from __future__ import absolute_import from __future__ import division # These are the configuration parameters for receiving the # 10.7 MHz IF output of the AOR AR8600 receiver with the # SDR-IQ by RfSpace. This results in a 100 kHz to 3 GHz # wide range receiver with pan adapter. # Please do not change this sample file. # Instead copy it to your own .quisk_conf.py and make changes there. # See quisk_conf_defaults.py for more information. # Use this hardware module to control the AR8600 and SDR-IQ import quisk_hardware_sdr8600 as quisk_hardware # Start in FM mode default_mode = 'FM' use_sdriq = 1 # Use the SDR-IQ #sdriq_name = "/dev/ft2450" # Name of the SDR-IQ device to open sdriq_name = "/dev/ttyUSB2" # Name of the SDR-IQ device to open sdriq_clock = 66666667.0 # actual sample rate (66666667 nominal) sdriq_decimation = 1250 # Must be 360, 500, 600, or 1250 sample_rate = int(float(sdriq_clock) / sdriq_decimation + 0.5) # Don't change this name_of_sound_capt = "" # We do not capture from the soundcard name_of_sound_play = "hw:0" # Play back on this soundcard # Note: For the SDR-IQ, playback is stereo at 48000 Hertz. channel_i = 0 # Soundcard index of left channel channel_q = 1 # Soundcard index of right channel display_fraction = 0.85 # The edges of the full bandwidth are not valid