scrape/ubitx-v5d-xcvr
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Added SW Trigger, Spectrum Protocol, Get ADC Protocol

Browse Source
This commit is contained in:
phdlee 2018-06-11 22:06:42 +09:00
parent 72ccd3b0e4
commit 152b63a9ed
5 changed files with 131 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
ubitx_20/ubitx.h
View File

@ -64,6 +64,7 @@ extern byte I2C_LCD_SECOND_ADDRESS; //only using Dual LCD Mode
#undef ENABLE_ADCMONITOR
#endif
//==============================================================================
// Hardware, Define PIN Usage
//==============================================================================
@ -164,6 +165,7 @@ extern int currentSMeter; //ADC Value for S.Meter
extern byte scaledSMeter; //Calculated S.Meter Level
extern byte KeyValues[16][3]; //Set : Start Value, End Value, Key Type, 16 Set (3 * 16 = 48)
extern byte TriggerBySW; //Action Start from Nextion LCD, Other MCU
extern void printLine1(const char *c);
extern void printLine2(const char *c);

4
ubitx_20/ubitx_20.ino
View File

@ -192,7 +192,9 @@ byte I2C_LCD_SECOND_ADDRESS; //only using Dual LCD Mode
byte KeyValues[16][3];
byte isIFShift = 0; //1 = ifShift, 2 extend
int ifShiftValue = 0; //
int ifShiftValue = 0; //
byte TriggerBySW = 0; //Action Start from Nextion LCD, Other MCU
/**
* Below are the basic functions that control the uBitx. Understanding the functions before

123
ubitx_20/ubitx_lcd_nextion.ino
View File

@ -176,10 +176,15 @@ byte L_displayOption2; //byte displayOption2 (Reserve)
#define TS_CMD_RIT 6
#define TS_CMD_TXSTOP 7
#define TS_CMD_SDR 8
#define TS_CMD_LOCK 9 //Dial Lock
#define TS_CMD_ATT 10 //ATT
#define TS_CMD_IFS 11 //IFS Enabled
#define TS_CMD_IFSVALUE 12 //IFS VALUE
#define TS_CMD_LOCK 9 //Dial Lock
#define TS_CMD_ATT 10 //ATT
#define TS_CMD_IFS 11 //IFS Enabled
#define TS_CMD_IFSVALUE 12 //IFS VALUE
#define TS_CMD_STARTADC 13
#define TS_CMD_STOPADC 14
#define TS_CMD_SPECTRUMOPT 15 //Option for Spectrum
#define TS_CMD_SPECTRUM 16 //Get Spectrum Value
#define TS_CMD_SWTRIG 21 //SW Action Trigger for WSPR and more
char nowdisp = 0;
@ -190,6 +195,7 @@ char nowdisp = 0;
//Control must have prefix 'v' or 's'
char softSTRHeader[11] = {'p', 'm', '.', 's', '0', '.', 't', 'x', 't', '=', '\"'};
char softINTHeader[10] = {'p', 'm', '.', 'v', '0', '.', 'v', 'a', 'l', '='};
const byte ADCIndex[6] = {A0, A1, A2, A3, A6, A7};
//send data for Nextion LCD
void SendHeader(char varType, char varIndex)
@ -614,6 +620,60 @@ void updateDisplay() {
sendUIData(0); //UI
}
uint8_t SpectrumHeader[11]={'p', 'm', '.', 's', 'h', '.', 't', 'x', 't', '=', '"'};
uint8_t SpectrumFooter[4]={'"', 0xFF, 0xFF, 0xFF};
char HexCodes[16] = {'0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'a', 'b', 'c', 'd', 'e', 'f', };
void sendSpectrumData(unsigned long startFreq, unsigned long incStep, int scanCount, int delayTime, int sendCount)
{
unsigned long beforFreq = frequency;
unsigned long k;
uint8_t adcBytes[200]; //Maximum 200 Step
//Voltage drop
//scanResult[0] = analogRead(ANALOG_SMETER);
//adcBytes[0] = analogRead(ANALOG_SMETER);
//delay(10);
int readedValue = 0;
for (int si = 0; si < sendCount; si++)
//while(1)
{
for (int i = 0; i < 11; i++)
SWSerial_Write(SpectrumHeader[i]);
for (k = 0; k < scanCount; k ++)
{
//Sampling Range
//setScanFreq(startFreq + k * incStep);
setFrequency(startFreq + (k * incStep));
//Wait time for charging
delay(delayTime);
//ADC
readedValue = analogRead(ANALOG_SMETER);
if (readedValue>255)
{
readedValue=255;
}
SWSerial_Write(HexCodes[readedValue >> 4]);
SWSerial_Write(HexCodes[readedValue & 0xf]);
}
for (int i = 0; i < 4; i++)
SWSerial_Write(SpectrumFooter[i]);
} //end of for
}
//sendSpectrumData(unsigned long startFreq, unsigned int incStep, int scanCount, int delayTime, int sendCount)
//sendSpectrumData(frequency - (1000L * 50), 1000, 100, 0, 10);
int spectrumSendCount = 10; //count of full scan and Send
int spectrumDelayTime = 0; //Scan interval time
int spectrumScanCount = 100; //Maximum 200
unsigned long spectrumIncStep = 1000; //Increaase Step
// tern static uint8_t swr_receive_buffer[20];
extern uint8_t receivedCommandLength;
extern void SWSerial_Read(uint8_t * receive_cmdBuffer);
@ -711,6 +771,57 @@ void SWS_Process(void)
{
ifShiftValue = *(long *)(&swr_buffer[commandStartIndex + 4]);
}
else if (commandType == TS_CMD_STARTADC)
{
int startIndex = swr_buffer[commandStartIndex + 4];
int endIndex = swr_buffer[commandStartIndex + 5];
int adcCheckInterval = swr_buffer[commandStartIndex + 6] * 10;
int nowCheckIndex = startIndex;
while(1 == 1)
{
if (receivedCommandLength > 0)
{
//receivedCommandLength = 0;
break;
}
//SendCommandL('x', analogRead(ADCIndex[swr_buffer[commandStartIndex + 4]]));
SendCommandL('n', nowCheckIndex); //Index Input
SendCommandL('x', analogRead(ADCIndex[nowCheckIndex++]));
if (nowCheckIndex > endIndex)
nowCheckIndex = startIndex;
delay(adcCheckInterval);
} //end of while
}
else if (commandType == TS_CMD_STOPADC)
{
//None Action
return;
}
else if (commandType == TS_CMD_SPECTRUM)
{
//sendSpectrumData(unsigned long startFreq, unsigned int incStep, int scanCount, int delayTime, int sendCount)
//sendSpectrumData(frequency - (1000L * 50), 1000, 100, 0, 10);
//*(long *)(&swr_buffer[commandStartIndex + 4])
//sendSpectrumData(*(long *)(&swr_buffer[commandStartIndex + 4]), spectrumIncStep, spectrumScanCount, spectrumDelayTime, spectrumSendCount);
sendSpectrumData(*(long *)(&swr_buffer[commandStartIndex + 4]), 1000, 100, 0, 32);
}
else if (commandType == TS_CMD_SPECTRUMOPT)
{
//sendSpectrumData(unsigned long startFreq, unsigned int incStep, int scanCount, int delayTime, int sendCount)
//sendSpectrumData(frequency - (1000L * 50), 1000, 100, 0, 10);
spectrumSendCount = swr_buffer[commandStartIndex + 4]; //count of full scan and Send
spectrumDelayTime = swr_buffer[commandStartIndex + 5]; //Scan interval time
spectrumScanCount = swr_buffer[commandStartIndex + 6]; //Maximum 120
spectrumIncStep = swr_buffer[commandStartIndex + 7] * 10; //Increaase Step
}
else if (commandType == TS_CMD_SWTRIG)
{
TriggerBySW = 1; //Action Trigger by Software
}
setFrequency(frequency);
SetCarrierFreq();
@ -725,8 +836,6 @@ char checkCountSMeter = 0;
//execute interval : 0.25sec
void idle_process()
{
sendUIData(1);
//S-Meter Display
if (((displayOption1 & 0x08) == 0x08 && (sdrModeOn == 0)) && (++checkCountSMeter > SMeterLatency))
{
@ -750,6 +859,8 @@ void idle_process()
checkCountSMeter = 0; //Reset Latency time
} //end of S-Meter
sendUIData(1);
}
//When boot time, send data

1
ubitx_20/ubitx_menu.ino
View File

@ -1227,6 +1227,7 @@ void doMenu(){
//Below codes are origial code with modified by KD8CEC
menuOn = 2;
TriggerBySW = 0; //Nextion LCD and Other MCU
while (menuOn){
i = enc_read();

9
ubitx_20/ubitx_wspr.ino
View File

@ -147,9 +147,16 @@ void SendWSPRManage()
}
printLine1(c);
#ifdef USE_SW_SERIAL
SWS_Process();
if ((digitalRead(PTT) == 0) || (TriggerBySW == 1))
{
TriggerBySW = 0;
#else
if (digitalRead(PTT) == 0)
{
#endif
//SEND WSPR
//If you need to consider the Rit and Sprite modes, uncomment them below.
//remark = To reduce the size of the program