This might be a bug in Windows Vim, as when using the following command
it throws E480:
```
:com! -complete=file -nargs=1 :Echo echo <q-args>
:Echo ?
E480: No match ?
```
Work-around this by using `-nargs=*` to allow more arguments, even
though this is not completely correct.
fixes: #17029
Signed-off-by: Christian Brabandt <cb@256bit.org>
- "Demote" SecurityManager from the list of java.lang class
types to javaLangDeprecated.
- Reintroduce supported syntax-preview-feature numbers 455
and 476 as _new numbers_ 488 and 494, respectively.
References:
- https://openjdk.org/jeps/486 (Permanently Disable the Security Manager)
- https://openjdk.org/jeps/488 (Primitive Types in Patterns etc.)
- https://openjdk.org/jeps/494 (Module Import Declarations)
closes: #16977
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: regexp: max \U and \%U value is limited by INT_MAX but gives a
confusing error message (related: v8.1.0985).
Solution: give a better error message when the value reaches INT_MAX
When searching Vim allows to get up to 8 hex characters using the /\V
and /\%V regex atoms. However, when using "/\UFFFFFFFF" the code point is
already above what an integer variable can hold, which is 2,147,483,647.
Since patch v8.1.0985, Vim already limited the max codepoint to INT_MAX
(otherwise it caused a crash in the nfa regex engine), but instead of
error'ing out it silently fell back to parse the number as a backslash
value and not as a codepoint value and as such this "/[\UFFFFFFFF]" will
happily find a "\" or an literal "F". And this "/[\d127-\UFFFFFFFF]"
will error out as "reverse range in character class).
Interestingly, the max Unicode codepoint value is U+10FFFF which still
fits into an ordinary integer value, which means, that we don't even
need to parse 8 hex characters, but 6 should have been enough.
However, let's not limit Vim to search for only max 6 hex characters
(which would be a backward incompatible change), but instead allow all 8
characters and only if the codepoint reaches INT_MAX, give a more
precise error message (about what the max unicode codepoint value is).
This allows to search for "[\U7FFFFFFE]" (will likely return "E486
Pattern not found") and "[/\U7FFFFFF]" now errors "E1517: Value too
large, max Unicode codepoint is U+10FFFF".
While this change is straight forward on architectures where long is 8
bytes, this is not so simple on Windows or 32bit architectures where long
is 4 bytes (and therefore the test fails there). To account for that,
let's make use of the vimlong_T number type and make a few corresponding
changes in the regex engine code and cast the value to the expected data
type. This however may not work correctly on systems that doesn't have
the long long datatype (e.g. OpenVMS) and probably the test will fail
there.
fixes: #16949closes: #16994
Signed-off-by: Christian Brabandt <cb@256bit.org>
Previously it was using '\0' in sed which is non-portable and does not
work in macOS. Fix this by using the '$' (end-of-line) regex atom (which
needs to be doubled in the Makefile) to append at the end instead. An
alternative would have been to use '&' which is the more portable
version of '\0'.
closes: #16996
Signed-off-by: Yee Cheng Chin <ychin.git@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Typos in code and docs related to 'diffopt' "inline:".
(after v9.1.1243)
Solution: Fix typos and slightly improve the docs.
(zeertzjq)
closes: #16997
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: cannot set the maximum popup menu width
(Lucas Mior)
Solution: add the new global option value 'pummaxwidth'
(glepnir)
fixes: #10901closes: #16943
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Diff mode's inline highlighting is lackluster. It only
performs a line-by-line comparison, and calculates a single
shortest range within a line that could encompass all the
changes. In lines with multiple changes, or those that span
multiple lines, this approach tends to end up highlighting
much more than necessary.
Solution: Implement new inline highlighting modes by doing per-character
or per-word diff within the diff block, and highlight only the
relevant parts, add "inline:simple" to the defaults (which is
the old behaviour)
This change introduces a new diffopt option "inline:<type>". Setting to
"none" will disable all inline highlighting, "simple" (the default) will
use the old behavior, "char" / "word" will perform a character/word-wise
diff of the texts within each diff block and only highlight the
differences.
The new char/word inline diff only use the internal xdiff, and will
respect diff options such as algorithm choice, icase, and misc iwhite
options. indent-heuristics is always on to perform better sliding.
For character highlight, a post-process of the diff results is first
applied before we show the highlight. This is because a naive diff will
create a result with a lot of small diff chunks and gaps, due to the
repetitive nature of individual characters. The post-process is a
heuristic-based refinement that attempts to merge adjacent diff blocks
if they are separated by a short gap (1-3 characters), and can be
further tuned in the future for better results. This process results in
more characters than necessary being highlighted but overall less visual
noise.
For word highlight, always use first buffer's iskeyword definition.
Otherwise if each buffer has different iskeyword settings we would not
be able to group words properly.
The char/word diffing is always per-diff block, not per line, meaning
that changes that span multiple lines will show up correctly.
Added/removed newlines are not shown by default, but if the user has
'list' set (with "eol" listchar defined), the eol character will be be
highlighted correctly for the specific newline characters.
Also, add a new "DiffTextAdd" highlight group linked to "DiffText" by
default. It allows color schemes to use different colors for texts that
have been added within a line versus modified.
This doesn't interact with linematch perfectly currently. The linematch
feature splits up diff blocks into multiple smaller blocks for better
visual matching, which makes inline highlight less useful especially for
multi-line change (e.g. a line is broken into two lines). This could be
addressed in the future.
As a side change, this also removes the bounds checking introduced to
diff_read() as they were added to mask existing logic bugs that were
properly fixed in #16768.
closes: #16881
Signed-off-by: Yee Cheng Chin <ychin.git@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: if_python: no tuple data type support (after v9.1.1232)
Solution: Add support for using Vim tuple in the python interface
(Yegappan Lakshmanan)
closes: #16964
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim script is missing the tuple data type
Solution: Add support for the tuple data type
(Yegappan Lakshmanan)
closes: #16776
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Ctrl-C closes popup windows that have a filter callback,
but does not close popups without a filter callback.
Solution: Modified popup_do_filter() to also close popups without
filter callback when Ctrl-C is pressed (glepnir).
fixes: #16839closes: #16928
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Also, do not set g:is_kornshell when g:is_posix is set. BSD shells are
POSIX but many are derived from the ash shell.
closes: #16939
Signed-off-by: Mohamed Akram <mohd.akram@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: wrong translation for encoding failures because of using
literal "from" and "to" in the resulting error message
(RestorerZ)
Solution: use separate error messages for errors "from" and "to"
encoding errors.
fixes: #16898closes: #16918
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Strange error with type for matchfuzzy() "camelcase".
Solution: Show the error "Invalid value for argument camelcase" instead
of "Invalid argument: camelcase" (zeertzjq).
Note that using tv_get_string() will lead to confusion, as when the
value cannot be converted to a string tv_get_string() will also give an
error about that, but "camelcase" takes a boolean, not a string. Also
don't use tv_get_string() for the "limit" argument above.
closes: #16926
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When searching for "Cur", CamelCase matches like "lCursor" score
higher than exact prefix matches like Cursor, which is
counter-intuitive (Maxim Kim).
Solution: Add a 'camelcase' option to matchfuzzy() that lets users disable
CamelCase bonuses when needed, making prefix matches rank higher.
(glepnir)
fixes: #16504closes: #16797
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
So let's remove the symlink and copy the netrw documentation back into
runtime/doc directory. While at it, add a Makefile target to do this
whenever runtime/pack/dist/opt/netrw/doc/netrw.txt is updated.
fixes: #16878fixes: #16872
Co-authored-by: Brandon Maier <brandon.maier@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Fix grammar
- Use "matches" instead of "items" ("completion candidates" is used in
some other places, but it's a bit verbose)
- "When set" is a bit vague, instead use "For specified modes"
closes: #16871
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
"umask" is pronounce like "youmask", so having an "an" before it is a
bit strange. In other places in the help, "umask" is not preceded by
either "a" or "an", and sometimes preceded by "the".
Also, "Note" is usually followed either by ":" or "that" in builtin.txt,
so add a ":" after "Note".
closes: 16860
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: the highlight-yank plugin exmaple provided in the doc behaves
incorrectly when selection is set to exclusive.
Solution: use a unified offset of 1 and pass 'exclusive: false' to
getregionpos(), while at it, also clarify when the
TextYankPost autocommand triggers.
closes: #16866
Signed-off-by: Jim Zhou <jimzhouzzy@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
On man-db systems, complete with actual man sections and pages, instead
of shell commands.
I tried to come up with a portable solution for multiple man
implementations in https://github.com/vim/vim/discussions/16794 but I
think the differences between implementations were too large to do that
without overly complicated code. So instead, I implemented it for man-db
(which I think is common on Linux) and hopefully left it easier for
other people to implement it on other systems in the future if they want
to.
closes: #16843
Signed-off-by: David Mandelberg <david@mandelberg.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Test for patch 9.1.1186 doesn't fail without the patch.
Solution: Set 'nomodeline' in the test (zeertzjq).
closes: #16835
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: help files in git repos are not detected
Solution: detect */doc/*.txt files as help if they end with a help
modeline, even if 'modeline' is off
Here's how I checked that this would still detect vim's own help files
correctly:
$ find . -type f -path '*/doc/*.txt' \
> -exec awk '{ } ENDFILE { print FILENAME ":" $0; }' '{}' + |
> grep -v 'vim:.*\<\(ft\|filetype\)=help\>'
./src/libvterm/doc/seqs.txt: 23 DECSM 42 = DECNRCM, national/multinational character
closes: #16817
Signed-off-by: David Mandelberg <david@mandelberg.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: No cmdline completion for the 'completefuzzycollect' option
(after v9.1.1178)
Solution: Add cmdline completion for the 'completefuzzycollect' option,
improve its description in optwin.vim (zeertzjq).
closes: #16813
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: not possible to generate completion candidates using fuzzy
matching
Solution: add the 'completefuzzycollect' option for (some) ins-completion
modes (glepnir)
fixes#15296fixes#15295fixes#15294closes: #16032
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
