The primary motivation for this change is that the disclaimer now
refers to the author whereas it used to refer to the copyright holder.
The ISC license is the preferred license for new code in OpenBSD.
http://www.openbsd.org/policy.htmlhttp://www.openbsd.org/cgi-bin/cvsweb/src/share/misc/license.template?rev=1.2
I am also removing the reference to "the same terms as Perl itself"
because those terms are not being distributed with ELinks. Anyway,
Perl 5 is dual licensed under the Artistic License and the GNU General
Public License (version 1 or later), and the ISC license seems GPL
compatible to me.
Without this, "make --directory=doc V=1 keymap-defaults.txt"
would not display the command it runs, because the command is
LC_ALL=C LANGUAGE=en /home/Kalle/src/elinks-0.12/doc/tools/keys2doc /home/Kalle/src/elinks-0.12/src/config/kbdbind.c keymap-defaults.txt > keymap-defaults.txt
and the build system would run
echo LC_ALL=C LANGUAGE=en /home/Kalle/src/elinks-0.12/doc/tools/keys2doc /home/Kalle/src/elinks-0.12/src/config/kbdbind.c keymap-defaults.txt > keymap-defaults.txt && LC_ALL=C LANGUAGE=en /home/Kalle/src/elinks-0.12/doc/tools/keys2doc /home/Kalle/src/elinks-0.12/src/config/kbdbind.c keymap-defaults.txt > keymap-defaults.txt
so, the initial echo was redirected to keymap-defaults.txt too,
and then overwritten with the intended output. Now, the build
system instead runs
echo 'LC_ALL=C LANGUAGE=en /home/Kalle/src/elinks-0.12/doc/tools/keys2doc /home/Kalle/src/elinks-0.12/src/config/kbdbind.c keymap-defaults.txt > keymap-defaults.txt' && LC_ALL=C LANGUAGE=en /home/Kalle/src/elinks-0.12/doc/tools/keys2doc /home/Kalle/src/elinks-0.12/src/config/kbdbind.c keymap-defaults.txt > keymap-defaults.txt
which echoes the redirection instead of executing it. This change
also makes the output correctly preserve quotes in some other rules.
If the user opens the same file again after it is in the cache, then
ELinks does not always open a new connection, so download->conn can be
NULL in init_type_query(), and download->conn->cgi would crash.
Don't read that, then; instead add a new flag cache_entry.cgi, which
http_got_header() sets or clears as soon as possible after the cache
entry has been created.
CGI scripts are distinguishable from normal files. I hope that this
fixes the bug 991. This commit also reverts the previous revert.
(cherry picked from commit 7ceba1e461)
libsmbclient's stdout and stderr interferred with ELinks's stdout
and stdin. That caused an assertion failure. Now the ELinks uses
different streams for processing of the smb protocol.
This reverts commit 7ceba1e461,
which is causing an assertion to fail if I open the same PDF
twice in a row, even if I cancel the dialog box when ELinks
first asks which program to run:
INTERNAL ERROR at /home/Kalle/src/elinks-0.12/src/session/download.c:980: assertion download && download->conn failed!
Forcing core dump! Man the Lifeboats! Women and children first!
But please DO NOT report this as a segfault!!! It is an internal error, not a
normal segfault, there is a huge difference in these for us the developers.
Also, noting the EXACT error you got above is crucial for hunting the problem
down. Thanks, and please get in touch with us.
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread -1216698688 (LWP 17877)]
0xb7a02d76 in raise () from /lib/libc.so.6
(gdb) backtrace 6
at /home/Kalle/src/elinks-0.12/src/util/error.c:179
fmt=0x816984c "assertion download && download->conn failed!")
at /home/Kalle/src/elinks-0.12/src/util/error.c:122
cached=0x8253ca8) at /home/Kalle/src/elinks-0.12/src/session/download.c:980
cached=0x8253ca8, frame=0)
at /home/Kalle/src/elinks-0.12/src/session/download.c:1339
at /home/Kalle/src/elinks-0.12/src/session/task.c:493
(More stack frames follow...)
There is a fix available but I don't trust it yet.
This reverts commit d0be89a16c, and thus
restores the ELinks 0.11 behaviour: always copy the data to a
temporary file before passing it to a MIME handler, even if the
"file:" URI scheme is being used. Previously, ELinks 0.12.GIT passed
the name of the original file directly to the handler. That was more
efficient but unfortunately gave the wrong result with local CGI.
The commit being reverted also claims to partially fix bug 238
(caching of local files). That bug is still open.
Currently, when ELinks passes the name of a local file to an external
MIME handler program, it encodes the name as a URI. Programs
typically do not expect this, and they then fail to open the file.
This patch makes ELinks instead quote the file name for the shell.
(The patch was attachment 425 of bug 991, by Witold Filipczyk.
This commit message was written by Kalle Olavi Niemitalo.)
Currently, when ELinks passes the name of a local file to an external
MIME handler program, it encodes the name as a URI. Programs
typically do not expect this, and they then fail to open the file.
ELinks should instead quote the file name for the shell.
Unfortunately, Debian has lines like this in /etc/mailcap:
audio/mpeg; xmms '%s'; test=test "$DISPLAY" != ""
If ELinks were changed to replace the %s with e.g.
'/home/Kalle/doc/Topfield/How to upgraded the Firmware(English).pdf'
(quotes included), then the quotes would cancel out and the shell
would split the file name into multiple arguments. That could even
provide a way for malicious persons to make ELinks run arbitrary
shell commands.
The examples in RFC 1524 all have %s without any quotes.
Debian has two bug reports about the quoting behaviour:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=90483http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=221717
This patch therefore tries to detect whether the %s has been quoted
already, and remove the quotes if so. That way, the next patch will
be able to safely add its own quotes. This removal of quotes applies
only to mailcap files; MIME handlers defined in elinks.conf should
already be in the format preferred by ELinks.
(The patch was attachment 438 of bug 991, by Witold Filipczyk.
This commit message was written by Kalle Olavi Niemitalo.)
This version takes about 1/300 of the time of the shell version
and fixes several errors in the output, most importantly that
option descriptions were being truncated at the first empty line.
Because help2doc is run only from make update-man, and the distributed
tarballs include prebuilt man pages, people building ELinks need not
have Perl installed.
This syncs some changes (ie. -> e.g. etc.) from elinks-0.12 or beyond.
I noticed them while updating the web pages, and apologize that I will
not spent the time to attribute it to the individual commits.
(cherry picked from commit 2bfc7b3724,
omitting generated files)
This adopts customized docbook manpage header from git's
Documentation/asciidoc.conf and does away with a couple of
ugly hacks.
(cherry picked from commit 0ecc8b9d60,
omitting generated files)
In set and unset commands, the <option> must not be quoted. In the
sample protocol.user.mailto.unix setting, the internal quotes were
using some manpage syntax, resulting in incorrect HTML output.
It basically rewrites the nroff formatting of the elinks(1) manpage and
is mainly checked in separately to make it easier to review later
updates.
This corresponds to commit b09b149986
in ELinks 0.11.4rc0.GIT.
Previously, file extensions added or modified via the menu did not get
saved to elinks.conf when config.saving_style was 3 (the default).
This patch makes the file-extension dialog box call option_changed,
which then sets OPT_TOUCHED, so that the option appears modified in
the option manager and will be saved.
Reported and patch reviewed by Witold Filipczyk.
AFAIK, all bugs in it have been fixed. Some bugs may still be lurking
but they are more likely to get caught if compression is enabled.
I also replaced COMP_NOTE with static text because xgettext does not
support macros in the argument of N_.
Run: python w32.py. The server listens on port 8900.
It handles only one request. The proper output are numbers
0 through 33999. I have no free disk to test it, but I'm afraid
that the ELinks will hang on Windows after reading 65536 bytes.
Let me know of results of such a test. The ELinks must be compiled
with the zlib library.
Git describe happily picks whatever annotated tag is closest to the
commit. I make use of many annotated tags that correspond not to
ELinks releases but rather to patches posted in bugzilla or sent in
email. So with git describe, the About window can display e.g.
"email/witekfl/2008-02-29-2-g705acfa-dirty", which is not the intended
use of this tag.
In the "next" branch of git.git, git describe apparently supports a
--match option with which it could be made to consider ELinks releases
only. However, that option is not yet in any released version of Git,
and anyhow ELinks should support older versions too.
Instead of using git describe, just show the full SHA-1, like
cg-commit-id would. The About dialog box also displays VERSION
from configure.in, so it isn't even particularly useful to show
the name of the latest tag. (The commit count might help though.)
The build ID now includes both last tagged version, commit generation
since last tagged version, as well as the leading characters of the
commit ID and a flag for dirty working tree.
(cherry picked from commit c2a0d3b969)
The bug was reported by Paul B. Mahol on elinks-users. The example is
from the FTP site he provided:
ftp.freebsd.org/pub/FreeBSD/ISO-IMAGES-ia64/
Message-ID: <3a142e750802262008l6fd55be5v44207bc4479dd3fc@mail.gmail.com>
(cherry picked from commit c069403b75)
... so all the tests with responses stretching multiple lines are
actually tested in their entirety.
(cherry picked from commit aa9a847c00,
resolving a conflict due to the use of get_test_opt)
