* General:
- Support for objprelink.
- Hack for autoconf 2.13/automake 1.4. Note that we can't use
the standard USE_AUTO* because they change things in work/*;
KDE has its own way of doing that.
- Light cleanup of extra dirs in the PLISTs provided by
my mkplistpkg[1] script.
- Speedups of both compile and runtime through the usage of
--disable-debug and --enable-final. The latter did not work
with the kdemultimedia package, unfortunately.
- Patch updates.
* audio/kdemultimedia2:
- Patch to fix KSCD on FreeBSD[2]. It works very well now.
* deskutils/kdepim:
- Enable kpilot[3]. Pull in the latest pilot-link stuff.
* devel/kdesdk,
* devel/kdevelop:
- No specific changes.
* devel/qt-designer:
- Make this port depend almost entirely on qt23 to make it more
maintainable, so I don't have to keep hacking the patches to
get them to apply.
* editors/koffice,
* games/kdegames,
* graphics/kdegraphics:
- No specific changes.
* misc/kdeaddons:
- SDL is required now. Cull SDL PLIST_SUB and such.
- Fix breakage from hardcoding "sdl-config".
* misc/kdeutils2:
- Fix problem with klaptopdaemon[4] where it didn't properly
display the battery time. This patch is untested, but applied.
* net/kdenetwork2:
- Fix DCC for KSIRC[5].
- Remove ktalkd from the build. It requires some weird thing
in the configure script that I don't have time to look at.
* sysutils/kdeadmin:
- No specific changes.
* textproc/kdoc:
- Remove bogus requirement that kdoc requires Perl 5.6.0; it sure
seems to operate fine with >= 5.005. But I'll let time tell.
* www/quanta:
- No specific changes (--disable-debug support only).
* x11/kde2:
- No specific changes.
* x11/kdebase2:
- Fix ksysguard compile by merging the files from the HEAD branch
of KDE CVS that were missing at release time for FreeBSD[6]. :\
* x11/kdelibs2:
- Recognize CUPS' spinoff[7].
- Add libxslt dependency since it was removed from kdelibs.
- Fix libxml compile problems[8] (accomplished by upgrading).
- Remove libkformula from port Makefile; this library has been
spun off into koffice.
- Fix mode problems with DCOP[9]. This allows you to save files
properly. It also seems to be a FreeBSD specific problem.
- Fix bashisms in kdeprint/imagetops script[10].
* x11-clocks/kdetoys2:
- No specific changes.
* x11-toolkits/qt23:
- Do NOT upgrade to QT 2.3.2[11].
- Allow devel/qt-designer to depend on this port entirely for the
patches by adding a perlre to accomplish this.
* x11-wm/kdeartwork:
- No specific changes.
Thanks to the FreeBSD/KDE[1] team[12] who helped me test these out!
[1] http://freebsd.kde.org/;
http://www.databits.net/cgi-bin/cvsweb.cgi/scripts/portbuild/mkplistpkg
[2] Submitted by: Matthew Holmes <matt@speakeasy.net>
[3] PR: 31914
Submitted by: Alan Eldridge <alane@geeksrus.net>
[4] PR: 28475
Submitted by: Arun Sharma <arun@sharmas.dhs.org>
[5] Submitted by: Luc Morin <luc_m@videotron.ca>
[6] Found at: http://webcvs.kde.org/kdebase/ksysguard/ksysguardd/FreeBSD/
[7] PR: 32321
Reported by: gad
Submitted by: James A. Halstead <jah4007@cs.rit.edu>
[8] PR: 32055
Reported by: William Richard <wrichard@trivalley.com>, others
[9] PR: 31629
Submitted by: Alan Eldridge <alane@geeksrus.net>
[10] PR: 32358
Submitted by: Alexander N. Kabaev <ak03@gte.com>
[11] PR: 31809
Requested by: Nathan Ahlstrom <nrahlstr@winternet.com> (denied)
[12] http://freebsd.kde.org/contact.shtml;
http://lists.csociety.org/pipermail/kde-freebsd;
http://lists.csociety.org/listinfo/kde-freebsd
maintain and improve QT/KDE on FreeBSD. This group (at this time)
consists of: demon, olgeni, kevlo, lauri@kde.org, rwatson, and will.
While I'm here, fail build of kdelibs11 if kdelibs2 is installed. This
was originally supposed to be committed with the 2.2 update, but...
Update to KDE 2.2:
* All patches except sysutils/kdeadmin/files/patch-rpmMessages.c:
- Either obsoleted or merged into KDE.
* All pkg-plists:
- Huge diffs are due to mass conversion from static HTML pages
to XML/XSL versions.
* audio/kdemultimedia2:
- aRts + Noatun, etc. now work and play MP3s et al properly,
using the mpg123 aRtsplugin. Remove mpeglib[,_artsplug]
from compile.
* converters/kdesupport2:
- Obsolete. No longer used in this version of KDE.
* deskutils/kdepim:
- Use autoconf and account for brokenness in the configure
script by replacing invocations of INSTALL under libical
with the proper incantations.
- Per David O'Brien's request, move libimap to libkimap;
this was performed by Rik Hemsley <rikkus@kde.org>.
* devel/kdesdk:
- New module with some helpful tools. One in particular that
seems demanded is ``kbabel'', which, as I've been told, is
a translator's wet dream.
- Workaround dumb problem in kbabel's libgettext (which I could
not figure out how to remove) by replacing its error() with
errc(). KBabel seems to run fine with this patch.
* devel/kdevelop:
- Fix lame check for libkdeui.so.* by replacing it with just
a check for libkdeui.so. It's been/being removed from
kdevelop after 2.2.
* editors/koffice:
- Fix kivio compile errors by substituting in PTHREAD_LIBS
in the correct place. Compensate for kivio's dependency
on pthreads by changing kivio to use LD_PRELOAD=/usr/lib/libc_r.so
in kivio.desktop.
* games/kdegames2:
- Some new games.
* graphics/kdegraphics2:
- Fix link errors in libkscan and kamera where they
require gettext (ie: add -lintl).
- Fix compile error in kamera.cpp which is dependent on a
correctly done gphoto2.. of course, this will only help
people who've manually installed gphoto2 themselves.
* net/kdenetwork2:
- Mimelib was moved here (reason for removal of kdesupport2).
* misc/kdeaddons:
- New module to FreeBSD ports; some simple addons for KDE2.
Suggested by Lauri Watts <lauri@kde.org>.
* misc/kdeutils2:
- Added a couple manpages.
* x11-clocks/kdetoys2:
- Some new apps.
* sysutils/kdeadmin:
- Remove kuser from compile because it has some problems. ;\
* x11/kdelibs2:
- Add libFAM dependency to help people who run FAM; FAM
increases the overall desktop responsiveness.
Submitted by Lauri Watts <lauri@kde.org>.
- Add CUPS dependency to bring in KDE's new print system.
- Add bzip2/libxml2 dependencies to support the new help kioslave.
- Disable installation of libltdl stuff to prevent conflicts
with other stuff. Submitted by wjv.
- Add pkg-req script to avoid conflicts with kdelibs11; add
to Makefile too. Submitted by benno.
- Be sure to remove the pth header conflicts stuff from the
arts/mcop_mt section.
- Fix problem with configure trying to find -lfam in the
wrong place.
- Remove kspell and api subdirs from doc; we don't need them,
and there are problems trying to build/install them.
Submitted by Lauri Watts <lauri@kde.org>.
* x11/kdebase2:
- Solve link permissions problem by changing the modes on
files installed by kdesktop/init/Templates to 644.
Submitted by Jim Durham <durham@w2xo.pgh.pa.us>.
* x11/kde2:
- Bump version; no other changes.
Special thanks to Lauri Watts <lauri@kde.org> for helping me test
packages generated by these changes on a virgin system. I believe
that this is the best-tested update I've ever done for KDE, and it
really shines this time around.
I just noticed there are a couple other PRs in the PR db that need
to be addressed. I will take care of those by tomorrow. Sorry...
PR: 22735, 28549
Blanket approval by: demon (kdesdk, kdevelop)
- bsd.port.mk update to use bsd.kde.mk for USE_{QT,KDE}*
- Cleanup corresponding ports for bsd.kde.mk update.
- Fix bsd.kde.mk: use correct kdelibs dependency, put qt at the bottom,
introduce QT_NONSTANDARD variable for nonstandard configure setup.
- Update KDE2 to 2.1.1. Two patches included in x11/kdelibs2 to fix the
proxy authentication that was broken for 2.1.1. Remove old patches.
- Potentially fix kdelibs build for alpha.
- Fix qt-designer 2.3.0 build.
- Ruby stuff left alone since it looks like black magic to me. Should
still work w/ compat shims for older USE_QT[,2] style. Some others
were also left alone for the same reason.
Reviewed by: portmgr, ports (bsd.kde.mk+bsd.port.mk)
Submitted by: David Faure <faure@kde.org> (proxy auth patches)
Alex Zepeda <garbanzo@kde.org> (old patches removal)
the KDE team's excellent work, I am initiating burn sequence for KDE
1.x. All base KDE1 ports are hereby nuked. I am also reluctantly
reassuming maintainership of the KDE2 ports. Official KDE 2.1 packages
built for FreeBSD 4.2-STABLE w/ XFree86 4.0.2 are available on KDE's
official ftp mirrors now. Enjoy!
Note: It seems that the KDE people rerolled their kdelibs and kdebase
packages, and a quick examination of diffs reveal minor changes, but the
port should still work. I'll fix the packaging problems that bento runs
into.
Approved by: kevlo
to the final release of KDE 2.0. Kevin Lo <kevlo@FreeBSD.org> will continue
as the new maintainer. He has commit privileges on the KDE tree, making him
an excellent candidate for this job. I'll be behind the scenes for awhile,
since there are some structural changes I'd like to make but I'd rather have
Kevin do the work. Please, people, direct your patches at Kevin and watch
his "freetime deprivation process" _really_ start. :-P
have not tried KDE 2.0 or haven't done so in awhile (i.e. since July or
before), you should try this. This version is extremely stable and offers
better functionality than before. This update also introduces the KDE2
modules kdegraphics and kdemultimedia to our ports tree. Additionally,
this marks the first time FreeBSD packages were announced as part of the
KDE2 beta release announcement! :-)
Most (if not all) of the remaining modules in KDE2 will be added for the
update WRT the final release.
A hack was added to fix building with SSL in kdelibs; this has been merged
in the main tree and will go away with 2.0 release update. Thanks to David
Faure <david@mandrakesoft.com> for his help regarding this.
Also, building the docs should now succeed because I've added a build
dependency on jade and linuxdoc (should be enough).
People can get my precompiled packages from the usual location on the KDE
FTP server (should spread to the mirrors Real Soon Now (tm)):
http://ftp.kde.org/pub/kde/unstable/distribution/2.0Beta5/tar/FreeBSD/
Have fun! Remember to reports bugs through http://bugs.kde.org/.
dependencies to kde2, and add koffice to kde2, because it's part of the
2.0 release. Fix my bogon in forgetting to remove obsolete qt22 patches.
The current state of the ports as far as building and installing is quite
good, but I expect minor problems with PLISTs other than for the ones I've
fixed here. I'm going to let bento figure it out. :-)
Please, test these ports and report bugs to submit@bugs.kde.org, and send
me problems with the ports themselves. I've found that KDE2 seems to have
stabilized significantly since the last snapshot.
And now, I am removing the last patch remaining in the KDE2 ports, except
for the QT 2.2 snapshot.
I can address some of its issues (should see it marked un-broken in about
3 hours, if they're trivial enough). It took too long to get this update
out the door... :-(
This is a rather stable version of KDE2. Release is hoped for sometime
next month, so I'm going to try to reroll snapshots this weekend.
Also decide policy by removing the interactive requirement in qt22's
configure script. I don't know why they bothered adding it there..
Bugged by: *many* bug-reports, requests, etc.
After short discussion with Imura-san, back out GIF-by-default until I can
confirm whether or not there are license issues with Unisys. I will deal
with this later. I should note that I'd committed to qt2[12] previously
without conferring with him on the GIF issue first.
One big ouchie: I didn't even set MASTER_SITE/MASTER_SITE_SUBDIR on qt22
properly.. but oh well. Nobody's perfect. :-)
Things should be un-broken now.. please test these ports! I'll be trying
to update them to a new snap after a week or so.
Pointy hat: will
Patches graciously submitted by: nra
it to install the basic KDE2 stuff. Also update kdetoys to finally
remove ImageMagick dependency and allow non-i18n people to use it.
And now, KDE2 is fully imported into the tree.
Repo-copies by: asami
This port requireat least s version 1.41 of the Qt library.
There will be an error reported by configure, if only an earlier
version is found, but no automatic port dependency exists (i.e.
the x11-toolkits/qt141 port has to be manually built and installed).
There may still be a problem with a missing -lXext in the kdesupport
port. This will be taken care of during the next few days, if the
problem still exists ...
