Merge pull request #21 from phdlee/version1.02

Version1.02

ubitx_20/ubitx_20.ino

@@ -749,9 +749,11 @@ void doRIT(){
   unsigned long old_freq = frequency;
 
   if (knob < 0)
-    frequency -= 100l;
+    frequency -= (arTuneStep[tuneStepIndex -1]);  //
+    //frequency -= 100l;
   else if (knob > 0)
-    frequency += 100;
+    frequency += (arTuneStep[tuneStepIndex -1]);  //
+    //frequency += 100;
  
   if (old_freq != frequency){
     setFrequency(frequency);
@@ -1116,11 +1118,6 @@ void setup()
     factory_alignment();
 }
 
-
-//for debug
-int dbgCnt = 0;
-byte flasher = 0;
-
 //Auto save Frequency and Mode with Protected eeprom life by KD8CEC
 void checkAutoSaveFreqMode()
 {
@@ -1139,21 +1136,8 @@ void checkAutoSaveFreqMode()
     //check time for Frequency auto save
     if (millis() - saveCheckTime > saveIntervalSec * 1000)
     {
-      /*
-      if (vfoActive == VFO_A)
-      {
-        vfoA = frequency;
-        vfoA_mode = modeToByte();
-        storeFrequencyAndMode(1);
-      }
-      else
-      {
-        vfoB = frequency;
-        vfoB_mode = modeToByte();
-        storeFrequencyAndMode(2);
-      }
-      */
       FrequencyToVFO(1);
+      saveCheckTime = 0;  //for reduce cpu use rate
     }
   }
 }
@@ -1180,11 +1164,11 @@ void loop(){
 
     if (isCWAutoMode == 0 && beforeIdle_ProcessTime < millis() - 250) {
       idle_process();
+      checkAutoSaveFreqMode();  //move here form out scope for reduce cpu use rate
       beforeIdle_ProcessTime = millis();
     }
   } //end of check TX Status
 
   //we check CAT after the encoder as it might put the radio into TX
   Check_Cat(inTx? 1 : 0);
-  checkAutoSaveFreqMode();
 }

ubitx_20/ubitx_keyer.ino

@@ -172,6 +172,9 @@ void cwKeyer(void){
           keyerControl &= ~(DIT_L + DAH_L); // clear both paddle latch bits
           keyerState = KEYED; // next state
           if (!inTx){
+            //DelayTime Option
+            delay_background(delayBeforeCWStartTime * 2, 2);
+            
             keyDown = 0;
             cwTimeout = millis() + cwDelayTime * 10;  //+ CW_TIMEOUT;
             startTx(TX_CW, 1);
@@ -212,6 +215,9 @@ void cwKeyer(void){
       if (update_PaddleLatch(0) == DIT_L) {
         // if we are here, it is only because the key is pressed
         if (!inTx){
+          //DelayTime Option
+          delay_background(delayBeforeCWStartTime * 2, 2);
+          
           keyDown = 0;
           cwTimeout = millis() + cwDelayTime * 10;  //+ CW_TIMEOUT; 
           startTx(TX_CW, 1);
@@ -229,13 +235,14 @@ void cwKeyer(void){
           keyDown = 0;
           stopTx();
         }
-        if (!cwTimeout)
-          return;
+        //if (!cwTimeout) //removed by KD8CEC
+        //   return;
         // got back to the beginning of the loop, if no further activity happens on straight key
         // we will time out, and return out of this routine 
         //delay(5);
-        delay_background(5, 3);
-        continue;
+        //delay_background(5, 3); //removed by KD8CEC
+        //continue;               //removed by KD8CEC
+        return;                   //Tx stop control by Main Loop
       }
 
       Check_Cat(2);

ubitx_20/ubitx_menu.ino

@@ -1345,7 +1345,7 @@ void doMenu(){
   //ADJUST TUNE STEP 
   if (btnDownTimeCount > PRESS_ADJUST_TUNE)
   {
-    printLineF1(F("Press to set step"));
+    printLineF1(F("Press to set"));
     isNeedDisplay = 1; //check to need display for display current value
     
     while (!btnDown())
@@ -1382,7 +1382,7 @@ void doMenu(){
       }
     } //end of while
 
-    printLineF2(F("Changed Step!"));
+    //printLineF2(F("Changed Step!")); //remarked for reduce program memory by KD8CEC
     //SAVE EEPROM
     EEPROM.put(TUNING_STEP, tuneStepIndex);
     delay_background(500, 0);