Problem: GNU extensions, such as `ifeq` and `wildcard` function, are
highlighted in BSDmakefile
Solution: detect BSD, GNU, or Microsoft implementation according to
filename, user-defined global variables, or file contents
closes: #17089
Co-authored-by: Roland Hieber <rohieb@users.noreply.github.com>
Signed-off-by: Eisuke Kawashima <e-kwsm@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Parts of the popup menu were rendered twice when the popup was
at maximum width because the truncation flag was being set too
liberally.
Solution: Make the truncation condition more precise by only setting it
when there's exactly one character of space remaining
(glepnir).
closes: #17108
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When switching to another window or tab page while the
completion menu is active, the menu stays visible, although it
belongs to the previous window/tab page context (Evgeni
Chasnovski).
Solution: Track the window and tab page where completion started. Detect
changes in the main editing loop and cancel completion mode if
the current window or tab page differs from where completion
started.
fixes: #17090closes: #17101
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: some man files are not recognized
(e.g. 1p (POSIX commands))
Solution: update the filetype detection pattern and detect more man
files as nroff (Eisuke Kawashima)
- sections are revised referring to
- debian-12:/etc/manpath.config
- fedora-41:/etc/man_db.conf
- detection logic is improved
- detection test is implemented
closes: #17117
Signed-off-by: Eisuke Kawashima <e-kwsm@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: missing out-of-memory check in linematch.c
Solution: return early in case of memory allocation failure, move the
pow() calculation ouside of the for() loop
(John Marriott)
closes: #17118
Signed-off-by: John Marriott <basilisk@internode.on.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Coverity warns about using uninitialized value
(Coverity, Tony Mechelynck, after v9.1.1301)
Solution: initialize callback pointer to NULL
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: completion: cannot configure completion functions with
'complete'
Solution: add support for setting completion functions using the f and o
flag for 'complete' (Girish Palya)
This change adds two new values to the `'complete'` (`'cpt'`) option:
- `f` – invokes the function specified by the `'completefunc'` option
- `f{func}` – invokes a specific function `{func}` (can be a string or `Funcref`)
These new flags extend keyword completion behavior (e.g., via `<C-N>` /
`<C-P>`) by allowing function-based sources to participate in standard keyword
completion.
**Key behaviors:**
- Multiple `f{func}` values can be specified, and all will be called in order.
- Functions should follow the interface defined in `:help complete-functions`.
- When using `f{func}`, escaping is required for spaces (with `\`) and commas
(with `\\`) in `Funcref` names.
- If a function sets `'refresh'` to `'always'`, it will be re-invoked on every
change to the input text. Otherwise, Vim will attempt to reuse and filter
existing matches as the input changes, which matches the default behavior of
other completion sources.
- Matches are inserted at the keyword boundary for consistency with other completion methods.
- If finding matches is time-consuming, `complete_check()` can be used to
maintain responsiveness.
- Completion matches are gathered in the sequence defined by the `'cpt'`
option, preserving source priority.
This feature increases flexibility of standard completion mechanism and may
reduce the need for external completion plugins for many users.
**Examples:**
Complete matches from [LSP](https://github.com/yegappan/lsp) client. Notice the use of `refresh: always` and `function()`.
```vim
set cpt+=ffunction("g:LspCompletor"\\,\ [5]). # maxitems = 5
def! g:LspCompletor(maxitems: number, findstart: number, base: string): any
if findstart == 1
return g:LspOmniFunc(findstart, base)
endif
return {words: g:LspOmniFunc(findstart, base)->slice(0, maxitems), refresh: 'always'}
enddef
autocmd VimEnter * g:LspOptionsSet({ autoComplete: false, omniComplete: true })
```
Complete matches from `:iabbrev`.
```vim
set cpt+=fAbbrevCompletor
def! g:AbbrevCompletor(findstart: number, base: string): any
if findstart > 0
var prefix = getline('.')->strpart(0, col('.') - 1)->matchstr('\S\+$')
if prefix->empty()
return -2
endif
return col('.') - prefix->len() - 1
endif
var lines = execute('ia', 'silent!')
if lines =~? gettext('No abbreviation found')
return v:none # Suppresses warning message
endif
var items = []
for line in lines->split("\n")
var m = line->matchlist('\v^i\s+\zs(\S+)\s+(.*)$')
if m->len() > 2 && m[1]->stridx(base) == 0
items->add({ word: m[1], info: m[2], dup: 1 })
endif
endfor
return items->empty() ? v:none :
items->sort((v1, v2) => v1.word < v2.word ? -1 : v1.word ==# v2.word ? 0 : 1)
enddef
```
**Auto-completion:**
Vim's standard completion frequently checks for user input while searching for
new matches. It is responsive irrespective of file size. This makes it
well-suited for smooth auto-completion. You can try with above examples:
```vim
set cot=menuone,popup,noselect inf
autocmd TextChangedI * InsComplete()
def InsComplete()
if getcharstr(1) == '' && getline('.')->strpart(0, col('.') - 1) =~ '\k$'
SkipTextChangedIEvent()
feedkeys("\<c-n>", "n")
endif
enddef
inoremap <silent> <c-e> <c-r>=<SID>SkipTextChangedIEvent()<cr><c-e>
def SkipTextChangedIEvent(): string
# Suppress next event caused by <c-e> (or <c-n> when no matches found)
set eventignore+=TextChangedI
timer_start(1, (_) => {
set eventignore-=TextChangedI
})
return ''
enddef
```
closes: #17065
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Co-authored-by: glepnir <glephunter@gmail.com>
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: wrong detection of -inf
Solution: correctly compare 4 characters and not 3
(John Marriott)
closes: #17109
Signed-off-by: John Marriott <basilisk@internode.on.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: mbsyncrc files are not recognized
Solution: detect isyncrc and "*.mbsyncrc" files as mbsync filetype,
include filetype and syntax plugin (Pierrick Guillaume)
mbsync is a command line application which synchronizes mailboxes;
currently Maildir and IMAP4 mailboxes are supported.
New messages, message deletions and flag changes can be propagated both ways;
the operation set can be selected in a fine-grained manner.
References:
mbsync syntax overview: mbsync manual (isync v1.4.4)
https://isync.sourceforge.io/mbsync.html
Upstream support for the mbsync filetype.
Original plugin: https://github.com/Fymyte/mbsync.vimcloses: #17103
Signed-off-by: Pierrick Guillaume <pguillaume@fymyte.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: define_function() is too long
Solution: refactor and split up into smaller functions
(Yegappan Lakshmanan)
closes: #17105
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: cursor_correct() calculates a valid cursor position which
is later changed by update_topline() and causes Ctrl-D
scrolling to be stuck (Daniel Steinberg, after v9.1.0258).
Solution: Update the valid cursor position before validating topline
(Luuk van Baal).
fixes: #17106closes: #17110
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Some parts of the tutor are outdated.
- For example, pressing `<Tab>` after typing `:e` does not complete the
command `:edit`, but shows a completion menu with the first entry being
`:earlier`.
closes: #17107
Signed-off-by: Phạm Bình An <phambinhanctb2004@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: clientserver: When in insert mode, a :stopinsert command
is not correctly processed (user202729)
Solution: If the :stopinsert command is received while waiting for
input, stuff the NOP key into the type-ahead buffer and
detect that :stopinsert was used in edit() so that the
cursor position is decremented.
fixes: #17016closes: #17024
Signed-off-by: Christian Brabandt <cb@256bit.org>
This has been bothering me quite for some time and I never knew why it
happened. Just today it occurred to me this might have been because of
the last-position-jump.
So I figured, let's fix it for everybody, not just me.
closes: #17092
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: gui tabline menu does not use confirm when closing tabs
Solution: use ":confirm tabclose" explicitly (JMcKiern)
closes: #17093
Signed-off-by: JMcKiern <jmckiern@tcd.ie>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: comment plugin does not handle 'exclusive' selection for
comment object (@mawkish)
Solution: handle special case selection='exclusive' for inline comment
object (Maxim Kim)
fixes: #17023closes: #17098
Signed-off-by: Maxim Kim <habamax@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Dash may not be installed on a BSD CI runner, list it in the
shebang line.
See #17084closes: #17094
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: too many strlen() calls in buffer.c
Solution: refactor buffer.c and remove strlen() calls
(John Marriott)
closes: #17063
Signed-off-by: John Marriott <basilisk@internode.on.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: missing cleanup in test_filetype.vim, wrong name in
test_plugin_matchparen
Solution: Add :bwipe corresponding to :split, rename test case
closes: #17088
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: no test for matchparen plugin with WinScrolled event
Solution: add missing test
closes: #10942
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem:
- Help tags provide a good way to navigate the Vim documentation, but
many help documents don't use them effectively. I think one of the
reasons is that help writers have to look up help tags manually with
`:help` command, which is not very convenient.
- 'iskeyword' is only set for help buffers opened by `:help` command.
That means if I'm editing a help file, I cannot jump to tag in same
file using `Ctrl-]` unless I manually set it, which is annoying.
Solution:
- Add omni completion for Vim help tags.
- Set 'iskeyword' for `ft-help`
closes: #17073
Co-authored-by: Christian Brabandt <cb@256bit.org>
Signed-off-by: Phạm Bình An <phambinhanctb2004@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Using wrong window in ll_resize_stack()
(after v9.1.1287)
Solution: Use "wp" instead of "curwin", even though they are always the
same value. Fix typos in documentation (zeertzjq).
closes: #17080
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Help files not detected when 'iskeyword' includes ":".
Solution: Do not use \< and \> in the pattern (zeertzjq).
fixes: #17069closes: #17071
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: no error message for missing method after "super."
Solution: output an error message, add a few more tests
(Yegappan Lakshmanan).
closes: #17070
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: not possible to configure the completion menu truncation
character
Solution: add the "trunc" suboption to the 'fillchars' setting to
configure the truncation indicator (glepnir).
closes: #17006
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: quickfix and location-list stack is limited to 10 items
Solution: add the 'chistory' and 'lhistory' options to configure a
larger quickfix/location list stack
(64-bitman)
closes: #16920
Co-authored-by: Hirohito Higashi <h.east.727@gmail.com>
Signed-off-by: 64-bitman <60551350+64-bitman@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Build and test failure without job feature
(lazypingu)
Solution: Adjust ifdefs, add CheckFeature job to tests
fixes: #17053closes: #17059
Signed-off-by: Christian Brabandt <cb@256bit.org>
