display test and split TX/RX added

ubitx_20/cat_libs.ino

@@ -384,7 +384,7 @@ void ReadEEPRom_FT817(byte fromType)
       //7A  6 ? ?
       //7A  7 SPL On/Off  0 = Off, 1 = On
 
-      CAT_BUFF[0] = (isSplitOn ? 0xFF : 0x7F);
+      CAT_BUFF[0] = (splitOn ? 0xFF : 0x7F);
       break;
     case 0xB3 : //
       CAT_BUFF[0] = 0x00;

ubitx_20/ubitx_20.ino

@@ -249,7 +249,6 @@ byte saveIntervalSec = 10;  //second
 unsigned long saveCheckTime = 0;
 unsigned long saveCheckFreq = 0;
 
-bool isSplitOn = false;
 byte cwDelayTime = 60;
 byte delayBeforeCWStartTime = 50;
 
@@ -298,7 +297,7 @@ byte userCallsignLength = 0;    //7 : display callsign at system startup, 6~0 :
  */
 boolean txCAT = false;        //turned on if the transmitting due to a CAT command
 char inTx = 0;                //it is set to 1 if in transmit mode (whatever the reason : cw, ptt or cat)
-char splitOn = 0;             //working split, uses VFO B as the transmit frequency, (NOT IMPLEMENTED YET)
+char splitOn = 0;             //working split, uses VFO B as the transmit frequency
 char keyDown = 0;             //in cw mode, denotes the carrier is being transmitted
 char isUSB = 0;               //upper sideband was selected, this is reset to the default for the 
                               //frequency when it crosses the frequency border of 10 MHz
@@ -507,6 +506,21 @@ void startTx(byte txMode, byte isDisplayUpdate){
     ritRxFrequency = frequency;
     setFrequency(ritTxFrequency);
   }
+  else if (splitOn == 1) {
+      if (vfoActive == VFO_B) {
+        vfoActive = VFO_A;
+        frequency = vfoA;
+        byteToMode(vfoA_mode);
+      }
+      else if (vfoActive == VFO_A){
+        vfoActive = VFO_B;
+        frequency = vfoB;
+        byteToMode(vfoB_mode);
+      }
+
+      setFrequency(frequency);
+  } //end of else
+  
 
   if (txMode == TX_CW){
     //turn off the second local oscillator and the bfo
@@ -535,6 +549,20 @@ void stopTx(){
 
   if (ritOn)
     setFrequency(ritRxFrequency);
+  else if (splitOn == 1) {
+      //vfo Change
+      if (vfoActive == VFO_B){
+        vfoActive = VFO_A;
+        frequency = vfoA;
+        byteToMode(vfoA_mode);
+      }
+      else if (vfoActive == VFO_A){
+        vfoActive = VFO_B;
+        frequency = vfoB;
+        byteToMode(vfoB_mode);
+      }
+      setFrequency(frequency);
+  } //end of else
   else
     setFrequency(frequency);
   
@@ -992,7 +1020,7 @@ void setup()
   
   //Serial.begin(9600);
   lcd.begin(16, 2);
-  printLineF(1, F("CECBT v0.31")); 
+  printLineF(1, F("CECBT v0.32")); 
 
   Init_Cat(38400, SERIAL_8N1);
   initMeter(); //not used in this build

ubitx_20/ubitx_idle.ino

@@ -98,7 +98,7 @@ void updateLine2Buffer()
   
       if (freqScrollPosition < 7)
       {
-        for (int i = 11; i > 0; i--)
+        for (int i = 11; i >= 0; i--)
           if (i - (7 - freqScrollPosition) >= 0)
             line2Buffer[i] = line2Buffer[i - (7 - freqScrollPosition)];
           else

ubitx_20/ubitx_menu.ino

@@ -235,6 +235,32 @@ void menuSidebandToggle(int btn){
   }
 }
 
+void menuSplitOnOff(int btn){
+  if (!btn){
+    if (splitOn == 0)
+      printLineF2(F("Split On?"));
+    else
+      printLineF2(F("Split Off?"));
+  }
+  else {
+      if (splitOn == 1){
+        splitOn = 0;
+        printLineF2(F("Split Off!"));
+      }
+      else {
+        splitOn = 1;
+        if (ritOn == 1)
+          ritOn = 0;
+        printLineF2(F("Split On!"));
+      }
+    delay_background(500, 0);
+    printLine2ClearAndUpdate();
+    menuOn = 0;
+  }
+}
+
+
+
 /*
 //Select CW Key Type by KD8CEC
 void menuSetupKeyType(int btn){
@@ -1025,7 +1051,7 @@ void doMenu(){
     btnState = btnDown();
 
     if (i > 0){
-      if (modeCalibrate && select + i < 170)
+      if (modeCalibrate && select + i < 180)
         select += i;
       if (!modeCalibrate && select + i < 80)
         select += i;
@@ -1067,8 +1093,10 @@ void doMenu(){
     else if (select < 150 && modeCalibrate)
       menuADCMonitor(btnState);
     else if (select < 160 && modeCalibrate)
-      menuTxOnOff(btnState, 0x01);      //TX OFF / ON
+      menuSplitOnOff(btnState);      //TX OFF / ON
     else if (select < 170 && modeCalibrate)
+      menuTxOnOff(btnState, 0x01);      //TX OFF / ON
+    else if (select < 180 && modeCalibrate)
       menuExit(btnState);
 
     Check_Cat(0);  //To prevent disconnections