the first "}", and
fail to skip the "pre" rule. Seen at support.microsoft.com.
I originally posted this change as part of attachment 383 to bug 722.
Use it for the actual I/O only. Previously, defining CONFIG_UTF8 and
enabling UTF-8 used to force many strings to the UTF-8 charset
regardless of the terminal charset option. Now, those strings always
follow the terminal charset. This fixes bug 914 which was caused
because _() returned strings in the terminal charset and functions
then assumed they were in UTF-8. This reduction in the effects of
UTF-8 I/O may also simplify future testing.
Because the renderer no longer does that.
The comment "We don't cope well with entities here" may now be
obsolete but I'm not sure about that so I'm leaving it in.
options->cp is still used for this in seven places where html_context
is not easily available. Those should eventually be corrected too,
but I'm checking this change in already because it's better than what
we had before.
Previously, html_special_form_control converted
form_control.default_value to the terminal charset, and init_form_state
then copied the value to form_state.value. However, when CONFIG_UTF8
is defined and UTF-8 I/O is enabled, form_state.value is supposed to
be in UTF-8, rather than in the terminal charset.
This mismatch could not be conveniently fixed in
html_special_form_control because that does not know which terminal is
being used and whether UTF-8 I/O is enabled there. Also, constructing
a conversion table from the document charset to form_state.value could
have ruined renderer_context.convert_table, because src/intl/charsets.c
does not support multiple concurrent conversion tables.
So instead, we now keep form_control.default_value in the document
charset, and convert it in the viewer each time it is needed. Because
the result of the conversion is kept in form_state.value between
incremental renderings, this shouldn't even slow things down too much.
I am not implementing the proper charset conversions for the DOM
defaultValue property yet, because the current code doesn't have
them for other string properties either, and bug 805 is already open
for that.
This does not yet fix bug 947 for the case where the document is UTF-8
and the terminal is ISO-8859-1. That will require changing charsets.c
too, it seems.
trim_chars was called only in debug mode and the results of the get_attr_val
for value=" something " in debug mode differ from normal and fastmem mode.
[ From commit c4500039b2 on the witekfl
branch. --KON ]
straconcat reads the args with va_arg(ap, const unsigned char *),
and the NULL macro may have the wrong type (e.g. int).
Many places pass string literals of type char * to straconcat. This
is in principle also a violation, but I'm ignoring it for now because
if it becomes a problem with some C implementation, then so will the
use of unsigned char * with printf "%s", which is so widespread in
ELinks that I'm not going to try fixing it now.
When tables were rendered first time html_format_part was called with
document==NULL. <meta http-equiv=Refresh.../> was inside a table,
so document was NULL. Second time the table knew its dimensions
and document was not NULL.
I do not fully understand this code, but I am sure skipping characters
like this is a bug, and correcting it seems to fix bug 826 (too small
table for double-cell characters). I don't see any similar bugs in
other parts of set_hline.
The patch is from bug 826, comment 4, attachment 308. The warning
there about unicode_to_cell(UCS_NO_CHAR) still applies but this patch
does not make the situation worse. I have logged a separate bug 901
about those calls.
This allows code to use document->cached instead of
find_in_cache(document->uri), thereby increasing the likelihood
of getting the correct cache entry.
This should fix Bug 756 - "assertion (cached)->object.refcount >= 0 failed"
after HTTP proxy was changed.
Patches for this were written by me and then later by Jonas.
This commit combines our independent implementations.
The quote_level was decremented unconditionally and could become negative
resulting in a negative index after applying "modulus 2". Reproducable
with an HTML file contianing "</q>".
Reported by paakku.
Recognize all of 
 
 with any number of leading
zeroes. (Previously only and 
 were supported.) All of
these are case insensitive.
Treat each CR+LF combination ( ) as a single newline.
The configure script no longer recognizes "CONFIG_UTF_8=yes" lines
in custom features.conf files. They will have to be changed to
"CONFIG_UTF8=yes". This incompatibility was deemed acceptable
because no released version of ELinks supports CONFIG_UTF_8.
The --enable-utf-8 option was not renamed.
Suggested by Miciah on #elinks.
What was renamed:
add_utf_8 => add_utf8
cp2utf_8 => cp2utf8
encode_utf_8 => encode_utf8
get_translation_table_to_utf_8 => get_translation_table_to_utf8
goto invalid_utf_8_start_byte => goto invalid_utf8_start_byte
goto utf_8 => goto utf8
goto utf_8_select => goto utf8_select
terminal_interlink.utf_8 => terminal_interlink.utf8
utf_8_to_unicode => utf8_to_unicode
What was not renamed:
terminal._template_.utf_8_io option, TERM_OPT_UTF_8_IO
Compatibility with existing elinks.conf files would require an alias.
--enable-utf-8
Because the name of the charset is UTF-8, --enable-utf-8 looks better
than --enable-utf8.
CONFIG_UTF_8
Will be renamed in a later commit.
Unicode/utf_8.cp, table_utf_8, aliases_utf_8
Will be renamed in a later commit.
Surrogates are now treated the same way as out-of-range characters
like U+110000; if a link has such an access key, then the ECMAScript
accessKey property cannot be read. It seems currently impossible to
set such an access key though, because accesskey_string_to_unicode()
doesn't support multibyte characters yet.
Drop some code for superscript and subscript handling that was deleted
in commit 65016cdca4, then added back
with the UTF-8 merge in commit 2a6125e3d0,
and then disabled in commit 1b653b9765.
Commit 3ce3f01f30 introduced a bug whereby
if a tab set the current position in the line to or greater than the number
of bytes remaining in the source, the line was split after the tab.
Its return value is now an enum that lets callers know whether an
error occurred. However, this commit changes the callers only
minimally, so they do not yet check the return value.
In html_subscript, html_subscript_close, html_superscript, html_quote, and
html_quote_close, use put_chrs instead of html_context->put_chars_f.
Element handlers should use put_chrs so that it can correctly handle
whitespace and stuff.
Instead of saving the old link colours when selecting a link and using that
to restore them when unselecting it, just copy the data from the document.
- Eliminate struct link_bg and the .link_bg and .link_bg_n members
of struct document_view.
- Eliminate the free_link routine and don't call it from draw_doc,
clear_link, or detach_formatted.
- Add a .old_current_link member to struct view_state and initialise it in
init_vs.
- Don't save link_bg in draw_current_link.
- Rewrite clear_link to use the document data instead of link_bg.
- Modify init_link_drawing not to allocate ling_bg and to return a pointer
to a static variable for the template character.
Introduce html_subscript_close callback. Draw opening and closing brackets
and carets for subscript and superscript text directly in the element
handlers rather than performing weirdness in the renderer. This both
improves readability and fixes bug 284, misplaced brackets with subscripts.
Add close callbacks html_html_close, html_style_close, and
html_xmp_close. end_element now calls the element close callback instead
of performing special handling for certain tags.
Note: there are ugly bug (feature?) - when there isn't enought room for
whole double-width char two double-chars are displayed. Can be seen on
table with double-width chars reduced as much as possible.
Don't replace UTF-8 bytes with '*'. Probably there is need to do better
check what will be displayed.
Also get_current_link_title is no longer pretty and trivial. (o:
This patch modifies ELinks wrapping behavior slightly.
* The wrap command now toggles line wrapping in HTML mode, as well as
text mode. Note that when the HTML view of a page is wrapped, its
source view is unwrapped, and vice versa.
* Tabs in text-mode lines are now handled correctly.
* Wrapping a line that reaches exactly to the edge of the screen will
no longer produce a blank line in text mode.
* Text within extra-wide table cells is now wrapped to less than the
screen width, to eliminate sideways scrolling.
The last point is only enabled by setting TABLE_LINE_PADDING to a
non-negative number, in the src/setup.h header file, because it is a
significant change of behavior from previous versions.
Revert commit 2f0490cb04
('Eval embedded scripts at once') and follow-up commit
997f61bb32 ('Use document_view instead of
view_state. It is safer probably') because the change causes crashes on
numerous pages and just looks wrong.
Fixes problems with host or protocol parts not being lowercased. This
triggers an assertion failure when trying to download such links. Reported
by lindi-.
It add support for normalizing a DOM document in various ways, such as
removing comments, converting CDATA section nodes to text nodes, cleanup
whitespace, etc.
Use it in the RSS renderer to sanitize the text to be rendered.
This changes the init target to be idempotent: most importantly it will now
never overwrite a Makefile if it exists. Additionally 'make init' will
generate the .vimrc files. Yay, no more stupid 'added fairies' commits! ;)
