Recognize all of 
 
 with any number of leading
zeroes. (Previously only and 
 were supported.) All of
these are case insensitive.
Treat each CR+LF combination ( ) as a single newline.
Fix bug 834 (various gzip-encoded documents were being truncated),
which I introduced with commit e441361f2c.
Thanks to Witek for reporting the bug, Kalle for determining the
problematic commit, and Jonas for letting me know about the bug report(!).
... mainly bittorrent:// and bittorrent://x
The BitTorrent URL is supposed to contain an embedded URL pointing to a
metainfo file. If this is not the case a "custom" error message will be
shown. Also fixes calling of free_list() on an uninitialized list.
Closes bug 729.
A simple "update" of Hugo Haas' patch posted for bug 107. This of course
also affects the (undocumented?) feature of file:// refering to the local
directory in that directories named "localhost" can no longer be displayed
using file://localhost. Nobody should do that anyway.
It will grab at the first fragment of the cache entry and try to detect the
content-type by looking for valid HTML. It is very stupid for now, simply
searching for "<html>", which may be bogus in certain circumstances. And I
am not sure if this is better left out and up to the scripting backends,
e.g. SMJS can now modify the cache entry.
A feable fix for bug 396.
The problem is that if you run elinks in xterm with the default white
background, it will be totally unreadable if transparency is turned
on. We should default to usability in all common environments, eyecandy
lovers can do the extra setup for their specific one.
It also makes the description note that elinks still assumes the
background is black.
This is necessary when using a POSIX-compliant stdio implementation, which
will set the FILE error flag when input from the pipe is exhausted, causing
all subsequent reads to fail.
Adjust the size of to_read for the initial read instead of setting the init
flag and using that later to check whether to read a smaller amount than
the value in to_read. This also affects the realloc call on the initial
read, which was allocating more memory than necessary (altho this
discrepency would be corrected with the realloc for the next read).
Otherwise if the page installs multiple timers the old one would live
on unreferenced and possibly (likely) trigger after the document's death
and everything would go to hell.
/usr/bin/ld: warning multiple definitions of symbol _locale_charset
lib.o definition of _locale_charset in section (__TEXT,__text)
/usr/lib/libiconv.dylib(localcharset.o) definition of _locale_charset
Revert commit c9ce4260e5,
which made "elinks -remote http://elinks.cz/" fail with an error
"ELinks: Cannot parse option -remote: Remote method not supported"
even though doc/remote.txt says it should open the URL in a new tab.
The previous version assumed the first non-digit after the CSI was the
Final Byte, for example the first semicolon in the "\E[?1;2c" report.
It then treated all subsequent bytes as typed characters.
According to Standard ECMA-48 (Fifth Edition - June 1991), there may
be any number of Parameter Bytes in the range 0x30 to 0x3F, and then
any number of Intermediate Bytes in the range 0x20 to 0x2F, between
the CSI and the Final Byte.
This version still does not support control sequences longer than
ITRM_IN_QUEUE_SIZE bytes.
Added document.cache.interval option. When time elapsed since previous access
to the document is less than interval then the document is taken from
the cache. Otherwise the request with filled "If-Modified-Since" and/or
"If-None-Match" header field is sent. By default interval is set to 10 minutes.
This requires the correct time to be set on your machine.
The current rules are:
term.utf8
CONFIG_UTF8 UTF-8 I/O widget_data.cdata
----------- --------- ------------------
undefined disabled charset of the terminal
undefined enabled charset of the terminal
defined disabled charset of the terminal (*)
defined enabled always UTF-8
(*) kbd_field was incorrectly assuming UTF-8 in this case.
This reverts the following commits:
- 86ed79deaf
Use wcwidth if available and applicable.
- 304f5fa1ea
comment fix (__STDC_ISO_10646__, not __STDC_ISO_10646)
- part of 71eebf1cc7
Compensate for glibc not defining wcwidth() when _XOPEN_SOURCE is not set
And adds a lengthy comment about LC_CTYPE problems.
Explicitly compare the value that is returned by the widget handler
against EVENT_NOT_PROCESSED rather than relying on the fact that
EVENT_NOT_PROCESSED is equal to 1.
ffeedbdc5045a6a5db2bc75ecaab56bfe46c80ea
The secure file saving code plays some shenanigans with the umask.
Previously, the code could fail to restore the old umask when certain libc
calls failed: malloc, mkstemp, fdopen, and fopen. This resulted in
unrelated code creating files with the wrong umode. Specifically, the
download code's automatic directory creation was creating directories
without the execute permission bit.
Thanks to Quiznos for reporting and helping to track the problem down.
To reproduce:
- Start ELinks.
- Enable the ui.tabs.wraparound option.
- Press t to open a second tab.
- Go to http://elinks.cz/ in the second tab.
- Press 3< to step three tabs to the left.
In the statement "tab = tabs + tab % tabs;", tab == -2 and tabs == 2.
So tab % tabs == 0 and tab becomes 2, which is out of range.
The new version calls get_opt_bool even if the tab parameter is already in
range, but the cost should be negligible compared to the redraw_terminal()
call that follows.
Previously, each mapping between a codepage byte and a Unicode
character was stored as a struct table_entry, which listed both the
byte and the character. This representation may be optimal for sparse
mappings, but codepages map almost every possible byte to a character,
so it is more efficient to just have an array that lists the Unicode
character corresponding to each byte from 0x80 to 0xFF. The bytes are
not stored but rather implied by the array index. The tcvn5712 and
viscii codepages have a total of four mappings that do not fit in the
arrays, so we still use struct table_entry for those.
This change also makes cp2u() operate in O(1) time and may speed up
other functions as well.
The "sed | while read" concoction in Unicode/gen-cp looks rather
unhealthy. It would probably be faster and more readable if rewritten
in Perl, but IMO that goes for the previous version as well, so I
suppose whoever wrote it had a reason not to use Perl here.
Before:
text data bss dec hex filename
38948 28528 3311 70787 11483 src/intl/charsets.o
500096 85568 82112 667776 a3080 src/elinks
After:
text data bss dec hex filename
31558 28528 3311 63397 f7a5 src/intl/charsets.o
492878 85568 82112 660558 a144e src/elinks
So the text section shrank by 7390 bytes.
Measured on i686-pc-linux-gnu with: --disable-xbel --disable-nls
--disable-cookies --disable-formhist --disable-globhist
--disable-mailcap --disable-mimetypes --disable-smb --disable-mouse
--disable-sysmouse --disable-leds --disable-marks --disable-css
--enable-small --enable-utf-8 --without-gpm --without-bzlib
--without-idn --without-spidermonkey --without-lua --without-gnutls
--without-openssl CFLAGS="-Os -ggdb -Wall"
Before:
text data bss dec hex filename
25726 62992 3343 92061 1679d src/intl/charsets.o
653856 120020 82144 856020 d0fd4 src/elinks
After:
text data bss dec hex filename
60190 28528 3311 92029 1677d src/intl/charsets.o
688320 85556 82112 855988 d0fb4 src/elinks
So 34464 bytes were moved from the data section to the text section
and should be more likely to get shared between ELinks processes.
Measured on i686-pc-linux-gnu with: --disable-xbel --disable-nls
--disable-cookies --disable-formhist --disable-globhist
--disable-mailcap --disable-mimetypes --disable-smb --disable-mouse
--disable-sysmouse --disable-leds --disable-marks --disable-css
--enable-small --enable-utf-8 --without-gpm --without-bzlib
--without-idn --without-spidermonkey --without-lua --without-gnutls
--without-openssl CFLAGS="-O2 -ggdb -Wall"
UCS_NO_CHAR here means the input was too short. Because the strings
generally come from the source code or from PO files, they should not
end in the middle of a character. However, the whole character may be
missing if the string is empty. So select_button_by_key() now checks
for that case separately.
UCS_NO_CHAR must not be passed to unicode_fold_label_case() because
the result is undefined.
The configure script no longer recognizes "CONFIG_UTF_8=yes" lines
in custom features.conf files. They will have to be changed to
"CONFIG_UTF8=yes". This incompatibility was deemed acceptable
because no released version of ELinks supports CONFIG_UTF_8.
The --enable-utf-8 option was not renamed.
Suggested by Miciah on #elinks.
What was renamed:
add_utf_8 => add_utf8
cp2utf_8 => cp2utf8
encode_utf_8 => encode_utf8
get_translation_table_to_utf_8 => get_translation_table_to_utf8
goto invalid_utf_8_start_byte => goto invalid_utf8_start_byte
goto utf_8 => goto utf8
goto utf_8_select => goto utf8_select
terminal_interlink.utf_8 => terminal_interlink.utf8
utf_8_to_unicode => utf8_to_unicode
What was not renamed:
terminal._template_.utf_8_io option, TERM_OPT_UTF_8_IO
Compatibility with existing elinks.conf files would require an alias.
--enable-utf-8
Because the name of the charset is UTF-8, --enable-utf-8 looks better
than --enable-utf8.
CONFIG_UTF_8
Will be renamed in a later commit.
Unicode/utf_8.cp, table_utf_8, aliases_utf_8
Will be renamed in a later commit.
Previously, the window sizes computed for xterm were a few pixels off,
and this could result in too few character cells being displayed.
This new version tries to read the window size increment from the
WM_NORMAL_HINTS property set by xterm, and base the computations on
that.
