scrape/ubitx-upr
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Apply DSP meter to all lcd types

Browse Source
This commit is contained in:
phdlee 2018-07-17 20:41:17 +09:00
parent b984f62dfd
commit c27bbf1b6b
6 changed files with 77 additions and 56 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

23
ubitx_20/ubitx.h
View File

@ -35,6 +35,8 @@
#define I2C_LCD_MASTER_ADDRESS_DEFAULT 0x27 //0x27 //DEFAULT, if Set I2C Address by uBITX Manager, read from EEProm
#define I2C_LCD_SECOND_ADDRESS_DEFAULT 0x3F //0x27 //only using Dual LCD Mode
//Select betwen Analog S-Meter and DSP (I2C) Meter
//#define USE_I2CSMETER
#define EXTEND_KEY_GROUP1 //MODE, BAND(-), BAND(+), STEP
//#define EXTEND_KEY_GROUP2 //Numeric (0~9), Point(.), Enter //Not supported in Version 1.0x
@ -120,6 +122,24 @@ extern byte I2C_LCD_SECOND_ADDRESS; //only using Dual LCD Mode
#define TX_LPF_C (3) //Relay
#define CW_KEY (2)
//******************************************************
//DSP (I2C) Meter
//******************************************************
//S-Meter Address
#define I2CMETER_ADDR 0x58
//VALUE TYPE============================================
//Signal
#define I2CMETER_CALCS 0x59 //Calculated Signal Meter
#define I2CMETER_UNCALCS 0x58 //Uncalculated Signal Meter
//Power
#define I2CMETER_CALCP 0x57 //Calculated Power Meter
#define I2CMETER_UNCALCP 0x56 //UnCalculated Power Meter
//SWR
#define I2CMETER_CALCR 0x55 //Calculated SWR Meter
#define I2CMETER_UNCALCR 0x54 //Uncalculated SWR Meter
//==============================================================================
// for public, Variable, functions
//==============================================================================
@ -196,6 +216,9 @@ extern char byteToChar(byte srcByte);
extern void DisplayCallsign(byte callSignLength);
extern void DisplayVersionInfo(const char* fwVersionInfo);
//I2C Signal Meter, Version 1.097
extern int GetI2CSmeterValue(int valueType); //ubitx_ui.ino
#endif //end of if header define

4
ubitx_20/ubitx_lcd_1602.ino
View File

@ -738,6 +738,9 @@ void idle_process()
{
int newSMeter;
#ifdef USE_I2CSMETER
scaledSMeter = GetI2CSmeterValue(I2CMETER_CALCS);
#else
//VK2ETA S-Meter from MAX9814 TC pin / divide 4 by KD8CEC for reduce EEPromSize
newSMeter = analogRead(ANALOG_SMETER) / 4;
@ -752,6 +755,7 @@ void idle_process()
break;
}
}
#endif
DisplayMeter(0, scaledSMeter, 13);
checkCountSMeter = 0; //Reset Latency time

5
ubitx_20/ubitx_lcd_1602Dual.ino
View File

@ -669,6 +669,9 @@ void idle_process()
int newSMeter;
displaySDRON = 0;
#ifdef USE_I2CSMETER
scaledSMeter = GetI2CSmeterValue(I2CMETER_CALCS);
#else
//VK2ETA S-Meter from MAX9814 TC pin / divide 4 by KD8CEC for reduce EEPromSize
newSMeter = analogRead(ANALOG_SMETER) / 4;
@ -684,9 +687,9 @@ void idle_process()
break;
}
}
#endif
DisplayMeter(0, scaledSMeter, 0);
checkCountSMeter = 0;
} //end of S-Meter
_Addr = I2C_LCD_MASTER_ADDRESS;

4
ubitx_20/ubitx_lcd_2004.ino
View File

@ -691,6 +691,9 @@ void idle_process()
{
int newSMeter;
#ifdef USE_I2CSMETER
scaledSMeter = GetI2CSmeterValue(I2CMETER_CALCS);
#else
//VK2ETA S-Meter from MAX9814 TC pin
newSMeter = analogRead(ANALOG_SMETER) / 4;
@ -706,6 +709,7 @@ void idle_process()
break;
}
}
#endif
DisplayMeter(0, scaledSMeter, 0);
checkCountSMeter = 0; //Reset Latency time

63
ubitx_20/ubitx_lcd_nextion.ino
View File

@ -1,5 +1,8 @@
/*************************************************************************
KD8CEC's uBITX Display Routine for Nextion LCD
Uses the default protocol of Nextion LCD.
Do not assign a 2 byte address to Nextion LCD.
-----------------------------------------------------------------------------
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@ -56,53 +59,6 @@ void LCD_Init(void)
//initMeter(); //for Meter Display
}
//===================================================================
//I2C Signal Meter, Version 1.097
//
//===================================================================
#define USE_I2CSMETER
//S-Meter Address
#define I2CMETER_ADDR 0x58
//VALUE TYPE============================================
//Signal
#define I2CMETER_CALCS 0x59 //Calculated Signal Meter
#define I2CMETER_UNCALCS 0x58 //Uncalculated Signal Meter
//Power
#define I2CMETER_CALCP 0x57 //Calculated Power Meter
#define I2CMETER_UNCALCP 0x56 //UnCalculated Power Meter
//SWR
#define I2CMETER_CALCR 0x55 //Calculated SWR Meter
#define I2CMETER_UNCALCR 0x54 //Uncalculated SWR Meter
// 0xA0 ~ 0xCF : CW Decode Mode + 100Hz ~
// 0xD0 ~ 0xF3 : RTTY Decode Mode + 100Hz ~
// 0x10 ~ 0x30 : Spectrum Mode
int GetI2CSmeterValue(int valueType)
{
if (valueType > 0)
{
Wire.beginTransmission(I2CMETER_ADDR); //j : S-Meter
Wire.write(valueType); //Y : Get Value Type
Wire.endTransmission();
}
Wire.requestFrom(I2CMETER_ADDR, 1);
for (int i = 0; i < 100; i++)
{
if (Wire.available() > 0)
{
return Wire.read();
}
else
{
delay(1);
}
}
}
//===================================================================
//Begin of Nextion LCD Protocol
//
@ -678,6 +634,9 @@ void updateDisplay() {
sendUIData(0); //UI
}
//****************************************************************
// Spectrum for Range scan and Band Scan
//****************************************************************
#define RESPONSE_SPECTRUM 0
#define RESPONSE_EEPROM 1
#define RESPONSE_EEPROM_HEX_F 89 //C Language order
@ -686,8 +645,8 @@ void updateDisplay() {
const uint8_t ResponseHeader[11]={'p', 'm', '.', 's', 'h', '.', 't', 'x', 't', '=', '"'};
const uint8_t ResponseFooter[4]={'"', 0xFF, 0xFF, 0xFF};
const char HexCodes[16] = {'0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'a', 'b', 'c', 'd', 'e', 'f', };
//void sendSpectrumData(unsigned long startFreq, unsigned long incStep, int scanCount, int delayTime, int sendCount)
//sendResponseData(RESPONSE_EEPROM, 0, eepromIndex, eepromReadLength, eepromDataType, 1);
//protocol Type : 0 - Spectrum, 1 : EEProm
@ -764,17 +723,15 @@ void sendResponseData(int protocolType, unsigned long startFreq, unsigned int se
} //end of for
}
//sendSpectrumData(unsigned long startFreq, unsigned int incStep, int scanCount, int delayTime, int sendCount)
//sendSpectrumData(frequency - (1000L * 50), 1000, 100, 0, 10);
//****************************************************************
//Receive command and processing from External device (LCD or MCU)
//****************************************************************
int spectrumSendCount = 10; //count of full scan and Send
int spectrumOffset = 0; //offset position
int spectrumScanCount = 100; //Maximum 200
unsigned int spectrumIncStep = 1000; //Increaase Step
// tern static uint8_t swr_receive_buffer[20];
extern uint8_t receivedCommandLength;
extern void SWSerial_Read(uint8_t * receive_cmdBuffer);
//extern void byteToMode(byte modeValue, byte autoSetModebyFreq);
uint8_t swr_buffer[20];
//SoftwareSerial_Process

30
ubitx_20/ubitx_ui.ino
View File

@ -268,4 +268,34 @@ int enc_read(void) {
return(result);
}
//===================================================================
//I2C Signal Meter, Version 1.097
//===================================================================
// 0xA0 ~ 0xCF : CW Decode Mode + 100Hz ~
// 0xD0 ~ 0xF3 : RTTY Decode Mode + 100Hz ~
// 0x10 ~ 0x30 : Spectrum Mode
int GetI2CSmeterValue(int valueType)
{
if (valueType > 0)
{
Wire.beginTransmission(I2CMETER_ADDR); //j : S-Meter
Wire.write(valueType); //Y : Get Value Type
Wire.endTransmission();
}
Wire.requestFrom(I2CMETER_ADDR, 1);
for (int i = 0; i < 100; i++)
{
if (Wire.available() > 0)
{
return Wire.read();
}
else
{
delay(1);
}
}
}