755 lines
22 KiB
C++
755 lines
22 KiB
C++
/*************************************************************************
|
|
KD8CEC's CAT Library for uBITX and HAM
|
|
This source code is written for uBITX, but it can also be used on other radios.
|
|
|
|
The CAT protocol is used by many radios to provide remote control to comptuers through
|
|
the serial port.
|
|
it is based on FT-817, uBITX's only protocol has been added and will be added in the future.
|
|
In addition, simple things such as FT-857 frequency control and PTT control can also be
|
|
transmitted to the FT-857 protocol.
|
|
|
|
This code refers to the following code.
|
|
- FT857D CAT Library, by Pavel Milanes, CO7WT, pavelmc@gmail.com
|
|
https://github.com/pavelmc/FT857d/
|
|
- Ham Radio Control Libraries, https://sourceforge.net/projects/hamlib/
|
|
- Not found protocols decription were analyzed using an RS-232 analyzer.
|
|
using FT-817 and
|
|
- http://www.ka7oei.com/ft817_meow.html <-- It was a great help here.
|
|
|
|
-----------------------------------------------------------------------------
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
**************************************************************************/
|
|
#define printLineF1(x) (printLineF(1, x))
|
|
#define printLineF2(x) (printLineF(0, x))
|
|
|
|
//for broken protocol
|
|
#define CAT_RECEIVE_TIMEOUT 500
|
|
|
|
#define CAT_MODE_LSB 0x00
|
|
#define CAT_MODE_USB 0x01
|
|
#define CAT_MODE_CW 0x02
|
|
#define CAT_MODE_CWR 0x03
|
|
#define CAT_MODE_AM 0x04
|
|
#define CAT_MODE_FM 0x08
|
|
#define CAT_MODE_DIG 0x0A
|
|
#define CAT_MODE_PKT 0x0C
|
|
#define CAT_MODE_FMN 0x88
|
|
|
|
#define ACK 0
|
|
|
|
unsigned int skipTimeCount = 0;
|
|
byte CAT_BUFF[5];
|
|
byte CAT_SNDBUFF[5];
|
|
|
|
void SendCatData(byte sendCount)
|
|
{
|
|
for (byte i = 0; i < sendCount; i++)
|
|
Serial.write(CAT_BUFF[i]);
|
|
//Serial.flush();
|
|
}
|
|
|
|
//PROTOCOL : 0x01
|
|
//Computer ->(frequency)-> TRCV CAT_BUFF
|
|
void CatSetFreq(byte fromType)
|
|
{
|
|
//CAT_BUFF
|
|
byte i;
|
|
unsigned long tempFreq = 0;
|
|
|
|
if (fromType == 2 || fromType == 3) {
|
|
Serial.write(ACK);
|
|
return;
|
|
}
|
|
|
|
//2 digit in 1 byte (4 bit + 4bit) * 4.5 byte
|
|
for (i = 0; i < 4; i++)
|
|
{
|
|
tempFreq *= 10;
|
|
tempFreq += CAT_BUFF[i] >> 4;
|
|
tempFreq *= 10;
|
|
tempFreq += CAT_BUFF[i] & 0x0f;
|
|
}
|
|
|
|
tempFreq *= 10;
|
|
tempFreq += CAT_BUFF[4] >> 4;
|
|
|
|
if (!inTx && (frequency != tempFreq))
|
|
{
|
|
//Check Frequency Range
|
|
if (tempFreq >= LOWEST_FREQ_DIAL && tempFreq <= HIGHEST_FREQ_DIAL)
|
|
{
|
|
setFrequency(tempFreq);
|
|
updateDisplay();
|
|
}
|
|
else
|
|
{
|
|
//KD8CEC
|
|
//Remark for rduce program size, if you need, you can remove remark,
|
|
//however alomost rig control software available 1.0 ~ 50Mhz
|
|
//printLine(0, "OUT OF RANGE!!!");
|
|
//delay_background(300, 0);
|
|
}
|
|
}
|
|
|
|
Serial.write(ACK);
|
|
}
|
|
|
|
//#define BCD_LEN 9
|
|
//PROTOCOL : 0x03
|
|
//Computer <-(frequency)-> TRCV CAT_BUFF
|
|
void CatGetFreqMode(unsigned long freq, byte fromType)
|
|
{
|
|
int i;
|
|
byte tmpValue;
|
|
unsigned BCD_LEN = 9;
|
|
|
|
if (BCD_LEN & 1) {
|
|
CAT_BUFF[BCD_LEN / 2] &= 0x0f;
|
|
CAT_BUFF[BCD_LEN / 2] |= (freq % 10) << 4;
|
|
|
|
freq /= 10;
|
|
}
|
|
for (i = (BCD_LEN / 2) - 1; i >= 0; i--) {
|
|
tmpValue = freq % 10;
|
|
freq /= 10;
|
|
tmpValue |= (freq % 10) << 4;
|
|
freq /= 10;
|
|
CAT_BUFF[i] = tmpValue;
|
|
}
|
|
|
|
//Mode Check
|
|
if (isUSB)
|
|
CAT_BUFF[4] = CAT_MODE_USB;
|
|
else
|
|
CAT_BUFF[4] = CAT_MODE_LSB;
|
|
|
|
SendCatData(5);
|
|
}
|
|
|
|
void CatSetSplit(boolean isSplit, byte fromType)
|
|
{
|
|
|
|
Serial.write(ACK);
|
|
}
|
|
|
|
void CatSetPTT(boolean isPTTOn, byte fromType)
|
|
{
|
|
if (fromType == 2 || fromType == 3) {
|
|
Serial.write(ACK);
|
|
return;
|
|
}
|
|
|
|
// Set PTT Mode
|
|
if (isPTTOn)
|
|
{
|
|
if (!inTx)
|
|
{
|
|
txCAT = true;
|
|
|
|
startTx(TX_SSB, 1);
|
|
//Exit menu, Memory Keyer... ETC
|
|
if (isCWAutoMode > 0) {
|
|
isCWAutoMode = 0;
|
|
printLineF2(F("AutoKey Exit/CAT"));
|
|
//delay_background(1000, 0);
|
|
}
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if (inTx)
|
|
{
|
|
stopTx();
|
|
txCAT = false;
|
|
}
|
|
}
|
|
|
|
Serial.write(ACK);
|
|
}
|
|
|
|
void CatVFOToggle(boolean isSendACK, byte fromType)
|
|
{
|
|
if (fromType != 2 && fromType != 3) {
|
|
menuVfoToggle(1, 0);
|
|
}
|
|
|
|
if (isSendACK)
|
|
Serial.write(ACK); //Time
|
|
}
|
|
|
|
void CatSetMode(byte tmpMode, byte fromType)
|
|
{
|
|
if (fromType == 2 || fromType == 3) {
|
|
Serial.write(ACK);
|
|
return;
|
|
}
|
|
|
|
if (!inTx)
|
|
{
|
|
if (tmpMode == CAT_MODE_USB)
|
|
{
|
|
isUSB = true;
|
|
}
|
|
else
|
|
{
|
|
isUSB = false;
|
|
}
|
|
|
|
setFrequency(frequency);
|
|
updateDisplay();
|
|
}
|
|
|
|
Serial.write(ACK);
|
|
}
|
|
|
|
//Read EEProm by uBITX Manager Software
|
|
void ReadEEPRom(byte fromType)
|
|
{
|
|
//5BYTES
|
|
//CAT_BUFF[0] [1] [2] [3] [4] //4 COMMAND
|
|
//0, 1 START ADDRESS
|
|
uint16_t eepromStartIndex = CAT_BUFF[0] + CAT_BUFF[1] * 256;
|
|
uint16_t eepromReadLength = CAT_BUFF[2] + CAT_BUFF[3] * 256;;
|
|
byte checkSum = 0;
|
|
byte read1Byte = 0;
|
|
|
|
Serial.write(0x02); //STX
|
|
checkSum = 0x02;
|
|
for (uint16_t i = 0; i < eepromReadLength; i++)
|
|
{
|
|
read1Byte = EEPROM.read(eepromStartIndex + i);
|
|
checkSum += read1Byte;
|
|
Serial.write(read1Byte);
|
|
}
|
|
Serial.write(checkSum);
|
|
Serial.write(ACK);
|
|
}
|
|
|
|
//Write just proecess 1byes
|
|
void WriteEEPRom(byte fromType)
|
|
{
|
|
//5BYTES
|
|
uint16_t eepromStartIndex = CAT_BUFF[0] + CAT_BUFF[1] * 256;
|
|
byte write1Byte = CAT_BUFF[2];
|
|
|
|
//Check Checksum
|
|
if (CAT_BUFF[3] != ((CAT_BUFF[0] + CAT_BUFF[1] + CAT_BUFF[2]) % 256))
|
|
{
|
|
Serial.write(0x56); //CHECK SUM ERROR
|
|
Serial.write(ACK);
|
|
}
|
|
else
|
|
{
|
|
EEPROM.write(eepromStartIndex, write1Byte);
|
|
Serial.write(0x77); //OK
|
|
Serial.write(ACK);
|
|
}
|
|
}
|
|
|
|
void ReadEEPRom_FT817(byte fromType)
|
|
{
|
|
byte temp0 = CAT_BUFF[0];
|
|
byte temp1 = CAT_BUFF[1];
|
|
|
|
CAT_BUFF[0] = 0;
|
|
CAT_BUFF[1] = 0;
|
|
|
|
switch (temp1)
|
|
{
|
|
case 0x45 : //
|
|
if (temp0 == 0x03)
|
|
{
|
|
CAT_BUFF[0] = 0x00;
|
|
CAT_BUFF[1] = 0xD0;
|
|
}
|
|
break;
|
|
case 0x47 : //
|
|
if (temp0 == 0x03)
|
|
{
|
|
CAT_BUFF[0] = 0xDC;
|
|
CAT_BUFF[1] = 0xE0;
|
|
}
|
|
break;
|
|
case 0x55 :
|
|
//0 : VFO A/B 0 = VFO-A, 1 = VFO-B
|
|
//1 : MTQMB Select 0 = (Not MTQMB), 1 = MTQMB ("Memory Tune Quick Memory Bank")
|
|
//2 : QMB Select 0 = (Not QMB), 1 = QMB ("Quick Memory Bank")
|
|
//3 :
|
|
//4 : Home Select 0 = (Not HOME), 1 = HOME memory
|
|
//5 : Memory/MTUNE select 0 = Memory, 1 = MTUNE
|
|
//6 :
|
|
//7 : MEM/VFO Select 0 = Memory, 1 = VFO (A or B - see bit 0)
|
|
CAT_BUFF[0] = 0x80 + (vfoActive == VFO_B ? 1 : 0);
|
|
CAT_BUFF[1] = 0x00;
|
|
break;
|
|
case 0x57 : //
|
|
//0 : 1-0 AGC Mode 00 = Auto, 01 = Fast, 10 = Slow, 11 = Off
|
|
//2 DSP On/Off 0 = Off, 1 = On (Display format)
|
|
//4 PBT On/Off 0 = Off, 1 = On (Passband Tuning)
|
|
//5 NB On/Off 0 = Off, 1 = On (Noise Blanker)
|
|
//6 Lock On/Off 0 = Off, 1 = On (Dial Lock)
|
|
//7 FST (Fast Tuning) On/Off 0 = Off, 1 = On (Fast tuning)
|
|
|
|
CAT_BUFF[0] = 0xC0;
|
|
CAT_BUFF[1] = 0x40;
|
|
break;
|
|
case 0x59 : // band select VFO A Band Select 0000 = 160 M, 0001 = 75 M, 0010 = 40 M, 0011 = 30 M, 0100 = 20 M, 0101 = 17 M, 0110 = 15 M, 0111 = 12 M, 1000 = 10 M, 1001 = 6 M, 1010 = FM BCB, 1011 = Air, 1100 = 2 M, 1101 = UHF, 1110 = (Phantom)
|
|
//http://www.ka7oei.com/ft817_memmap.html
|
|
//CAT_BUFF[0] = 0xC2;
|
|
//CAT_BUFF[1] = 0x82;
|
|
break;
|
|
case 0x5C : //Beep Volume (0-100) (#13)
|
|
CAT_BUFF[0] = 0xB2;
|
|
CAT_BUFF[1] = 0x42;
|
|
break;
|
|
case 0x5E :
|
|
//3-0 : CW Pitch (300-1000 Hz) (#20) From 0 to E (HEX) with 0 = 300 Hz and each step representing 50 Hz
|
|
//5-4 : Lock Mode (#32) 00 = Dial, 01 = Freq, 10 = Panel
|
|
//7-6 : Op Filter (#38) 00 = Off, 01 = SSB, 10 = CW
|
|
//CAT_BUFF[0] = 0x08;
|
|
CAT_BUFF[0] = sideTonePitch;
|
|
CAT_BUFF[1] = 0x25;
|
|
break;
|
|
case 0x61 : //Sidetone (Volume) (#44)
|
|
CAT_BUFF[0] = sideToneSub;
|
|
CAT_BUFF[1] = 0x08;
|
|
break;
|
|
case 0x5F : //
|
|
//4-0 CW Weight (1.:2.5-1:4.5) (#22) From 0 to 14 (HEX) with 0 = 1:2.5, incrementing in 0.1 weight steps
|
|
//5 420 ARS (#2) 0 = Off, 1 = On
|
|
//6 144 ARS (#1) 0 = Off, 1 = On
|
|
//7 Sql/RF-G (#45) 0 = Off, 1 = On
|
|
CAT_BUFF[0] = 0x32;
|
|
CAT_BUFF[1] = 0x08;
|
|
break;
|
|
case 0x60 : //CW Delay (10-2500 ms) (#17) From 1 to 250 (decimal) with each step representing 10 ms
|
|
CAT_BUFF[0] = cwDelayTime;
|
|
CAT_BUFF[1] = 0x32;
|
|
break;
|
|
case 0x62 : //
|
|
//5-0 CW Speed (4-60 WPM) (#21) From 0 to 38 (HEX) with 0 = 4 WPM and 38 = 60 WPM (1 WPM steps)
|
|
//7-6 Batt-Chg (6/8/10 Hours (#11) 00 = 6 Hours, 01 = 8 Hours, 10 = 10 Hours
|
|
//CAT_BUFF[0] = 0x08;
|
|
CAT_BUFF[0] = 1200 / cwSpeed - 4;
|
|
CAT_BUFF[1] = 0xB2;
|
|
break;
|
|
case 0x63 : //
|
|
//6-0 VOX Gain (#51) Contains 1-100 (decimal) as displayed
|
|
//7 Disable AM/FM Dial (#4) 0 = Enable, 1 = Disable
|
|
CAT_BUFF[0] = 0xB2;
|
|
CAT_BUFF[1] = 0xA5;
|
|
break;
|
|
case 0x64 : //
|
|
break;
|
|
case 0x67 : //6-0 SSB Mic (#46) Contains 0-100 (decimal) as displayed
|
|
CAT_BUFF[0] = 0xB2;
|
|
CAT_BUFF[1] = 0xB2;
|
|
break; case 0x69 : //FM Mic (#29) Contains 0-100 (decimal) as displayed
|
|
case 0x78 :
|
|
if (isUSB)
|
|
CAT_BUFF[0] = CAT_MODE_USB;
|
|
else
|
|
CAT_BUFF[0] = CAT_MODE_LSB;
|
|
|
|
if (CAT_BUFF[0] != 0) CAT_BUFF[0] = 1 << 5;
|
|
break;
|
|
case 0x79 : //
|
|
//1-0 TX Power (All bands) 00 = High, 01 = L3, 10 = L2, 11 = L1
|
|
//3 PRI On/Off 0 = Off, 1 = On
|
|
//DW On/Off 0 = Off, 1 = On
|
|
//SCN (Scan) Mode 00 = No scan, 10 = Scan up, 11 = Scan down
|
|
//ART On/Off 0 = Off, 1 = On
|
|
CAT_BUFF[0] = 0x00;
|
|
CAT_BUFF[1] = 0x00;
|
|
break;
|
|
case 0x7A : //SPLIT
|
|
//7A 0 HF Antenna Select 0 = Front, 1 = Rear
|
|
//7A 1 6 M Antenna Select 0 = Front, 1 = Rear
|
|
//7A 2 FM BCB Antenna Select 0 = Front, 1 = Rear
|
|
//7A 3 Air Antenna Select 0 = Front, 1 = Rear
|
|
//7A 4 2 M Antenna Select 0 = Front, 1 = Rear
|
|
//7A 5 UHF Antenna Select 0 = Front, 1 = Rear
|
|
//7A 6 ? ?
|
|
//7A 7 SPL On/Off 0 = Off, 1 = On
|
|
|
|
CAT_BUFF[0] = (isSplitOn ? 0xFF : 0x7F);
|
|
break;
|
|
case 0xB3 : //
|
|
CAT_BUFF[0] = 0x00;
|
|
CAT_BUFF[1] = 0x4D;
|
|
break;
|
|
|
|
}
|
|
|
|
// sent the data
|
|
SendCatData(2);
|
|
}
|
|
|
|
void WriteEEPRom_FT817(byte fromType)
|
|
{
|
|
//byte temp0 = CAT_BUFF[0];
|
|
byte temp1 = CAT_BUFF[1];
|
|
|
|
CAT_BUFF[0] = 0;
|
|
CAT_BUFF[1] = 0;
|
|
|
|
if (fromType == 2 || fromType == 3) {
|
|
SendCatData(2);
|
|
Serial.write(ACK);
|
|
return;
|
|
}
|
|
switch (temp1)
|
|
{
|
|
case 0x55 :
|
|
//0 : VFO A/B 0 = VFO-A, 1 = VFO-B
|
|
//1 : MTQMB Select 0 = (Not MTQMB), 1 = MTQMB ("Memory Tune Quick Memory Bank")
|
|
//2 : QMB Select 0 = (Not QMB), 1 = QMB ("Quick Memory Bank")
|
|
//3 :
|
|
//4 : Home Select 0 = (Not HOME), 1 = HOME memory
|
|
//5 : Memory/MTUNE select 0 = Memory, 1 = MTUNE
|
|
//6 :
|
|
//7 : MEM/VFO Select 0 = Memory, 1 = VFO (A or B - see bit 0)
|
|
if (CAT_BUFF[2] & 0x01) //vfoB
|
|
{
|
|
//nowVFO Check
|
|
if (vfoActive != VFO_B)
|
|
{
|
|
CatVFOToggle(false, fromType);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
//vfoA
|
|
if (vfoActive != VFO_A)
|
|
{
|
|
CatVFOToggle(false, fromType);
|
|
}
|
|
}
|
|
break;
|
|
/*
|
|
case 0x57 : //
|
|
//0 : 1-0 AGC Mode 00 = Auto, 01 = Fast, 10 = Slow, 11 = Off
|
|
//2 DSP On/Off 0 = Off, 1 = On (Display format)
|
|
//4 PBT On/Off 0 = Off, 1 = On (Passband Tuning)
|
|
//5 NB On/Off 0 = Off, 1 = On (Noise Blanker)
|
|
//6 Lock On/Off 0 = Off, 1 = On (Dial Lock)
|
|
//7 FST (Fast Tuning) On/Off 0 = Off, 1 = On (Fast tuning)
|
|
|
|
CAT_BUFF[0] = 0xC0;
|
|
CAT_BUFF[1] = 0x40;
|
|
break;
|
|
case 0x59 : // band select VFO A Band Select 0000 = 160 M, 0001 = 75 M, 0010 = 40 M, 0011 = 30 M, 0100 = 20 M, 0101 = 17 M, 0110 = 15 M, 0111 = 12 M, 1000 = 10 M, 1001 = 6 M, 1010 = FM BCB, 1011 = Air, 1100 = 2 M, 1101 = UHF, 1110 = (Phantom)
|
|
//http://www.ka7oei.com/ft817_memmap.html
|
|
//CAT_BUFF[0] = 0xC2;
|
|
//CAT_BUFF[1] = 0x82;
|
|
break;
|
|
case 0x5C : //Beep Volume (0-100) (#13)
|
|
CAT_BUFF[0] = 0xB2;
|
|
CAT_BUFF[1] = 0x42;
|
|
break;
|
|
*/
|
|
case 0x5E :
|
|
//3-0 : CW Pitch (300-1000 Hz) (#20) From 0 to E (HEX) with 0 = 300 Hz and each step representing 50 Hz
|
|
//5-4 : Lock Mode (#32) 00 = Dial, 01 = Freq, 10 = Panel
|
|
//7-6 : Op Filter (#38) 00 = Off, 01 = SSB, 10 = CW
|
|
sideTonePitch = (CAT_BUFF[2] & 0x0F);
|
|
|
|
if (sideTonePitch != 0 || sideToneSub != 0)
|
|
{
|
|
sideTone = (sideTonePitch * 50 + 300) + sideToneSub;
|
|
printLineF2(F("Sidetone set! CAT"));
|
|
EEPROM.put(CW_SIDETONE, sideTone);
|
|
delay(300); //If timeout errors occur in the calling software, remove them
|
|
printLine2(""); //Ham radio deluxe is the only one that supports this feature yet. and ham radio deluxe has wait time as greater than 500ms
|
|
}
|
|
break;
|
|
|
|
case 0x61 : //Sidetone (Volume) (#44)
|
|
sideToneSub = (CAT_BUFF[2] & 0x7F);
|
|
if (sideTonePitch != 0 || sideToneSub != 0)
|
|
{
|
|
sideTone = (sideTonePitch * 50 + 300) + sideToneSub;
|
|
printLineF2(F("Sidetone set! CAT"));
|
|
EEPROM.put(CW_SIDETONE, sideTone);
|
|
delay(300); //If timeout errors occur in the calling software, remove them
|
|
printLine2(""); //Ham radio deluxe is the only one that supports this feature yet. and ham radio deluxe has wait time as greater than 500ms
|
|
}
|
|
break;
|
|
|
|
/*
|
|
case 0x5F : //
|
|
//4-0 CW Weight (1.:2.5-1:4.5) (#22) From 0 to 14 (HEX) with 0 = 1:2.5, incrementing in 0.1 weight steps
|
|
//5 420 ARS (#2) 0 = Off, 1 = On
|
|
//6 144 ARS (#1) 0 = Off, 1 = On
|
|
//7 Sql/RF-G (#45) 0 = Off, 1 = On
|
|
CAT_BUFF[0] = 0x32;
|
|
CAT_BUFF[1] = 0x08;
|
|
break;
|
|
*/
|
|
case 0x60 : //CW Delay (10-2500 ms) (#17) From 1 to 250 (decimal) with each step representing 10 ms
|
|
//CAT_BUFF[0] = 0x19;
|
|
cwDelayTime = CAT_BUFF[2];
|
|
printLineF2(F("CW Speed set!"));
|
|
EEPROM.put(CW_DELAY, cwDelayTime);
|
|
delay(300);
|
|
printLine2("");
|
|
break;
|
|
case 0x62 : //
|
|
//5-0 CW Speed (4-60 WPM) (#21) From 0 to 38 (HEX) with 0 = 4 WPM and 38 = 60 WPM (1 WPM steps)
|
|
//7-6 Batt-Chg (6/8/10 Hours (#11) 00 = 6 Hours, 01 = 8 Hours, 10 = 10 Hours
|
|
cwSpeed = 1200 / ((CAT_BUFF[2] & 0x3F) + 4);
|
|
printLineF2(F("CW Speed set!"));
|
|
EEPROM.put(CW_SPEED, cwSpeed);
|
|
delay(300);
|
|
printLine2("");
|
|
|
|
break;
|
|
/*
|
|
case 0x63 : //
|
|
//6-0 VOX Gain (#51) Contains 1-100 (decimal) as displayed
|
|
//7 Disable AM/FM Dial (#4) 0 = Enable, 1 = Disable
|
|
CAT_BUFF[0] = 0xB2;
|
|
CAT_BUFF[1] = 0xA5;
|
|
break;
|
|
case 0x64 : //
|
|
//CAT_BUFF[0] = 0xA5;
|
|
//CAT_BUFF[1] = 0x00;
|
|
break;
|
|
case 0x67 : //6-0 SSB Mic (#46) Contains 0-100 (decimal) as displayed
|
|
CAT_BUFF[0] = 0xB2;
|
|
CAT_BUFF[1] = 0xB2;
|
|
//break; case 0x69 : //FM Mic (#29) Contains 0-100 (decimal) as displayed
|
|
//CAT_BUFF[0] = 0x32;
|
|
//CAT_BUFF[1] = 0x32;
|
|
//break;
|
|
case 0x78 :
|
|
CAT_BUFF[0] = catGetMode();
|
|
// check, it must be a bit argument
|
|
if (CAT_BUFF[0] != 0) CAT_BUFF[0] = 1<<5;
|
|
break;
|
|
case 0x79 : //
|
|
//1-0 TX Power (All bands) 00 = High, 01 = L3, 10 = L2, 11 = L1
|
|
//3 PRI On/Off 0 = Off, 1 = On
|
|
//DW On/Off 0 = Off, 1 = On
|
|
//SCN (Scan) Mode 00 = No scan, 10 = Scan up, 11 = Scan down
|
|
//ART On/Off 0 = Off, 1 = On
|
|
CAT_BUFF[0] = 0x00;
|
|
CAT_BUFF[1] = 0x00;
|
|
break;
|
|
case 0x7A : //SPLIT
|
|
//7A 0 HF Antenna Select 0 = Front, 1 = Rear
|
|
//7A 1 6 M Antenna Select 0 = Front, 1 = Rear
|
|
//7A 2 FM BCB Antenna Select 0 = Front, 1 = Rear
|
|
//7A 3 Air Antenna Select 0 = Front, 1 = Rear
|
|
//7A 4 2 M Antenna Select 0 = Front, 1 = Rear
|
|
//7A 5 UHF Antenna Select 0 = Front, 1 = Rear
|
|
//7A 6 ? ?
|
|
//7A 7 SPL On/Off 0 = Off, 1 = On
|
|
|
|
CAT_BUFF[0] = (isSplitOn ? 0xFF : 0x7F);
|
|
break;
|
|
case 0xB3 : //
|
|
CAT_BUFF[0] = 0x00;
|
|
CAT_BUFF[1] = 0x4D;
|
|
break;
|
|
*/
|
|
}
|
|
|
|
// sent the data
|
|
SendCatData(2);
|
|
Serial.write(ACK);
|
|
}
|
|
|
|
void CatRxStatus(byte fromType)
|
|
{
|
|
byte sMeterValue = 1;
|
|
|
|
/*
|
|
http://www.ka7oei.com/ft817_meow.html
|
|
Command E7 - Read Receiver Status: This command returns one byte. Its contents are valid only when the '817 is in receive mode and it should be ignored when transmitting.
|
|
The lower 4 bits (0-3) of this byte indicate the current S-meter reading. 00 refers to an S-Zero reading, 04 = S4, 09 = S9, 0A = "10 over," 0B = "20 over" and so on up to 0F.
|
|
Bit 4 contains no useful information.
|
|
Bit 5 is 0 in non-FM modes, and it is 0 if the discriminator is centered (within 3.5 kHz for standard FM) when in the FM, FMN, or PKT modes, and 1 if the receiver is off-frequency.
|
|
Bit 6 is 0 if the CTCSS or DCS is turned off (or in a mode where it is not available.) It is also 0 if there is a signal being receive and the correct CTCSS tone or DCS code is being decoded.
|
|
It is 1 if there is a signal and the CTCSS/DCS decoding is enable, but the wrong CTCSS tone, DCS code, or no CTCSS/DCS is present.
|
|
Bit 7 is 0 if there is a signal present, or 1 if the receiver is squelched.
|
|
*/
|
|
// The lower 4 bits (0-3) of this byte indicate the current S-meter reading. 00 refers to an S-Zero reading, 04 = S4, 09 = S9, 0A = "10 over," 0B = "20 over" and so on up to 0F.
|
|
CAT_BUFF[0] = sMeterValue & 0b00001111;
|
|
SendCatData(1);
|
|
}
|
|
|
|
|
|
void CatTxStatus(byte fromType)
|
|
{
|
|
boolean isHighSWR = false;
|
|
boolean isSplitOn = false;
|
|
|
|
/*
|
|
Inverted -> *ptt = ((p->tx_status & 0x80) == 0); <-- souce code in ft817.c (hamlib)
|
|
*/
|
|
CAT_BUFF[0] = ((inTx ? 0 : 1) << 7) +
|
|
((isHighSWR ? 1 : 0) << 6) + //hi swr off / on
|
|
((isSplitOn ? 1 : 0) << 5) + //Split on / off
|
|
(0 << 4) + //dummy data
|
|
0x08; //P0 meter data
|
|
|
|
SendCatData(1);
|
|
}
|
|
|
|
unsigned long rxBufferArriveTime = 0;
|
|
byte rxBufferCheckCount = 0;
|
|
|
|
//Prevent Stack Overflow
|
|
byte isProcessCheck_Cat = 0;
|
|
|
|
//fromType normal : 0, TX : 1, CW_STRAIGHT : 2, CW_PADDLE : 3, CW_AUTOMODE : 4
|
|
//if cw mode, no delay
|
|
void Check_Cat(byte fromType)
|
|
{
|
|
byte i;
|
|
|
|
//Check Serial Port Buffer
|
|
if (Serial.available() == 0)
|
|
{
|
|
//Set Buffer Clear status
|
|
rxBufferCheckCount = 0;
|
|
return;
|
|
}
|
|
else if (Serial.available() < 5)
|
|
{
|
|
//First Arrived
|
|
if (rxBufferCheckCount == 0)
|
|
{
|
|
rxBufferCheckCount = Serial.available();
|
|
rxBufferArriveTime = millis() + CAT_RECEIVE_TIMEOUT; //Set time for timeout
|
|
}
|
|
else if (rxBufferArriveTime < millis()) //timeout
|
|
{
|
|
//Clear Buffer
|
|
for (i = 0; i < Serial.available(); i++)
|
|
rxBufferCheckCount = Serial.read();
|
|
|
|
rxBufferCheckCount = 0;
|
|
}
|
|
else if (rxBufferCheckCount < Serial.available()) //increase buffer count, slow arrived
|
|
{
|
|
rxBufferCheckCount = Serial.available();
|
|
rxBufferArriveTime = millis() + CAT_RECEIVE_TIMEOUT; //Set time for timeout
|
|
}
|
|
return;
|
|
}
|
|
|
|
//Arived CAT DATA
|
|
for (i = 0; i < 5; i++)
|
|
CAT_BUFF[i] = Serial.read();
|
|
|
|
if (isProcessCheck_Cat == 1)
|
|
return;
|
|
|
|
isProcessCheck_Cat = 1;
|
|
|
|
//reference : http://www.ka7oei.com/ft817_meow.html
|
|
switch(CAT_BUFF[4])
|
|
{
|
|
//The stability has not been verified and there seems to be no need. so i remarked codes,
|
|
//if you need, unmark lines
|
|
/*
|
|
case 0x00 : //Lock On
|
|
if (isDialLock == 1) //This command returns 00 if it was unlocked, and F0 if already locked.
|
|
CAT_BUFF[0] = 0xF0;
|
|
else {
|
|
CAT_BUFF[0] = 0x00;
|
|
setDialLock(1, fromType);
|
|
}
|
|
Serial.write(CAT_BUFF[0]); //Time
|
|
break;
|
|
case 0x80 : //Lock Off
|
|
if (isDialLock == 0) //This command returns 00 if the '817 was already locked, and F0 (HEX) if already unlocked.
|
|
CAT_BUFF[0] = 0xF0;
|
|
else {
|
|
CAT_BUFF[0] = 0x00;
|
|
setDialLock(0, fromType);
|
|
}
|
|
Serial.write(CAT_BUFF[0]); //Time
|
|
break;
|
|
*/
|
|
|
|
case 0x01 : //Set Frequency
|
|
CatSetFreq(fromType);
|
|
break;
|
|
|
|
case 0x02 : //Split On
|
|
case 0x82: //Split Off
|
|
CatSetSplit(CAT_BUFF[4] == 0x02, fromType);
|
|
break;
|
|
|
|
case 0x03 : //Read Frequency and mode
|
|
CatGetFreqMode(frequency, fromType);
|
|
break;
|
|
|
|
case 0x07 : //Set Operating Mode
|
|
CatSetMode(CAT_BUFF[0], fromType);
|
|
break;
|
|
|
|
case 0x08 : //Set PTT_ON
|
|
case 0x88: //Set PTT Off
|
|
CatSetPTT(CAT_BUFF[4] == 0x08, fromType);
|
|
break;
|
|
|
|
case 0x81: //Toggle VFO
|
|
CatVFOToggle(true, fromType);
|
|
break;
|
|
|
|
case 0xDB: //Read uBITX EEPROM Data
|
|
ReadEEPRom(fromType); //Call by uBITX Manager Program
|
|
break;
|
|
case 0xBB: //Read FT-817 EEPROM Data (for comfirtable)
|
|
ReadEEPRom_FT817(fromType);
|
|
break;
|
|
|
|
case 0xDC: //Write uBITX EEPROM Data
|
|
WriteEEPRom(fromType); //Call by uBITX Manager Program
|
|
break;
|
|
case 0xBC: //Write FT-817 EEPROM Data (for comfirtable)
|
|
WriteEEPRom_FT817(fromType);
|
|
break;
|
|
|
|
case 0xE7 : //Read RX Status
|
|
CatRxStatus(fromType);
|
|
break;
|
|
case 0xF7: //Read TX Status
|
|
CatTxStatus(fromType);
|
|
break;
|
|
default:
|
|
/*
|
|
char buff[16];
|
|
sprintf(buff, "DEFAULT : %x", CAT_BUFF[4]);
|
|
printLine2(buff);
|
|
*/
|
|
Serial.write(ACK);
|
|
break;
|
|
} //end of switch
|
|
|
|
isProcessCheck_Cat = 0;
|
|
}
|
|
|
|
void Init_Cat(long baud, int portConfig)
|
|
{
|
|
Serial.begin(baud, portConfig);
|
|
Serial.flush();
|
|
}
|
|
|