31 lines
1.3 KiB
Python
31 lines
1.3 KiB
Python
|
from __future__ import absolute_import
|
||
|
|
from __future__ import division
|
||
|
|
# These are the configuration parameters for receiving the
|
||
|
|
# 10.7 MHz IF output of the AOR AR8600 receiver with the
|
||
|
|
# SDR-IQ by RfSpace. This results in a 100 kHz to 3 GHz
|
||
|
|
# wide range receiver with pan adapter.
|
||
|
|
|
||
|
|
# Please do not change this sample file.
|
||
|
|
# Instead copy it to your own .quisk_conf.py and make changes there.
|
||
|
|
# See quisk_conf_defaults.py for more information.
|
||
|
|
|
||
|
|
# Use this hardware module to control the AR8600 and SDR-IQ
|
||
|
|
import quisk_hardware_sdr8600 as quisk_hardware
|
||
|
|
|
||
|
|
# Start in FM mode
|
||
|
|
default_mode = 'FM'
|
||
|
|
|
||
|
|
use_sdriq = 1 # Use the SDR-IQ
|
||
|
|
#sdriq_name = "/dev/ft2450" # Name of the SDR-IQ device to open
|
||
|
|
sdriq_name = "/dev/ttyUSB2" # Name of the SDR-IQ device to open
|
||
|
|
sdriq_clock = 66666667.0 # actual sample rate (66666667 nominal)
|
||
|
|
sdriq_decimation = 1250 # Must be 360, 500, 600, or 1250
|
||
|
|
sample_rate = int(float(sdriq_clock) / sdriq_decimation + 0.5) # Don't change this
|
||
|
|
name_of_sound_capt = "" # We do not capture from the soundcard
|
||
|
|
name_of_sound_play = "hw:0" # Play back on this soundcard
|
||
|
|
# Note: For the SDR-IQ, playback is stereo at 48000 Hertz.
|
||
|
|
channel_i = 0 # Soundcard index of left channel
|
||
|
|
channel_q = 1 # Soundcard index of right channel
|
||
|
|
display_fraction = 0.85 # The edges of the full bandwidth are not valid
|
||
|
|
|