thac0/vim
1
0
Fork 0
forked from aniani/vim
Code
vim/runtime/filetype.vim
David Mandelberg 7546afbf52
patch 9.1.1196: filetype: config files for container tools are not recognized 
Problem:  filetype: config files for container tools are not recognized
Solution: detect the ones that aren't detected yet as toml filetype
          (David Mandelberg)

The .containerignore format doesn't look exactly the same as gitignore,
but very close. And .dockerignore is already using gitignore.

References:
https://github.com/containers/common/blob/main/docs/containerignore.5.md
https://github.com/containers/common/blob/main/docs/containers.conf.5.md
https://github.com/containers/storage/blob/main/docs/containers-storage.conf.5.md
https://github.com/containers/image/blob/main/docs/containers-registries.conf.5.md
https://github.com/containers/image/blob/main/docs/containers-registries.conf.d.5.md

I wasn't sure exactly how to interpret what containers.conf(5) was
saying about modules, so I looked at
https://github.com/containers/common/tree/main/pkg/config/testdata/modules
to get examples, and based the detection off those.

closes: #16852

Signed-off-by: David Mandelberg <david@mandelberg.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
2025-03-12 21:23:39 +01:00

3388 lines
90 KiB
VimL
Raw Blame History

" Vim support file to detect file types
"
" Maintainer: The Vim Project <https://github.com/vim/vim>
" Last Change: 2025 Mar 12
" Former Maintainer: Bram Moolenaar <Bram@vim.org>
" Listen very carefully, I will say this only once
if exists("did_load_filetypes")
finish
endif
let did_load_filetypes = 1
" Line continuation is used here, remove 'C' from 'cpoptions'
let s:cpo_save = &cpo
set cpo&vim
augroup filetypedetect
" Ignored extensions
if exists("*fnameescape")
au BufNewFile,BufRead ?\+.orig,?\+.bak,?\+.old,?\+.new,?\+.dpkg-dist,?\+.dpkg-old,?\+.dpkg-new,?\+.dpkg-bak,?\+.rpmsave,?\+.rpmnew,?\+.pacsave,?\+.pacnew
\ exe "doau filetypedetect BufRead " . fnameescape(expand("<afile>:r"))
au BufNewFile,BufRead *~
\ let s:name = expand("<afile>") |
\ let s:short = substitute(s:name, '\~\+$', '', '') |
\ if s:name != s:short && s:short != "" |
\ exe "doau filetypedetect BufRead " . fnameescape(s:short) |
\ endif |
\ unlet! s:name s:short
au BufNewFile,BufRead ?\+.in
\ if expand("<afile>:t") != "configure.in" |
\ exe "doau filetypedetect BufRead " . fnameescape(expand("<afile>:r")) |
\ endif
elseif &verbose > 0
echomsg "Warning: some filetypes will not be recognized because this version of Vim does not have fnameescape()"
endif
" Pattern used to match file names which should not be inspected.
" Currently finds compressed files.
if !exists("g:ft_ignore_pat")
let g:ft_ignore_pat = '\.\(Z\|gz\|bz2\|zip\|tgz\)$'
endif
" Function used for patterns that end in a star: don't set the filetype if the
" file name matches ft_ignore_pat.
" When using this, the entry should probably be further down below with the
" other StarSetf() calls.
func s:StarSetf(ft)
if expand("<amatch>") !~ g:ft_ignore_pat
exe 'setf ' . a:ft
endif
endfunc
" Vim help file, set ft explicitly, because 'modeline' might be off
au BufNewFile,BufRead */doc/*.txt
\ if getline('$') =~ '\(^\|\s\)vim:.*\<\(ft\|filetype\)=help\>'
\| setf help
\| endif
" Abaqus or Trasys
au BufNewFile,BufRead *.inp call dist#ft#Check_inp()
" 8th (Firth-derivative)
au BufNewFile,BufRead *.8th setf 8th
" A-A-P recipe
au BufNewFile,BufRead *.aap setf aap
" A2ps printing utility
au BufNewFile,BufRead */etc/a2ps.cfg,*/etc/a2ps/*.cfg,a2psrc,.a2psrc setf a2ps
" ABAB/4
au BufNewFile,BufRead *.abap setf abap
" ABC music notation
au BufNewFile,BufRead *.abc setf abc
" ABEL
au BufNewFile,BufRead *.abl setf abel
" ABNF
au BufNewFile,BufRead *.abnf setf abnf
" AceDB
au BufNewFile,BufRead *.wrm setf acedb
" Ada (83, 9X, 95)
au BufNewFile,BufRead *.adb,*.ads,*.ada setf ada
if has("vms")
au BufNewFile,BufRead *.gpr,*.ada_m,*.adc setf ada
else
au BufNewFile,BufRead *.gpr setf ada
endif
" AHDL
au BufNewFile,BufRead *.tdf setf ahdl
" AIDL
au BufNewFile,BufRead *.aidl setf aidl
" AMPL
au BufNewFile,BufRead *.run setf ampl
" Ant
au BufNewFile,BufRead build.xml setf ant
" ANTLR / PCCTS
"au BufNewFile,BufRead *.g setf antlr
au BufNewFile,BufRead *.g setf pccts
" ANTLR 4
au BufNewFile,BufRead *.g4 setf antlr4
" Arduino
au BufNewFile,BufRead *.ino,*.pde setf arduino
" Ash of busybox
au BufNewFile,BufRead .ash_history setf sh
" Asymptote
au BufNewFile,BufRead *.asy setf asy
" Apache config file
au BufNewFile,BufRead .htaccess,*/etc/httpd/*.conf setf apache
au BufNewFile,BufRead */etc/apache2/sites-*/*.com setf apache
" XA65 MOS6510 cross assembler
au BufNewFile,BufRead *.a65 setf a65
" Applescript
au BufNewFile,BufRead *.scpt setf applescript
" Automake (must be before the *.am pattern)
au BufNewFile,BufRead [mM]akefile.am,GNUmakefile.am setf automake
" Applix ELF
au BufNewFile,BufRead *.am setf elf
" ALSA configuration
au BufNewFile,BufRead .asoundrc,*/usr/share/alsa/alsa.conf,*/etc/asound.conf setf alsaconf
" Arc Macro Language
au BufNewFile,BufRead *.aml setf aml
" APT config file
au BufNewFile,BufRead apt.conf setf aptconf
au BufNewFile,BufRead */.aptitude/config setf aptconf
" more generic pattern far down
" Arch Inventory file
au BufNewFile,BufRead .arch-inventory,=tagging-method setf arch
" ART*Enterprise (formerly ART-IM)
au BufNewFile,BufRead *.art setf art
" AsciiDoc
au BufNewFile,BufRead *.asciidoc,*.adoc setf asciidoc
" ASN.1
au BufNewFile,BufRead *.asn,*.asn1 setf asn
" Active Server Pages (with Visual Basic Script)
au BufNewFile,BufRead *.asa
\ if exists("g:filetype_asa") |
\ exe "setf " . g:filetype_asa |
\ else |
\ setf aspvbs |
\ endif
" Active Server Pages (with Perl or Visual Basic Script)
au BufNewFile,BufRead *.asp
\ if exists("g:filetype_asp") |
\ exe "setf " . g:filetype_asp |
\ elseif getline(1) . getline(2) . getline(3) =~? "perlscript" |
\ setf aspperl |
\ else |
\ setf aspvbs |
\ endif
" Grub (must be before pattern *.lst)
au BufNewFile,BufRead */boot/grub/menu.lst,*/boot/grub/grub.conf,*/etc/grub.conf setf grub
" Maxima, see:
" https://maxima.sourceforge.io/docs/manual/maxima_71.html#file_005ftype_005fmaxima
" Must be before the pattern *.mac.
" *.dem omitted - also used by gnuplot demos
" *.mc omitted - used by dist#ft#McSetf()
au BufNewFile,BufRead *.demo,*.dm{1,2,3,t},*.wxm,maxima-init.mac setf maxima
" Assembly (all kinds)
" *.lst is not pure assembly, it has two extra columns (address, byte codes)
" *.[sS], *.[aA] usually Assembly - GNU
au BufNewFile,BufRead *.asm,*.[sS],*.[aA],*.mac,*.lst call dist#ft#FTasm()
" Assembly - Netwide
au BufNewFile,BufRead *.nasm setf nasm
" Assembly - Microsoft
au BufNewFile,BufRead *.masm setf masm
" Assembly - Macro (VAX)
au BufNewFile,BufRead *.mar setf vmasm
" Astro
au BufNewFile,BufRead *.astro setf astro
" Atlas
au BufNewFile,BufRead *.atl,*.as setf atlas
" Atom is based on XML
au BufNewFile,BufRead *.atom setf xml
" Authzed
au BufNewFile,BufRead *.zed setf authzed
" Autoit v3
au BufNewFile,BufRead *.au3 setf autoit
" Autohotkey
au BufNewFile,BufRead *.ahk setf autohotkey
" Autotest .at files are actually m4
au BufNewFile,BufRead *.at setf m4
" Avenue
au BufNewFile,BufRead *.ave setf ave
" Awk
au BufNewFile,BufRead *.awk,*.gawk setf awk
" B
au BufNewFile,BufRead *.mch,*.ref,*.imp setf b
" BASIC or Visual Basic
au BufNewFile,BufRead *.bas call dist#ft#FTbas()
au BufNewFile,BufRead *.bi,*.bm call dist#ft#FTbas()
" Bass
au BufNewFile,BufRead *.bass setf bass
" IBasic file (similar to QBasic)
au BufNewFile,BufRead *.iba,*.ibi setf ibasic
" FreeBasic file (similar to QBasic)
au BufNewFile,BufRead *.fb setf freebasic
" Batch file for MSDOS. See dist#ft#FTsys for *.sys
au BufNewFile,BufRead *.bat setf dosbatch
" *.cmd is close to a Batch file, but on OS/2 Rexx files and TI linker command files also use *.cmd.
" lnk: `/* comment */`, `// comment`, and `--linker-option=value`
" rexx: `/* comment */`, `-- comment`
au BufNewFile,BufRead *.cmd
\ if join(getline(1, 20), "\n") =~ 'MEMORY\|SECTIONS\|\%(^\|\n\)--\S\|\%(^\|\n\)//'
\| setf lnk
\| elseif getline(1) =~ '^/\*'
\| setf rexx
\| else
\| setf dosbatch
\| endif
" ABB RAPID or Batch file for MSDOS.
au BufNewFile,BufRead *.sys call dist#ft#FTsys()
if has("fname_case")
au BufNewFile,BufRead *.Sys,*.SYS call dist#ft#FTsys()
endif
au BufNewFile,BufRead *.sysx setf rapid
if has("fname_case")
au BufNewFile,BufRead *.sysX,*.Sysx,*.SysX,*.SYSX,*.SYSx setf rapid
endif
" Batch file for 4DOS
au BufNewFile,BufRead *.btm call dist#ft#FTbtm()
" BC calculator
au BufNewFile,BufRead *.bc setf bc
" BDF font
au BufNewFile,BufRead *.bdf setf bdf
" Beancount
au BufNewFile,BufRead *.beancount setf beancount
" BibTeX bibliography database file
au BufNewFile,BufRead *.bib setf bib
" BibTeX Bibliography Style
au BufNewFile,BufRead *.bst setf bst
" Bicep
au BufNewFile,BufRead *.bicep,*.bicepparam setf bicep
" BIND configuration
" sudoedit uses namedXXXX.conf
au BufNewFile,BufRead named*.conf,rndc*.conf,rndc*.key setf named
" BIND zone
au BufNewFile,BufRead named.root setf bindzone
au BufNewFile,BufRead *.zone setf bindzone
au BufNewFile,BufRead *.db call dist#ft#BindzoneCheck('')
" Blade
au BufNewFile,BufRead *.blade.php setf blade
" Blank
au BufNewFile,BufRead *.bl setf blank
" Bitbake
au BufNewFile,BufRead *.bb,*.bbappend,*.bbclass,*/build/conf/*.conf,*/meta{-*,}/conf/*.conf,*/project-spec/configs/*.conf setf bitbake
" Blkid cache file
au BufNewFile,BufRead */etc/blkid.tab,*/etc/blkid.tab.old setf xml
" BSDL
au BufNewFile,BufRead *.bsd,*.bsdl setf bsdl
" Bazel (https://bazel.build) and Buck2 (https://buck2.build/)
autocmd BufRead,BufNewFile *.bzl,*.bazel,WORKSPACE,WORKSPACE.bzlmod setf bzl
if has("fname_case")
" There is another check for BUILD and BUCK further below.
autocmd BufRead,BufNewFile *.BUILD,BUILD,BUCK setf bzl
endif
" Busted (Lua unit testing framework - configuration files)
au BufNewFile,BufRead .busted setf lua
" Bun history
au BufNewFile,BufRead .bun_repl_history setf javascript
" Bundle config
au BufNewFile,BufRead */.bundle/config setf yaml
" C or lpc
au BufNewFile,BufRead *.c call dist#ft#FTlpc()
au BufNewFile,BufRead *.lpc,*.ulpc setf lpc
" C3
au BufNewFile,BufRead *.c3,*.c3i,*.c3t setf c3
" Cairo
au BufNewFile,BufRead *.cairo setf cairo
" Calendar
au BufNewFile,BufRead calendar setf calendar
" Cap'n Proto
au BufNewFile,BufRead *.capnp setf capnp
" Cgdb config file
au BufNewFile,BufRead cgdbrc setf cgdbrc
" m17n database files. */m17n/* matches installed files, */.m17n.d/* matches
" per-user config files, */m17n-db/* matches the git repo. (must be before
" *.cs)
au BufNewFile,BufRead */{m17n,.m17n.d,m17n-db}/*.{ali,cs,dir,flt,fst,lnm,mic,mim,tbl} setf m17ndb
" C#
au BufNewFile,BufRead *.cs,*.csx,*.cake setf cs
" CSDL
au BufNewFile,BufRead *.csdl setf csdl
" Ctags
au BufNewFile,BufRead *.ctags setf conf
" Cabal
au BufNewFile,BufRead *.cabal setf cabal
" Cdrdao TOC or LaTeX \tableofcontents files
au BufNewFile,BufRead *.toc
\ if getline(1) =~# '\\contentsline' |setf tex|else|setf cdrtoc|endif
" Cdrdao config
au BufNewFile,BufRead */etc/cdrdao.conf,*/etc/defaults/cdrdao,*/etc/default/cdrdao,.cdrdao setf cdrdaoconf
" Cedar
au BufNewFile,BufRead *.cedar setf cedar
" Cfengine
au BufNewFile,BufRead cfengine.conf setf cfengine
" ChaiScript
au BufRead,BufNewFile *.chai setf chaiscript
" Chatito
au BufNewFile,BufRead *.chatito setf chatito
" Chktex
au BufRead,BufNewFile .chktexrc setf conf
" Chuck
au BufNewFile,BufRead *.ck setf chuck
" Comshare Dimension Definition Language
au BufNewFile,BufRead *.cdl setf cdl
" Conary Recipe
au BufNewFile,BufRead *.recipe setf conaryrecipe
" Containers config files
au BufNewFile,BufRead */containers/containers.conf{,.d/*.conf} setf toml
au BufNewFile,BufRead */containers/containers.conf.modules/*.conf setf toml
au BufNewFile,BufRead */containers/registries.conf{,.d/*.conf} setf toml
au BufNewFile,BufRead */containers/storage.conf setf toml
" Corn config file
au BufNewFile,BufRead *.corn setf corn
" ChainPack Object Notation (CPON)
au BufNewFile,BufRead *.cpon setf cpon
" Controllable Regex Mutilator
au BufNewFile,BufRead *.crm setf crm
" Cyn++
au BufNewFile,BufRead *.cyn setf cynpp
" Cynlib
" .cc and .cpp files can be C++ or Cynlib.
au BufNewFile,BufRead *.cc
\ if exists("cynlib_syntax_for_cc")|setf cynlib|else|setf cpp|endif
au BufNewFile,BufRead *.cpp
\ if exists("cynlib_syntax_for_cpp")|setf cynlib|else|setf cpp|endif
" Cypher query language
au BufNewFile,BufRead *.cypher setf cypher
" C++
au BufNewFile,BufRead *.cxx,*.c++,*.hh,*.hxx,*.hpp,*.ipp,*.moc,*.tcc,*.inl setf cpp
if has("fname_case")
au BufNewFile,BufRead *.C,*.H if !&fileignorecase | setf cpp | endif
endif
" C++ 20 modules (clang)
" https://clang.llvm.org/docs/StandardCPlusPlusModules.html#file-name-requirement
au BufNewFile,BufRead *.cppm,*.ccm,*.cxxm,*.c++m setf cpp
" .h files can be C, Ch C++, ObjC or ObjC++.
" Set c_syntax_for_h if you want C, ch_syntax_for_h if you want Ch. ObjC is
" detected automatically.
au BufNewFile,BufRead *.h call dist#ft#FTheader()
" Ch (CHscript)
au BufNewFile,BufRead *.chf setf ch
" TLH files are C++ headers generated by Visual C++'s #import from typelibs
au BufNewFile,BufRead *.tlh setf cpp
" Cascading Style Sheets
au BufNewFile,BufRead *.css setf css
" Century Term Command Scripts (*.cmd too)
au BufNewFile,BufRead *.con setf cterm
" Changelog
au BufNewFile,BufRead changelog.Debian,changelog.dch,NEWS.Debian,NEWS.dch,*/debian/changelog
\ setf debchangelog
au BufNewFile,BufRead [cC]hange[lL]og
\ if getline(1) =~ '; urgency='
\| setf debchangelog
\| else
\| setf changelog
\| endif
au BufNewFile,BufRead NEWS
\ if getline(1) =~ '; urgency='
\| setf debchangelog
\| endif
" CHILL
au BufNewFile,BufRead *..ch setf chill
" Changes for WEB and CWEB or CHILL
au BufNewFile,BufRead *.ch call dist#ft#FTchange()
" ChordPro
au BufNewFile,BufRead *.chopro,*.crd,*.cho,*.crdpro,*.chordpro setf chordpro
" Clangd
au BufNewFile,BufRead .clangd setf yaml
" Clang-format
au BufNewFile,BufRead .clang-format setf yaml
" Clang-tidy
au BufNewFile,BufRead .clang-tidy setf yaml
" Conda configuration file
au BufNewFile,BufRead .condarc,condarc setf yaml
" Matplotlib
au BufNewFile,BufRead *.mplstyle,matplotlibrc setf yaml
" Clean
au BufNewFile,BufRead *.dcl,*.icl setf clean
" Clever
au BufNewFile,BufRead *.eni setf cl
" Clever or dtd
au BufNewFile,BufRead *.ent call dist#ft#FTent()
" Cling
au BufNewFile,BufRead .cling_history setf cpp
" Clipper, FoxPro, ABB RAPID or eviews
au BufNewFile,BufRead *.prg call dist#ft#FTprg()
if has("fname_case")
au BufNewFile,BufRead *.Prg,*.PRG call dist#ft#FTprg()
endif
" Clojure
au BufNewFile,BufRead *.clj,*.cljs,*.cljx,*.cljc setf clojure
" Cmake
au BufNewFile,BufRead CMakeLists.txt,*.cmake,*.cmake.in setf cmake
" CmakeCache
autocmd BufRead,BufNewFile CMakeCache.txt setf cmakecache
" Cmusrc
au BufNewFile,BufRead */.cmus/{autosave,rc,command-history,*.theme} setf cmusrc
au BufNewFile,BufRead */cmus/{rc,*.theme} setf cmusrc
" Cobol
au BufNewFile,BufRead *.cbl,*.cob setf cobol
" cobol or zope form controller python script? (heuristic)
au BufNewFile,BufRead *.cpy
\ if getline(1) =~ '^##' |
\ setf python |
\ else |
\ setf cobol |
\ endif
" Coco/R
au BufNewFile,BufRead *.atg setf coco
" Cold Fusion
au BufNewFile,BufRead *.cfm,*.cfi,*.cfc setf cf
" Configure scripts
au BufNewFile,BufRead configure.in,configure.ac setf config
" Cooklang
au BufNewFile,BufRead *.cook setf cook
" Clinical Quality Language (CQL)
" .cql is also mentioned as the 'XDCC Catcher queue list' file extension.
" If support for XDCC Catcher is needed in the future, the contents of the file
" needs to be inspected.
au BufNewFile,BufRead *.cql setf cqlang
" Crystal
au BufNewFile,BufRead *.cr setf crystal
" CSV Files
au BufNewFile,BufRead *.csv setf csv
" CUDA Compute Unified Device Architecture
au BufNewFile,BufRead *.cu,*.cuh setf cuda
" Cue
au BufNewFile,BufRead *.cue setf cue
" Debian devscripts
au BufNewFile,BufRead devscripts.conf,.devscripts setf sh
" Dockerfile; Podman uses the same syntax with name Containerfile
" Also see Dockerfile.* below.
au BufNewFile,BufRead Containerfile,Dockerfile,dockerfile,*.[dD]ockerfile setf dockerfile
" WildPackets EtherPeek Decoder
au BufNewFile,BufRead *.dcd setf dcd
" Enlightenment configuration files
au BufNewFile,BufRead *enlightenment/*.cfg setf c
" Eterm
au BufNewFile,BufRead *Eterm/*.cfg setf eterm
" Elixir or Euphoria
au BufNewFile,BufRead *.ex call dist#ft#ExCheck()
" Elixir
au BufRead,BufNewFile mix.lock,*.exs setf elixir
au BufRead,BufNewFile *.eex,*.leex setf eelixir
" Elvish
au BufRead,BufNewFile *.elv setf elvish
" Euphoria 3 or 4
au BufNewFile,BufRead *.eu,*.ew,*.exu,*.exw call dist#ft#EuphoriaCheck()
if has("fname_case")
au BufNewFile,BufRead *.EU,*.EW,*.EX,*.EXU,*.EXW call dist#ft#EuphoriaCheck()
endif
" Execline (s6) scripts
au BufNewFile,BufRead *s6*/\(up\|down\|run\|finish\) setf execline
au BufNewFile,BufRead s6-* setf execline
" Fontconfig config files
au BufNewFile,BufRead fonts.conf setf xml
" Faust
au BufNewFile,BufRead *.lib setf faust
au BufNewFile,BufRead *.dsp call dist#ft#FTdsp()
" Libreoffice config files
au BufNewFile,BufRead *.xcu,*.xlb,*.xlc,*.xba setf xml
au BufNewFile,BufRead psprint.conf,sofficerc setf dosini
" Libtool files
au BufNewFile,BufRead *.lo,*.la,*.lai setf sh
" Lynx config files
au BufNewFile,BufRead lynx.cfg setf lynx
" LyRiCs
au BufNewFile,BufRead *.lrc setf lyrics
" MLIR
au BufNewFile,BufRead *.mlir setf mlir
" Modula-3 configuration language (must be before *.cfg and *makefile)
au BufNewFile,BufRead *.quake,cm3.cfg setf m3quake
au BufNewFile,BufRead m3makefile,m3overrides setf m3build
" XDG mimeapps.list
au BufNewFile,BufRead mimeapps.list setf dosini
" Many tools written in Python use dosini as their config
" like setuptools, pudb, coverage, pypi, gitlint, oelint-adv, pylint, bpython, mypy
" (must be before *.cfg)
au BufNewFile,BufRead pip.conf,setup.cfg,pudb.cfg,.coveragerc,.pypirc,.gitlint,.oelint.cfg setf dosini
au BufNewFile,BufRead {.,}pylintrc,*/bpython/config,*/mypy/config setf dosini
" Many tools written in Python use toml as their config, like black
au BufNewFile,BufRead .black setf toml
au BufNewFile,BufRead black
\ if getline(1) =~ 'tool.back'
\| setf toml
\| endif
" LXQt's programs use dosini as their config
au BufNewFile,BufRead */{lxqt,screengrab}/*.conf setf dosini
" Quake
au BufNewFile,BufRead *baseq[2-3]/*.cfg,*id1/*.cfg setf quake
au BufNewFile,BufRead *quake[1-3]/*.cfg setf quake
" Quake C
au BufNewFile,BufRead *.qc setf c
" LaTeX packages use LaTeX as their configuration, such as:
" ~/.texlive/texmf-config/tex/latex/hyperref/hyperref.cfg
" ~/.texlive/texmf-config/tex/latex/docstrip/docstrip.cfg
au BufNewFile,BufRead */tex/latex/**.cfg setf tex
" Wakatime config
au BufNewFile,BufRead .wakatime.cfg setf dosini
" Configure files
au BufNewFile,BufRead *.cfg call dist#ft#FTcfg()
if has("fname_case")
au BufNewFile,BufRead *.Cfg,*.CFG call dist#ft#FTcfg()
endif
" Cucumber
au BufNewFile,BufRead *.feature setf cucumber
" Communicating Sequential Processes
au BufNewFile,BufRead *.csp,*.fdr setf csp
" CUPL logic description and simulation
au BufNewFile,BufRead *.pld setf cupl
au BufNewFile,BufRead *.si setf cuplsim
" Dafny
au BufNewFile,BufRead *.dfy setf dafny
" Dart
au BufRead,BufNewfile *.dart,*.drt setf dart
" Debian Control
au BufNewFile,BufRead */{debian,DEBIAN}/control setf debcontrol
au BufNewFile,BufRead control
\ if getline(1) =~ '^Source:\|^Package:'
\| setf debcontrol
\| endif
" Debian Copyright
au BufNewFile,BufRead */debian/copyright setf debcopyright
au BufNewFile,BufRead copyright
\ if getline(1) =~ '^Format:'
\| setf debcopyright
\| endif
" Debian Sources.list
au BufNewFile,BufRead */etc/apt/sources.list setf debsources
au BufNewFile,BufRead */etc/apt/sources.list.d/*.list setf debsources
au BufNewFile,BufRead */etc/apt/sources.list.d/*.sources setf deb822sources
" Deno history
au BufNewFile,BufRead deno_history.txt setf javascript
" Deny hosts
au BufNewFile,BufRead denyhosts.conf setf denyhosts
" Dhall
au BufNewFile,BufRead *.dhall setf dhall
" dnsmasq(8) configuration files
au BufNewFile,BufRead */etc/dnsmasq.conf setf dnsmasq
" ROCKLinux package description
au BufNewFile,BufRead *.desc setf desc
" the D language or dtrace
au BufNewFile,BufRead */dtrace/*.d setf dtrace
au BufNewFile,BufRead *.d call dist#ft#DtraceCheck()
" Desktop files
au BufNewFile,BufRead *.desktop,*.directory setf desktop
" Dict config
au BufNewFile,BufRead dict.conf,.dictrc setf dictconf
" Dictd config
au BufNewFile,BufRead dictd*.conf setf dictdconf
" DEP3 formatted patch files
au BufNewFile,BufRead */debian/patches/* call dist#ft#Dep3patch()
" Diff files
au BufNewFile,BufRead *.diff,*.rej setf diff
au BufNewFile,BufRead *.patch
\ if getline(1) =~# '^From [0-9a-f]\{40,\} Mon Sep 17 00:00:00 2001$' |
\ setf gitsendemail |
\ else |
\ setf diff |
\ endif
" Dircolors
au BufNewFile,BufRead .dir_colors,.dircolors,*/etc/DIR_COLORS setf dircolors
" Diva (with Skill) or InstallShield
au BufNewFile,BufRead *.rul
\ if getline(1).getline(2).getline(3).getline(4).getline(5).getline(6) =~? 'InstallShield' |
\ setf ishd |
\ else |
\ setf diva |
\ endif
" DCL (Digital Command Language - vms) or DNS zone file
au BufNewFile,BufRead *.com call dist#ft#BindzoneCheck('dcl')
" DOT
au BufNewFile,BufRead *.dot,*.gv setf dot
" Dune
au BufNewFile,BufRead jbuild,dune,dune-project,dune-workspace,dune-file setf dune
" Dylan - lid files
au BufNewFile,BufRead *.lid setf dylanlid
" Dylan - intr files (melange)
au BufNewFile,BufRead *.intr setf dylanintr
" Dylan
au BufNewFile,BufRead *.dylan setf dylan
" Microsoft Module Definition or Modula-2
au BufNewFile,BufRead *.def call dist#ft#FTdef()
if has("fname_case")
au BufNewFile,BufRead *.DEF setf modula2
endif
" Dracula
au BufNewFile,BufRead *.drac,*.drc,*.lvs,*.lpe setf dracula
" Datascript
au BufNewFile,BufRead *.ds setf datascript
" dsl: DSSSL or Structurizr
au BufNewFile,BufRead *.dsl
\ if getline(1) =~ '^\s*<\!' |
\ setf dsl |
\ else |
\ setf structurizr |
\ endif
" DTD (Document Type Definition for XML)
au BufNewFile,BufRead *.dtd setf dtd
" Devicetree (.its for U-Boot Flattened Image Trees, .keymap for ZMK keymap, and
" .overlay for Zephyr overlay)
au BufNewFile,BufRead *.dts,*.dtsi,*.dtso setf dts
au BufNewFile,BufRead *.its setf dts
au BufNewFile,BufRead *.keymap setf dts
au BufNewFile,BufRead *.overlay setf dts
" Earthfile
au BufNewFile,BufRead Earthfile setf earthfile
" EDIF (*.edf,*.edif,*.edn,*.edo) or edn
au BufNewFile,BufRead *.ed\(f\|if\|o\) setf edif
au BufNewFile,BufRead *.edn
\ if getline(1) =~ '^\s*(\s*edif\>' |
\ setf edif |
\ else |
\ setf clojure |
\ endif
" EditorConfig
au BufNewFile,BufRead .editorconfig setf editorconfig
" Embedix Component Description
au BufNewFile,BufRead *.ecd setf ecd
" Eiffel or Specman or Euphoria
au BufNewFile,BufRead *.e,*.E call dist#ft#FTe()
" Elinks configuration
au BufNewFile,BufRead elinks.conf setf elinks
" ERicsson LANGuage; Yaws is erlang too
au BufNewFile,BufRead *.erl,*.hrl,*.yaws setf erlang
" Elm
au BufNewFile,BufRead *.elm setf elm
" Elm Filter Rules file
au BufNewFile,BufRead filter-rules setf elmfilt
" Elsa - https://github.com/ucsd-progsys/elsa
au BufNewFile,BufRead *.lc setf elsa
" EdgeDB Schema Definition Language
au BufNewFile,BufRead *.esdl setf esdl
" ESMTP rc file
au BufNewFile,BufRead *esmtprc setf esmtprc
" ESQL-C
au BufNewFile,BufRead *.ec,*.EC setf esqlc
" Esterel
au BufNewFile,BufRead *.strl setf esterel
" Essbase script
au BufNewFile,BufRead *.csc setf csc
" Exim
au BufNewFile,BufRead exim.conf setf exim
" Expect
au BufNewFile,BufRead *.exp setf expect
" Exports
au BufNewFile,BufRead exports setf exports
" Falcon
au BufNewFile,BufRead *.fal setf falcon
" Fantom
au BufNewFile,BufRead *.fan,*.fwt setf fan
" Factor
au BufNewFile,BufRead *.factor setf factor
" Fennel
autocmd BufRead,BufNewFile *.fnl,{,.}fennelrc setf fennel
" Fetchmail RC file
au BufNewFile,BufRead .fetchmailrc setf fetchmail
" FIRRTL - Flexible Internal Representation for RTL
au BufNewFile,BufRead *.fir setf firrtl
" Fish shell
au BufNewFile,BufRead *.fish setf fish
" Flatpak config
au BufNewFile,BufRead */flatpak/repo/config setf dosini
" Focus Executable
au BufNewFile,BufRead *.fex,*.focexec setf focexec
" Focus Master file (but not for auto.master)
au BufNewFile,BufRead auto.master setf conf
au BufNewFile,BufRead *.mas,*.master setf master
" Forth
au BufNewFile,BufRead *.ft,*.fth,*.4th setf forth
" Reva Forth
au BufNewFile,BufRead *.frt setf reva
" Fortran
if has("fname_case")
au BufNewFile,BufRead *.F,*.FOR,*.FPP,*.FTN,*.F77,*.F90,*.F95,*.F03,*.F08 setf fortran
endif
au BufNewFile,BufRead *.for,*.fortran,*.fpp,*.ftn,*.f77,*.f90,*.f95,*.f03,*.f08 setf fortran
" Fortran or Forth
au BufNewFile,BufRead *.f call dist#ft#FTf()
" Framescript
au BufNewFile,BufRead *.fsl setf framescript
" FStab
au BufNewFile,BufRead fstab,mtab setf fstab
" Func
au BufNewFile,BufRead *.fc setf func
" Fusion
au BufRead,BufNewFile *.fusion setf fusion
" F# or Forth
au BufNewFile,BufRead *.fs call dist#ft#FTfs()
" FHIR Shorthand (FSH)
au BufNewFile,BufRead *.fsh setf fsh
" F#
au BufNewFile,BufRead *.fsi,*.fsx setf fsharp
" GDB command files
au BufNewFile,BufRead .gdbinit,gdbinit,.gdbearlyinit,gdbearlyinit,*.gdb setf gdb
" GDMO
au BufNewFile,BufRead *.mo,*.gdmo setf gdmo
" GDscript
au BufNewFile,BufRead *.gd setf gdscript
" Godot resource
au BufRead,BufNewFile *.tscn,*.tres setf gdresource
" Godot shader
au BufRead,BufNewFile *.gdshader,*.shader setf gdshader
" Gedcom
au BufNewFile,BufRead *.ged,lltxxxxx.txt setf gedcom
" Gemtext
au BufNewFile,BufRead *.gmi,*.gemini setf gemtext
" Gift (Moodle)
autocmd BufRead,BufNewFile *.gift setf gift
" Git
au BufNewFile,BufRead COMMIT_EDITMSG,MERGE_MSG,TAG_EDITMSG setf gitcommit
au BufNewFile,BufRead NOTES_EDITMSG,EDIT_DESCRIPTION setf gitcommit
au BufNewFile,BufRead *.git/config,.gitconfig,*/etc/gitconfig setf gitconfig
au BufNewFile,BufRead */.config/git/config setf gitconfig
au BufNewFile,BufRead *.git/config.worktree setf gitconfig
au BufNewFile,BufRead *.git/worktrees/*/config.worktree setf gitconfig
au BufNewFile,BufRead .gitmodules,*.git/modules/*/config setf gitconfig
if exists('$XDG_CONFIG_HOME')
au BufNewFile,BufRead $XDG_CONFIG_HOME/git/config setf gitconfig
au BufNewFile,BufRead $XDG_CONFIG_HOME/git/attributes setf gitattributes
au BufNewFile,BufRead $XDG_CONFIG_HOME/git/ignore setf gitignore
endif
au BufNewFile,BufRead .gitattributes,*.git/info/attributes setf gitattributes
au BufNewFile,BufRead */.config/git/attributes setf gitattributes
au BufNewFile,BufRead */etc/gitattributes setf gitattributes
au BufNewFile,BufRead .gitignore,*.git/info/exclude setf gitignore
au BufNewFile,BufRead */.config/git/ignore,*.prettierignore setf gitignore
au BufNewFile,BufRead */.config/fd/ignore,.fdignore,.ignore setf gitignore
au BufNewFile,BufRead .rgignore,.dockerignore,.containerignore setf gitignore
au BufNewFile,BufRead .npmignore,.vscodeignore setf gitignore
au BufNewFile,BufRead git-rebase-todo setf gitrebase
au BufRead,BufNewFile .gitsendemail.msg.?????? setf gitsendemail
au BufNewFile,BufRead *.git/*
\ if getline(1) =~# '^\x\{40,\}\>\|^ref: ' |
\ setf git |
\ endif
" Gkrellmrc
au BufNewFile,BufRead gkrellmrc,gkrellmrc_? setf gkrellmrc
" Gleam
au BufNewFile,BufRead *.gleam setf gleam
" GLSL
" Extensions supported by Khronos reference compiler (with one exception, ".glsl")
" https://github.com/KhronosGroup/glslang
au BufNewFile,BufRead *.vert,*.tesc,*.tese,*.glsl,*.geom,*.frag,*.comp,*.rgen,*.rmiss,*.rchit,*.rahit,*.rint,*.rcall setf glsl
" GN (generate ninja) files
au BufNewFile,BufRead *.gn,*.gni setf gn
" GP scripts (2.0 and onward)
au BufNewFile,BufRead *.gp,.gprc setf gp
" GPG
au BufNewFile,BufRead */.gnupg/options setf gpg
au BufNewFile,BufRead */.gnupg/gpg.conf setf gpg
au BufNewFile,BufRead */usr/*/gnupg/options.skel setf gpg
if !empty($GNUPGHOME)
au BufNewFile,BufRead $GNUPGHOME/options setf gpg
au BufNewFile,BufRead $GNUPGHOME/gpg.conf setf gpg
endif
" gnash(1) configuration files
au BufNewFile,BufRead gnashrc,.gnashrc,gnashpluginrc,.gnashpluginrc setf gnash
" Gitolite
au BufNewFile,BufRead gitolite.conf setf gitolite
au BufNewFile,BufRead {,.}gitolite.rc,example.gitolite.rc setf perl
" Glimmer-flavored TypeScript and JavaScript
au BufNewFile,BufRead *.gts setf typescript.glimmer
au BufNewFile,BufRead *.gjs setf javascript.glimmer
" Gnuplot scripts
au BufNewFile,BufRead *.gpi,*.gnuplot,.gnuplot_history setf gnuplot
" Go (Google)
au BufNewFile,BufRead *.go setf go
au BufNewFile,BufRead Gopkg.lock setf toml
au BufRead,BufNewFile go.work setf gowork
" GoAccess configuration
au BufNewFile,BufRead goaccess.conf setf goaccess
" GrADS scripts
au BufNewFile,BufRead *.gs setf grads
" GraphQL
au BufNewFile,BufRead *.graphql,*.graphqls,*.gql setf graphql
" Gretl
au BufNewFile,BufRead *.gretl setf gretl
" Groovy
au BufNewFile,BufRead *.gradle,*.groovy,Jenkinsfile setf groovy
" GNU Server Pages
au BufNewFile,BufRead *.gsp setf gsp
" Group file
au BufNewFile,BufRead */etc/group,*/etc/group-,*/etc/group.edit,*/etc/gshadow,*/etc/gshadow-,*/etc/gshadow.edit,*/var/backups/group.bak,*/var/backups/gshadow.bak setf group
" GTK RC
au BufNewFile,BufRead .gtkrc,gtkrc setf gtkrc
" GYP
au BufNewFile,BufRead *.gyp,*.gypi setf gyp
" Hack
au BufRead,BufNewFile *.hack,*.hackpartial setf hack
" Haml
au BufNewFile,BufRead *.haml setf haml
" Hamster Classic | Playground files
au BufNewFile,BufRead *.hsm setf hamster
" Handlebars
au BufNewFile,BufRead *.hbs setf handlebars
" Hare
au BufNewFile,BufRead *.ha setf hare
au BufNewFile,BufRead README call dist#ft#FTharedoc()
" Haskell
au BufNewFile,BufRead *.hs,*.hsc,*.hs-boot,*.hsig setf haskell
au BufNewFile,BufRead *.lhs setf lhaskell
au BufNewFile,BufRead *.chs setf chaskell
au BufNewFile,BufRead cabal.project setf cabalproject
au BufNewFile,BufRead */{.,}cabal/config setf cabalconfig
au BufNewFile,BufRead cabal.config setf cabalconfig
au BufNewFile,BufRead *.persistentmodels setf haskellpersistent
" Haste
au BufNewFile,BufRead *.ht setf haste
au BufNewFile,BufRead *.htpp setf hastepreproc
" HCL
au BufRead,BufNewFile *.hcl setf hcl
" Go checksum file (must be before *.sum Hercules)
au BufNewFile,BufRead go.sum,go.work.sum setf gosum
" Hercules
au BufNewFile,BufRead *.vc,*.ev,*.sum,*.errsum setf hercules
" HEEx
au BufRead,BufNewFile *.heex setf heex
" HEX (Intel)
au BufNewFile,BufRead *.hex,*.ihex,*.int,*.ihe,*.ihx,*.mcs,*.h32,*.h80,*.h86,*.a43,*.a90 setf hex
" Hjson
au BufNewFile,BufRead *.hjson setf hjson
" HLS Playlist (or another form of playlist)
au BufNewFile,BufRead *.m3u,*.m3u8 setf hlsplaylist
" Hollywood
au BufRead,BufNewFile *.hws setf hollywood
" Hoon
au BufRead,BufNewFile *.hoon setf hoon
" TI Code Composer Studio General Extension Language
au BufNewFile,BufRead *.gel setf gel
" Tilde (must be before HTML)
au BufNewFile,BufRead *.t.html setf tilde
" Translate shell
au BufNewFile,BufRead init.trans,*/etc/translate-shell,.trans setf clojure
" HTML (.stm for server side, .shtml is server-side or superhtml)
au BufNewFile,BufRead *.html,*.htm,*.shtml,*.stm call dist#ft#FThtml()
au BufNewFile,BufRead *.cshtml setf html
" HTTP request files
au BufNewFile,BufRead *.http setf http
" HTML with Ruby - eRuby
au BufNewFile,BufRead *.erb,*.rhtml setf eruby
" HTML with M4
au BufNewFile,BufRead *.html.m4 setf htmlm4
" Some template. Used to be HTML Cheetah.
au BufNewFile,BufRead *.tmpl setf template
" Host config
au BufNewFile,BufRead */etc/host.conf setf hostconf
" Hosts access
au BufNewFile,BufRead */etc/hosts.allow,*/etc/hosts.deny setf hostsaccess
" Hurl
au BufRead,BufNewFile *.hurl setf hurl
" Hy
au BufRead,BufNewFile *.hy,.hy-history setf hy
" Hyper Builder
au BufNewFile,BufRead *.hb setf hb
" Hyprland Configuration language
au BufNewFile,BufRead */hypr/*.conf,hypr\(land\|paper\|idle\|lock\).conf setf hyprlang
" Httest
au BufNewFile,BufRead *.htt,*.htb setf httest
" i3
au BufNewFile,BufRead */i3/config setf i3config
au BufNewFile,BufRead */.i3/config setf i3config
" sway
au BufNewFile,BufRead */sway/config setf swayconfig
au BufNewFile,BufRead */.sway/config setf swayconfig
" Icon
au BufNewFile,BufRead *.icn setf icon
" IDL (Interface Description Language)
au BufNewFile,BufRead *.idl call dist#ft#FTidl()
" Microsoft IDL (Interface Description Language) Also *.idl
" MOF = WMI (Windows Management Instrumentation) Managed Object Format
au BufNewFile,BufRead *.odl,*.mof setf msidl
" Icewm menu
au BufNewFile,BufRead */.icewm/menu setf icemenu
" Indent profile (must come before IDL *.pro!)
au BufNewFile,BufRead .indent.pro setf indent
au BufNewFile,BufRead indent.pro call dist#ft#ProtoCheck('indent')
" IDL (Interactive Data Language), Prolog, Cproto or zsh module C
au BufNewFile,BufRead *.pro call dist#ft#ProtoCheck('idlang')
" Idris2
au BufNewFile,BufRead *.idr setf idris2
au BufNewFile,BufRead *.lidr setf lidris2
" Indent RC
au BufNewFile,BufRead indentrc setf indent
" Inform
au BufNewFile,BufRead *.inf,*.INF setf inform
" Initng
au BufNewFile,BufRead */etc/initng/*/*.i,*.ii setf initng
" Innovation Data Processing
au BufRead,BufNewFile upstream.dat\c,upstream.*.dat\c,*.upstream.dat\c setf upstreamdat
au BufRead,BufNewFile fdrupstream.log,upstream.log\c,upstream.*.log\c,*.upstream.log\c,UPSTREAM-*.log\c setf upstreamlog
au BufRead,BufNewFile upstreaminstall.log\c,upstreaminstall.*.log\c,*.upstreaminstall.log\c setf upstreaminstalllog
au BufRead,BufNewFile usserver.log\c,usserver.*.log\c,*.usserver.log\c setf usserverlog
au BufRead,BufNewFile usw2kagt.log\c,usw2kagt.*.log\c,*.usw2kagt.log\c setf usw2kagtlog
" Ipfilter
au BufNewFile,BufRead ipf.conf,ipf6.conf,ipf.rules setf ipfilter
" Ipkg for Idris 2 language
au BufNewFile,BufRead *.ipkg setf ipkg
" Informix 4GL (source - canonical, include file, I4GL+M4 preproc.)
au BufNewFile,BufRead *.4gl,*.4gh,*.m4gl setf fgl
" .INI file for MSDOS
au BufNewFile,BufRead *.ini,*.INI setf dosini
" SysV Inittab
au BufNewFile,BufRead inittab setf inittab
" Inko
au BufNewFile,BufRead *.inko setf inko
" Inno Setup
au BufNewFile,BufRead *.iss setf iss
" J
au BufNewFile,BufRead *.ijs setf j
" JAL
au BufNewFile,BufRead *.jal,*.JAL setf jal
" Jam
au BufNewFile,BufRead *.jpl,*.jpr setf jam
" Janet
au BufNewFile,BufRead *.janet setf janet
" Java
au BufNewFile,BufRead *.java,*.jav,*.jsh setf java
" JavaCC
au BufNewFile,BufRead *.jj,*.jjt setf javacc
" JavaScript, ECMAScript, ES module script, CommonJS script
au BufNewFile,BufRead *.js,*.jsm,*.javascript,*.es,*.mjs,*.cjs setf javascript
au BufNewFile,BufRead .node_repl_history setf javascript
" JavaScript with React
au BufNewFile,BufRead *.jsx setf javascriptreact
" Java Server Pages
au BufNewFile,BufRead *.jsp setf jsp
" Java Properties resource file (note: doesn't catch font.properties.pl)
au BufNewFile,BufRead *.properties,*.properties_??,*.properties_??_?? setf jproperties
" Eclipse preference files use Java Properties syntax
au BufNewFile,BufRead org.eclipse.*.prefs setf jproperties
" Jess
au BufNewFile,BufRead *.clp setf jess
" Jgraph
au BufNewFile,BufRead *.jgr setf jgraph
" Jinja
au BufNewFile,BufRead *.jinja setf jinja
" Jujutsu
au BufNewFile,BufRead *.jjdescription setf jjdescription
" Jovial
au BufNewFile,BufRead *.jov,*.j73,*.jovial setf jovial
" Jq
au BufNewFile,BufRead *.jq setf jq
" JSON5
au BufNewFile,BufRead *.json5 setf json5
" JSON Patch (RFC 6902)
au BufNewFile,BufRead *.json-patch setf json
" Geojson is also json
au BufNewFile,BufRead *.geojson setf json
" Jupyter Notebook and jupyterlab config is also json
au BufNewFile,BufRead *.ipynb,*.jupyterlab-settings setf json
" Sublime config
au BufNewFile,BufRead *.sublime-project,*.sublime-settings,*.sublime-workspace setf json
" Other files that look like json
au BufNewFile,BufRead .prettierrc,.firebaserc,.stylelintrc,.lintstagedrc,flake.lock,deno.lock,.swcrc setf json
" JSONC (JSON with comments)
au BufNewFile,BufRead *.jsonc,.babelrc,.eslintrc,.jsfmtrc,bun.lock setf jsonc
au BufNewFile,BufRead .jshintrc,.jscsrc,.vsconfig,.hintrc,.swrc,[jt]sconfig*.json setf jsonc
" Visual Studio Code settings
au BufRead,BufNewFile ~/*/{Code,VSCodium}/User/*.json setf jsonc
" JSON
au BufNewFile,BufRead *.json,*.jsonp,*.webmanifest setf json
" JSON Lines
au BufNewFile,BufRead *.jsonl setf jsonl
" Jsonnet
au BufNewFile,BufRead *.jsonnet,*.libsonnet setf jsonnet
" Julia
au BufNewFile,BufRead *.jl setf julia
" Just
au BufNewFile,BufRead \c{,*.}justfile,\c*.just setf just
" KAREL
au BufNewFile,BufRead *.kl setf karel
if has("fname_case")
au BufNewFile,BufRead *.KL setf karel
endif
" KDL
au BufNewFile,BufRead *.kdl setf kdl
" Kixtart
au BufNewFile,BufRead *.kix setf kix
" Kuka Robot Language
au BufNewFile,BufRead *.src call dist#ft#FTsrc()
au BufNewFile,BufRead *.dat call dist#ft#FTdat()
au BufNewFile,BufRead *.sub setf krl
if has("fname_case")
au BufNewFile,BufRead *.Src,*.SRC call dist#ft#FTsrc()
au BufNewFile,BufRead *.Dat,*.DAT call dist#ft#FTdat()
au BufNewFile,BufRead *.Sub,*.SUB setf krl
endif
" Kimwitu[++]
au BufNewFile,BufRead *.k setf kwt
" Kivy
au BufNewFile,BufRead *.kv setf kivy
" Kotlin
au BufNewFile,BufRead *.kt,*.ktm,*.kts setf kotlin
" KDE script
au BufNewFile,BufRead *.ks setf kscript
" Kconfig
au BufNewFile,BufRead Kconfig,Kconfig.debug,Config.in setf kconfig
" Lace (ISE)
au BufNewFile,BufRead *.ace,*.ACE setf lace
" Lalrpop
au BufNewFile,Bufread *.lalrpop setf lalrpop
" Larch Shared Language
au BufNewFile,BufRead .lsl call dist#ft#FTlsl()
" Latexmkrc
au BufNewFile,BufRead .latexmkrc,latexmkrc setf perl
" Latte
au BufNewFile,BufRead *.latte,*.lte setf latte
" Limits
au BufNewFile,BufRead */etc/limits,*/etc/*limits.conf,*/etc/*limits.d/*.conf setf limits
" LambdaProlog or SML (see dist#ft#FTmod for *.mod)
au BufNewFile,BufRead *.sig call dist#ft#FTsig()
" LDAP configuration
au BufNewFile,BufRead ldaprc,.ldaprc,ldap.conf setf ldapconf
" LDAP LDIF
au BufNewFile,BufRead *.ldif setf ldif
" Luadoc, Ldoc (must be before *.ld)
au BufNewFile,BufRead config.ld setf lua
" Ld loader
au BufNewFile,BufRead *.ld,*/ldscripts/* setf ld
" Lean
au BufNewFile,BufRead *.lean setf lean
" Ledger
au BufRead,BufNewFile *.ldg,*.ledger,*.journal setf ledger
" lf configuration (lfrc)
au BufNewFile,BufRead lfrc setf lf
" Leo
au BufNewFile,BufRead *.leo setf leo
" Less
au BufNewFile,BufRead *.less setf less
" Lex
au BufNewFile,BufRead *.lex,*.l,*.lxx,*.l++ setf lex
" Libao
au BufNewFile,BufRead */etc/libao.conf,*/.libao setf libao
" Libsensors
au BufNewFile,BufRead */etc/sensors.conf,*/etc/sensors3.conf setf sensors
" LFTP
au BufNewFile,BufRead lftp.conf,.lftprc,*lftp/rc setf lftp
" Lifelines (or Lex for C++!)
au BufNewFile,BufRead *.ll call dist#ft#FTll()
" Lilo: Linux loader
au BufNewFile,BufRead lilo.conf setf lilo
" Lilypond
au BufNewFile,BufRead *.ly,*.ily setf lilypond
" Lisp (*.el = ELisp)
" *.jl was removed, it's also used for Julia, better skip than guess wrong.
if has("fname_case")
au BufNewFile,BufRead *.lsp,*.lisp,*.asd,*.el,*.L,.emacs,.sawfishrc setf lisp
else
au BufNewFile,BufRead *.lsp,*.lisp,*.asd,*.el,.emacs,.sawfishrc setf lisp
endif
" *.cl = Common Lisp or OpenCL
au BufNewFile,BufRead *.cl call dist#ft#FTcl()
" SBCL implementation of Common Lisp
au BufNewFile,BufRead sbclrc,.sbclrc setf lisp
" Liquidsoap
au BufNewFile,BufRead *.liq setf liquidsoap
" Liquid
au BufNewFile,BufRead *.liquid setf liquid
" Lite
au BufNewFile,BufRead *.lite,*.lt setf lite
" LiteStep RC files
au BufNewFile,BufRead */LiteStep/*/*.rc setf litestep
" Livebook
au BufNewFile,BufRead *.livemd setf livebook
" Login access
au BufNewFile,BufRead */etc/login.access setf loginaccess
" Login defs
au BufNewFile,BufRead */etc/login.defs setf logindefs
" Logtalk
au BufNewFile,BufRead *.lgt setf logtalk
" LOTOS
au BufNewFile,BufRead *.lotos setf lotos
" LOTOS or LaTeX \listoftables files
au BufNewFile,BufRead *.lot
\ if getline(1) =~# '\\contentsline' |setf tex|else|setf lotos|endif
" Lout (also: *.lt)
au BufNewFile,BufRead *.lou,*.lout setf lout
" Lua, Texlua
au BufNewFile,BufRead *.lua,*.tlu,.lua_history setf lua
" Luau
au BufNewFile,BufRead *.luau setf luau
" Luau config
au BufNewFile,BufRead .luaurc setf jsonc
" Luacheck
au BufNewFile,BufRead .luacheckrc setf lua
" Luarocks
au BufNewFile,BufRead *.rockspec,rock_manifest setf lua
" Linden Scripting Language (Second Life)
au BufNewFile,BufRead *.lsl call dist#ft#FTlsl()
" Lynx style file (or LotusScript!)
au BufNewFile,BufRead *.lss setf lss
" M4
au BufNewFile,BufRead *.m4
\ if expand("<afile>") !~? 'html.m4$\|fvwm2rc' | setf m4 | endif
au BufNewFile,BufRead .m4_history setf m4
" MaGic Point
au BufNewFile,BufRead *.mgp setf mgp
" Mail (for Elm, trn, mutt, muttng, rn, slrn, neomutt)
au BufNewFile,BufRead snd.\d\+,.letter,.letter.\d\+,.followup,.article,.article.\d\+,pico.\d\+,mutt{ng,}-*-\w\+,mutt[[:alnum:]_-]\\\{6\},neomutt-*-\w\+,neomutt[[:alnum:]_-]\\\{6\},ae\d\+.txt,/tmp/SLRN[0-9A-Z.]\+,*.eml setf mail
" Mail aliases
au BufNewFile,BufRead */etc/mail/aliases,*/etc/aliases setf mailaliases
" Mailcap configuration file
au BufNewFile,BufRead .mailcap,mailcap setf mailcap
" Makefile
au BufNewFile,BufRead *[mM]akefile,*.mk,*.mak call dist#ft#FTmake()
au BufNewFile,BufRead Kbuild setf make
" MakeIndex
au BufNewFile,BufRead *.ist,*.mst setf ist
" Mallard
au BufNewFile,BufRead *.page setf mallard
" Manpage
au BufNewFile,BufRead *.man setf man
" Man config
au BufNewFile,BufRead */etc/man.conf,man.config setf manconf
" Maple V
au BufNewFile,BufRead *.mv,*.mpl,*.mws setf maple
" Map (UMN mapserver config file)
au BufNewFile,BufRead *.map
\ if getline(1) =~ '^\*\+$' |
\ setf lnkmap |
\ else |
\ setf map |
\ endif
" Markdown
au BufNewFile,BufRead *.markdown,*.mdown,*.mkd,*.mkdn,*.mdwn,*.md
\ if exists("g:filetype_md") |
\ exe "setf " . g:filetype_md |
\ else |
\ setf markdown |
\ endif
" Mason (it used to include *.comp, are those Mason files?)
au BufNewFile,BufRead *.mason,*.mhtml setf mason
" Mathematica, Matlab, Murphi, Objective C or Octave
au BufNewFile,BufRead *.m call dist#ft#FTm()
" Mathematica notebook and package files
au BufNewFile,BufRead *.nb,*.wl setf mma
" Maya Extension Language
au BufNewFile,BufRead *.mel setf mel
" mbsync
au BufNewFile,BufRead .mbsyncrc setf conf
" mcmeta
au BufNewFile,BufRead *.mcmeta setf json
" MediaWiki
au BufNewFile,BufRead *.mw,*.wiki setf mediawiki
" Mercurial (hg) commit file
au BufNewFile,BufRead hg-editor-*.txt setf hgcommit
" Mercurial config (looks like generic config file)
au BufNewFile,BufRead *.hgrc,*hgrc setf cfg
" Mermaid
au BufNewFile,BufRead *.mmd,*.mmdc,*.mermaid setf mermaid
" Meson Build system config
au BufNewFile,BufRead meson.build,meson.options,meson_options.txt setf meson
au BufNewFile,BufRead *.wrap setf dosini
" Messages (logs mostly)
au BufNewFile,BufRead */log/{auth,cron,daemon,debug,kern,lpr,mail,messages,news/news,syslog,user}{,.log,.err,.info,.warn,.crit,.notice}{,.[0-9]*,-[0-9]*} setf messages
" Metafont
au BufNewFile,BufRead *.mf setf mf
" MetaPost
au BufNewFile,BufRead *.mp setf mp
au BufNewFile,BufRead *.mpxl,*.mpiv,*.mpvi let b:mp_metafun = 1 | setf mp
" MGL
au BufNewFile,BufRead *.mgl setf mgl
" MIX - Knuth assembly
au BufNewFile,BufRead *.mix,*.mixal setf mix
" MMIX or VMS makefile
au BufNewFile,BufRead *.mms call dist#ft#FTmms()
" msmtp
au BufNewFile,BufRead .msmtprc setf msmtp
" Symbian meta-makefile definition (MMP)
au BufNewFile,BufRead *.mmp setf mmp
" ABB Rapid, Modula-2, Modsim III or LambdaProlog
au BufNewFile,BufRead *.mod call dist#ft#FTmod()
if has("fname_case")
au BufNewFile,BufRead *.Mod,*.MOD call dist#ft#FTmod()
endif
au BufNewFile,BufRead *.modx setf rapid
if has("fname_case")
au BufNewFile,BufRead *.modX,*.Modx,*.ModX,*.MODX,*.MODx setf rapid
endif
" Modula-3 (.m3, .i3, .mg, .ig)
au BufNewFile,BufRead *.[mi][3g] setf modula3
" Larch/Modula-3
au BufNewFile,BufRead *.lm3 setf modula3
" Modconf
au BufNewFile,BufRead */etc/modules.conf,*/etc/modules,*/etc/conf.modules setf modconf
" Monk
au BufNewFile,BufRead *.isc,*.monk,*.ssc,*.tsc setf monk
" MOO
au BufNewFile,BufRead *.moo setf moo
" Moonscript
au BufNewFile,BufRead *.moon setf moonscript
" Move language
au BufNewFile,BufRead *.move setf move
" MPD is based on XML
au BufNewFile,BufRead *.mpd setf xml
" Mplayer config
au BufNewFile,BufRead mplayer.conf,*/.mplayer/config setf mplayerconf
" Motorola S record
au BufNewFile,BufRead *.s19,*.s28,*.s37,*.mot,*.srec setf srec
" Mrxvtrc
au BufNewFile,BufRead mrxvtrc,.mrxvtrc setf mrxvtrc
" Msql
au BufNewFile,BufRead *.msql setf msql
" Mysql
au BufNewFile,BufRead *.mysql,.mysql_history setf mysql
" Tcl Shell RC file
au BufNewFile,BufRead tclsh.rc setf tcl
" M$ Resource files
" /etc/Muttrc.d/file.rc is muttrc
au BufNewFile,BufRead *.rc,*.rch
\ if expand("<afile>") !~ "/etc/Muttrc.d/" |
\ setf rc |
\ endif
" Mojo
" Mojo files use either .mojo or .🔥 as extension
au BufNewFile,BufRead *.mojo,*.🔥 setf mojo
" MuPAD source
au BufRead,BufNewFile *.mu setf mupad
" Mush
au BufNewFile,BufRead *.mush setf mush
" Mustache
au BufNewFile,BufRead *.mustache setf mustache
" Mutt setup file (also for Muttng)
au BufNewFile,BufRead Mutt{ng,}rc setf muttrc
" N1QL
au BufRead,BufNewfile *.n1ql,*.nql setf n1ql
" Neomutt log
au BufNewFile,BufRead *.neomuttdebug* setf neomuttlog
" Nano
au BufNewFile,BufRead */etc/nanorc,*.nanorc setf nanorc
" Nastran input/DMAP
"au BufNewFile,BufRead *.dat setf nastran
" Natural
au BufNewFile,BufRead *.NS[ACGLMNPS] setf natural
" Noemutt setup file
au BufNewFile,BufRead Neomuttrc setf neomuttrc
" Netrc
au BufNewFile,BufRead .netrc setf netrc
" Neofetch
au BufNewFile,BufRead */neofetch/config.conf setf sh
" Nginx
au BufNewFile,BufRead *.nginx,nginx*.conf,*nginx.conf,*/etc/nginx/*,*/usr/local/nginx/conf/*,*/nginx/*.conf setf nginx
" Nim file
au BufNewFile,BufRead *.nim,*.nims,*.nimble setf nim
" Ninja file
au BufNewFile,BufRead *.ninja setf ninja
" Nix
au BufRead,BufNewFile *.nix setf nix
" Norg
au BufNewFile,BufRead *.norg setf norg
" NPM RC file
au BufNewFile,BufRead npmrc,.npmrc setf dosini
" Novell netware batch files
au BufNewFile,BufRead *.ncf setf ncf
" Nroff/Troff (*.ms and *.t are checked below)
au BufNewFile,BufRead *.me
\ if expand("<afile>") != "read.me" && expand("<afile>") != "click.me" |
\ setf nroff |
\ endif
au BufNewFile,BufRead *.tr,*.nr,*.roff,*.tmac,*.mom setf nroff
au BufNewFile,BufRead *.[1-9] call dist#ft#FTnroff()
" Nroff or Objective C++
au BufNewFile,BufRead *.mm call dist#ft#FTmm()
" Not Quite C
au BufNewFile,BufRead *.nqc setf nqc
" notmuch
au BufNewFile,BufRead .notmuch-config{,.*} setf dosini
au BufNewFile,BufRead ~/.config/notmuch/*/config setf dosini
if exists('$XDG_CONFIG_HOME')
au BufNewFile,BufRead $XDG_CONFIG_HOME/notmuch/*/config setf dosini
endif
" NSE - Nmap Script Engine - uses Lua syntax
au BufNewFile,BufRead *.nse setf lua
" NSIS
au BufNewFile,BufRead *.nsi,*.nsh setf nsis
" N-Triples
au BufNewFile,BufRead *.nt setf ntriples
" Nu
au BufNewFile,BufRead *.nu setf nu
" Oblivion Language and Oblivion Script Extender
au BufNewFile,BufRead *.obl,*.obse,*.oblivion,*.obscript setf obse
" Objdump
au BufNewFile,BufRead *.objdump,*.cppobjdump setf objdump
" OCaml
au BufNewFile,BufRead *.ml,*.mli,*.mll,*.mly,.ocamlinit,*.mlt,*.mlp,*.mlip,*.mli.cppo,*.ml.cppo setf ocaml
" Occam
au BufNewFile,BufRead *.occ setf occam
" Octave
au BufNewFile,BufRead octave.conf,.octaverc,octaverc,*/octave/history setf octave
" Odin
au BufNewFile,BufRead *.odin setf odin
" Omnimark
au BufNewFile,BufRead *.xom,*.xin setf omnimark
" ondir
au BufNewFile,BufRead .ondirrc setf ondir
" OPAM
au BufNewFile,BufRead opam,*.opam,*.opam.template,opam.locked,*.opam.locked setf opam
" OpenFOAM
au BufNewFile,BufRead [a-zA-Z0-9]*Dict\(.*\)\=,[a-zA-Z]*Properties\(.*\)\=,*Transport\(.*\),fvSchemes,fvSolution,fvConstrains,fvModels,*/constant/g,*/0\(\.orig\)\=/* call dist#ft#FTfoam()
" OpenROAD
au BufNewFile,BufRead *.or setf openroad
" OPL
au BufNewFile,BufRead *.[Oo][Pp][Ll] setf opl
" OpenSCAD
au BufNewFile,BufRead *.scad setf openscad
" Oracle config file
au BufNewFile,BufRead *.ora setf ora
" Org (Emacs' org-mode)
au BufNewFile,BufRead *.org,*.org_archive setf org
" Packet filter conf
au BufNewFile,BufRead pf.conf setf pf
" ini style config files, using # comments
au BufNewFile,BufRead pacman.conf,mpv.conf setf confini
au BufNewFile,BufRead */.aws/config,*/.aws/credentials setf confini
au BufNewFile,BufRead *.nmconnection setf confini
au BufNewFile,BufRead paru.conf setf confini
" Pacman hooks
au BufNewFile,BufRead *.hook
\ if getline(1) == '[Trigger]' |
\ setf confini |
\ endif
" Pacman makepkg
au BufNewFile,BufRead {.,}makepkg.conf setf sh
" Pacman log
au BufNewFile,BufRead pacman.log setf pacmanlog
" Pam conf
au BufNewFile,BufRead */etc/pam.conf setf pamconf
" Pam environment
au BufNewFile,BufRead pam_env.conf,.pam_environment setf pamenv
" PApp
au BufNewFile,BufRead *.papp,*.pxml,*.pxsl setf papp
" Password file
au BufNewFile,BufRead */etc/passwd,*/etc/passwd-,*/etc/passwd.edit,*/etc/shadow,*/etc/shadow-,*/etc/shadow.edit,*/var/backups/passwd.bak,*/var/backups/shadow.bak setf passwd
" Pascal (also *.p, *.pp, *.inc)
au BufNewFile,BufRead *.pas setf pascal
" Pascal or Puppet manifest
au BufNewFile,BufRead *.pp call dist#ft#FTpp()
" Delphi
au BufNewFile,BufRead *.dpr setf pascal
" Xilinx labtools project file or Lazarus program file
au BufNewFile,BufRead *.lpr
\ if getline(1) =~# "<?xml" |
\ setf xml |
\ else |
\ setf pascal |
\ endif
" Free Pascal makefile definition file
au BufNewFile,BufRead *.fpc setf fpcmake
" Path of Exile item filter
au BufNewFile,BufRead *.filter setf poefilter
" PDF
au BufNewFile,BufRead *.pdf setf pdf
" PCMK - HAE - crm configure edit
au BufNewFile,BufRead *.pcmk setf pcmk
" PEM (Privacy-Enhanced Mail)
au BufNewFile,BufRead *.pem,*.cer,*.crt,*.csr setf pem
" Perl or Prolog
if has("fname_case")
au BufNewFile,BufRead *.pl,*.PL call dist#ft#FTpl()
else
au BufNewFile,BufRead *.pl call dist#ft#FTpl()
endif
au BufNewFile,BufRead *.plx,*.al,*.psgi setf perl
" Perl Reply
au BufNewFile,BufRead .replyrc setf dosini
" Perl, XPM or XPM2
au BufNewFile,BufRead *.pm
\ if getline(1) =~ "XPM2" |
\ setf xpm2 |
\ elseif getline(1) =~ "XPM" |
\ setf xpm |
\ else |
\ setf perl |
\ endif
" Perl POD
au BufNewFile,BufRead *.pod setf pod
" Php, php3, php4, etc.
" Also Phtml (was used for PHP 2 in the past).
" Also .ctp for Cake template file.
" Also .phpt for php tests.
" Also .theme for Drupal theme files.
au BufNewFile,BufRead *.php,*.php\d,*.phtml,*.ctp,*.phpt,*.theme setf php
" PHP config
au BufNewFile,BufRead php.ini-*,php-fpm.conf*,www.conf* setf dosini
" Pike and Cmod
au BufNewFile,BufRead *.pike,*.pmod setf pike
au BufNewFile,BufRead *.cmod setf cmod
" Pinfo config
au BufNewFile,BufRead */etc/pinforc,*/.pinforc setf pinfo
" Palm Resource compiler
au BufNewFile,BufRead *.rcp setf pilrc
" Pine config
au BufNewFile,BufRead .pinerc,pinerc,.pinercex,pinercex setf pine
" Pip requirements
au BufNewFile,BufRead *.pip setf requirements
au BufNewFile,BufRead requirements.txt setf requirements
au BufNewFile,BufRead *-requirements.txt setf requirements
au BufNewFile,BufRead constraints.txt setf requirements
au BufNewFile,BufRead requirements.in setf requirements
au BufNewFile,BufRead requirements/*.txt setf requirements
au BufNewFile,BufRead requires/*.txt setf requirements
" Pipenv Pipfiles
au BufNewFile,BufRead Pipfile setf toml
au BufNewFile,BufRead Pipfile.lock setf json
" Pixi lock
au BufNewFile,BufRead pixi.lock setf yaml
" PL/1, PL/I
au BufNewFile,BufRead *.pli,*.pl1 setf pli
" PL/M (also: *.inp)
au BufNewFile,BufRead *.plm,*.p36,*.pac setf plm
" PL/SQL
au BufNewFile,BufRead *.pls,*.plsql setf plsql
" PLP
au BufNewFile,BufRead *.plp setf plp
" PO and PO template (GNU gettext)
au BufNewFile,BufRead *.po,*.pot setf po
" Pony
au BufNewFile,BufRead *.pony setf pony
" Postfix main config
au BufNewFile,BufRead main.cf,main.cf.proto setf pfmain
" PostScript (+ font files, encapsulated PostScript, Adobe Illustrator)
au BufNewFile,BufRead *.ps,*.pfa,*.afm,*.eps,*.epsf,*.epsi,*.ai setf postscr
" PostScript Printer Description
au BufNewFile,BufRead *.ppd setf ppd
" Povray
au BufNewFile,BufRead *.pov setf pov
" Povray configuration
au BufNewFile,BufRead .povrayrc setf povini
" Povray, Pascal, PHP or assembly
au BufNewFile,BufRead *.inc call dist#ft#FTinc()
" PowerShell
au BufNewFile,BufRead *.ps1,*.psd1,*.psm1,*.pssc setf ps1
au BufNewFile,BufRead *.ps1xml setf ps1xml
au BufNewFile,BufRead *.cdxml,*.psc1 setf xml
" Printcap and Termcap
au BufNewFile,BufRead *printcap
\ let b:ptcap_type = "print" | setf ptcap
au BufNewFile,BufRead *termcap
\ let b:ptcap_type = "term" | setf ptcap
" Prisma
au BufRead,BufNewFile *.prisma setf prisma
" PPWizard
au BufNewFile,BufRead *.it,*.ih setf ppwiz
" Pug
au BufRead,BufNewFile *.pug setf pug
" Puppet
au BufNewFile,BufRead Puppetfile setf ruby
" Embedded Puppet
au BufNewFile,BufRead *.epp setf epuppet
" Obj 3D file format
" TODO: is there a way to avoid MS-Windows Object files?
au BufNewFile,BufRead *.obj setf obj
" Oracle Pro*C/C++
au BufNewFile,BufRead *.pc setf proc
" Privoxy actions file
au BufNewFile,BufRead *.action setf privoxy
" Procmail
au BufNewFile,BufRead .procmail,.procmailrc setf procmail
" Progress or CWEB
au BufNewFile,BufRead *.w call dist#ft#FTprogress_cweb()
" Progress or assembly or Swig
au BufNewFile,BufRead *.i call dist#ft#FTi()
" Progress or Pascal
au BufNewFile,BufRead *.p call dist#ft#FTprogress_pascal()
" Software Distributor Product Specification File (POSIX 1387.2-1995)
au BufNewFile,BufRead *.psf setf psf
au BufNewFile,BufRead INDEX,INFO
\ if getline(1) =~ '^\s*\(distribution\|installed_software\|root\|bundle\|product\)\s*$' |
\ setf psf |
\ endif
" Prolog
au BufNewFile,BufRead *.pdb setf prolog
" Promela
au BufNewFile,BufRead *.pml setf promela
" Property Specification Language (PSL)
au BufNewFile,BufRead *.psl setf psl
" Google protocol buffers
au BufNewFile,BufRead *.proto setf proto
au BufNewFile,BufRead *.txtpb,*.textproto,*.textpb,*.pbtxt setf pbtxt
" Poke
au BufNewFile,BufRead *.pk setf poke
" Protocols
au BufNewFile,BufRead */etc/protocols setf protocols
" Nvidia PTX (Parallel Thread Execution)
" See https://docs.nvidia.com/cuda/parallel-thread-execution/
au BufNewFile,BufRead *.ptx setf ptx
" Purescript
au BufNewFile,BufRead *.purs setf purescript
" PyPA manifest files
au BufNewFile,BufRead MANIFEST.in setf pymanifest
" Pyret
au BufNewFile,BufRead *.arr setf pyret
" Pyrex/Cython
au BufNewFile,BufRead *.pyx,*.pyx+,*.pxd,*.pxi setf pyrex
" Python, Python Shell Startup and Python Stub Files
" Quixote (Python-based web framework)
au BufNewFile,BufRead *.py,*.pyw,.pythonstartup,.pythonrc,.python_history,.jline-jython.history setf python
au BufNewFile,BufRead *.ptl,*.pyi,SConstruct setf python
" QL
au BufRead,BufNewFile *.ql,*.qll setf ql
" QML
au BufRead,BufNewFile *.qml,*.qbs setf qml
" QMLdir
au BufRead,BufNewFile qmldir setf qmldir
" Quarto
au BufRead,BufNewFile *.qmd setf quarto
" Racket (formerly detected as "scheme")
au BufNewFile,BufRead *.rkt,*.rktd,*.rktl setf racket
" Radiance
au BufNewFile,BufRead *.rad,*.mat setf radiance
" Raku (formerly Perl6)
au BufNewFile,BufRead *.pm6,*.p6,*.t6,*.pod6,*.raku,*.rakumod,*.rakudoc,*.rakutest setf raku
" Ratpoison config/command files
au BufNewFile,BufRead .ratpoisonrc,ratpoisonrc setf ratpoison
" RCS file
au BufNewFile,BufRead *\,v setf rcs
" Readline
au BufNewFile,BufRead .inputrc,inputrc setf readline
" Registry for MS-Windows
au BufNewFile,BufRead *.reg
\ if getline(1) =~? '^REGEDIT[0-9]*\s*$\|^Windows Registry Editor Version \d*\.\d*\s*$' | setf registry | endif
" Renderman Interface Bytestream
au BufNewFile,BufRead *.rib setf rib
" Rego Policy Language
au BufNewFile,BufRead *.rego setf rego
" Rexx
au BufNewFile,BufRead *.rex,*.orx,*.rxo,*.rxj,*.jrexx,*.rexxj,*.rexx,*.testGroup,*.testUnit setf rexx
" Ripgrep rc
au BufNewFile,BufRead {.,}ripgreprc setf conf
" R Help file
if has("fname_case")
au BufNewFile,BufRead *.rd,*.Rd setf rhelp
else
au BufNewFile,BufRead *.rd setf rhelp
endif
" R noweb file
if has("fname_case")
au BufNewFile,BufRead *.Rnw,*.rnw,*.Snw,*.snw setf rnoweb
else
au BufNewFile,BufRead *.rnw,*.snw setf rnoweb
endif
" R Markdown file
if has("fname_case")
au BufNewFile,BufRead *.Rmd,*.rmd,*.Smd,*.smd setf rmd
else
au BufNewFile,BufRead *.rmd,*.smd setf rmd
endif
" R profile file
au BufNewFile,BufRead .Rhistory,.Rprofile,Rprofile,Rprofile.site setf r
" RSS looks like XML
au BufNewFile,BufRead *.rss setf xml
" R reStructuredText file
if has("fname_case")
au BufNewFile,BufRead *.Rrst,*.rrst,*.Srst,*.srst setf rrst
else
au BufNewFile,BufRead *.rrst,*.srst setf rrst
endif
" Rexx, Rebol or R
au BufNewFile,BufRead *.r,*.R call dist#ft#FTr()
" Remind
au BufNewFile,BufRead .reminders,*.remind,*.rem setf remind
" ReScript
au BufNewFile,BufRead *.res,*.resi setf rescript
" Resolv.conf
au BufNewFile,BufRead resolv.conf setf resolv
" Relax NG Compact
au BufNewFile,BufRead *.rnc setf rnc
" Relax NG XML
au BufNewFile,BufRead *.rng setf rng
" ILE RPG
au BufNewFile,BufRead *.rpgle,*.rpgleinc setf rpgle
" RPL/2
au BufNewFile,BufRead *.rpl setf rpl
" Robot Framework
au BufNewFile,BufRead *.robot,*.resource setf robot
" Robots.txt
au BufNewFile,BufRead robots.txt setf robots
" Roc
au BufNewFile,BufRead *.roc setf roc
" RON (Rusty Object Notation)
au BufNewFile,BufRead *.ron setf ron
" MikroTik RouterOS script
au BufRead,BufNewFile *.rsc setf routeros
" Rpcgen
au BufNewFile,BufRead *.x setf rpcgen
" reStructuredText Documentation Format
au BufNewFile,BufRead *.rst setf rst
" RTF
au BufNewFile,BufRead *.rtf setf rtf
" Interactive Ruby shell
au BufNewFile,BufRead .irbrc,irbrc,.irb_history,irb_history setf ruby
" Ruby
au BufNewFile,BufRead *.rb,*.rbw setf ruby
" RubyGems
au BufNewFile,BufRead *.gemspec setf ruby
" RBS (Ruby Signature)
au BufNewFile,BufRead *.rbs setf rbs
" Rackup
au BufNewFile,BufRead *.ru setf ruby
" Bundler
au BufNewFile,BufRead Gemfile setf ruby
" Ruby on Rails
au BufNewFile,BufRead *.builder,*.rxml,*.rjs setf ruby
" Rantfile and Rakefile is like Ruby
au BufNewFile,BufRead [rR]antfile,*.rant,[rR]akefile,*.rake setf ruby
" Rust
au BufNewFile,BufRead *.rs setf rust
au BufNewFile,BufRead Cargo.lock,*/.cargo/config,*/.cargo/credentials setf toml
" S-lang
au BufNewFile,BufRead *.sl setf slang
" Sage
au BufNewFile,BufRead *.sage setf sage
" Samba config
au BufNewFile,BufRead smb.conf setf samba
" SAS script
au BufNewFile,BufRead *.sas setf sas
" Sass
au BufNewFile,BufRead *.sass setf sass
" Sather, TI linear assembly
au BufNewFile,BufRead *.sa call dist#ft#FTsa()
" Scala
au BufNewFile,BufRead *.scala,*.mill setf scala
" SBT - Scala Build Tool
au BufNewFile,BufRead *.sbt setf sbt
" Slang Shading Language
au BufNewFile,BufRead *.slang setf shaderslang
" Slint
au BufNewFile,BufRead *.slint setf slint
" SuperCollider
au BufNewFile,BufRead *.sc call dist#ft#FTsc()
au BufNewFile,BufRead *.quark setf supercollider
" scdoc
au BufNewFile,BufRead *.scd call dist#ft#FTscd()
" Scilab
au BufNewFile,BufRead *.sci,*.sce setf scilab
" SCSS
au BufNewFile,BufRead *.scss setf scss
" SD: Streaming Descriptors
au BufNewFile,BufRead *.sd setf sd
" SDL
au BufNewFile,BufRead *.sdl,*.pr setf sdl
" sed
au BufNewFile,BufRead *.sed setf sed
" SubRip
au BufNewFile,BufRead *.srt setf srt
" SubStation Alpha
au BufNewFile,BufRead *.ass,*.ssa setf ssa
" svelte
au BufNewFile,BufRead *.svelte setf svelte
" Sieve (RFC 3028, 5228)
au BufNewFile,BufRead *.siv,*.sieve setf sieve
" Sendmail
au BufNewFile,BufRead sendmail.cf setf sm
" Sendmail .mc files are actually m4. Could also be MS Message text file or
" Maxima.
au BufNewFile,BufRead *.mc call dist#ft#McSetf()
" Services
au BufNewFile,BufRead */etc/services setf services
" Service Location config
au BufNewFile,BufRead */etc/slp.conf setf slpconf
" Service Location registration
au BufNewFile,BufRead */etc/slp.reg setf slpreg
" Service Location SPI
au BufNewFile,BufRead */etc/slp.spi setf slpspi
" Setserial config
au BufNewFile,BufRead */etc/serial.conf setf setserial
" SGML
au BufNewFile,BufRead *.sgm,*.sgml
\ if getline(1).getline(2).getline(3).getline(4).getline(5) =~? 'linuxdoc' |
\ setf sgmllnx |
\ elseif getline(1) =~ '<!DOCTYPE.*DocBook' || getline(2) =~ '<!DOCTYPE.*DocBook' |
\ let b:docbk_type = "sgml" |
\ let b:docbk_ver = 4 |
\ setf docbk |
\ else |
\ setf sgml |
\ endif
" SGMLDECL
au BufNewFile,BufRead *.decl,*.dcl,*.dec
\ if getline(1).getline(2).getline(3) =~? '^<!SGML' |
\ setf sgmldecl |
\ endif
" SGML catalog file
au BufNewFile,BufRead catalog setf catalog
" Shell scripts (sh, ksh, bash, bash2, csh); Allow .profile_foo etc.
" Gentoo ebuilds and Arch Linux PKGBUILDs are actually bash scripts.
" NOTE: Patterns ending in a star are further down, these have lower priority.
au BufNewFile,BufRead .bashrc,bashrc,bash.bashrc,.bash[_-]profile,.bash[_-]logout,.bash[_-]aliases,.bash[_-]history,bash-fc[-.],*.ebuild,*.bash,*.eclass,PKGBUILD,*.bats,*.cygport call dist#ft#SetFileTypeSH("bash")
au BufNewFile,BufRead .kshrc,*.ksh call dist#ft#SetFileTypeSH("ksh")
au BufNewFile,BufRead */etc/profile,.profile,*.sh,*.env{rc,} call dist#ft#SetFileTypeSH(getline(1))
" Alpine Linux APKBUILDs are actually POSIX sh scripts with special treatment.
au BufNewFile,BufRead APKBUILD setf apkbuild
" Shell script (Arch Linux) or PHP file (Drupal)
au BufNewFile,BufRead *.install
\ if getline(1) =~ '<?php' |
\ setf php |
\ else |
\ call dist#ft#SetFileTypeSH("bash") |
\ endif
" tcsh scripts (patterns ending in a star further below)
au BufNewFile,BufRead .tcshrc,*.tcsh,tcsh.tcshrc,tcsh.login call dist#ft#SetFileTypeShell("tcsh")
" csh scripts, but might also be tcsh scripts (on some systems csh is tcsh)
" (patterns ending in a start further below)
au BufNewFile,BufRead .login,.cshrc,csh.cshrc,csh.login,csh.logout,*.csh,.alias call dist#ft#CSH()
" TriG
au BufNewFile,BufRead *.trig setf trig
" Zig and Zig Object Notation (ZON)
au BufNewFile,BufRead *.zig,*.zon setf zig
" Ziggy and Ziggy Schema
au BufNewFile,BufRead *.ziggy setf ziggy
au BufNewFile,BufRead *.ziggy-schema setf ziggy_schema
" Zserio
au BufNewFile,BufRead *.zs setf zserio
" Z-Shell script (patterns ending in a star further below)
au BufNewFile,BufRead .zprofile,*/etc/zprofile,.zfbfmarks setf zsh
au BufNewFile,BufRead .zshrc,.zshenv,.zlogin,.zlogout,.zcompdump,.zsh_history setf zsh
au BufNewFile,BufRead *.zsh,*.zsh-theme,*.zunit setf zsh
" Salt state files
au BufNewFile,BufRead *.sls setf salt
" Scheme, Supertux configuration, Lips.js history, Guile init file ("racket" patterns are now separate, see above)
au BufNewFile,BufRead *.scm,*.ss,*.sld,*.stsg,*/supertux2/config,.lips_repl_history,.guile setf scheme
" Screen RC
au BufNewFile,BufRead .screenrc,screenrc setf screen
" Sexplib
au BufNewFile,BufRead *.sexp setf sexplib
" Simula
au BufNewFile,BufRead *.sim setf simula
" SINDA
au BufNewFile,BufRead *.sin,*.s85 setf sinda
" SiSU
au BufNewFile,BufRead *.sst,*.ssm,*.ssi,*.-sst,*._sst setf sisu
au BufNewFile,BufRead *.sst.meta,*.-sst.meta,*._sst.meta setf sisu
" SKILL
au BufNewFile,BufRead *.il,*.ils,*.cdf setf skill
" Cadence
au BufNewFile,BufRead *.cdc setf cdc
" SLRN
au BufNewFile,BufRead .slrnrc setf slrnrc
au BufNewFile,BufRead *.score setf slrnsc
" Smali
au BufNewFile,BufRead *.smali setf smali
" Smalltalk
au BufNewFile,BufRead *.st setf st
" Smalltalk (and Rexx, TeX, and Visual Basic)
au BufNewFile,BufRead *.cls call dist#ft#FTcls()
" Smarty templates
au BufNewFile,BufRead *.tpl setf smarty
" SMIL or XML
au BufNewFile,BufRead *.smil
\ if getline(1) =~ '<?\s*xml.*?>' |
\ setf xml |
\ else |
\ setf smil |
\ endif
" SMIL or SNMP MIB file
au BufNewFile,BufRead *.smi
\ if getline(1) =~ '\<smil\>' |
\ setf smil |
\ else |
\ setf mib |
\ endif
" SMITH
au BufNewFile,BufRead *.smt,*.smith setf smith
" Smithy
au BufNewFile,BufRead *.smithy setf smithy
" Snakemake
au BufNewFile,BufRead Snakefile,*.smk setf snakemake
" Snobol4 and spitbol
au BufNewFile,BufRead *.sno,*.spt setf snobol4
" SNMP MIB files
au BufNewFile,BufRead *.mib,*.my setf mib
" Snort Configuration
au BufNewFile,BufRead *.hog,snort.conf,vision.conf setf hog
au BufNewFile,BufRead *.rules call dist#ft#FTRules()
" Solidity
au BufRead,BufNewFile *.sol setf solidity
" SPARQL queries
au BufNewFile,BufRead *.rq,*.sparql setf sparql
" Spec (Linux RPM)
au BufNewFile,BufRead *.spec setf spec
" Speedup (AspenTech plant simulator)
au BufNewFile,BufRead *.speedup,*.spdata,*.spd setf spup
" Slice
au BufNewFile,BufRead *.ice setf slice
" Microsoft Visual Studio Solution
au BufNewFile,BufRead *.sln setf solution
au BufNewFile,BufRead *.slnf setf json
au BufNewFile,BufRead *.slnx setf xml
" Spice
au BufNewFile,BufRead *.sp,*.spice setf spice
" Spyce
au BufNewFile,BufRead *.spy,*.spi setf spyce
" Squid
au BufNewFile,BufRead squid.conf setf squid
" SQL for Oracle Designer
au BufNewFile,BufRead *.tyb,*.tyc,*.pkb,*.pks setf sql
" *.typ can be either SQL or Typst files
au BufNewFile,BufRead *.typ call dist#ft#FTtyp()
" SQL
au BufNewFile,BufRead *.sql call dist#ft#SQL()
au BufNewFile,BufRead .sqlite_history setf sql
" SQLJ
au BufNewFile,BufRead *.sqlj setf sqlj
" PRQL
au BufNewFile,BufRead *.prql setf prql
" SQR
au BufNewFile,BufRead *.sqr,*.sqi setf sqr
" Squirrel
au BufNewFile,BufRead *.nut setf squirrel
" OpenSSH configuration
au BufNewFile,BufRead ssh_config,*/.ssh/config,*/.ssh/*.conf setf sshconfig
au BufNewFile,BufRead */etc/ssh/ssh_config.d/*.conf setf sshconfig
" OpenSSH server configuration
au BufNewFile,BufRead sshd_config setf sshdconfig
au BufNewFile,BufRead */etc/ssh/sshd_config.d/*.conf setf sshdconfig
" Starlark
au BufNewFile,BufRead *.ipd,*.star,*.starlark setf starlark
" OpenVPN configuration
au BufNewFile,BufRead *.ovpn setf openvpn
au BufNewFile,BufRead */openvpn/*/*.conf setf openvpn
" Stata
au BufNewFile,BufRead *.ado,*.do,*.imata,*.mata setf stata
" Also *.class, but not when it's a Java bytecode file
au BufNewFile,BufRead *.class
\ if getline(1) !~ "^\xca\xfe\xba\xbe" | setf stata | endif
" SMCL
au BufNewFile,BufRead *.hlp,*.ihlp,*.smcl setf smcl
" Stored Procedures
au BufNewFile,BufRead *.stp setf stp
" Standard ML
au BufNewFile,BufRead *.sml setf sml
" Sratus VOS command macro
au BufNewFile,BufRead *.cm setf voscm
" Sway (programming language)
au BufNewFile,BufRead *.sw setf sway
" Swift
au BufNewFile,BufRead *.swift,*.swiftinterface setf swift
au BufNewFile,BufRead *.swift.gyb setf swiftgyb
" Swift Intermediate Language or SILE
au BufNewFile,BufRead *.sil call dist#ft#FTsil()
" Swig
au BufNewFile,BufRead *.swg,*.swig setf swig
" Sysctl
au BufNewFile,BufRead */etc/sysctl.conf,*/etc/sysctl.d/*.conf setf sysctl
" Systemd unit files
au BufNewFile,BufRead */systemd/*.{automount,dnssd,link,mount,netdev,network,nspawn,path,service,slice,socket,swap,target,timer} setf systemd
" Systemd overrides
au BufNewFile,BufRead */etc/systemd/*.conf.d/*.conf setf systemd
au BufNewFile,BufRead */etc/systemd/system/*.d/*.conf setf systemd
au BufNewFile,BufRead */.config/systemd/user/*.d/*.conf setf systemd
" Systemd temp files
au BufNewFile,BufRead */etc/systemd/system/*.d/.#* setf systemd
au BufNewFile,BufRead */etc/systemd/system/.#* setf systemd
au BufNewFile,BufRead */.config/systemd/user/*.d/.#* setf systemd
au BufNewFile,BufRead */.config/systemd/user/.#* setf systemd
" Synopsys Design Constraints
au BufNewFile,BufRead *.sdc setf sdc
" Sudoers
au BufNewFile,BufRead */etc/sudoers,sudoers.tmp setf sudoers
" SVG (Scalable Vector Graphics)
au BufNewFile,BufRead *.svg setf svg
" Surface
au BufRead,BufNewFile *.sface setf surface
" LLVM TableGen
au BufNewFile,BufRead *.td setf tablegen
" Tads (or Nroff or Perl test file)
au BufNewFile,BufRead *.t
\ if !dist#ft#FTnroff() && !dist#ft#FTperl() | setf tads | endif
" Tags
au BufNewFile,BufRead tags setf tags
" TAK
au BufNewFile,BufRead *.tak setf tak
" Unx Tal
au BufNewFile,BufRead *.tal setf tal
" Task
au BufRead,BufNewFile {pending,completed,undo}.data setf taskdata
au BufRead,BufNewFile *.task setf taskedit
" Tcl (JACL too)
au BufNewFile,BufRead *.tcl,*.tm,*.tk,*.itcl,*.itk,*.jacl,.tclshrc,.wishrc,.tclsh-history setf tcl
" Xilinx's xsct and xsdb use tcl
au BufNewFile,BufRead .xsctcmdhistory,.xsdbcmdhistory setf tcl
" templ
au BufNewFile,BufRead *.templ setf templ
" Teal
au BufRead,BufNewFile *.tl setf teal
" TealInfo
au BufNewFile,BufRead *.tli setf tli
" Telix Salt
au BufNewFile,BufRead *.slt setf tsalt
" Tera Term Language or Turtle
au BufRead,BufNewFile *.ttl
\ if getline(1) =~ '^@\?\(prefix\|base\)' |
\ setf turtle |
\ else |
\ setf teraterm |
\ endif
" Terminfo
au BufNewFile,BufRead *.ti setf terminfo
" Tera
au BufRead,BufNewFile *.tera setf tera
" Terraform variables
au BufRead,BufNewFile *.tfvars setf terraform-vars
" TeX
au BufNewFile,BufRead *.latex,*.sty,*.dtx,*.ltx,*.bbl setf tex
au BufNewFile,BufRead *.tex call dist#ft#FTtex()
au BufNewFile,BufRead texdoc.cnf setf conf
" LaTeX packages will generate some medium LaTeX files during compiling
" They should be ignored by .gitignore https://github.com/github/gitignore/blob/main/TeX.gitignore
" Sometime we need to view its content for debugging
au BufNewFile,BufRead *.{pgf,nlo,nls,thm,eps_tex,pygtex,pygstyle,clo,aux,brf,ind,lof,loe,nav,vrb,ins,tikz,bbx,cbx,beamer} setf tex
" LaTeX files generated by Inkscape
au BufNewFile,BufRead *.pdf_tex setf tex
" ConTeXt
au BufNewFile,BufRead *.mkii,*.mkiv,*.mkvi,*.mkxl,*.mklx setf context
" Texinfo
au BufNewFile,BufRead *.texinfo,*.texi,*.txi setf texinfo
" TeX configuration
au BufNewFile,BufRead texmf.cnf setf texmf
" Thrift (Apache)
au BufNewFile,BufRead *.thrift setf thrift
" Tidy config
au BufNewFile,BufRead .tidyrc,tidyrc,tidy.conf setf tidy
" TF (TinyFugue) mud client
au BufNewFile,BufRead .tfrc,tfrc setf tf
" TF (TinyFugue) mud client or terraform
au BufNewFile,BufRead *.tf call dist#ft#FTtf()
" TLA+
au BufNewFile,BufRead *.tla setf tla
" tmux configuration
au BufNewFile,BufRead {.,}tmux*.conf setf tmux
" TOML
au BufNewFile,BufRead *.toml setf toml
" TPP - Text Presentation Program
au BufNewFile,BufRead *.tpp setf tpp
" TRACE32 Script Language
au BufNewFile,BufRead *.cmm,*.cmmt,*.t32 setf trace32
" Treetop
au BufRead,BufNewFile *.treetop setf treetop
" Trustees
au BufNewFile,BufRead trustees.conf setf trustees
" TSS - Geometry
au BufNewFile,BufReadPost *.tssgm setf tssgm
" TSS - Optics
au BufNewFile,BufReadPost *.tssop setf tssop
" TSS - Command Line (temporary)
au BufNewFile,BufReadPost *.tsscl setf tsscl
" TSV Files
au BufNewFile,BufRead *.tsv setf tsv
" Tutor mode
au BufNewFile,BufReadPost *.tutor setf tutor
" TWIG files
au BufNewFile,BufReadPost *.twig setf twig
" TypeScript or Qt translation file (which is XML)
au BufNewFile,BufReadPost *.ts
\ if getline(1) =~ '<?xml' |
\ setf xml |
\ else |
\ setf typescript |
\ endif
au BufNewFile,BufRead .ts_node_repl_history setf typescript
" TypeScript module and common
au BufNewFile,BufRead *.mts,*.cts setf typescript
" TypeScript with React
au BufNewFile,BufRead *.tsx setf typescriptreact
" TypeSpec files
au BufNewFile,BufRead *.tsp setf typespec
" Motif UIT/UIL files
au BufNewFile,BufRead *.uit,*.uil setf uil
" Udev conf
au BufNewFile,BufRead */etc/udev/udev.conf setf udevconf
" Udev permissions
au BufNewFile,BufRead */etc/udev/permissions.d/*.permissions setf udevperm
"
" Udev symlinks config
au BufNewFile,BufRead */etc/udev/cdsymlinks.conf setf sh
" Ungrammar, AKA Un-grammar
au BufNewFile,BufRead *.ungram setf ungrammar
" UnrealScript
au BufNewFile,BufRead *.uc setf uc
" Updatedb
au BufNewFile,BufRead */etc/updatedb.conf setf updatedb
" Upstart (init(8)) config files
au BufNewFile,BufRead */usr/share/upstart/*.conf setf upstart
au BufNewFile,BufRead */usr/share/upstart/*.override setf upstart
au BufNewFile,BufRead */etc/init/*.conf,*/etc/init/*.override setf upstart
au BufNewFile,BufRead */.init/*.conf,*/.init/*.override setf upstart
au BufNewFile,BufRead */.config/upstart/*.conf setf upstart
au BufNewFile,BufRead */.config/upstart/*.override setf upstart
" URL shortcut
au BufNewFile,BufRead *.url setf urlshortcut
" V
au BufNewFile,BufRead *.vsh,*.vv setf v
" Vala
au BufNewFile,BufRead *.vala setf vala
" VDF
au BufNewFile,BufRead *.vdf setf vdf
" VDM
au BufRead,BufNewFile *.vdmpp,*.vpp setf vdmpp
au BufRead,BufNewFile *.vdmrt setf vdmrt
au BufRead,BufNewFile *.vdmsl,*.vdm setf vdmsl
" Vento
au BufNewFile,BufRead *.vto setf vento
" Vera
au BufNewFile,BufRead *.vr,*.vri,*.vrh setf vera
" Vagrant (uses Ruby syntax)
au BufNewFile,BufRead Vagrantfile setf ruby
" Verilog HDL, V or Coq
au BufNewFile,BufRead *.v call dist#ft#FTv()
" Verilog-AMS HDL
au BufNewFile,BufRead *.va,*.vams setf verilogams
" SystemVerilog
au BufNewFile,BufRead *.sv,*.svh setf systemverilog
" VHS tape
" .tape is also used by TapeCalc, which we do not support ATM. If TapeCalc
" support is needed the contents of the file needs to be inspected.
au BufNewFile,BufRead *.tape setf vhs
" VHDL
au BufNewFile,BufRead *.hdl,*.vhd,*.vhdl,*.vbe,*.vst,*.vho setf vhdl
" Vim script
au BufNewFile,BufRead *.vim,.exrc,_exrc,.netrwhist setf vim
" Viminfo file
au BufNewFile,BufRead .viminfo,_viminfo setf viminfo
" Virata Config Script File or Drupal module
au BufRead,BufNewFile *.hw,*.module,*.pkg
\ if getline(1) =~ '<?php' |
\ setf php |
\ else |
\ setf virata |
\ endif
" Visual Basic (see also *.bas *.cls)
" Visual Basic or FORM
au BufNewFile,BufRead *.frm call dist#ft#FTfrm()
" Visual Basic
" user control, ActiveX document form, active designer, property page
au BufNewFile,BufRead *.ctl,*.dob,*.dsr,*.pag setf vb
" Visual Basic or Vimball Archiver
au BufNewFile,BufRead *.vba call dist#ft#FTvba()
" Visual Basic Project
au BufNewFile,BufRead *.vbp setf dosini
" VBScript (close to Visual Basic)
au BufNewFile,BufRead *.vbs setf vb
" Visual Basic .NET (close to Visual Basic)
au BufNewFile,BufRead *.vb setf vb
" Visual Studio Macro
au BufNewFile,BufRead *.dsm setf vb
" SaxBasic (close to Visual Basic)
au BufNewFile,BufRead *.sba setf vb
" Vgrindefs file
au BufNewFile,BufRead vgrindefs setf vgrindefs
" VRML V1.0c
au BufNewFile,BufRead *.wrl setf vrml
" Vroom (vim testing and executable documentation)
au BufNewFile,BufRead *.vroom setf vroom
" Vue.js Single File Component
au BufNewFile,BufRead *.vue setf vue
" WebAssembly
au BufNewFile,BufRead *.wat,*.wast setf wat
" WebAssembly Interface Type (WIT)
au BufNewFile,BufRead *.wit setf wit
" Webmacro
au BufNewFile,BufRead *.wm setf webmacro
" Wget config
au BufNewFile,BufRead .wgetrc,wgetrc setf wget
" Wget2 config
au BufNewFile,BufRead .wget2rc,wget2rc setf wget2
" WebGPU Shading Language (WGSL)
au BufNewFile,BufRead *.wgsl setf wgsl
" Website MetaLanguage
au BufNewFile,BufRead *.wml setf wml
" Winbatch
au BufNewFile,BufRead *.wbt setf winbatch
" WSML
au BufNewFile,BufRead *.wsml setf wsml
" WPL
au BufNewFile,BufRead *.wpl setf xml
" WvDial
au BufNewFile,BufRead wvdial.conf,.wvdialrc setf wvdial
" CVS RC file
au BufNewFile,BufRead .cvsrc setf cvsrc
" CVS commit file
au BufNewFile,BufRead cvs\d\+ setf cvs
" WEB (*.web is also used for Winbatch: Guess, based on expecting "%" comment
" lines in a WEB file).
au BufNewFile,BufRead *.web
\ if getline(1)[0].getline(2)[0].getline(3)[0].getline(4)[0].getline(5)[0] =~ "%" |
\ setf web |
\ else |
\ setf winbatch |
\ endif
" Windows Scripting Host and Windows Script Component
au BufNewFile,BufRead *.ws[fc] setf wsh
" Xdg-user-dirs
au BufNewFile,BufRead user-dirs.dirs,user-dirs.defaults setf sh
" XHTML
au BufNewFile,BufRead *.xhtml,*.xht setf xhtml
" X11vnc
au BufNewFile,BufRead .x11vncrc setf conf
" Xprofile
au BufNewFile,BufRead .xprofile setf sh
" X Pixmap (dynamically sets colors, this used to trigger on BufEnter to make
" it work better, but that breaks setting 'filetype' manually)
au BufNewFile,BufRead *.xpm
\ if getline(1) =~ "XPM2" |
\ setf xpm2 |
\ else |
\ setf xpm |
\ endif
au BufNewFile,BufRead *.xpm2 setf xpm2
" XFree86 config
au BufNewFile,BufRead XF86Config
\ if getline(1) =~ '\<XConfigurator\>' |
\ let b:xf86conf_xfree86_version = 3 |
\ endif |
\ setf xf86conf
au BufNewFile,BufRead */xorg.conf.d/*.conf
\ let b:xf86conf_xfree86_version = 4 |
\ setf xf86conf
" Xorg config
au BufNewFile,BufRead xorg.conf,xorg.conf-4 let b:xf86conf_xfree86_version = 4 | setf xf86conf
" Xinetd conf
au BufNewFile,BufRead */etc/xinetd.conf setf xinetd
" Xilinx Vivado/Vitis project files and block design files
au BufNewFile,BufRead *.xpr,*.xpfm,*.spfm,*.bxml,*.mmi setf xml
au BufNewFile,BufRead *.bd,*.bda,*.xci setf json
au BufNewFile,BufRead *.mss setf mss
" XS Perl extension interface language
au BufNewFile,BufRead *.xs setf xs
" X compose file
au BufNewFile,BufRead .XCompose,Compose setf xcompose
" X resources file
au BufNewFile,BufRead .Xdefaults,.Xpdefaults,.Xresources,xdm-config,*.ad setf xdefaults
" Xmath
au BufNewFile,BufRead *.msc,*.msf setf xmath
au BufNewFile,BufRead *.ms
\ if !dist#ft#FTnroff() | setf xmath | endif
" XML specific variants: docbk and xbl
au BufNewFile,BufRead *.xml call dist#ft#FTxml()
" XMI (holding UML models) is also XML
au BufNewFile,BufRead *.xmi setf xml
" CSPROJ files are Visual Studio.NET's XML-based C# project config files
au BufNewFile,BufRead *.csproj,*.csproj.user setf xml
" FSPROJ files are Visual Studio.NET's XML-based F# project config files
au BufNewFile,BufRead *.fsproj,*.fsproj.user setf xml
" VBPROJ files are Visual Studio.NET's XML-based Visual Basic project config files
au BufNewFile,BufRead *.vbproj,*.vbproj.user setf xml
" MSBUILD configuration files are also XML
au BufNewFile,BufRead Directory.Packages.props,Directory.Build.targets,Directory.Build.props setf xml
" Unison Language
au BufNewFile,BufRead *.u,*.uu setf unison
" Qt Linguist translation source and Qt User Interface Files are XML
" However, for .ts TypeScript is more common.
au BufNewFile,BufRead *.ui setf xml
" TPM's are RDF-based descriptions of TeX packages (Nikolai Weibull)
au BufNewFile,BufRead *.tpm setf xml
" Xdg menus
au BufNewFile,BufRead */etc/xdg/menus/*.menu setf xml
" ATI graphics driver configuration
au BufNewFile,BufRead fglrxrc setf xml
" Web Services Description Language (WSDL)
au BufNewFile,BufRead *.wsdl setf xml
" Workflow Description Language (WDL)
au BufNewFile,BufRead *.wdl setf wdl
" XLIFF (XML Localisation Interchange File Format) is also XML
au BufNewFile,BufRead *.xlf setf xml
au BufNewFile,BufRead *.xliff setf xml
" XML User Interface Language
au BufNewFile,BufRead *.xul setf xml
" X11 xmodmap (also see below)
au BufNewFile,BufRead *Xmodmap setf xmodmap
" Xquery
au BufNewFile,BufRead *.xq,*.xql,*.xqm,*.xquery,*.xqy setf xquery
" XSD
au BufNewFile,BufRead *.xsd setf xsd
" Xslt
au BufNewFile,BufRead *.xsl,*.xslt setf xslt
" Yacc
au BufNewFile,BufRead *.yy,*.yxx,*.y++ setf yacc
" Yacc or racc
au BufNewFile,BufRead *.y call dist#ft#FTy()
" Yaml
au BufNewFile,BufRead *.yaml,*.yml,*.eyaml setf yaml
au BufNewFile,BufRead */.kube/config setf yaml
" Raml
au BufNewFile,BufRead *.raml setf raml
" yum conf (close enough to dosini)
au BufNewFile,BufRead */etc/yum.conf setf dosini
" YANG
au BufRead,BufNewFile *.yang setf yang
" Yuck
au BufNewFile,BufRead *.yuck setf yuck
" Zimbu
au BufNewFile,BufRead *.zu setf zimbu
" Zimbu Templates
au BufNewFile,BufRead *.zut setf zimbutempl
" Zope
" dtml (zope dynamic template markup language), pt (zope page template),
" cpt (zope form controller page template)
au BufNewFile,BufRead *.dtml,*.pt,*.cpt call dist#ft#FThtml()
" zsql (zope sql method)
au BufNewFile,BufRead *.zsql call dist#ft#SQL()
" Z80 assembler asz80
au BufNewFile,BufRead *.z8a setf z8a
augroup END
" Source the user-specified filetype file, for backwards compatibility with
" Vim 5.x.
if exists("myfiletypefile") && filereadable(expand(myfiletypefile))
execute "source " . myfiletypefile
endif
" Check for "*" after loading myfiletypefile, so that scripts.vim is only used
" when there are no matching file name extensions.
" Don't do this for compressed files.
augroup filetypedetect
au BufNewFile,BufRead *
\ if !did_filetype() && expand("<amatch>") !~ g:ft_ignore_pat
\ | runtime! scripts.vim | endif
au StdinReadPost * if !did_filetype() | runtime! scripts.vim | endif
" Plain text files, needs to be far down to not override others. This avoids
" the "conf" type being used if there is a line starting with '#'.
" But before patterns matching everything in a directory.
au BufNewFile,BufRead *.text,README,LICENSE,COPYING,AUTHORS setf text
" What should *.out files be? Text?
" Disabled until it is clear, to what this should be set
"au BufNewFile,BufRead *.out setf text
" Extra checks for when no filetype has been detected now. Mostly used for
" patterns that end in "*". E.g., "zsh*" matches "zsh.vim", but that's a Vim
" script file.
" Most of these should call s:StarSetf() to avoid names ending in .gz and the
" like are used.
" More Apache style config files
au BufNewFile,BufRead */etc/proftpd/*.conf*,*/etc/proftpd/conf.*/* call s:StarSetf('apachestyle')
au BufNewFile,BufRead proftpd.conf* call s:StarSetf('apachestyle')
" More Apache config files
au BufNewFile,BufRead access.conf*,apache.conf*,apache2.conf*,httpd.conf*,httpd-*.conf*,srm.conf*,proxy-html.conf* call s:StarSetf('apache')
au BufNewFile,BufRead */etc/apache2/*.conf*,*/etc/apache2/conf.*/*,*/etc/apache2/mods-*/*,*/etc/apache2/sites-*/*,*/etc/httpd/conf.*/*,*/etc/httpd/mods-*/*,*/etc/httpd/sites-*/*,*/etc/httpd/conf.d/*.conf* call s:StarSetf('apache')
" APT config file
au BufNewFile,BufRead */etc/apt/apt.conf.d/{[-_[:alnum:]]\+,[-_.[:alnum:]]\+.conf} call s:StarSetf('aptconf')
" Asterisk config file
au BufNewFile,BufRead *asterisk/*.conf* call s:StarSetf('asterisk')
au BufNewFile,BufRead *asterisk*/*voicemail.conf* call s:StarSetf('asteriskvm')
" Bazaar version control
au BufNewFile,BufRead bzr_log.* setf bzr
" Bazel and Buck2 build file
if !has("fname_case")
au BufNewFile,BufRead *.BUILD,BUILD,BUCK setf bzl
endif
" BIND zone
au BufNewFile,BufRead */named/db.*,*/bind/db.* call s:StarSetf('bindzone')
au BufNewFile,BufRead cabal.project.* call s:StarSetf('cabalproject')
" Calendar
au BufNewFile,BufRead */.calendar/*,
\*/share/calendar/*/calendar.*,*/share/calendar/calendar.*
\ call s:StarSetf('calendar')
" Changelog
au BufNewFile,BufRead [cC]hange[lL]og*
\ if getline(1) =~ '; urgency='
\| call s:StarSetf('debchangelog')
\|else
\| call s:StarSetf('changelog')
\|endif
" Crontab
au BufNewFile,BufRead crontab,crontab.*,*/etc/cron.d/* call s:StarSetf('crontab')
" dnsmasq(8) configuration
au BufNewFile,BufRead */etc/dnsmasq.d/* call s:StarSetf('dnsmasq')
" Dockerfile
au BufNewFile,BufRead Dockerfile.*,Containerfile.* call s:StarSetf('dockerfile')
" Dracula
au BufNewFile,BufRead drac.* call s:StarSetf('dracula')
" Fvwm
au BufNewFile,BufRead */.fvwm/* call s:StarSetf('fvwm')
au BufNewFile,BufRead *fvwmrc*,*fvwm95*.hook
\ let b:fvwm_version = 1 | call s:StarSetf('fvwm')
au BufNewFile,BufRead *fvwm2rc*
\ if expand("<afile>:e") == "m4"
\| call s:StarSetf('fvwm2m4')
\|else
\| let b:fvwm_version = 2 | call s:StarSetf('fvwm')
\|endif
" Gedcom
au BufNewFile,BufRead */tmp/lltmp* call s:StarSetf('gedcom')
" Git
au BufNewFile,BufRead */.gitconfig.d/*,*/etc/gitconfig.d/* call s:StarSetf('gitconfig')
" Gitolite
au BufNewFile,BufRead */gitolite-admin/conf/* call s:StarSetf('gitolite')
" GTK RC
au BufNewFile,BufRead .gtkrc*,gtkrc* call s:StarSetf('gtkrc')
" Jam
au BufNewFile,BufRead Prl*.*,JAM*.* call s:StarSetf('jam')
" Jargon
au! BufNewFile,BufRead *jarg*
\ if getline(1).getline(2).getline(3).getline(4).getline(5) =~? 'THIS IS THE JARGON FILE'
\| call s:StarSetf('jargon')
\|endif
" Java Properties resource file (note: doesn't catch font.properties.pl)
au BufNewFile,BufRead *.properties_??_??_* call s:StarSetf('jproperties')
" Kconfig
au BufNewFile,BufRead Kconfig.*,Config.in.* call s:StarSetf('kconfig')
" Lilo: Linux loader
au BufNewFile,BufRead lilo.conf* call s:StarSetf('lilo')
" Libsensors
au BufNewFile,BufRead */etc/sensors.d/[^.]* call s:StarSetf('sensors')
" Logcheck
au BufNewFile,BufRead */etc/logcheck/*.d*/* call s:StarSetf('logcheck')
" Makefile
au BufNewFile,BufRead [mM]akefile* call s:StarSetf('make')
" Ruby Makefile
au BufNewFile,BufRead [rR]akefile* call s:StarSetf('ruby')
" Mail (also matches muttrc.vim, so this is below the other checks)
au BufNewFile,BufRead {neo,}mutt[[:alnum:]._-]\\\{6\} setf mail
au BufNewFile,BufRead reportbug-* call s:StarSetf('mail')
" Modconf
au BufNewFile,BufRead */etc/modutils/*
\ if executable(expand("<afile>")) != 1
\| call s:StarSetf('modconf')
\|endif
au BufNewFile,BufRead */etc/modprobe.* call s:StarSetf('modconf')
" Mutt setup files (must be before catch *.rc)
au BufNewFile,BufRead */etc/Muttrc.d/* call s:StarSetf('muttrc')
" Mutt setup file
au BufNewFile,BufRead .mutt{ng,}rc*,*/.mutt{ng,}/mutt{ng,}rc* call s:StarSetf('muttrc')
au BufNewFile,BufRead mutt{ng,}rc*,Mutt{ng,}rc* call s:StarSetf('muttrc')
" Neomutt setup file
au BufNewFile,BufRead .neomuttrc*,*/.neomutt/neomuttrc* call s:StarSetf('neomuttrc')
au BufNewFile,BufRead neomuttrc*,Neomuttrc* call s:StarSetf('neomuttrc')
" Nfs
au BufNewFile,BufRead nfs.conf,nfsmount.conf setf dosini
" Nroff macros
au BufNewFile,BufRead tmac.* call s:StarSetf('nroff')
" OpenBSD hostname.if
au BufNewFile,BufRead */etc/hostname.* call s:StarSetf('config')
" Pam conf
au BufNewFile,BufRead */etc/pam.d/* call s:StarSetf('pamconf')
" Pandoc
au BufNewFile,BufRead,BufFilePost *.pandoc,*.pdk,*.pd,*.pdc setf pandoc
" Printcap and Termcap
au BufNewFile,BufRead *printcap*
\ if !did_filetype()
\| let b:ptcap_type = "print" | call s:StarSetf('ptcap')
\|endif
au BufNewFile,BufRead *termcap*
\ if !did_filetype()
\| let b:ptcap_type = "term" | call s:StarSetf('ptcap')
\|endif
" ReDIF
" Only used when the .rdf file was not detected to be XML.
au BufRead,BufNewFile *.rdf call dist#ft#Redif()
" Remind
au BufNewFile,BufRead .reminders* call s:StarSetf('remind')
" SGML catalog file
au BufNewFile,BufRead sgml.catalog* call s:StarSetf('catalog')
" Stylus
au BufNewFile,BufReadPost *.styl,*.stylus setf stylus
" avoid doc files being recognized a shell files
au BufNewFile,BufRead */doc/{,.}bash[_-]completion{,.d,.sh}{,/*} setf text
" Shell scripts ending in a star
au BufNewFile,BufRead .bashrc*,.bash[_-]profile*,.bash[_-]logout*,.bash[_-]aliases*,bash-fc[-.]*,PKGBUILD*,APKBUILD*,*/{,.}bash[_-]completion{,.d,.sh}{,/*} call dist#ft#SetFileTypeSH("bash")
au BufNewFile,BufRead .kshrc* call dist#ft#SetFileTypeSH("ksh")
au BufNewFile,BufRead .profile* call dist#ft#SetFileTypeSH(getline(1))
" Sudoers
au BufNewFile,BufRead */etc/sudoers.d/* call s:StarSetf('sudoers')
" tcsh scripts ending in a star
au BufNewFile,BufRead .tcshrc* call dist#ft#SetFileTypeShell("tcsh")
" csh scripts ending in a star
au BufNewFile,BufRead .login*,.cshrc* call dist#ft#CSH()
" tmux configuration with arbitrary extension
au BufNewFile,BufRead {.,}tmux*.conf* setf tmux
" Universal Scene Description
au BufNewFile,BufRead *.usda,*.usd setf usd
" UCI
" UCI files are normally in /etc/config, but that might be mounted over sshfs or similar, so we match more loosely.
" There was some concern[1] that this pattern would match too much, so now we check the file content as well.
" [1]: https://github.com/vim/vim/pull/14385#discussion_r1558878741
au BufNewFile,BufRead */etc/config/* if dist#ft#Detect_UCI_statements() | call s:StarSetf('uci') | endif
" VHDL
au BufNewFile,BufRead *.vhdl_[0-9]* call s:StarSetf('vhdl')
" Vim script
au BufNewFile,BufRead *vimrc* call s:StarSetf('vim')
" Subversion commit file
au BufNewFile,BufRead svn-commit*.tmp setf svn
" X resources file
au BufNewFile,BufRead Xresources*,*/app-defaults/*,*/Xresources/* call s:StarSetf('xdefaults')
" XFree86 config
au BufNewFile,BufRead XF86Config-4*
\ let b:xf86conf_xfree86_version = 4 | call s:StarSetf('xf86conf')
au BufNewFile,BufRead XF86Config*
\ if getline(1) =~ '\<XConfigurator\>'
\| let b:xf86conf_xfree86_version = 3
\|endif
\|call s:StarSetf('xf86conf')
" XKB
au BufNewFile,BufRead */{,.}xkb/{compat,geometry,keycodes,symbols,types}/* call s:StarSetf('xkb')
" X11 xmodmap
au BufNewFile,BufRead *xmodmap* call s:StarSetf('xmodmap')
" Xinetd conf
au BufNewFile,BufRead */etc/xinetd.d/* call s:StarSetf('xinetd')
" yum conf (close enough to dosini)
au BufNewFile,BufRead */etc/yum.repos.d/* call s:StarSetf('dosini')
" Yarn lock
au BufNewFile,BufRead yarn.lock setf yaml
" Zathurarc
au BufNewFile,BufRead zathurarc setf zathurarc
" Rofi stylesheet
au BufNewFile,BufRead *.rasi setf rasi
" Z-Shell script ending in a star
au BufNewFile,BufRead .zsh*,.zlog*,.zcompdump* call s:StarSetf('zsh')
au BufNewFile,BufRead zsh*,zlog* call s:StarSetf('zsh')
" Zsh module
" mdd: https://github.com/zsh-users/zsh/blob/57248b88830ce56adc243a40c7773fb3825cab34/Etc/zsh-development-guide#L285-L288
" mdh, pro: https://github.com/zsh-users/zsh/blob/57248b88830ce56adc243a40c7773fb3825cab34/Etc/zsh-development-guide#L268-L271
" *.mdd will generate *.mdh, *.pro and *.epro.
" module's *.c will #include *.mdh containing module dependency information and
" *.pro containing all static declarations of *.c
" *.epro contains all external declarations of *.c
au BufNewFile,BufRead *.mdh,*.epro setf c
au BufNewFile,BufRead *.mdd setf sh
" Help files match *.txt but should have a last line that is a modeline.
au BufNewFile,BufRead *.txt
\ if getline('$') !~ 'vim:.*ft=help'
\| setf text
\| endif
" Blueprint markup files
au BufNewFile,BufRead *.blp setf blueprint
" Blueprint build system file
au BufNewFile,BufRead *.bp setf bp
" Use the filetype detect plugins. They may overrule any of the previously
" detected filetypes.
runtime! ftdetect/*.vim
" NOTE: The above command could have ended the filetypedetect autocmd group
" and started another one. Let's make sure it has ended to get to a consistent
" state.
augroup END
" Generic configuration file. Use FALLBACK, it's just guessing!
au filetypedetect BufNewFile,BufRead,StdinReadPost *
\ if !did_filetype() && expand("<amatch>") !~ g:ft_ignore_pat
\ && (expand("<amatch>") =~# '\.conf$'
\ || getline(1) =~ '^#' || getline(2) =~ '^#'
\ || getline(3) =~ '^#' || getline(4) =~ '^#'
\ || getline(5) =~ '^#') |
\ setf FALLBACK conf |
\ endif
" If the GUI is already running, may still need to install the Syntax menu.
" Don't do it when the 'M' flag is included in 'guioptions'.
if has("menu") && has("gui_running")
\ && !exists("did_install_syntax_menu") && &guioptions !~# "M"
source <sfile>:p:h/menu.vim
endif
" Function called for testing all functions defined here. These are
" script-local, thus need to be executed here.
" Returns a string with error messages (hopefully empty).
func TestFiletypeFuncs(testlist)
let output = ''
for f in a:testlist
try
exe f
catch
let output = output . "\n" . f . ": " . v:exception
endtry
endfor
return output
endfunc
" Restore 'cpoptions'
let &cpo = s:cpo_save
unlet s:cpo_save
" vim: ts=8
View Git Blame Copy Permalink