diff --git a/i2cmeter1/i2cmeter1.ino b/i2cmeter1/i2cmeter1.ino
index 872199b..eb0d4a1 100644
--- a/i2cmeter1/i2cmeter1.ino
+++ b/i2cmeter1/i2cmeter1.ino
@@ -1,6 +1,8 @@
 /*
 FFT, CW Decode for uBITX
 KD8CEC, Ian Lee
+
+Version : 0.8
 -----------------------------------------------------------------------
 License : See fftfunctions.cpp for FFT and CW Decode.
 **********************************************************************/
@@ -177,7 +179,7 @@ void SendCommandStr(char varIndex, char* sendValue)
   SWSerial_Write(0xFF);
 }
 
-char softBuff1Num[14] = {'p', 'm', '.', 'c', '0', '.', 'v', 'a', 'l', '=', 0, 0xFF, 0xFF, 0xFF};
+unsigned char softBuff1Num[14] = {'p', 'm', '.', 'c', '0', '.', 'v', 'a', 'l', '=', 0, 0xFF, 0xFF, 0xFF};
 void SendCommand1Num(char varType, char sendValue) //0~9 : Mode, nowDisp, ActiveVFO, IsDialLock, IsTxtType, IsSplitType
 {
   softBuff1Num[4] = varType;
@@ -472,58 +474,6 @@ int ForwardData(void)
   }
 }
 
-/*
-int SendMeterData(uint8_t isSend)
-{
-  int newScaledSMeter = 0;
-  if (ADC_DIFF > 11)
-  {
-    newScaledSMeter = 8;
-  }
-  else if (ADC_DIFF > 9)
-  {
-    newScaledSMeter = 7;
-  }
-  else if (ADC_DIFF > 8)
-  {
-    newScaledSMeter = 6;
-  }
-  else if (ADC_DIFF > 7)
-  {
-    newScaledSMeter = 5;
-  }
-  else if (ADC_DIFF > 6)
-  {
-    newScaledSMeter = 4;
-  }
-  else if (ADC_DIFF > 5)
-  {
-    newScaledSMeter = 3;
-  }
-  else if (ADC_DIFF > 4)
-  {
-    newScaledSMeter = 2;
-  }
-  else if (ADC_DIFF > 3)
-  {
-    newScaledSMeter = 1;
-  }
-  else
-  {
-    newScaledSMeter = 0;
-  }
-  scaledSMeter = newScaledSMeter;
-
-  if (isSend == 1)
-  {
-    if (L_scaledSMeter != scaledSMeter)
-    {
-      L_scaledSMeter = scaledSMeter;
-      SendCommand1Num(CMD_SMETER, L_scaledSMeter);  
-    }
-  }
-}
-*/
 int SendMeterData(uint8_t isSend)
 {
   //basic : 1.5Khz
@@ -788,7 +738,14 @@ extern double coeff;
 
 #define LAST_TIME_INTERVAL 159
 
-int SWRAdcValue = 0;
+//int SWRAdcValue = 0;
+float adcFWD = 0;
+float adcRWD = 0;
+uint16_t adjustPower = 230; 
+float swrMeasured;
+
+int clcCount = 0;
+
 
 //for boot Delay, a alot of data transfer
 //Delay 2.5 Sec
@@ -817,6 +774,7 @@ void loop()
   //===========================================
   if (TXStatus == 1)  //TX Mode
   {
+    /*
     int readedValue = 0;
     SMeterToUartIdleCount++;
     if (SMeterToUartIdleCount > 130)          //SWR  
@@ -834,9 +792,94 @@ void loop()
       SendCommand1Num('m',2);
       //PWR Send
     }
+    */
+
+    //************************************************
+    //Read FWD and RWD
+    adcFWD = adcFWD * 0.8 + analogRead(A2) * 0.2;
+    adcRWD = adcRWD * 0.8 + analogRead(A3) * 0.2;
+  
+    if (adcRWD > adcFWD)
+    {
+      adcRWD = adcFWD;
+    }
+
+    //for Realtime LCD Display
     ForwardData();
-    delay(5);
     
+    if (clcCount++ > 10)
+    {
+      //Calculated Power and swr and Send Information
+      clcCount = 0;
+  
+      //Calc PWR
+      float PWR = pow(adcFWD, 2);
+      PWR = PWR / adjustPower / 100;
+    
+      //Calc SWR
+      float Vratio = adcRWD / adcFWD;
+      if (adcRWD < 0.05 && adcFWD < 0.05)
+      {
+        //No signal
+        swrMeasured = 0;
+      } 
+      else if (Vratio > 0.99)
+      {
+        swrMeasured = 1999;
+      }
+      else
+      {
+        swrMeasured = ((1 + Vratio)/ (1 - Vratio));
+      }
+
+      //For Version 0.8
+      //Send SWR Information using Receive Signal Meter Protocol
+      scaledSMeter = (int)(swrMeasured + 0.5);
+      if (scaledSMeter > 9)
+      {
+        scaledSMeter = 9;
+      }
+
+      if (L_scaledSMeter != scaledSMeter)
+      {
+        L_scaledSMeter = scaledSMeter;
+        SendCommand1Num(CMD_SMETER, L_scaledSMeter);
+      }
+
+      //For Version 1.0
+      //need mod uBITX firmware and Nextion LCD and add Power adjust value option (uBITX Manager)
+      //Send Information
+      //SWR Send
+      //SendCommandL('m', SWRAdcValue);
+      //SendCommand1Num('m', 3);
+      //SMeterToUartIdleCount = 0;
+      //Send Power Information
+      int readedValue = (int)(PWR * 100);
+      SendCommandL('m', readedValue);
+      SendCommand1Num('m',2);
+
+      //Delay 250msec ~ 500msec for Nextion LCD Processing (using m protocol) 
+
+      for (int i = 0; i < 10; i++)
+      {
+        ForwardData();
+        if (TXStatus != 1)  //if TX -> RX break
+        {
+          break;
+        }
+        delay(25);
+      } //end of delay time
+      
+      //Send SWR
+      readedValue = (int)(swrMeasured * 100);
+      SendCommandL('m', readedValue);
+      SendCommand1Num('m', 3);
+      
+      //delay(50);
+      //return;
+    }
+    
+    delay(30);
     return; //Do not processing ADC, FFT, Decode Morse or RTTY, only Power and SWR Data Return
   }
 
@@ -969,5 +1012,3 @@ void loop()
     Decode_Morse(magnitude);
   } //enf of if 
 } //end of main
-
-