update versioninfo.txt

VersionInfo.txt

@@ -0,0 +1,30 @@
+This file will guide you to change the source code file.
+For Windows-based Arduino IDE users, the directory name and the Main source file name must be the same.
+You do not need to learn github to download .hex files or source code that I release.
+However, if you want to see what I'm doing right now, you should use the github homepage.
+
+You do not need to learn git to suggest source code. If you give me an e-mail, I will correct it at any time.
+If you have not joined the BITX Group, join group. There will be discussions on various topics every day.
+I am getting a lot of hints from the group.
+
+Ian KD8CEC
+kd8cec@gmail.com
+==================================================================
+Files modified in Version1.074 Beta
+
+1.Delted Files.
+
+2.Added Files
+
+3.Modified Files
+  - ubitx_20.ino
+  - ubitx_ui.ino
+  - cat_libs.ino
+  - ubitx.h
+  - ubitx_eemap.h
+  - ubitx_lcd_1602.ino
+  - ubitx_lcd_1602Dual.ino
+  - ubitx_lcd_2004.ino
+  -ubitx_wspr.ino
+
+  

ubitx_20/cat_libs.ino

@@ -31,8 +31,8 @@
    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 **************************************************************************/
-#define printLineF1(x) (printLineF(1, x))
-#define printLineF2(x) (printLineF(0, x))
+
+#include "ubitx.h"
 
 //for broken protocol
 #define CAT_RECEIVE_TIMEOUT 500
@@ -654,7 +654,7 @@ void SetIFSValue(void)
 //void CatRxStatus(byte fromType) 
 void CatRxStatus(void)  //for remove warning
 {
-  byte sMeterValue = 1;
+  byte sMeterValue = 0;
 
   /*
     http://www.ka7oei.com/ft817_meow.html
@@ -667,6 +667,33 @@ void CatRxStatus(void)  //for remove warning
     Bit 7 is 0 if there is a signal present, or 1 if the receiver is squelched.
   */
   // The lower 4 bits (0-3) of this byte indicate the current S-meter reading.  00 refers to an S-Zero reading, 04 = S4, 09 = S9, 0A = "10 over," 0B = "20 over" and so on up to 0F.
+  //0~8
+  switch (scaledSMeter)
+  {
+  case 8 : sMeterValue = 0x0B;
+    break;
+  case 7 : sMeterValue = 0x0A;
+    break;
+  case 6 : sMeterValue = 0x09;
+    break;
+  case 5 : sMeterValue = 0x07;
+    break;
+  case 4 : sMeterValue = 0x05;
+    break;
+  case 3 : sMeterValue = 0x04;
+    break;
+  case 2 : sMeterValue = 0x02;
+    break;
+  case 1 : sMeterValue = 0x01;
+    break;
+  }
+
+/*
+  sMeterValue = (scaledSMeter * 2) -1;
+  if (sMeterValue > 0)
+    sMeterValue--;
+*/    
+   
   CAT_BUFF[0] = sMeterValue & 0b00001111;
   SendCatData(1);
 }

ubitx_20/ubitx.h

@@ -14,6 +14,9 @@
    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 **************************************************************************/
+#ifndef _UBITX_HEADER__
+#define _UBITX_HEADER__
+
 #include <Arduino.h>  //for Linux, On Linux it is case sensitive.
 
 //==============================================================================
@@ -33,8 +36,8 @@
 #define EXTEND_KEY_GROUP1           //MODE, BAND(-), BAND(+), STEP
 //#define EXTEND_KEY_GROUP2           //Numeric (0~9), Point(.), Enter  //Not supported in Version 1.0x
 
-#define ENABLE_FACTORYALIGN
-//#define ENABLE_ADCMONITOR   //Starting with Version 1.07, you can read ADC values directly from uBITX Manager. So this function is not necessary.
+//#define ENABLE_FACTORYALIGN
+#define ENABLE_ADCMONITOR   //Starting with Version 1.07, you can read ADC values directly from uBITX Manager. So this function is not necessary.
 
 extern byte I2C_LCD_MASTER_ADDRESS;        //0x27  //if Set I2C Address by uBITX Manager, read from EEProm
 extern byte I2C_LCD_SECOND_ADDRESS;         //only using Dual LCD Mode
@@ -146,6 +149,9 @@ extern byte I2C_LCD_SECOND_ADDRESS;         //only using Dual LCD Mode
 extern unsigned long frequency;
 extern byte WsprMSGCount;
 extern byte sMeterLevels[9];
+extern int currentSMeter;   //ADC Value for S.Meter
+extern byte scaledSMeter;   //Calculated S.Meter Level
+
 extern byte KeyValues[16][3];    //Set : Start Value, End Value, Key Type, 16 Set (3 * 16 = 48)
 
 extern void printLine1(const char *c);
@@ -172,3 +178,7 @@ extern void SendWSPRManage(void);
 extern char byteToChar(byte srcByte);
 extern void DisplayCallsign(byte callSignLength);
 extern void DisplayVersionInfo(const char* fwVersionInfo);
+
+#endif    //end of if header define
+
+

ubitx_20/ubitx_20.ino

@@ -6,7 +6,7 @@
 //    So I put + in the sense that it was improved one by one based on Original Firmware.
 //    This firmware has been gradually changed based on the original firmware created by Farhan, Jack, Jerry and others.
 
-#define FIRMWARE_VERSION_INFO F("+v1.073")  
+#define FIRMWARE_VERSION_INFO F("+v1.074")  
 #define FIRMWARE_VERSION_NUM 0x02       //1st Complete Project : 1 (Version 1.061), 2st Project : 2
 
 /**
@@ -182,6 +182,10 @@ byte line2DisplayStatus = 0;  //0:Clear, 1 : menu, 1: DisplayFrom Idle,
 char lcdMeter[17];
 byte sMeterLevels[9];
 
+//Current ADC Value for S.Meter, and S Meter Level
+int currentSMeter = 0;
+byte scaledSMeter = 0;
+
 byte I2C_LCD_MASTER_ADDRESS;        //0x27  //if Set I2C Address by uBITX Manager, read from EEProm
 byte I2C_LCD_SECOND_ADDRESS;         //only using Dual LCD Mode
 

ubitx_20/ubitx_eemap.h

@@ -15,6 +15,9 @@
    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 **************************************************************************/
+#ifndef _UBITX_EEPOM_HEADER__
+#define _UBITX_EEPOM_HEADER__
+
 //==============================================================================
 // Factory-shipped EEProm address
 // (factory Firmware)
@@ -125,3 +128,5 @@
 #define CW_DATA_OFSTADJ       CW_AUTO_DATA - USER_CALLSIGN_DAT   //offset adjust for ditect eeprom to lcd (basic offset is USER_CALLSIGN_DAT
 #define CW_STATION_LEN        1023  //value range : 4 ~ 30
 
+#endif    //end of if header define
+

ubitx_20/ubitx_lcd.h

@@ -0,0 +1,64 @@
+/*************************************************************************
+  header file for LCD by KD8CEC
+-----------------------------------------------------------------------------
+   This program is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+**************************************************************************/
+#ifndef _UBITX_LCD_HEADER__
+#define _UBITX_LCD_HEADER__
+
+//Common Defines *********************************************************
+#define LCD_CLEARDISPLAY 0x01
+#define LCD_RETURNHOME 0x02
+#define LCD_ENTRYMODESET 0x04
+#define LCD_DISPLAYCONTROL 0x08
+#define LCD_CURSORSHIFT 0x10
+#define LCD_FUNCTIONSET 0x20
+#define LCD_SETCGRAMADDR 0x40
+#define LCD_SETDDRAMADDR 0x80
+
+// flags for display entry mode
+#define LCD_ENTRYRIGHT 0x00
+#define LCD_ENTRYLEFT 0x02
+#define LCD_ENTRYSHIFTINCREMENT 0x01
+#define LCD_ENTRYSHIFTDECREMENT 0x00
+
+// flags for display on/off control
+#define LCD_DISPLAYON 0x04
+#define LCD_DISPLAYOFF 0x00
+#define LCD_CURSORON 0x02
+#define LCD_CURSOROFF 0x00
+#define LCD_BLINKON 0x01
+#define LCD_BLINKOFF 0x00
+
+// flags for display/cursor shift
+#define LCD_DISPLAYMOVE 0x08
+#define LCD_CURSORMOVE 0x00
+#define LCD_MOVERIGHT 0x04
+#define LCD_MOVELEFT 0x00
+
+// flags for function set
+#define LCD_8BITMODE 0x10
+#define LCD_4BITMODE 0x00
+#define LCD_2LINE 0x08
+#define LCD_1LINE 0x00
+#define LCD_5x10DOTS 0x04
+#define LCD_5x8DOTS 0x00
+
+// flags for backlight control
+#define LCD_BACKLIGHT 0x08
+#define LCD_NOBACKLIGHT 0x00
+
+#endif    //end of if header define
+
+

ubitx_20/ubitx_lcd_1602.ino

@@ -21,48 +21,7 @@
 
 **************************************************************************/
 #include "ubitx.h"
-
-//Common Defines *********************************************************
-#define LCD_CLEARDISPLAY 0x01
-#define LCD_RETURNHOME 0x02
-#define LCD_ENTRYMODESET 0x04
-#define LCD_DISPLAYCONTROL 0x08
-#define LCD_CURSORSHIFT 0x10
-#define LCD_FUNCTIONSET 0x20
-#define LCD_SETCGRAMADDR 0x40
-#define LCD_SETDDRAMADDR 0x80
-
-// flags for display entry mode
-#define LCD_ENTRYRIGHT 0x00
-#define LCD_ENTRYLEFT 0x02
-#define LCD_ENTRYSHIFTINCREMENT 0x01
-#define LCD_ENTRYSHIFTDECREMENT 0x00
-
-// flags for display on/off control
-#define LCD_DISPLAYON 0x04
-#define LCD_DISPLAYOFF 0x00
-#define LCD_CURSORON 0x02
-#define LCD_CURSOROFF 0x00
-#define LCD_BLINKON 0x01
-#define LCD_BLINKOFF 0x00
-
-// flags for display/cursor shift
-#define LCD_DISPLAYMOVE 0x08
-#define LCD_CURSORMOVE 0x00
-#define LCD_MOVERIGHT 0x04
-#define LCD_MOVELEFT 0x00
-
-// flags for function set
-#define LCD_8BITMODE 0x10
-#define LCD_4BITMODE 0x00
-#define LCD_2LINE 0x08
-#define LCD_1LINE 0x00
-#define LCD_5x10DOTS 0x04
-#define LCD_5x8DOTS 0x00
-
-// flags for backlight control
-#define LCD_BACKLIGHT 0x08
-#define LCD_NOBACKLIGHT 0x00
+#include "ubitx_lcd.h"
 
 //========================================================================
 //Begin of TinyLCD Library by KD8CEC
@@ -749,19 +708,15 @@ void DisplayMeter(byte meterType, byte meterValue, char drawPosition)
     
     LCD_SetCursor(drawPosition, lineNumber);
   
-    //for (int i = 0; i <26; i++) //meter 5 + +db 1 = 6
     LCD_Write(lcdMeter[0]);
     LCD_Write(lcdMeter[1]);
+    LCD_Write(lcdMeter[2]);
   }
 }
 
-byte testValue = 0;
 char checkCount = 0;
 char checkCountSMeter = 0;
 
-int currentSMeter = 0;
-byte scaledSMeter = 0;
-
 void idle_process()
 {
   //space for user graphic display
@@ -781,23 +736,17 @@ void idle_process()
       }
     }
 
-      //EX for Meters
-      /*
-      DisplayMeter(0, testValue++, 7);
-      if (testValue > 30)
-        testValue = 0;
-      */
-
     //S-Meter Display
     if (((displayOption1 & 0x08) == 0x08 && (sdrModeOn == 0)) && (++checkCountSMeter > SMeterLatency))
     {
       int newSMeter;
 
       //VK2ETA S-Meter from MAX9814 TC pin / divide 4 by KD8CEC for reduce EEPromSize
-      newSMeter = analogRead(ANALOG_SMETER);
+      newSMeter = analogRead(ANALOG_SMETER) / 4;
   
       //Faster attack, Slower release
-      currentSMeter = (newSMeter > currentSMeter ? ((currentSMeter * 3 + newSMeter * 7) + 5) / 10 : ((currentSMeter * 7 + newSMeter * 3) + 5) / 10) / 4;
+      //currentSMeter = (newSMeter > currentSMeter ? ((currentSMeter * 3 + newSMeter * 7) + 5) / 10 : ((currentSMeter * 7 + newSMeter * 3) + 5) / 10) / 4;
+      currentSMeter = newSMeter;
 
       scaledSMeter = 0;
       for (byte s = 8; s >= 1; s--) {
@@ -807,7 +756,7 @@ void idle_process()
         }
       }
   
-      DisplayMeter(0, scaledSMeter, 14);
+      DisplayMeter(0, scaledSMeter, 13);
       checkCountSMeter = 0; //Reset Latency time
     }   //end of S-Meter
     

ubitx_20/ubitx_lcd_1602Dual.ino

@@ -21,48 +21,7 @@
 
 **************************************************************************/
 #include "ubitx.h"
-
-//Common Defines *********************************************************
-#define LCD_CLEARDISPLAY 0x01
-#define LCD_RETURNHOME 0x02
-#define LCD_ENTRYMODESET 0x04
-#define LCD_DISPLAYCONTROL 0x08
-#define LCD_CURSORSHIFT 0x10
-#define LCD_FUNCTIONSET 0x20
-#define LCD_SETCGRAMADDR 0x40
-#define LCD_SETDDRAMADDR 0x80
-
-// flags for display entry mode
-#define LCD_ENTRYRIGHT 0x00
-#define LCD_ENTRYLEFT 0x02
-#define LCD_ENTRYSHIFTINCREMENT 0x01
-#define LCD_ENTRYSHIFTDECREMENT 0x00
-
-// flags for display on/off control
-#define LCD_DISPLAYON 0x04
-#define LCD_DISPLAYOFF 0x00
-#define LCD_CURSORON 0x02
-#define LCD_CURSOROFF 0x00
-#define LCD_BLINKON 0x01
-#define LCD_BLINKOFF 0x00
-
-// flags for display/cursor shift
-#define LCD_DISPLAYMOVE 0x08
-#define LCD_CURSORMOVE 0x00
-#define LCD_MOVERIGHT 0x04
-#define LCD_MOVELEFT 0x00
-
-// flags for function set
-#define LCD_8BITMODE 0x10
-#define LCD_4BITMODE 0x00
-#define LCD_2LINE 0x08
-#define LCD_1LINE 0x00
-#define LCD_5x10DOTS 0x04
-#define LCD_5x8DOTS 0x00
-
-// flags for backlight control
-#define LCD_BACKLIGHT 0x08
-#define LCD_NOBACKLIGHT 0x00
+#include "ubitx_lcd.h"
 
 //========================================================================
 //Begin of I2CTinyLCD Library for Dual LCD by KD8CEC
@@ -624,17 +583,13 @@ void DisplayMeter(byte meterType, byte meterValue, char drawPosition)
     LCD_Write('S');
       
     LCD_Write(':');
-    for (int i = 0; i < 6; i++) //meter 5 + +db 1 = 6
+    for (int i = 0; i < 7; i++)
       LCD_Write(lcdMeter[i]);
   }
 }
 
 
-byte testValue = 0;
 char checkCount = 0;
-
-int currentSMeter = 0;
-byte scaledSMeter = 0;
 char checkCountSMeter = 0;
 
 char beforeKeyType = -1;
@@ -717,12 +672,13 @@ void idle_process()
       int newSMeter;
       displaySDRON = 0;
   
-      //VK2ETA S-Meter from MAX9814 TC pin
-      newSMeter = analogRead(ANALOG_SMETER);
+      //VK2ETA S-Meter from MAX9814 TC pin / divide 4 by KD8CEC for reduce EEPromSize
+      newSMeter = analogRead(ANALOG_SMETER) / 4;
   
       //Faster attack, Slower release
       //currentSMeter = (newSMeter > currentSMeter ? ((currentSMeter * 3 + newSMeter * 7) + 5) / 10 : ((currentSMeter * 7 + newSMeter * 3) + 5) / 10);
-      currentSMeter = (currentSMeter * 3 + newSMeter * 7) / 10; //remarked becaused of have already Latency time
+      //currentSMeter = (currentSMeter * 3 + newSMeter * 7) / 10; //remarked becaused of have already Latency time
+      currentSMeter = newSMeter;
   
       scaledSMeter = 0;
       for (byte s = 8; s >= 1; s--) {

ubitx_20/ubitx_lcd_2004.ino

@@ -21,48 +21,7 @@
 
 **************************************************************************/
 #include "ubitx.h"
-
-//Common Defines *********************************************************
-#define LCD_CLEARDISPLAY 0x01
-#define LCD_RETURNHOME 0x02
-#define LCD_ENTRYMODESET 0x04
-#define LCD_DISPLAYCONTROL 0x08
-#define LCD_CURSORSHIFT 0x10
-#define LCD_FUNCTIONSET 0x20
-#define LCD_SETCGRAMADDR 0x40
-#define LCD_SETDDRAMADDR 0x80
-
-// flags for display entry mode
-#define LCD_ENTRYRIGHT 0x00
-#define LCD_ENTRYLEFT 0x02
-#define LCD_ENTRYSHIFTINCREMENT 0x01
-#define LCD_ENTRYSHIFTDECREMENT 0x00
-
-// flags for display on/off control
-#define LCD_DISPLAYON 0x04
-#define LCD_DISPLAYOFF 0x00
-#define LCD_CURSORON 0x02
-#define LCD_CURSOROFF 0x00
-#define LCD_BLINKON 0x01
-#define LCD_BLINKOFF 0x00
-
-// flags for display/cursor shift
-#define LCD_DISPLAYMOVE 0x08
-#define LCD_CURSORMOVE 0x00
-#define LCD_MOVERIGHT 0x04
-#define LCD_MOVELEFT 0x00
-
-// flags for function set
-#define LCD_8BITMODE 0x10
-#define LCD_4BITMODE 0x00
-#define LCD_2LINE 0x08
-#define LCD_1LINE 0x00
-#define LCD_5x10DOTS 0x04
-#define LCD_5x8DOTS 0x00
-
-// flags for backlight control
-#define LCD_BACKLIGHT 0x08
-#define LCD_NOBACKLIGHT 0x00
+#include "ubitx_lcd.h"
 
 //========================================================================
 //Begin of TinyLCD Library by KD8CEC
@@ -683,90 +642,16 @@ void DisplayMeter(byte meterType, byte meterValue, char drawPosition)
   if (meterType == 0 || meterType == 1 || meterType == 2)
   {
     drawMeter(meterValue);
-    //int lineNumber = 0;
-    //if ((displayOption1 & 0x01) == 0x01)
-    //lineNumber = 1;
     
     LCD_SetCursor(drawPosition, 2);
     LCD_Write('S');
     LCD_Write(':');
-    for (int i = 0; i < 6; i++) //meter 5 + +db 1 = 6
+    for (int i = 0; i < 7; i++) //meter 5 + +db 1 = 6
       LCD_Write(lcdMeter[i]);
   }
 }
 
-
-//meterType : 0 = S.Meter, 1 = Forward Power Meter, 2 = SWR Meter
-void DisplayMeter(byte meterType, int meterValue, char drawPosition)
-{
-
-#ifdef OPTION_SKINNYBARS //We want skinny meter bars with more text/numbers
-  memcpy(&(line2Buffer[drawPosition]), "        ", 8); //Blank that section of 8 characters first
-  if (meterType == 0) { //SWR meter
-    drawMeter(meterValue); //Only 2 characters
-    line2Buffer[drawPosition] = 'S';
-    byte sValue = round((float)meterValue * 1.5); //6 bars available only to show 9 S values
-    sValue = sValue > 9 ? 9 : sValue; //Max S9
-    line2Buffer[drawPosition + 1] = '0' +  sValue; //0 to 9
-    memcpy(&(line2Buffer[drawPosition + 2]), lcdMeter, 2); //Copy the S-Meter bars
-    //Add the +10, +20, etc...
-    if (meterValue > 6) {
-      //We are over S9
-      line2Buffer[drawPosition + 4] = '+';
-      line2Buffer[drawPosition + 5] = '0' +  meterValue - 6; //1,2,3 etc...
-      line2Buffer[drawPosition + 6] = '0';
-    }
-  } else if (meterType == 1) { //Forward Power
-    drawMeter(round((float)meterValue / 40)); //4 watts per bar
-    //meterValue contains power value x 10 (one decimal point)
-    line2Buffer[drawPosition] = 'P';
-    meterValue = meterValue > 999 ? 999 : meterValue; //Limit to 99.9 watts!!!!
-    //Remove decimal value and divide by 10
-    meterValue = round((float)meterValue / 10);
-    if (meterValue < 10) {
-      line2Buffer[drawPosition + 1] = ' ';
-      line2Buffer[drawPosition + 2] = '0' +  meterValue; //0 to 9
-    } else {
-      line2Buffer[drawPosition + 1] = '0' +  meterValue /  10;
-      line2Buffer[drawPosition + 2] = '0' +  (meterValue - ((meterValue / 10) * 10));
-    }
-    line2Buffer[drawPosition + 3] = 'W';
-    memcpy(&(line2Buffer[drawPosition + 4]), lcdMeter, 2); //Copy the S-Meter bars
-  } else { //SWR
-    drawMeter((int)(((float)meterValue - 21) / 100)); //no bar = < 1.2, then 1 bar = 1.2 to 2.2, 2 bars = 2.2 to 3.2, etc...
-    //meterValue contains SWR x 100 (two decimal point)
-    memcpy(&(line2Buffer[drawPosition]), "SWR", 3);
-    meterValue = round((float)meterValue / 10); //We now have swr x 10 (1 decimal point)
-    if (meterValue < 100) { //10 to 99, no decimal point
-      //Draw the decimal value
-      line2Buffer[drawPosition + 3] = '0' +  meterValue /  10;
-      line2Buffer[drawPosition + 4] = '.';
-      line2Buffer[drawPosition + 5] = '0' +  (meterValue - ((meterValue / 10) * 10));
-    } else {
-      memcpy(&(line2Buffer[drawPosition + 3]), "10+", 3); //over 10
-    }
-    memcpy(&(line2Buffer[drawPosition + 6]), lcdMeter, 2); //Copy the S-Meter bars
-  }
-#else //We want fat bars, easy to read, with less text/numbers
-  //Serial.print("In displaymeter, meterValue: "); Serial.println(meterValue);
-  drawMeter(meterValue);
-  //Always line 2
-  char sym = 'S';
-  if (meterType == 1) sym = 'P';
-  else if (meterType == 2) sym = 'R'; //For SWR
-  line2Buffer[drawPosition] = sym;
-  memcpy(&(line2Buffer[drawPosition + 1]), lcdMeter, 7);
-#endif //OPTION_SKINNYBARS
-
-}
-
-
-byte testValue = 0;
 char checkCount = 0;
-
-int currentSMeter = 0;
-//int sMeterLevels[] = {0, 5, 17, 41, 74, 140, 255, 365, 470};
-byte scaledSMeter = 0;
 char checkCountSMeter = 0;
 
 //execute interval : 0.25sec
@@ -810,10 +695,12 @@ void idle_process()
       int newSMeter;
       
       //VK2ETA S-Meter from MAX9814 TC pin
-      newSMeter = analogRead(ANALOG_SMETER);
+      newSMeter = analogRead(ANALOG_SMETER) / 4;
   
       //Faster attack, Slower release
-      currentSMeter = (newSMeter > currentSMeter ? ((currentSMeter * 3 + newSMeter * 7) + 5) / 10 : ((currentSMeter * 7 + newSMeter * 3) + 5) / 10);
+      //currentSMeter = (newSMeter > currentSMeter ? ((currentSMeter * 3 + newSMeter * 7) + 5) / 10 : ((currentSMeter * 7 + newSMeter * 3) + 5) / 10);
+      //currentSMeter = ((currentSMeter * 7 + newSMeter * 3) + 5) / 10;
+      currentSMeter = newSMeter;
   
       scaledSMeter = 0;
       for (byte s = 8; s >= 1; s--) {

ubitx_20/ubitx_ui.ino

@@ -95,7 +95,7 @@ void initMeter(){
 
   for (i = 0; i < 8; i++)
     tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i + 48);
-  LCD_CreateChar(6, tmpbytes);
+  LCD_CreateChar(7, tmpbytes);
 }
 
 
@@ -128,13 +128,23 @@ void drawMeter(int needle)
 {
 #ifdef OPTION_SKINNYBARS
   //Fill buffer with growing set of bars, up to needle value
+  lcdMeter[0] = 0x20;
+  lcdMeter[1] = 0x20;
   for (int i = 0; i < 6; i++) {
     if (needle > i)
       lcdMeter[i / 3] = byte(i + 1); //Custom characters above
-    else if (i == 1 || i == 4) {
-      lcdMeter[i / 3] = 0x20; //blank
-    }
+    //else if (i == 1 || i == 4) {
+    //  lcdMeter[i / 3] = 0x20; //blank
+    //}
   }
+
+  if (needle > 7) {
+    lcdMeter[2] = byte(7); //Custom character "++"
+  } else if (needle > 6) {
+    lcdMeter[2] = '+'; //"+"
+  } else lcdMeter[2] = 0x20;
+  
+  
 #else //Must be "fat" bars
   //Fill buffer with growing set of bars, up to needle value
   for (int i = 0; i < 6; i++) {
@@ -143,11 +153,13 @@ void drawMeter(int needle)
     else
       lcdMeter[i] = 0x20; //blank
   }
+
   if (needle > 7) {
     lcdMeter[6] = byte(7); //Custom character "++"
   } else if (needle > 6) {
-    lcdMeter[6] = 0x2B; //"+"
+    lcdMeter[6] = '+'; //"+"
   } else lcdMeter[6] = 0x20;
+  
 #endif //OPTION_FATBARS
 }
 

ubitx_20/ubitx_wspr.ino

@@ -113,22 +113,9 @@ void SendWSPRManage()
         EEPROM.get(bandBuffIndex, WsprTXFreq); 
         EEPROM.get(bandBuffIndex + 4, WsprMultiChan); 
 
-        /*
-        //3, 4, 5, 6, 7
-        Wspr_Reg1[3] = EEPROM.read(bandBuffIndex + 6);
-        Wspr_Reg1[4] = EEPROM.read(bandBuffIndex + 7);
-        Wspr_Reg1[5] = EEPROM.read(bandBuffIndex + 8);
-        Wspr_Reg1[6] = EEPROM.read(bandBuffIndex + 9);
-        Wspr_Reg1[7] = EEPROM.read(bandBuffIndex + 10);
-        */
         for (loopIndex = 3; loopIndex < 8; loopIndex++)
           Wspr_Reg1[loopIndex] = EEPROM.read(bandBuffIndex + loopIndex + 3);
 
-        /*
-        Wspr_Reg2[2] = EEPROM.read(bandBuffIndex + 11);
-        Wspr_Reg2[3] = EEPROM.read(bandBuffIndex + 12);
-        Wspr_Reg2[4] = EEPROM.read(bandBuffIndex + 13);
-        */
         //2, 3, 4
         for (loopIndex = 2; loopIndex < 5; loopIndex++)
           Wspr_Reg2[loopIndex] = EEPROM.read(bandBuffIndex + loopIndex + 9);
@@ -136,18 +123,32 @@ void SendWSPRManage()
         TX_MSNB_P2 = ((unsigned long)Wspr_Reg1[5] & 0x0F) << 16 | ((unsigned long)Wspr_Reg1[6]) << 8 | Wspr_Reg1[7];
       }
 
-      ltoa(WsprTXFreq, b, DEC);
       if (digitalRead(PTT) == 0)
         strcpy(c, "SEND: ");
       else
         strcpy(c, "PTT-> ");
 
-      strcat(c, b);
+      //ltoa(WsprTXFreq, b, DEC);
+      //strcat(c, b);
+
+      //display frequency, Frequency to String for KD8CEC
+      unsigned long tmpFreq = WsprTXFreq;
+      for (int i = 15; i >= 6; i--) {
+        if (tmpFreq > 0) {
+          if (i == 12 || i == 8) c[i] = '.';
+          else {
+            c[i] = tmpFreq % 10 + 0x30;
+            tmpFreq /= 10;
+          }
+        }
+        else
+          c[i] = ' ';
+      }
+
       printLine1(c);
       
       if (digitalRead(PTT) == 0)
       {
-        //printLineF1(F("Transmitting"));
         //SEND WSPR
         //If you need to consider the Rit and Sprite modes, uncomment them below.
         //remark = To reduce the size of the program