put mksh in the cross-shell-tests

HISTORY

@@ -1,44 +1,6 @@
 HISTORY
 =======
 
-Version 0.0.7
----------------------
-
-### Molly-guard
-The Molly-guard is now more accepting. For example, you no longer need to
-pass -f in this case: https://github.com/creationix/nvm/issues/357
-
-### Skipping tests
-Previously, tests were run if they were executable and were otherwise marked
-as skipped. Now, an executable script can indicate that it is skipped by
-exiting with code 3.  For example, if a test requires some dependancy, it
-might look for the dependency and then skip if it does not see the dependency.
-It might look like this.
-
-    #!/bin/sh
-    if which inkscape; then
-      exit 3 # status code 3 for skip
-    fi
-    inkscape blah blah ...
-
-I chose status code 3 sort of arbitrarily at first, but it turns out that it
-would the appropriate status code if these tests were Nagios plugins, as the
-concept of skipping a test is similar to the Nagios concept of unknown service
-status (https://nagios-plugins.org/doc/guidelines.html#AEN78).
-
-### Run on a file
-It is now possible to run urchin on a single file.
-This occurred to me when I wanted to run
-
-    urchin test/fast/Unit\ tests/nvm_ls_current
-
-on the nvm tests. I wound up running this instead.
-
-    urchin test/fast/Unit\ tests/ | grep nvm_ls_current
-
-The Molly guard is assessed, and the corresponding setup, setup_dir,
-teardown, and teardown_dir files are run in the appropriate order.
-
 Version 0.0.6
 ---------------------
 
@@ -52,9 +14,6 @@ Version 0.0.6
 * Remove the undocumented, experimental -x flag now that shall exists.
 * Display version number with the -v flag.
 * Document why Urchin is called "Urchin"
-* Update TODO
-* Support mksh (Change a printf command.)
-* Make long lines shorter.
 
 These changes are made somewhat separately in the branches "exit-on-fail",
 "remove-urchin-x", "tap", and "update-readme". They are rebased into one

LICENCE

@@ -1,5 +1,3 @@
-Copyright (c) 2013, 2014, 2015, 2016 Thomas Levine
-Copyright (c) 2014, Michael Klement
 Copyright (c) 2012, ScraperWiki Limited
 All rights reserved.
 

TODO

@@ -1,136 +0,0 @@
-Things I want
-=============
-
-Test speed
--------------
-Make tests run faster.
-https://github.com/bike-barn/hermit/issues/62
-
-First, easier thing is probably to run tests in parallel.
-
-Second, also easier thing is to tell people to save things to RAM rather than
-disk whenever they can.
-
-Third, harder thing is to put the test suite in RAM automatically. Maybe the
-whole test directory, which includes fixtures, gets copied to a tmpfs if one
-exists.
-
-Hmm or maybe there's a compromise: Tell people to mount /tmp as a tmpfs so
-that temp files are fast. Maybe allow people to set some other directory as
-the temporary file place, in case they want a different tmpfs location.
-
-Options
--------------
-I want long options. For example, there's presently -f and -e.
-I want to make them -f|--force and -e|--exit.
-
-Environment variables
--------------
-Do something to make it easier to debug environment variables, because that is
-often confusing.
-https://github.com/creationix/nvm/issues/719
-https://github.com/creationix/nvm/issues/589
-
-Documenting that people should run "env" when their tests fail might be good
-enough.
-
-Licensing and copyright
-------------------------
-* Reference all owners and years in the Copyright file
-* Consider copyleft licenses
-* Add license notices to other files if necessary
-
-Packaging
-------------
-Package for package managers.
-
-* I want NixOS, of course.
-* Debian is probably the big one.
-
-Other interesting package managers
-
-* Update the npm package
-* Homebrew (for Mac)
-
-Windows
-----------
-Try running Urchin in Windows somehow. Interpreters include
-
-* CygWin (https://www.cygwin.com/)
-* MSYS (http://mingw.org/wiki/msys)
-* GNU on Windows (https://github.com/bmatzelle/gow/wiki)
-* Git for Windows (https://git-scm.com/download/win)
-* win-bash (http://win-bash.sourceforge.net/)
-
-Consider copyleft licenses
-----------
-ScraperWiki owns the original version of Urchin (Thomas Levine did the early
-work as part of his work for ScraperWiki.) and originally licensed it under an
-MIT-style license. Other people made changes after this original ScraperWiki
-version. As of January 2016, they are just Thomas Levine (when he wasn't
-working for ScraperWiki) and Michael Klement.
-
-The original license was MIT just because that's what ScraperWiki put on
-everything. Should we change the license?
-
-The MIT-style license grants pretty much all rights. It says that you need
-to attribute when you redistribute source code, but you don't
-necessarily have to redistribute source code.
-
-A copyleft license adds the restriction that modified versions of the
-code need to be licensed under the same license. GNU licenses in
-particular require that source code be released if non-source versions are
-released, and the different GNU licenses differ in what how the
-non-source version is defined. (The original, GPL, discusses compiled
-binaries.) Copyleft doesn't mean anything specific for commercial use.
-
-MIT-licensed code can be modified and then licensed as GPL, because MIT
-license allows that, but GPL code can't be modified as MIT, because MIT
-doesn't allow that. And if we get all of the authors to agree on it, we
-can always add whatever crazy license we want, regardless of what we
-have already.
-
-The distinction between MIT-style and GNU-something might matter quite little
-in the case of Urchin.
-
-1. Urchin is written in an interpreted language (shell), so it might be
-   hard to distribute usefully without providing the source code.
-2. Urchin just runs tests; it doesn't get compiled with the rest of the
-   code (also because it's in shell). Thus, I think a GPL license on
-   Urchin wouldn't infect the code being tested.
-
-This is as far as I have gotten with contemplating license changes. For now
-we're sticking with the original MIT-style license, but it's easy to change
-licenses later.
-
-Nagios plugins
------------------
-It would be cool to run Nagios plugins with Urchin. This is already possible,
-actually, but it might be worth giving some special thought to it.
-https://nagios-plugins.org/doc/guidelines.html
-
-Source setup and teardown
---------------------
-If setup and teardown are sourced instead of executed, maybe we can more
-cleanly create and teardown temporary files.
-
-    (
-      . ./setup
-      ./$thetestfile
-      . ./teardown
-    )
-
-On the other hand, this could just be sourced explicitly in the test file,
-without the special setup and teardown feature.
-
-Running automated tasks
--------------------------
-Urchin might be appropriate for if you have lots of tasks that you want to run
-periodically; add an urchin call to your crontab, and call all of your other
-tasks with urchin. Here are some features that might make urchin better for
-this sort of thing.
-                                                      
-* Time how long each test/job takes
-* Optionally kill tests/jobs after a specific timeout threshold
-* Send output of different tests/jobs to different files for each file
-  descriptor (STDOUT, STDERR)

alternatives

@@ -1,9 +1,2 @@
 Totally different syntax and similar features, plus TAP output
 https://github.com/sstephenson/bats
-
-Relatively similar interface
-https://github.com/mlafeldt/sharness
-
-Lists of alternatives
-https://thomaslevine.com/!/shell-testing/
-https://github.com/mlafeldt/sharness#alternatives

readme.md

@@ -36,7 +36,7 @@ Urchin is contained in a single file, so you can install it by copying it to a
 directory in your `PATH`. For example, you can run the following as root.
 
     cd /usr/local/bin
-    wget https://raw.githubusercontent.com/tlevine/urchin/v0.0.6/urchin
+    wget https://raw.github.com/tlevine/urchin/master/urchin
     chmod +x urchin
 
 Urchin can be installed with npm too.
@@ -169,3 +169,9 @@ It does something similar, but the interface may be more intuitive.
 ## Alternatives to Urchin
 Alternatives to Urchin are discussed in
 [this blog post](https://blog.scraperwiki.com/2012/12/how-to-test-shell-scripts/).
+
+## Ideas for new features
+
+* Support [Nagios plugins](https://nagios-plugins.org/doc/guidelines.html)
+* Stop running if a test fails so one can use Urchin as a
+    [setup framework](https://github.com/tlevine/urchin/issues/16).

tests/Single file/.wrappers/setup

@@ -1 +0,0 @@
-echo setup

tests/Single file/.wrappers/setup_dir

@@ -1 +0,0 @@
-echo setup_dir

tests/Single file/.wrappers/teardown

@@ -1 +0,0 @@
-echo teardown

tests/Single file/.wrappers/teardown_dir

@@ -1 +0,0 @@
-echo teardown_dir

tests/Single file/.wrappers/thetest

@@ -1,2 +0,0 @@
-echo thetest
-exit 1

tests/Single file/Run on a single file.

@@ -1,3 +0,0 @@
-#!/bin/sh
-../../urchin .test
-# This will exit 0 if it worked.

tests/Single file/The file must exist.

@@ -1,2 +0,0 @@
-#!/bin/sh
-! ../../urchin not-a-file

tests/Single file/The wrappers should be run.

@@ -1,4 +0,0 @@
-tmp=$(mktemp)
-echo "Using temp file $tmp"
-../../urchin .wrappers > $tmp
-diff $tmp .wrapper-expectation

tests/Urchin should do a sanity check so that directories like the user home are not specified as tests./.chainsaw/successful test

@@ -0,0 +1,3 @@
+#!/bin/sh
+
+exit 0

tests/Urchin should do a sanity check so that directories like the user home are not specified as tests./.foo/test/bar/baz

@@ -1 +0,0 @@
-#!/usr/bin/env true

tests/Urchin should do a sanity check so that directories like the user home are not specified as tests./.test/successful test

@@ -1 +1,3 @@
-#!/usr/bin/env true
+#!/bin/sh
+
+exit 0

tests/Urchin should do a sanity check so that directories like the user home are not specified as tests./The Molly-guard should accept arguments that contain test in the middle.

@@ -1,3 +0,0 @@
-#!/bin/sh
-
-../../urchin .foo/test/bar

tests/Urchin should do a sanity check so that directories like the user home are not specified as tests./Urchin should warn if it is run on something that does not look like a test.

@@ -1,5 +1,3 @@
 #!/bin/sh
 
-tmp=$(mktemp -d)/blah
+! ../../urchin ./.chainsaw
-echo '#!/usr/bin/env true' > $tmp
-! ../../urchin $tmp

tests/skip/.test/fail

@@ -1 +0,0 @@
-exit 1

tests/skip/.test/skip

@@ -1 +0,0 @@
-exit 3

tests/skip/.test/succeed

@@ -1 +0,0 @@
-exit 0

tests/skip/Skip on exit code 3.

@@ -1 +0,0 @@
-test $(../../urchin -t .test/ | grep -c SKIP) -eq 1

urchin

@@ -1,26 +1,22 @@
 #!/bin/sh
 
-# This file is part of urchin. It is subject to the license terms in the
+# Make sure that CDPATH isn't set, as it causes `cd` to behave unpredictably - notably, it can produce output,
-# COPYING file found in the top-level directory of this distribution or at
+# which breaks fullpath().
-# https://raw.githubusercontent.com/tlevine/urchin/master/COPYING
-
-# No part of urchin, including this file, may be copied, modified, propagated,
-# or distributed except according to the terms contained in the COPYING file.
-
-
-
-# Make sure that CDPATH isn't set, as it causes `cd` to behave unpredictably -
-# notably, it can produce output, which breaks fullpath().
 unset CDPATH
 
 # Urchin version number
 VERSION=0.0.6
 
+fullpath() {
+  (
+    cd -- "$1"
+    pwd
+  )
+}
+
 indent() {
   level="$1"
-  if test "$level" -gt 0; then
+  printf "%$((2 * ${level}))s"
-    printf "%$((2 * ${level}))s"
-  fi
 }
 
 recurse() {
@@ -96,8 +92,6 @@ recurse() {
       [ -f teardown ] && [ -x teardown ] && ./teardown >> "$stdout_file"
       if [ $exit_code -eq 0 ]; then
         result=success
-      elif [ $exit_code -eq 3 ]; then
-        result=skip
       else
         result=fail
       fi
@@ -137,10 +131,7 @@ recurse() {
           # On fail, print a red '✗'
           printf '\033[31m✗ \033[0m'
           printf '%s\n' "${potential_test}"
-
+          printf '\033[31m' # Print output captured from failed test in red.
-          # Print output captured from failed test in red.
-          printf '\033[31m'
-
           cat "$stdout_file"
           printf '\033[0m'
         ;;
@@ -158,13 +149,8 @@ recurse() {
 }
 
 has_sh_or_no_shebang_line() {
-  # no shebang line at all
+  head -n 1 "$1" | grep -vqE '^#!' && return 0 # no shebang line at all
-  head -n 1 "$1" | grep -vqE '^#!' && return 0
+  head -n 1 "$1" | grep -qE '^#![[:blank:]]*/bin/sh($|[[:blank:]])' && return 0  # shebang line is '#!/bin/sh' or legal variations thereof
-
-  # shebang line is '#!/bin/sh' or legal variations thereof
-  head -n 1 "$1" | grep -qE '^#![[:blank:]]*/bin/sh($|[[:blank:]])' &&
-    return 0  
-
   return 1
 }
 
@@ -239,10 +225,7 @@ urchin_go() {
     echo "Done, took $elapsed $(plural second $elapsed)."
     printf '%s\n' "$passed $(plural test "$passed") passed."
     printf '%s\n' "$skipped $(plural test "$skipped") skipped."
-
+    [ $failed -gt 0 ] && printf '\033[31m' || printf '\033[32m' # If tests failed, print the message in red, otherwise in green.
-    # If tests failed, print the message in red, otherwise in green.
-    [ $failed -gt 0 ] && printf '\033[31m' || printf '\033[32m'
-
     printf '%s\n' "$failed $(plural test "$failed") failed."
     printf '\033[m'
   fi
@@ -274,11 +257,8 @@ do
         -s)
           shift
           shell_for_sh_tests=$1
-          which "$shell_for_sh_tests" > /dev/null || {
+          which "$shell_for_sh_tests" >/dev/null || { echo "Cannot find specified shell: '$shell_for_sh_tests'" >&2; urchin_help >&2; exit 2; }
-            echo "Cannot find specified shell: '$shell_for_sh_tests'" >&2
+          ;;
-            urchin_help >&2
-            exit 11
-          } ;;
         -t) tap_format=true;;
         -h|--help) urchin_help
           exit 0;;
@@ -291,17 +271,21 @@ do
     shift
 done
 
+# Verify argument for main stuff
+if [ "$#" != '1' ] || [ ! -d "$1" ]
+  then
+  [ -n "$1" ] && [ ! -d "$1" ] && echo "Not a directory: '$1'" >&2
+  echo "$USAGE" >&2
+  exit 2
+fi
+
+# Constants
+logfile=$(fullpath "$1")/.urchin.log
+stdout_file=$(fullpath "$1")/.urchin_stdout
+
 # Run or present the Molly guard.
-thetest=$(readlink -f "$1")
+if basename "$(fullpath "$1")" | grep -Fi 'test' > /dev/null || $force
-if echo "$thetest" | grep -Fi 'test' > /dev/null || $force; then
+  then
-  if test -d "$1"; then
-    d="$thetest"
-  else
-    d=$(echo "$thetest" | sed 's/\/[^\/]\{1,\}$//')
-    cd "$d"
-  fi
-  logfile="$d/.urchin.log"
-  stdout_file="$d/.urchin_stdout"
   urchin_go "$1" "$shell_for_sh_tests"
 else
   urchin_molly_guard