scrape/ubitx-v5d-xcvr
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

for Release Version 1.097

Browse Source
This commit is contained in:
phdlee 2018-08-06 13:59:55 +09:00
parent 7c1ee29500
commit e79dbdbbe7
4 changed files with 47 additions and 41 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
ubitx_20/ubitx.h
View File

@ -28,8 +28,8 @@
//#define UBITX_DISPLAY_LCD1602I //I2C type 16 x 02 LCD
//#define UBITX_DISPLAY_LCD1602I_DUAL //I2C type 16 x02 LCD Dual
//#define UBITX_DISPLAY_LCD2004P //24 x 04 LCD (Parallel)
//#define UBITX_DISPLAY_LCD2004I //I2C type 24 x 04 LCD
#define UBITX_DISPLAY_NEXTION //NEXTION LCD
#define UBITX_DISPLAY_LCD2004I //I2C type 24 x 04 LCD
//#define UBITX_DISPLAY_NEXTION //NEXTION LCD
//#define UBITX_DISPLAY_NEXTION_SAFE //Only EEProm Write 770~775
#define I2C_LCD_MASTER_ADDRESS_DEFAULT 0x27 //0x27 //DEFAULT, if Set I2C Address by uBITX Manager, read from EEProm
@ -187,7 +187,7 @@ extern byte I2C_LCD_SECOND_ADDRESS; //only using Dual LCD Mode
* ground and six pins. Each of these six pins can be individually programmed
* either as an analog input, a digital input or a digital output.
* The pins are assigned as follows (left to right, display facing you):
* Pin 1 (Violet), A7, SPARE
* Pin 1 (Violet), A7, SPARE => Analog S-Meter
* Pin 2 (Blue), A6, KEYER (DATA)
* Pin 3 (Green), +5v
* Pin 4 (Yellow), Gnd
@ -217,7 +217,7 @@ extern byte I2C_LCD_SECOND_ADDRESS; //only using Dual LCD Mode
* The second set of 16 pins on the Raduino's bottom connector are have the three clock outputs and the digital lines to control the rig.
* This assignment is as follows :
* Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
* GND +5V CLK0 GND GND CLK1 GND GND CLK2 GND D2 D3 D4 D5 D6 D7
* GND +5V CLK2 GND GND CLK1 GND GND CLK0 GND D2 D3 D4 D5 D6 D7
* These too are flexible with what you may do with them, for the Raduino, we use them to :
* - TX_RX line : Switches between Transmit and Receive after sensing the PTT or the morse keyer
* - CW_KEY line : turns on the carrier for CW

10
ubitx_20/ubitx_20.ino
View File

@ -1255,9 +1255,15 @@ void setup()
initSettings();
initPorts();
#ifndef USE_SW_SERIAL
#ifdef USE_SW_SERIAL
// if (userCallsignLength > 0 && ((userCallsignLength & 0x80) == 0x80))
// {
userCallsignLength = userCallsignLength & 0x7F;
// }
#else
//for Chracter LCD
if (userCallsignLength > 0 && ((userCallsignLength & 0x80) == 0x80)) {
if (userCallsignLength > 0 && ((userCallsignLength & 0x80) == 0x80))
{
userCallsignLength = userCallsignLength & 0x7F;
DisplayCallsign(userCallsignLength);
}

59
ubitx_20/ubitx_lcd_nextion.ino
View File

@ -230,16 +230,37 @@ void SendHeader(char varType, char varIndex)
}
}
#define INT_ETX 0
#define STR_ETX 1
#define TMP_ETX 2
//Send 0xFF, 0xFF, 0xFF
//etxType : INT_ETX = 0xFF, 0xFF, 0xFF
// STR_ETX = ", 0xFF, 0xFF, 0xFF
// TEMP_ETX = softTemp, 0xFF, 0xFF, 0xff
void SendCommandETX(char etxType)
{
if (etxType == 2)
{
SWSerial_Print(softTemp);
}
else if (etxType == 1)
{
SWSerial_Print("\"");
}
SWSerial_Write(0xff);
SWSerial_Write(0xff);
SWSerial_Write(0xff);
}
void SendCommandUL(char varIndex, unsigned long sendValue)
{
SendHeader(SWS_HEADER_INT_TYPE, varIndex);
memset(softTemp, 0, 20);
ultoa(sendValue, softTemp, DEC);
SWSerial_Print(softTemp);
SWSerial_Write(0xff);
SWSerial_Write(0xff);
SWSerial_Write(0xff);
SendCommandETX(TMP_ETX);
}
void SendCommandL(char varIndex, long sendValue)
@ -248,10 +269,7 @@ void SendCommandL(char varIndex, long sendValue)
memset(softTemp, 0, 20);
ltoa(sendValue, softTemp, DEC);
SWSerial_Print(softTemp);
SWSerial_Write(0xff);
SWSerial_Write(0xff);
SWSerial_Write(0xff);
SendCommandETX(TMP_ETX);
}
void SendCommandStr(char varIndex, char* sendValue)
@ -259,10 +277,7 @@ void SendCommandStr(char varIndex, char* sendValue)
SendHeader(SWS_HEADER_STR_TYPE, varIndex);
SWSerial_Print(sendValue);
SWSerial_Write('\"');
SWSerial_Write(0xFF);
SWSerial_Write(0xFF);
SWSerial_Write(0xFF);
SendCommandETX(STR_ETX);
}
//Send String data with duplicate check
@ -274,10 +289,7 @@ void SendTextLineBuff(char lineNumber)
SendHeader(SWS_HEADER_STR_TYPE, lineNumber + 0x30); //s0.txt, s1.txt
SWSerial_Print(softBuffLines[lineNumber]);
SWSerial_Write('\"');
SWSerial_Write(0xFF);
SWSerial_Write(0xFF);
SWSerial_Write(0xFF);
SendCommandETX(STR_ETX);
strcpy(softBuffSended[lineNumber], softBuffLines[lineNumber]);
}
@ -312,10 +324,7 @@ void SendEEPromData(char varIndex, int eepromStartIndex, int eepromEndIndex, cha
SWSerial_Write(EEPROM.read((offsetTtype == 0 ? USER_CALLSIGN_DAT : WSPR_MESSAGE1) + i));
}
SWSerial_Write('\"');
SWSerial_Write(0xFF);
SWSerial_Write(0xFF);
SWSerial_Write(0xFF);
SendCommandETX(STR_ETX);
}
uint8_t softBuff1Num[14] = {'p', 'm', '.', 'c', '0', '.', 'v', 'a', 'l', '=', 0, 0xFF, 0xFF, 0xFF};
@ -646,7 +655,6 @@ void updateDisplay() {
#define RESPONSE_EEPROM_STR 87 //String
const uint8_t ResponseHeader[11]={'p', 'm', '.', 's', 'h', '.', 't', 'x', 't', '=', '"'};
const uint8_t ResponseFooter[4]={'"', 0xFF, 0xFF, 0xFF};
const char HexCodes[16] = {'0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'a', 'b', 'c', 'd', 'e', 'f', };
//void sendSpectrumData(unsigned long startFreq, unsigned long incStep, int scanCount, int delayTime, int sendCount)
@ -719,9 +727,7 @@ void sendResponseData(int protocolType, unsigned long startFreq, unsigned int se
}
}
for (int i = 0; i < 4; i++)
SWSerial_Write(ResponseFooter[i]);
SendCommandETX(STR_ETX);
} //end of for
}
@ -995,12 +1001,7 @@ void idle_process()
#else
int newSMeter;
//VK2ETA S-Meter from MAX9814 TC pin
newSMeter = analogRead(ANALOG_SMETER) / 4;
//Faster attack, Slower release
//currentSMeter = (newSMeter > currentSMeter ? ((currentSMeter * 3 + newSMeter * 7) + 5) / 10 : ((currentSMeter * 7 + newSMeter * 3) + 5) / 10);
//currentSMeter = ((currentSMeter * 7 + newSMeter * 3) + 5) / 10;
currentSMeter = newSMeter;
scaledSMeter = 0;

9
ubitx_20/ubitx_ui.ino
View File

@ -290,11 +290,10 @@ int GetI2CSmeterValue(int valueType)
{
return Wire.read();
}
//else
//{
// delay(10);
// return Wire.read();
//}
else
{
return 0;
}
}