fixed cw adc range bug

ubitx_20/cat_libs.ino

@@ -472,7 +472,7 @@ void WriteEEPRom_FT817(byte fromType)
         printLineF2(F("Sidetone set! CAT"));
         EEPROM.put(CW_SIDETONE, sideTone);
         delay(300);                       //If timeout errors occur in the calling software, remove them
-        printLine2("");                   //Ham radio deluxe is the only one that supports this feature yet. and ham radio deluxe has wait time as greater than 500ms
+        clearLine2();
       }
       break;
 
@@ -484,7 +484,8 @@ void WriteEEPRom_FT817(byte fromType)
         printLineF2(F("Sidetone set! CAT"));
         EEPROM.put(CW_SIDETONE, sideTone);
         delay(300);                   //If timeout errors occur in the calling software, remove them
-        printLine2("");               //Ham radio deluxe is the only one that supports this feature yet. and ham radio deluxe has wait time as greater than 500ms
+        clearLine2();
+        line2DisplayStatus = 0;
       }
       break;
 
@@ -504,7 +505,7 @@ void WriteEEPRom_FT817(byte fromType)
       printLineF2(F("CW Speed set!"));
       EEPROM.put(CW_DELAY, cwDelayTime);
       delay(300);
-      printLine2("");
+      clearLine2();
       break;
     case 0x62 : //
       //5-0  CW Speed (4-60 WPM) (#21) From 0 to 38 (HEX) with 0 = 4 WPM and 38 = 60 WPM (1 WPM steps)
@@ -513,7 +514,7 @@ void WriteEEPRom_FT817(byte fromType)
       printLineF2(F("CW Speed set!"));
       EEPROM.put(CW_SPEED, cwSpeed);
       delay(300);
-      printLine2("");
+      clearLine2();
 
       break;
       /*

ubitx_20/cw_autokey.ino

@@ -299,7 +299,11 @@ void controlAutoCW(){
           
           printLineFromEEPRom(0, 2, cwStartIndex + displayScrolStep + CW_DATA_OFSTADJ, cwEndIndex + CW_DATA_OFSTADJ); 
 
-          lcd.setCursor(0,0);
+          byte diplayAutoCWLine = 0;
+          if ((displayOption1 & 0x01) == 0x01)
+            diplayAutoCWLine = 1;
+          
+          lcd.setCursor(0, diplayAutoCWLine);
           lcd.write(byteToChar(selectedCWTextIndex));
           lcd.write(':');
           isNeedScroll = (cwEndIndex - cwStartIndex) > 14 ? 1 : 0;

ubitx_20/ubitx_20.ino

@@ -84,6 +84,7 @@
 #define PTT   (A3)
 #define ANALOG_KEYER (A6)
 #define ANALOG_SPARE (A7)
+#define ANALOG_SMETER (A7)  //by KD8CEC
 
 /** 
  * The Raduino board is the size of a standard 16x2 LCD panel. It has three connectors:
@@ -172,6 +173,10 @@ int count = 0;          //to generally count ticks, loops, etc
 #define CW_ADC_DASH_TO   355   //CW ADC Range DASH to           (Lower 8 bit)
 #define CW_ADC_BOTH_FROM 356   //CW ADC Range BOTH from         (Lower 8 bit)
 #define CW_ADC_BOTH_TO   357   //CW ADC Range BOTH to           (Lower 8 bit)
+#define CW_KEY_TYPE      358
+
+#define DISPLAY_OPTION1  361   //Display Option1
+#define DISPLAY_OPTION2  362   //Display Option2
 
 //Check Firmware type and version
 #define FIRMWAR_ID_ADDR 776 //776 : 0x59, 777 :0x58, 778 : 0x68 : Id Number, if not found id, erase eeprom(32~1023) for prevent system error.
@@ -258,6 +263,9 @@ byte isTxType = 0;    //000000[0 - isSplit] [0 - isTXStop]
 byte arTuneStep[5];
 byte tuneStepIndex; //default Value 0, start Offset is 0 because of check new user
 
+byte displayOption1 = 0;
+byte displayOption2 = 0;
+
 //CW ADC Range
 int cwAdcSTFrom = 0;
 int cwAdcSTTo = 0;
@@ -267,6 +275,10 @@ int cwAdcDashFrom = 0;
 int cwAdcDashTo = 0;
 int cwAdcBothFrom = 0;
 int cwAdcBothTo = 0;
+byte cwKeyType = 0; //0: straight, 1 : iambica, 2: iambicb
+bool Iambic_Key = true;
+#define IAMBICB 0x10 // 0 for Iambic A, 1 for Iambic B
+unsigned char keyerControl = IAMBICB;
 
 //Variables for auto cw mode
 byte isCWAutoMode = 0;          //0 : none, 1 : CW_AutoMode_Menu_Selection, 2 : CW_AutoMode Sending
@@ -296,6 +308,10 @@ unsigned long dbgCount = 0;   //not used now
 unsigned char txFilter = 0;   //which of the four transmit filters are in use
 boolean modeCalibrate = false;//this mode of menus shows extended menus to calibrate the oscillators and choose the proper
                               //beat frequency
+
+unsigned long beforeIdle_ProcessTime = 0; //for check Idle time
+byte line2DisplayStatus = 0;  //0:Clear, 1 : menu, 1: DisplayFrom Idle, 
+                              
 /**
  * Below are the basic functions that control the uBitx. Understanding the functions before 
  * you start hacking around
@@ -756,6 +772,24 @@ void initSettings(){
 
   //CW interval between TX and CW Start
   EEPROM.get(CW_START, delayBeforeCWStartTime);
+  EEPROM.get(CW_KEY_TYPE, cwKeyType);
+  if (cwKeyType > 2)
+    cwKeyType = 0;
+
+  if (cwKeyType == 0)
+    Iambic_Key = false;
+  else
+  {
+    Iambic_Key = true;
+    if (cwKeyType = 1)
+      keyerControl &= ~IAMBICB;
+    else
+      keyerControl |= IAMBICB;
+  }
+    
+
+  EEPROM.get(DISPLAY_OPTION1, displayOption1);
+  EEPROM.get(DISPLAY_OPTION2, displayOption2);
 
   //User callsign information
   if (EEPROM.read(USER_CALLSIGN_KEY) == 0x59)
@@ -923,6 +957,7 @@ void initPorts(){
 
   pinMode(PTT, INPUT_PULLUP);
   pinMode(ANALOG_KEYER, INPUT_PULLUP);
+  pinMode(ANALOG_SMETER, INPUT); //by KD8CEC
 
   pinMode(CW_TONE, OUTPUT);  
   digitalWrite(CW_TONE, 0);
@@ -958,7 +993,7 @@ void setup()
   
   //Serial.begin(9600);
   lcd.begin(16, 2);
-  printLineF(1, F("CECBT v0.30")); 
+  printLineF(1, F("CECBT v0.31")); 
 
   Init_Cat(38400, SERIAL_8N1);
   initMeter(); //not used in this build
@@ -972,7 +1007,7 @@ void setup()
   else {
     printLineF(0, F("uBITX v0.20")); 
     delay(500);
-    printLine2(""); 
+    clearLine2();
   }
   
   initPorts();     
@@ -1046,7 +1081,12 @@ void loop(){
       doRIT();
     else 
       doTuningWithThresHold();
+
+    if (isCWAutoMode == 0 && beforeIdle_ProcessTime < millis() - 200) {
+      idle_process();
+      beforeIdle_ProcessTime = millis();
     }
+  } //end of check TX Status
 
   //we check CAT after the encoder as it might put the radio into TX
   Check_Cat(inTx? 1 : 0);

ubitx_20/ubitx_factory_alignment.ino

@@ -14,6 +14,7 @@ void btnWaitForClick(){
 void factory_alignment(){
         
   factoryCalibration(1);
+  line2DisplayStatus = 1;
 
   if (calibration == 0){
     printLine2("Setup Aborted");

ubitx_20/ubitx_idle.ino

@@ -0,0 +1,30 @@
+/*************************************************************************
+  KD8CEC's uBITX Idle time Processing
+  Functions that run at times that do not affect TX, CW, and CAT
+  It is called in 1/10 time unit.
+-----------------------------------------------------------------------------
+   This program is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+**************************************************************************/
+
+
+void idle_process()
+{
+  //space for user graphic display
+  if (menuOn == 0)
+  {
+    //if line2DisplayStatus == 0 <-- this condition is clear Line, you can display any message
+  }
+}
+

ubitx_20/ubitx_keyer.ino

@@ -91,8 +91,6 @@ void cwKeyUp(){
 #define IAMBICB 0x10 // 0 for Iambic A, 1 for Iambic B
 enum KSTYPE {IDLE, CHK_DIT, CHK_DAH, KEYED_PREP, KEYED, INTER_ELEMENT };
 static long ktimer;
-bool Iambic_Key = true;
-unsigned char keyerControl = IAMBICB;
 unsigned char keyerState = IDLE;
 
 //Below is a test to reduce the keying error. do not delete lines
@@ -101,17 +99,17 @@ char update_PaddleLatch(byte isUpdateKeyState) {
   unsigned char tmpKeyerControl;
   int paddle = analogRead(ANALOG_KEYER);
 
-  if (paddle > cwAdcDashFrom && paddle < cwAdcDashTo)
+  if (paddle >= cwAdcDashFrom && paddle <= cwAdcDashTo)
     tmpKeyerControl |= DAH_L;
-  else if (paddle > cwAdcDotFrom && paddle < cwAdcDotTo)
+  else if (paddle >= cwAdcDotFrom && paddle <= cwAdcDotTo)
     tmpKeyerControl |= DIT_L;
-  else if (paddle > cwAdcBothFrom && paddle < cwAdcBothTo)
+  else if (paddle >= cwAdcBothFrom && paddle <= cwAdcBothTo)
     tmpKeyerControl |= (DAH_L | DIT_L) ;     
   else 
   {
     if (Iambic_Key)
       tmpKeyerControl = 0 ;
-    else if (paddle > cwAdcSTFrom && paddle < cwAdcSTTo)
+    else if (paddle >= cwAdcSTFrom && paddle <= cwAdcSTTo)
       tmpKeyerControl = DIT_L ;
      else
        tmpKeyerControl = 0 ; 

ubitx_20/ubitx_menu.ino

@@ -235,6 +235,7 @@ void menuSidebandToggle(int btn){
   }
 }
 
+/*
 //Select CW Key Type by KD8CEC
 void menuSetupKeyType(int btn){
   if (!btn && digitalRead(PTT) == HIGH){
@@ -269,6 +270,71 @@ void menuSetupKeyType(int btn){
     menuOn = 0;
   }
 }
+*/
+
+//Select CW Key Type by KD8CEC
+void menuSetupKeyType(int btn){
+  int knob = 0;
+  int selectedKeyType = 0;
+  int moveStep = 0;
+  if (!btn && digitalRead(PTT) == HIGH){
+        printLineF2(F("Change Key Type?"));
+  }
+  else {
+    printLineF2(F("Press PTT to set"));
+    delay_background(500, 0);
+    selectedKeyType = cwKeyType;
+    while(!btnDown() && digitalRead(PTT) == HIGH){
+
+      //Display Key Type
+      if (selectedKeyType == 0)
+        printLineF1(F("Straight"));
+      else if (selectedKeyType == 1)
+        printLineF1(F("IAMBICA"));
+      else if (selectedKeyType == 2)
+        printLineF1(F("IAMBICB"));
+
+      knob = enc_read();
+
+      if (knob != 0)
+      {
+        moveStep += (knob > 0 ? 1 : -1);
+        if (selectedKeyType > 0 && moveStep < -3) {
+          selectedKeyType--;
+          moveStep = 0;
+        }
+        else if (selectedKeyType < 2 && moveStep > 3) {
+          selectedKeyType++;
+          moveStep = 0;
+        }
+      }
+
+      Check_Cat(0);  //To prevent disconnections
+    }
+    
+    //save the setting
+    if (digitalRead(PTT) == LOW){
+      printLineF2(F("CW Key Type set!"));
+      cwKeyType = selectedKeyType;
+      EEPROM.put(CW_KEY_TYPE, cwKeyType);
+
+      if (cwKeyType == 0)
+        Iambic_Key = false;
+      else
+      {
+        Iambic_Key = true;
+        if (cwKeyType = 1)
+          keyerControl &= ~IAMBICB;
+        else
+          keyerControl |= IAMBICB;
+      }
+      delay_background(2000, 0);
+    }
+    
+    printLine2ClearAndUpdate();
+    menuOn = 0;
+  }
+}
 
 //Analog pin monitoring with CW Key and function keys connected.
 //by KD8CEC
@@ -734,7 +800,6 @@ void menuSetupCalibration(int btn){
   menuOn = 0;
 }
 
-
 void printCarrierFreq(unsigned long freq){
 
   memset(c, 0, sizeof(c));

ubitx_20/ubitx_ui.ino

@@ -116,6 +116,9 @@ void drawMeter(int8_t needle){
 
 // The generic routine to display one line on the LCD 
 void printLine(unsigned char linenmbr, const char *c) {
+  if ((displayOption1 & 0x01) == 0x01)
+    linenmbr = (linenmbr == 0 ? 1 : 0); //Line Toggle
+    
   if (strcmp(c, printBuff[linenmbr])) {     // only refresh the display when there was a change
     lcd.setCursor(0, linenmbr);             // place the cursor at the beginning of the selected line
     lcd.print(c);
@@ -145,6 +148,9 @@ void printLineF(char linenmbr, const __FlashStringHelper *c)
 
 #define LCD_MAX_COLUMN 16
 void printLineFromEEPRom(char linenmbr, char lcdColumn, byte eepromStartIndex, byte eepromEndIndex) {
+  if ((displayOption1 & 0x01) == 0x01)
+    linenmbr = (linenmbr == 0 ? 1 : 0); //Line Toggle
+  
   lcd.setCursor(lcdColumn, linenmbr);
 
   for (byte i = eepromStartIndex; i <= eepromEndIndex; i++)
@@ -168,6 +174,12 @@ void printLine2(const char *c){
   printLine(0,c);
 }
 
+void clearLine2()
+{
+  printLine2("");
+  line2DisplayStatus = 0;
+}
+
 //  short cut to print to the first line
 void printLine1Clear(){
   printLine(1,"");
@@ -179,6 +191,7 @@ void printLine2Clear(){
 
 void printLine2ClearAndUpdate(){
   printLine(0, "");
+  line2DisplayStatus = 0;  
   updateDisplay();
 }
 
@@ -251,18 +264,22 @@ void updateDisplay() {
   //  strcat(c, " TX");
   printLine(1, c);
 
+  byte diplayVFOLine = 1;
+  if ((displayOption1 & 0x01) == 0x01)
+    diplayVFOLine = 0;
+
   if ((vfoActive == VFO_A && ((isDialLock & 0x01) == 0x01)) ||
     (vfoActive == VFO_B && ((isDialLock & 0x02) == 0x02))) {
-    lcd.setCursor(5,1);
+    lcd.setCursor(5,diplayVFOLine);
     lcd.write((uint8_t)0);
   }
   else if (isCWAutoMode == 2){
-    lcd.setCursor(5,1);
+    lcd.setCursor(5,diplayVFOLine);
     lcd.write(0x7E);
   }
   else
   {
-    lcd.setCursor(5,1);
+    lcd.setCursor(5,diplayVFOLine);
     lcd.write(":");
   }